BIRED/02/e-NIQ(1st call) of 2025-2026

Amount

SUB-HEAD 1 -- SITC of DG SET SITC of 40KVA, 415V, 50Hz 3Phase Silent Diesel Generator Set with Microprocessor based AMF Control Panel, comprising of Engine, Alternator, Separate AMF Control Panel, Base frame, Fuel tank, Battery, CPCB-II approved Engine & Acoustic Enclosure having following specifications:-(Make: Cummins /Volvo Penta/Ashok Layland/ Crompton Greaves). Engine:- Engine Type: 4 Stroke Diesel Engine, RPM:1500, Rated Output: 52 BHP or Higher, Duty: Continuous Cooling: Coolant with radiator, Cylinder: 4, Inline, Aspiration: Turbo Charged inter cooled Type of Governor: Electrnoic, Fuel Tank Capacity: Minimum Capacity 140 Ltrs Over Load Capacity: 10% Overload for one hourfor every 12 hourscontinuous running at Full load or better Safety Controls:Emergency Stop, Low Lube Oil Pressure warings/Shutdown, High Engine Water Temp warning/Shutdown, sensor failure Indicator, Engine over speed indicator, Battery Charging and Low barttery indicator, Exhaust Silencer: Residental Type Starting System: 12V starting system complete with starter motor, charging alternator with rectifier and Cut-out as per manufacturer standard Battery: Lead Acid, Low Maintenance or SMF and conforming to relevant IS Specification with Low/High Battery Voltage and Weak BATTERY WARNING. Alternator:- Make:Stamford/Leroy somer/Crompton Greaves Rating: 415V,3PH 50Hz, 40KVA ,1500rpm, Type:Brushlress,Self Excited and self regulated, Insulation: Calss H Protection: screen-protected drip proof with Min IP-23 degree of protection RPM:1500, Voltage Regulation(max) : _+ 1% at full load, Winding Connection: Star with Neutral, Total Harmonic distortion in output waveform:<5%

AMF Control Panel (CPRI Approved):- Cubical type floor mounted AMF Control Panel made from 14SWG Sheet Steel, duly pretreated, powder coated painted and aesthetically finished, suitable for controlling of 40KVA DG set having following specification/ features. Manufactured by the OEM/CPRI/Approved Panel builder. 2 Nos. 63Amps, 4Pole, Power Contactor for DG & Mains. 1 Nos. 63Amps, 4Pole, 36ka, MCCB for DG. 1 No. Bypass (Inside the AMF Panel) by 63 Amps Changeover Switch. A) Required 6A-SP & 16A-DP MCB of 10Ka B) Indicating lamps 230V AC (LED type) - Mains ON (RYB), DG ON (RYB), Mains Load ON/DG Load ON C) Push Button - DG Start/Stop, Breaker ON/Off, D) Aux. Relay as required., E) 3Phase Voltage monitoring Relay. F) ON Delay Timer, Coil voltage 230AC, G) Auto Trickle & Boost type Battery charger, 12V H) Microprocessor based AMF Controller having all inbuilt display features for engine & alternator and protections for Engine & alternator, J) Hooter for engine & alterntor shutdown features., K) Make - OEM Make. Acoustic Enclosure Specially designed to meet stringent MOEF/CPCB Norms of 75dBA @ 1Mtr. At 75% load under free field conditions. The Acoustic Enclosure is made of CRCA sheets and structural sheet metal base frame painted in black. a) High quality noise absorbant and fire retardant grade acoustic insulation material (PU Foam/Rock Wool complying to IS:8183. b) Two point lifting for easy handling at customer site. c) Designed to have optimum serviceability. d) Air inlet louvers specially designed to operaate at rated load. e) 9/11 tank pretreatment process and UV resistant Powder coating of all parts to withstand extreme environment. f) Use of special hardware for longer life. g) Fluid drains for lube oil and fuel, h) Fuel filling arrangement inside the enclosure.

Terms & Conditions (i) Rate should be quoted inclusive of all applicable taxes and Duty etc. (ii) All materials, equipments & accessories must conform to relivent IS specifications. The DG set to be supplied must be from the authorized OEM of the respective Engine Manufacturer. (iii) Nacessary manufacturer's test certificate for Diesel Engine, Alternator etc. will have to submit in triplicate copy during delivery for the equipment. (iv) Copy of "Type Approval Certificate" must be produced at the time of delivery issued from component Authority (As per CPCB-II) (v) Circuit Diagram for AMF panel must be submitted from the Manufacturer/OEM. (vi) The entire set must be warranted at least 60 months/8000 Hours from the date of Delivery whichever is earlier (without Rubber Items & Battery). (vii) Documents that authenticates such procurement from the Manufacturer / OEM or from their authorized sales channel and standard warranty / support should be sent from the e-mail of the Manufacturer / OEM / authorized sales channel to the e-mail of Engineer-in-Charge and hard copy of it to be submitted during execution, of work/submission of bill. If any refurbished material is supplied and installed, penal action will be taken as per existing rules

S & F exhaust pipe of 100 mm. dia MS black pipe (Thickness 4 mm) including connection with the existing silencer attached with the flexible coupler and S&F flange, nuts, bolts & washers etc. & necessary fixing materials etc. as required from DG set to nearest building (Horizontal Run) with suitable high temperature painting.

S&F exhaust pipe of 100 mm. black pipe (thickness 4 mm.) including S&F flange, nuts, bolts & washers etc. as required from the nearest building wall to top of the building roof. (Vertical run) with suitable high temperature painting.

Making insulation by 2" glass wool including netting arrangement and covered with aluminium clading as per direction of the EIC. a) 100 mm. dia exhaust pipe.

b) Residential type silenser pipe.

S&F special type MS angle iron structure support made of 35x35x6 mm. MS angle with flat iron clamp with nuts, bolts & washers etc. for 100 mm. dia (Vertical and Horizontal Run)

S&F rain protection canopy.

S& delivery of 50 ltrs. Capacity heavy gauge MS sheet barrel.

Supply & delivery of best quality oil motor pump set with 1" dia PVC flexible pipe (12' ft. approx.)

Commissioning & testing of the Diesel Generator Set along with AMF panel with agency's own tools & tackles in presence of EIC including installation of AMF panel on base frame made of MS angle iron structure as per choice of EIC.

Supply of HSD Oil including transportation charge.

Supply of Mobil Oil including transportation charge.

Construction of DG foundation (size : 2800 (L) x 1400 (W) x 1600 (H) in mm) by brick work with basement PCC of 40 mm thickness including net cementing work as per direction of EIC.

SUB-HEAD 2:- CABLE & LAYING Supply of following PVC/XLPE insulated & Sheathed cables for Working Voltage up to 1100 Volts of following sizes [Make- KEI/ Havells / Polycab / As per choice of EIC] i) 4 core 50 sq. mm. multy stranded alluminium conductor Armoured cable.

ii) 4 core 10 sq. mm. multy stranded alluminium conductor Armoured cable.

Supplying and fixing compression type gland and finishing those for following XLPE / PVC armoured cable (2/4 / 3.5)Core as per GS. i) 4 Core50 Sq. mm

ii) 4 Core10 Sq. mm

Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required. i) 40 mm dia,

ii) 25 mm dia,

Laying of two cables above 35 sqmm and upto 185 sqmm in an underground trench in single tier formation (horizontal), the trench size : 680 mm x 760 mm average depth, with brick protection on the top of each cable 8 (eight) Nos. bricks per Mtr. and 4 (four) Nos. bricks per Mtr. as separator between the bricks and cables and also trench to be filled up with shifted soil, levelling up and restoring surface duly rammed

Laying of cable from 3/3½ core 35 sqmm to 50 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making holes etc. as necy., mending good damages and painting

SUB-HEAD 3:- Earthing Excavation of soil for installation of Earth Electrode and filling & ramming. For Morrum Soil for 3 set dual earthing.

Earthing with 65 mm dia GI pipe (TATA-Medium)x 3.0 Mts. long and 1 x 19/10 stranded GI (Hot Dip) wire (4 Mts. long), 20 mm dia x 125 mm long galvanized bolt, double nuts, double washers including socketing at both ends of stranded GI (Hot Dip) wire by crimping sockets/ thimbles and S & F 40 mm dia GI pipe (ISI-Medium) protection (3 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level to an average depth of 3.65 Mts

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: By TATA-Medium GI pipe

Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe

Connecting the equipments body to earth busbar including S & F 25 mm x 6 mm galvanised (Hot Dip) MS flat on wall/floor with GI saddles as required and connection to equipments incl. drilling holes, with bolts, nuts, washers etc for 5 set dual earthing.

Supplying & fixing sheet metal (16 SWG) Iron Clad Busbar chambers on angle iron frame on wall, incl. earthing attachment and painting as required – (As per Drawing no. 470 of PWD Specification Book – May 1991) 4 bar 415 V, 63 A (Dimension of Al. bars [85mm long] 4 x 20x5mm; Dimension of Sheet Metal Box 500x150mm)

Supplying and fixing MCB SS enclosure with IP-20/30 protection, powder coated provision for two/four pole MCB, concealed in wall after cutting the wall & mending good the damages to original finish incl. painting, connection & provision for earthing attachment 2 Way

Supplying and fixing 240/415 V 6-32 Amp DP MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection (Make: Legrand)

Dismantling of existing DG set and transportation to suitable site .

N.B: i) Payment will be made after availability of fund from concern Department. ii) Payment will be made as per P.W.D norms.

MOON LIGHT (BID ID -6430916)

AMAZE POWER (BID ID -6424558)