Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.0 LAccepted-Finance LAXMANPARA KALNA DIST BURDWAN PIN 713409 | KALNA | BURDWAN | WEST BENGAL | 713409 | L1 | Accepted-Finance Due to Lowest rate | |
| 2 | L2₹2.0 L+₹3,134.04 (1.58%)Rejected-Finance LAKSHMANPARA KALNA BARDHAMAN WB 713409 | KALNA | BARDHAMAN | WB | 713409 | L2 | Rejected-Finance Due to higher rate | |
| 3 | L3₹2.0 L+₹5,143.04 (2.60%)Rejected-Finance | L3 | Rejected-Finance Due to higher rate | |
| 4 | L4₹2.0 L+₹5,143.04 (2.60%)Rejected-Finance VILL POST UNTIA DIST PURBA BARDHAMAN 713 426 | UNTIA | PURBA BARDHAMAN | WEST BENGAL | 713426 | L4 | Rejected-Finance Due to higher rate | |
| 5 | Rejected-Technical | - | Rejected-Technical Invalid Credential |
Tender Value
₹2.0 L
EMD Value
₹4,018
Closing Date
1 Sept 2026, 2:00 pmClosed
Assistant Engineer, Kalna Sub-Division, PWD
O/O Assistant Engineer, Kalna Sub-Division, PWD Madhuban, Kalna, PIN-713409
B.C.S.U. under Kalna SDH under Kalna Sub-Division, P.W.D of Burdwan Division, in the district of Purba Bardhaman. During Year2025-26
2026_WBPWD_5019396_2
WBPWD/AE/KAL/NIeT-03/2026-27
Open Tender
CIVIL WORKS
Percentage
Kalna Sub Divisional Hospital
Please refer Tender documents.
5 documents required · 5 mandatory
₹4,018
Yes
Office of the Assistant Engineer, Kalna Sub-Divisi
3 Sept 2026
20 Aug 2026
3 Sept 2026
24 Aug 2026
1 Sept 2026
24 Aug 2026
27 Aug 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Stripping off worn out plaster and raking out joints of walls,celings etc.upto any height and in any floor including removing rubbish within a
lead of 75m as directed | - | Sqm | 19 | - |
| 2 | Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable
materials at site and removing rubbish as directed within a lead of 75 m.
a) In ground floor including roof. | - | Cum | 447 | - |
| 3 | Dismantling all types of plain cement concrete works, stacking serviceable materials at siteand
removing rubbish as directed within a lead of 75 m.
In ground floor including roof.
(a) upto 150 mm. thick | - | Cum | 939 | - |
| 4 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course,
scaffolding/staging where necessary (Ground floor).[Excluding
cost of chipping over concrete surface] ii) With 1:4 cement mortar (c) 10 mm thick plaster | - | Sqm | 133.54 | - |
| 5 | Supplying bubble free float glass of approved make and brand
conforming to IS: 2835-1987. i) 4mm thick coloured / tinted / smoke glass. | - | Sqm | 585 | - |
| 6 | Providing and fixing exterior quality Aluminium Composite Panel (ACP)
wall cladding on existing Al./MS frame work with GI brackets, ACP fixed
on the existing frame work by folding the edges of ACP panel (Engraving
there arsurface of ACPsheet) with CP angles,cleat sand strainless Steel
screws forming groves at the periphery of ACP panel.Such grooves filled
with foamand silicon sealant etc. complete with all materials (but
including the cost of silicon sealant), labour, scaffolding and all other
incidental charges complete in all respect as per specification and
direction of Engineer-in-charge. (Mode of payment is on finished surface
area of ACP)
(a) 3mm thick (0.25mm Al.+2.5mm LDPE +0.25mm Al. PVDF coating) | 1 | Sqm | 1,991 | ₹1,989.01 |
| 7 | Supplying best Indian sheet glasspanes set in putty and fitted andf ixed
with nails and putty complete. (In all floors for internal wall &upto 6
m height for external wall) ii) 4 mm thick | - | Sqm | 536 | - |
| 8 | Supplying, fitting & fixing of Aluminium fixed partion wall of all
aluminium sections viz top, bottom and side member, intermediate
member, glazing clip made of Aluminium Alloy Extrusions conforming to IS: 733-1983 and IS: 1285-1975, annodized conforming to IS:1868
1983, fitted with all other accessories viz. EPDM gusket,cleat, angle
screws etc. including labour charges for fitting and fixing of aluminium
fixed partition wall with glass / panel board all complete as per
architectural drawings and direction of Engineer-in-charge.
(Excluding cost of glass/ panel board,
10-12 Micron thickness Annodizing film.
Natural white a) for unsupported length of vertical member upto1.50m.height of both ends of vertical member restrained but panel with in 0.90 sqm | 1 | Kg | 391 | ₹390.61 |
| 9 | Supplying, fitting & fixing of partly glazed partly panelled or fully glazed
single leaf Aluminium swing door of all aluminium sections viz door
frame ( top and side frame), shutter( top rail, bottom rail, lock rail, door
vertical) , glazing clip made of Aluminium Alloy Extrusions conforming to
IS: 733-1983 and IS: 1285-1975, annodized conforming to IS:1868
1983, fitted with all other accessories viz. EPDM gusket,cleat, angle
screws etc. including labour charges for fitting and fixing of aluminium
door with door spring,/aluminium hinges, glass / Panel board all
complete as per architectural drawings and direction of Engineer-in
charge.
( Excluding cost of glass/ panel board, door spring/ Al hinges, door
closer, door stoper, handle, tower bolt and locking arrangment etc)
10-12 Micron thickness Annodizing film
Natural white (unit wt of to Top & side frame @1.366 kg/m ; top rail @ 1.296 kg/m;
bottom rail @ 1.974 kg/m; lock rail @ 1.590 kg/m; door vertical @ 1.412
kg/m; glazing clip @ 0.167 kg/m. )
[Note : for estimate purpose construction wing may consider weight of
Aluminium door @ 9.0 Kg per Sq.M] | - | Kg | 385 | - |
| 10 | (B)Supplying 125 mm.Dia acrylic handle for aluminium door as per approved make & brand.
(a) Natural Colour | - | Each | 181 | - |
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 3.59 MB
BOQ_5091693.xls
BOQ • 0.35 MB
2911.pdf
Tender Documents • 0.51 MB
Special_Terms_Condition.pdf
Additional Documents • 2.45 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .