WBPWDTE/AE/BESD-I/e-NIQ 04 of 2025-26

Amount

Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (make-Gloster / Havells /Polycab/RR) partly in 20mm size PVC rigid conduit 'FR' (Precision make) [for ceiling portion only] and in 19mm bore, 3mm thick polythene pipe [for horizontal &vertical run embedded in wall], with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board on wall complete with 2 no. “Ph & N” copper bar incl. bakelite/ Perspex top cover 3 mm thick and incl. 175x100x65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish [only PVC Rigid Conduit on ceiling and remaining portion concealed] as per GS Avg run 8 mtr [E-15/5(c)]

On board [E-15/4(a)]

Supplying and fixing double door Vertical TPN MCB Distribution board for MCCB incomer with IP-42/43 protection, on angle iron frame on wall as per GS( Make-Legrand/ Lauritz Knudsen (L&T)/ABB)8 Way (upto 160 A ) as per GS [15 / D- 11 ]

Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall as per GS.( Make - Legrand/ Lauritz Knudsen (L&T)/ABB ) as per GS 6 Way [ 14 / D- 10 ]

Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. 2+12 Way (Make Legrand/ Lauritz Knudsen (L&T)/ABB ) [13/D-9]

Supply of 4/3.5 Core XLPE Insulated & Sheathed Armoured Aluminium Conductor cables for Working Voltage up to 1100 Volts of following sizes [ Make Gloster/ Polycab /RR /Havells ] 2 Core 6 Sq. mm [ NS ]

4Core 25 Sq. mm [ NS ]

4Core 70 Sq. mm [ NS ]

Laying of cable after cutting floor/ pavement/ wall as per GS for the following Sizes. 2.5 to 35 Sq. mm [ 5(i)/ F- 3 ]

35 to 95 Sq. mm [ 5(ii)/ F- 3 ]

Supplying and fixing compression type gland and finishing those for following XLPE / PVC armoured cable (2/4 / 3.5)Core as per GS. 2 Core 6 Sq. mm [7(c)/F4 & 8(b) /F5]

4Core 25 Sq. mm [7(d)/F4 & 8(b) /F5]

4Core 70 Sq. mm [7(d)/F4 & 8(b) /F5 ]

Supplying and fixing 160A ,415V, TPN SFU with sheet steel enclosure on angle iron frame on wall as per GS.( Make - Lauritz Knudsen (L&T)/ABB/Siemens ). [4(a)/D-3]

Supplying and fixing 415V, 63A Changeover switch with Sheet Steel enclosure on angle iron frame on wall with nuts bolts etc as per GS.( Make - Lauritz Knudsen (L&T)/ABB/Siemens ) [2(b)/D-1]

Supplying and fixing 240 V, 40A change over (MCB module) of on din rail of 2 way MCB DBs/ enclosure and necessary connection as per GS(Make-Legrand) [9/D-7,11/D-9]

Cutting Channel of size (40 mm x 40 mm) on masonry wall by Electric operated cutting machine incl. supplying & fixing heavy gauge 19 mm, 3 mm thick Polythene pipe by means of anchoring chemical (Hilti/Sika) and GI 'U' hooks of 8 SWG incl. supplying and drawing 18 SWG GI wire as Fish wire and mending good damages to original finish by using own tools and tackles as per GS. [E-3/6(a)]

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Make:-Gloster/Havells/Polycab/RR) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required as per GS 3 x 22/0.3 (1.5 sqmm) [E-9/1(b)]

2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC [E-9/1(s)]

2 x 56/0.3 (4 sqmm) + 1 x 36/0.3 (2.5 sqmm) ECC [E-9/1(v)]

2x84/0.3 (6 sqmm) + 1x56/0.3 (4 sqmm) as ECC [E-9/1(y)]

Supply & Fixing of 12'' GI sheet (20SWG) metal Cowl with MS flat iron frame & GI wire mesh on wall as per GS. [ 33/D-14 ]

Supply & Fixing 240 V, 3 nos. 6A, & 1 no. 20A plug socket with separate 3 nos. 6 A & 1 no. 20A Piano key type switch with indicator & 16A kit-kat flush type fuse (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 240x200x65 mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required as per GS. [E-7/25]

Supply & Fixing 240 V, 20A, plug socket with separate 20 A Piano key type switch on sheet metal switch board embedded in wall as per GS [ 22 / E-6 ]

Supply & Fixing 240 V,2 nos 2 nos 6A, plug socket with separate 6 A Piano key type switch on sheet metal switch board embedded in wall as per GS. [ 22 / E-6 ]

Fixing only outdoor / street light type fluorescent light fitting complete with all accessories to be fixed/projected from the wall of the building incl. making holes to building, S&F 40 mm dia GI pipe (ISI-Medium) 1.50 mts. average length, with GI socket at one end and thread at the other end & suitable bend to house the fitting & making necy. connections with S&F necy. length of 1.5 sqmm PVC insulated single core stranded annealed copper wire and making connections as required and mending good damages to wall and painting as per GS. [ 19/ C3 ]

Fixing only single/twin fluorescent light fitting in the ceiling fixed with “L” type MS clamp as per GS. [ 17/C-2 ]

Extra for suspension exceeding 25 cm with S&F additional 2 no. 20 mm dia EI conduit as per GS. [16/C-2 ]

Supply & Fixing 240 V, 25 A, Modular type starter (Make-Legrand/Anchor/North West) with 25A Modular switch type DP MCB (CCurve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. as per GS. [17/E-19 ]

Dismantling charges of the old electrical installation work by companys own tools tackles and labourer as and where required as per direction of EIC. [NS]

Supplying and fixing 415 V Four Pole MCCB of Breaking capacity 25kA/35kA in existing Vertical DBs including necessary connection as per GS [ Make - Legrand/ABB/L&T].160 A FP. [10/ D- 8 ]

Supply and delivery of 250 V 6-32A SP MCB (Make Legrand/L&T/ABB. [ 7 / D- 6]

Supply and delivery of 63A TP MCB (Make /Legrand /L&T/ ABB. [ 7 / D- 6]

Supply and delivery of 63A FP MCB Isolator (Make Legrand /L&T/ABB. [ 6 / D- 5 ]

Supply and delivery of 40A DP MCB Isolator (Make Legrand /L&T/ABB. [ 6 / D- 5 ]

Supply & Fixing angular batten holder (Anchor) on 75mm dia PVCround block / round bakelite on wall/ceiling as per GS. [ 22/D-13 ]

Supply & Fixing Socket type fan regulator (Step type)(Brand approved by EIC) on existing sheet metal switch board as per GS. [ 18 (a) / E-6 ]

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc as per GS. [ 21 (a) / C-3 ]

S/F of 12W LED lamp Make Philips/Bajaj/Havells as per direction of EIC. [NS]

S&D of 230V, 70W LED type street light (Make-Philips Model no- BRP032 LED70 CW/WW MR PSU GR Dxor equiv model of Crompton/Wipro/Havells). [NS]

S&D of 230V, 45W LED type street light( Make-Philips Model no- BRP031 LED45 CW/WW MR PSU GR Dxor equiv make of Wipro/Crompton/Havells). [NS]

S&D of LED post top type light (Make-Philips Cat no- BGP200 LED26CW /WW/NW PSU GR CPC SPD or equiv make of Crompton/Havells/Wipro). [NS]

Supply of Exhaust fans complete with all accessories having the following Model / Cat No. ( Make -EPC ) 9"( 225mm ) Speed 920 RPM as per dir of EIC. [NS]

Supply of Exhaust fans complete with all accessories having the following Model / Cat No. ( Make -EPC ) 12"( 300mm ) Speed 920 RPM. [NS]

Supply & Delivery of singleLED light fitting [Make- Signify (Philips)] Cat No- TMC-502-P1xT-LED 22W/equivalent model of CG Fittings - IGP161LT8-16 1xT8 with 01 Nos LED Tube [Make- Signify (Philips)] Cat No- Mas LED Tube 1200mm 18W 865 T8I-2100 lm/Crompton- Cat No- LTB-20-865-(2) or equivalent make and model of Havells. [ NS ]

Supply & Delivery of twin LED light fitting [Make- Signify (Philips)] Cat No- TMC-502-P1xT-LED 22W/equivalent model of CG Fittings - IGP161LT8-16 1xT8 with 01 Nos LED Tube [Make- Signify (Philips)] Cat No- Mas LED Tube 1200mm 18W 865 T8I-2100 lm/Crompton- Cat No- LTB-20-865-(2) or equivalent make and model of HavellsWipro[NS ]

Supply & Delivery of AC 240V 50Hz 48'' sweep (1200 mm) ceiling fan cpmplete with down rod, canopy, fork incl. S&F of P-2 type capacitor as per IS specification & proper Manufacturer certificate of the capacitor and Safety Wire (Supplied at the time of delivered the fans) etc. without regular, (Make- Usha 1200MM STRIKER PWD ISI 1 STAR, Safety wire & S3 Capacitor) Br/ Orient Electric- New Breeze (5Yrs warranty), 1200 mm sweep, 44W; 320rpm; 225 cmm; 3 star ac fan or equivalent model of Crompton Greaves and as per direction of EIC as per direction of EIC as per direction of EIC. [NS]

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes as per GS 4 sqmm. [F-5/9(ii)]

2.5 sqmm. [F-5/9(i)]

6 sqmm. [F-5/9(iii)]

Excavation of soil for installation of Earth Electrode and filling & ramming as per GS For Morum Soil. [1(b)/G-1 ]

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. Long With ISI-Medium GI pipe as per GS. [ 2(a)/G-1]

Connecting the equipments to earth busbar including S & F Solid GI (Hot Dip) wire of size as below as per GS 4SWG. [5(a)(i)/G-2]

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall as per GS. [4(a)/G-2]

MAGNET ELECTRIC WORKS (BID ID -6497875)

ASSOCIATE (BID ID -6502749)