Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹39.1 LAccepted-AOC VILLAGE CHANNI POST OFFICE SATTANI DISTT UDHAMPUR UDHAMPUR UDHAMPUR JAMMU KASHMIR 182101 | UDHAMPUR | JAMMU AND KASHMIR | 182101 | L1 | Accepted-AOC Being lowest bidder after deducting the sch of credit of Rs. 69256.50 | |
| 2 | L2₹40.6 L+₹1.5 L (3.90%)Rejected-Finance | L2 | Rejected-Finance 2nd Being lowest bidder after deducting sch of credit amt to Rs. 69256.50/- | |
| 3 | L3₹40.9 L+₹1.8 L (4.57%)Rejected-Finance | L3 | Rejected-Finance 3rd Being lowest bidder after deducting sch of credit amt to Rs. 69256.50/- | |
| 4 | L4₹42.0 L+₹2.9 L (7.53%)Rejected-Finance WARD NO 1 HOUSE NO 04 SUBASH NAGAR UDHAMPUR 182101 J K | UDHAMPUR | UDHAMPUR | JAMMU AND KASHMIR | 182101 | L4 | Rejected-Finance 4th Being lowest bidder after deducting sch of credit amt to Rs. 69256.50/- | |
| 5 | L5₹42.6 L+₹3.5 L (8.97%)Rejected-Finance 15 BOH ROAD DEFENCE ENCLAVE AMBALA CANTT 133001 HR | AMBALA | HARYANA | 133001 | L5 | Rejected-Finance 5TH Being lowest bidder after deducting sch of credit amt to Rs. 69256.50/- |
Tender Value
₹43.4 L
EMD Value
₹87,000
Closing Date
15 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (ARMY) DHAR ROAD
GE (ARMY) DHAR ROAD
SPL REPAIR OF BLDG NO NP 46 UNDER GE (ARMY) DHAR ROAD
2023_MES_596300_1
8069/NIT-03/2023-24
Open Tender
Civil Works
Item Rate
240 days
GE (ARMY) DHAR ROAD
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
Yes
GE (ARMY) DHAR ROAD
₹87,000
Yes
4 Sept 2023
18 May 2023
17 Jun 2023
19 May 2023
15 Jun 2023
2 Jun 2023
Amount
Demolition of Brickwork or stone/ boulder masonry, built in CM incl all quoins, arches, pillars, etc, complete all as specified and directed .
M&L for Brickwork with subclass 'B' bricks (old size bricks), straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as directed.
-ditto- all as per above here in but except bricks.
M&L for brick work with sub class ‘B’ bricks (old size brick) straight or curved on plan to any radius in half bricks thick walls, built in CM 1:4 complete all as directed.
Taking down cement plaster of any description on concrete surfaces such as soffit of RCC slab, chajjas and brick walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed
M&L for rendering 15 mm thick cement plaster in CM 1:6 on brick Work or concrete surfaces including finished even and smooth without using extra cement complete all as specified and directed.
M&L, Rendering 15mm thick in CM 1:4 on of brick work or concrete surface finish ever and smooth (w/o using extra cement) incl WPC as per manufacturer instructions at any height etc complete all as specified and directed. (WPC will be measured and paid separately).
Supply only liquid WPC
M&L for rendering 10 mm thick in CM 1:3 over concrete surface as on ceiling, chhajja, shelves etc to match with existing surfaces finish even and smooth w/o using extra cement complete all as specified and directed. .
M & L for applying two coats of distemper oil emulsion on wall over one coat of primer over new plasterd surfaces and obtain smooth finish complete all as directed.
M&L for applying two coats of exterior emulsion/weather coat paint over a coat of acrylic primer incl preparation of new plastered or unplastered surfaces of wall etc complete all as specified.
M & L for applying two coats of distemper oil emulsion on Ceiling over one coat of primer over new plasterd surfaces and obtain smooth finish complete all as directed.
M&L for preparation of old surfaces by removal of existing treatmen and applying two coats of distemper oil emulsion over a coat of primer on surface of walls, complete all as spcified and directed.
M&L for applying 3mm thick wall care putty in two coats and smoothening the surfaces with sand paper/mechanised sanding incl preparation of plastered surfaces of wall complete all as specified and as directed.
M&L for applying two coats of exterior emulsion/weather coat paint over a coat of acrylic primer incl preparation of old surfaces of wall complete all as specified.
Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store yard and rubbish off the premises as directed.
M&L for non skid ceramic coloiured tiles joint free 7 to 8 mm thick (square/rectangular ) area of each tile exc 0.06 Sqm but not exc 0.11 Sqm as in floor of shade & designed as approved by GE,set and jointed in neat cement slurry and pointed with white cement with colour pigment to match the colour of tiles,15 mm thick rendering in bedding layer or screed bed in cement mortar (1:4) in floors etc complete all as specified and directed.
M&L for Glazed rectfied jointless light coloured group ceramic tiles, PEI Grade-0 of size 300x600mm, thickness not less than 6mm as in vertical surfaces such as skirting/dado etc., set and jointed in neat cement slurry and pointed with white cement and pigment to match, laid over and including 10mm thick plastering in cement mortar 1:4, complete all as specified.
M&L for Vetrified ceramic coloured tiles, light shade 10mm thick (square/rectangular) polished, area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match, laid over and including 10mm thick bedding layer in cement mortar 1:4, complete all as specified.
M&L for Vetrified ceramic coloured tiles, light shade 10mm thick (square/rectangular) polished, area of each tile not exceeding 0.36 sqm, as in vertical surfaces such as skirting/dado etc., set and jointed in neat cement slurry and pointed with white cement and pigment to match, laid over and including 10mm thick plastering in cement mortar 1:4, complete all as specified.
M&L for Non - skid Ceramic colour tiles joint free 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry over 15 mm thick screed bed or bedding layer in CM 1:4 over brushing neat cement slurry @ 3Kg/sqm etc complete all as speciefied and directed.
-ditto- all as per above here in before but except in dado , skirting etc. set and jointed in neat cement slurry over 10 mm thick rendering in CM 1:4 complete all as speciefied and directed.
M&L for 18-20mm thick Granite (Zed-Black) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like over 15mm thick in cement mortar (1:4) bedding including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, with and including providing nosing to edges of slab and drilling of hole for gas pipe using mechanical method, complete all as specified & directed. Note: Granite stone slab shall be in single piece to fit.
M&L for marble 18-20 mm (green/any colour shade approved by EIC) thick over cement screed bed laid on 15 mm thick CM 1:6 and jointed with grey cement slurry mixed with pigment ot match the shade to flooring / Window cills / steps,riser incl rubbing and polishing incl rounding to edge of marble and incl dismantling complete all as specified and directed.
Taking down chowkahts or frames with shutters (without taking off shutters from the frame) not exc 1.5 Sqm each and all as specified and directed.
Taking down chowkahts or frames with shutters (without taking off shutters from the frame) exceeding 1.5 Sqm but not exceeding 4 sqm each and all as specified and directed.
M&L for factory made, 2nd class H.W, 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass / gauge etc. (without sash bars) edges or framing plain, chamfered or rounded fitted with cut or mitered beads for securing glass etc. size of members of shutters as specified in SSR Part - I section clause 8.24 (a) suppiled and fitted to chowkats, complete all as specified and directed by Engr-in-Charge
S&F for 30mm thick flush shutters, solid core construction, with particle board core and plywood face panels, prelaminated on both sides with decorative face veneer with lipping/frame to match complete all as specified and directed.
M&L for factory made solid PVC moulded door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with mild steel square tube, supplying and fixing in opening as per specification & drawing and all as directed by the Engr- in-Charge.
S&F for Factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face & fixing in frame at site as per specification & drawingand as directed by Engr-in-Charge.
S&F for Door eye viewer, viewing angle 180 degree, mounting diameter 14mm, total size 4 x 2.5cm (LxD) with good quality glass eye lens, brass chromium plated fixed in position for door shutters, complete allas specified and directed.
S&F for door seal brush (Aluminium plate with nylon brush) of required length for any size of doors, fixed with stainless steel screw, complete all as specified and directed. Make : Harrison or equivalent.
M&L for Kitchen cabinet/cup board shutter/Partation/Shelves etc in required size at site made out of 18mm thick MDF board one side decorative lamination PVC sheet complete all required etc. The panels shall be fabricated using adhesive and secure as required. All edges shall be covered with 2mm thick edge bonding taps or 90⁰ edge bent finish as per manufacturers instructions complete all as spd and directed.
S&F for 25 mm dia decorative/fancy type stainless steel curtain rod with brackets and knobs at both ends as per site requirement incl taking down old existing pipes with accessories complete all as specified and directed. Note: the cost of brackets and knobs is deemed to be incl in the quoted rate.
M&L for pressed steel frames of size 105mmx60mm for doors with one or more rebates fabricated out of 1.25mm thick mild steel sheets including necessary fixing lugs, butt hinges (100mm medium weight-03 Nos), lock strike plate with and including filling of hollow portion in PCC 1:3:6 type C1 using 20mm graded crushed stone aggregate and making good the existing surface in cement mortar 1:6, complete all as specified.
M&L for pressed steel frames of size 125mmx60mm for doors with one or more rebates fabricated out of 1.25mm thick mild steel sheets with and including necessary fixing lugs, hinges (100mm medium weight-03 Nos on each rebate), lock strike plate with and including filling of hollow portion in PCC 1:3:6 type C1 using 20mm graded crushed stone aggregate and making good the existing surface in cement mortar 1:6, complete all as specified.
M&L for pressed steel frames of size 75mmx60mm for cupboard frames with one or more rebates fabricated out of 1.25mm thick mild steel sheets with and including necessary fixing lugs, continuous (Piano) hinges mild steel bright finished or electrogalvanised width of flaps (when open) 30mm and fixed with chowkhat by rebated and welded, lock strike plate with and including filling of hollow portion in PCC 1:3:6 type C1 using 20mm graded crushed stone aggregate and making good the existing surface in cement mortar 1:6, complete all as specified.
M&L for Powder coated Aluminium windows/vents complete all as specified in particular specification and as shown on drawings for various sizes and pattern with following powder coated aluminium sections :-Notes :-A. The rates quoted for powder coated aluminium sections shall be deemed to include the fwg :-(i) Rubber gasket for fixing glass to window/vent shutters.(ii) Fixing of window with and including min 75x10 GI screws all around @ 300 c/c (Min 2 Nos on one side) with PVC RAWL PLUGS/Sleeves.(iii) Rollers, concealed lock cum handle & othe fittings for sliding shutters shall be provided as per manufactures instructions and approved by GE.(iv) Silicone sealant shall be applied on internal as well as external periphery of window and masonry joint to avoid water seepage.(v) All other sundries all as per manufacturer instructions and as directed. B. The rates quoted for powder coated sections shall exclude the cost following and shall be paid seerately under respective items of Sch 'A'/BOQ:-(i) Glass and wire mesh (ii) 40x40x3 aluminium angle provided on all corners of the windows. (c) Aluminum -U-channel shall be provided for fixing of wire mesh. (d) Powder coated aluminum handles and hinges for fixing of openable shutters C. OTHER (i) No allownace for wastage/overlaps shall be considered for payment. (ii) Range of dimension of opening size has been mentioned. the same shall be fixed as pe measurements of opening of windows as per site requirement by the GE/EIC during execution of work.(iii) Powder coated aluminuim section shall be provided all as shown on drawings ans as directed
M&L for THREE TRACK powder coated aluminium section as in window/vents frame for sliding shutters.
M&L for Powder coated aluminium sections as in window/vents frame
M&L for Powder coated aluminium sections as in sliding window shutters.
M&L for powder coated aluminium sections as in openable window shutter.
M&L for Powder coated aluminium tower bolts 75mm long and fixed.
M&L for powder coated aluminium butt higes 75mm and fixed.
M&L for Powder coated aluminium handle 75mm and fixed
M&L for Powder coated aluminium plate type II gate and shutter, hook and eyes 100mm and fixed
M&L for 4.8 mm thick glass ordinary quality, glazing or black with aluminum beeding and gasket to aluminum framework in square exc 0.50 sqm in each pane complete all as specified.
M&L for 4.8mm thick frosted glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane in repair complete all as specified.
S & F for stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples or wooden beads complete all as specified and directed.
S & F for 30 mm Continuous (piano) hinges, mild steel, bright finish or elec trogalvanised complete all as specified and directed.
S&F for Magnetic catcher suitable for kitchen cabinet shutters, complete all as specified.
S&F for 100 mm Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.
S&F for aluminum anodized barrel tower bolts of extruded section 150mm long (ISI Marked) complete all as specified and directed.
S&F for aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, 300mm long, complete all as specified and directed.
S&F for aluminum handles cast type anodized 150mm long (ISI Marked) complete all as specified and directed.
M&L for two coats of synthetic enamel paint over a coat of pink primer on wooden new surfaces of any description over 10cm width or girth incl preparation of new surfaces complete all as specified and directed.
M & L for two coat of synthetic enamel paint over one coat of red oxide, zinc chromiume on steel surface including preparation of new steel surface width or girth exc 10cm all as specified and directed.
M & L for one coat of synthetic enamel paint on steel surface including preparation of old steel surface width or girth exc 10cm all as specified and directed.
S&F for Stainless steel plate rack of size 750mm x 900mm x250mm as per sample kept in GE’s office of minimum thickness of strip not less than 0.50mm, fixed in repairs, complete all as directed.
S&F for Sink made of stainless steel sheet not less than 0.80mm thick for kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever cast iron bracket, connecting union etc. and overall size 495x420mm with bowl size 410x330x160mm with and including stainless steel heavy duty waste coupling and PVC waste collapsible pipe, fixed in repairs, complete all as specified & directed.
S&F for Sink mixer with regular spout wall mounted with connecting legs and wall flanges and including all necessar fitting, complete all as specified. Make: Jaquar Cat Part No. CON 319KN or equivalent in Make.
S&F for Soap tray brass chromium plated and fixed to plugs on wall with brass screws, complete all as specified. Make: Jaquar Cat Part No. ACN 1131N or equivalent in Make.
S&F for Wall mixer with provision for overhead showes with 115mm long bend pipe on upper side, connecting legs and wall flanges, complete all as specified and directed. Make: Jaquar Cat Part No. CON 273KNUPR or equivalent in Make.
S&F for Towel rail brass chromium plated, 20mm dia, D type, 60cm long between flanges, complete all as specified. Make: Jaquar Cat Part No.ACN 1111SM or equivalent in Make.
S&F for Towel ring brass chromium plated, fixed with brass screws and plugs, complete all as specified. Make: Jaquar Cat Part No. ACN 1121N or equivalent in Make.
S&F for Corner glass shelf 200mm (brass brackets), fixed with brass screws and plugs, complete all as specified. Make: Jaquar Cat Part No. ACN 1173 or equivalent in Make.
S&F for Brass chromium plated shower rose of 200mm size with arm and with or without swivel joints, complete all as specified. Make: Jaquar Cat Part No. OHS 1779 for shower and SHA 49483 for arm or equivalent in Make.
S&F for Angle valve with wall flange, 15mm bore, fancy type, chromium plated with long shank and cup, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, both ends screwed for iron pipe or for union etc., fixed in repair, complete all as specified. Make: Jaquar Cat Part No. CON-059KN or equivalent in Make.
S&F for PVC connections 15mm size with Brass nuts of length 600mm, fixed in repairs, complete all as specified. Make: Prayag Cat Part No. BCT-04 or equivalent in Make.
S&F for Vitreous China, wash hand basin, Thin Rim Table top white matt, of size 420x420x150mm including brass CP waste coupling 32mm dia with long screwed shank and fly nuts,32mm dia, chain and plug, porcelain stopper with and including PVC collapsible waste pipe of suitable length, fixed in repairs, complete all as specified. Make: Jaquar Cat Part No. JDS-WHM-25911 or equivalent in Make .
S&F for Chrromium plated brass Centre hole mixer without pop up waste system 15mm bore for mixing hot and cold water screwed down for iron pipe for WHB, complete all as specified. Make: Jaquar Cat Part No. CON-167KNV or equivalent in Make.
S&F for One piece closet with bowl for cupled WC with PP soft seat cover, hinges fixing accessories and accessories set of size 360x680x765mm, strap 220mm cistern with cistern fittings and necessary fixing fittings complete, fixed in repairs, complete all as specified. Make: Jaquar Cat Part No. CNS-WHT-755SS or equivalent in Make.
S&F for Peg set of six, stainless steel of suitable length, complete all as specified. Make: Prayag Cat Part No. BEA 30 or equivalent in Make.
S&F for Toilet paper holder,stainless steel, fixed with and including chromium plated brass screws and and wooden/plastic cleats on walls, complete all as specified. Make: Jaquar Cat Part No. AKP 35753PS or equivalent in Make.
S&F for Health faucet brass chromium plated with 8mm dia 1.2 mtr long flexible pipe and wall hook fixed with brass chromium plated screws, complete all as specified. Make: Jaquar Cat Part No. ALD CHR-573 or equivalent in Make.
S&F for Vitreous China wash down water closet pan (pedestal pattern) with trap, white (excluding fixing bolts, flushing cistern and flush pipe) incl connection to drain and flushing pipe in repairs complete all as spd and directed.
S&F in repair of PVC flushing cistem low level white with all accessories of 10 ltrs capacity incl flushing pipe, brackets and taking down of old CI/PVC flushing cistern complete all as specified.complete all as specified and directed.
S & F in repair Bib tap CP fancy type long body 15 mm bore with will crutch or buttewrfly handle screwed down screwed to iron pipe complete with all fittings all as specified and directed.Make EssEss or Jaquar
S&F for rotational moulded polyetheylene water storage tanks (cylingrical verticlal with closed top) of 1000 ltr capacity, hoisted and fixed repair in any position incl 20 mm dia float valve with aluminium fitting, GI nipple , socket or any other fittings as reqd to fixing the tank & incl dismantling existing water tank complete all as specified and directed.
'Ditto all as per ser item No above but 500 ltr capacity complete all as spd and directed.
S&F for 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. .
Taking up or down 15 mm dia bore steel tubing and connection complete all as specified and directed.
S&F for GI tubing 15mm bore medium grde with all fittings and fixed complete to wall and ceiling or laid in floors etc incl cutting chases in brick wall pinning in making good in CM 1:3 to facings where required, incl 10cm exc but not exc 20cm in girth all as directed and specified.
S&F GI tubing 15 mm bore medium grade medium grde with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.
Fixing only in repair steel tubing and connection 15 mm dia bore to wall and laid in floors complete all as specified and directed.
Taking up or down 20 mm dia bore steel tubing and connection complete all as specified and directed..
S&F GI tubing 20 mm bore medium grade medium grde with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.
Fixing only in repair steel tubing and connection 20 mm dia bore to wall and laid in floors complete all as specified and directed.
Taking up or down 25 mm dia bore steel tubing and connection complete all as specified and directed..
S&F GI tubing 25 mm bore medium grade medium grde with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.
Fixing only in repair steel tubing and connection 25 mm dia bore to wall and laid in floors complete all as specified and directed.
S&F for 110mm bore PVC pipes single socketed Pressure rating @4Kg/Sq cm length "medium grade " with rubber ring joint, fixed to walls with dash ture nut and MS ring (25x6 FI used) bolt at every 1.5 mtrs length complete , incl taking up/down old pipe with all fittings all as specified and directed by Engineer-in-charge.
All as per ser item No above but laid in trench or in floor
S&F for 110mm bore PVC bends/junction any radius complete all as specified and directed. .
S&F for 110mm bore PVC bends/junction with access door any radius complete all as specified and directed. .
S&F for 110mm bore PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed. .
S&F for 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed. .
S&F for 75mm dia PVC (SWR) multi floor trap, plain with grating including jointing with solvent cement complete all as specified and directed. .
S&F for 75 mm bore PVC pipes single socketed Pressure rating @4Kg/Sq cm length "medium grade " with rubber ring joint, fixed to walls with dash ture nut and bolt at every 2 mtrs length complete , incl taking up/down old pipe with all fittings all as specified and directed by Engineer-in-charge.
'Ditto all as per ser item No above but laid in trench or in floor
S&F for 75 mm bore PVC bends/junction any radius complete all as specified and directed. .
M&L for taking down existing roof treatment of any description and any type and position and removing the deberis from site outside MD land all as specified and directed by Engr-in-Charge
M&L for rendering 15mm thick in CM 1:4 on of brick work or concrete surface incl Brushing neat cement slurry with 3.0kg of cement per sq. metre finish ever and smooth (w/o using extra cement) incl WPC as per user manual at any height etc complete all as specified and directed. (WPC will be measured and paid separately).
M&L for Roof treatment for Non Accessible Roof :- priming the roof surface with bituminous primer conforming to IS-3384 @ 0.30 ltrs/Sqm and applying a coat of hot blown 85/25 grade bitumen conforming to IS-702 @ 1.20 Kg/Sqm and thereafter provide polymeric water proofing membrane (five layered) of weight not less than 3 Kg/Sqm with centre layer core of 90 micron high molecular density polyethylene film followed by another coat of semi hot blown 85/25 grade bitumen @ 1.20 Kg/Sqm blinded with fine sand in dry condition @ 0.50 Kg/Sqm, Top surface of roof after carrying out treatment as specified here in above as per manufactur instructions, complete all as specified
M&L for Chicken wire mesh of size 12.5 mm and wire dia 0.51 mm (24 SWG) hexagonal construction, stretched firmly for roof treatment, complete all as specified.
M&L for 40mm thick Cement concrete type B-1, 1:2:4 (20mm graded aggregate) for roof pedding, finish even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge
M&L for Roof tretment for accessible roof :- priming the roof surface with bituminous primer conforming to IS-3384 @ 0.30 ltrs/Sqm and applying a coat of hot blown 85/25 grade bitumen conforming to IS-702 @ 1.20 Kg/Sqm and thereafter provide polymeric water proofing membrane (five layered) of weight not less than 3 Kg/Sqm with centre layer core of 90 micron high molecular density polyethylene film followed by another coat of semi hot blown 85/25 grade bitumen @ 1.20 Kg/Sqm blinded with fine sand in dry condition @ 0.50 Kg/Sqm,complte all as specified
Taking down old PCC tiles from roof and removing bedding at any position and removing the deberis outside the MD land, complete all as specified and as directed.
M&L for Cement concrete tiles, coloured, machine pressed, factory made of size 30cmx30cm, 20mm thick, with grey cement and pigment, set, jointed and pointed in neat cement slurry, laid over and including 15mm thick screed layer in CM 1:4 over roofs, complete all as specified.
M&L for making benching with PCC (1:2:4) type B0 using WPC along side wall adjoining to roof in concave shape complete all as specified.
S& F for False ceiling with Gypsum based ceiling tiles and frame work (with aluminium foil on one side) of size 595mm x 595mm of thickness not less than 9mm including with GI powder coated frame angle/tee grid frame work for ceiling with following specifications & incl disamntling ceiling board any type etc :-(a) Bottom Tee- 25mm x 25mm, 1.0mm thickness (b) Cross Tee- 25mm x 25mm, 1.0mm thickness .(c) Wall angle- 25mm x 25mm, 1.00mm thickness (d) 1.imm dia GI wire suspenders alonwith adjustable clamps to maintain levelling in cluding fixing to ceiling fasteners as per manufacturers instructions.(e) Rest all as directed by the GE Make: Vinyl TOUCH of LaGyp or equivalent in Make as per Appx `E' to Particular specification.
Dismantling of plain, corrugated or semi corrugated sheeting, of any description, roof coverings all as specified.
S&F for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified and complete all as directed and specified.
S&F painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,eaves etc fixed with self tapping screws as specified complete all as specified as directed.
S & F for rolled sections as in main and cross beams, hip and jack rafters,truss, purlins where connected to common rafters and running rails, cleat or other connecting plates cutting, welding including Nut Bolts, Fe 410-W(Gde -E-250) quality A all as specified and directed.
M&L for Providing precast cement concrete 1:2:4 type B0 louvres and jallies, 35mm thick (measured solid), including all mouldings but excluding frame set in cement mortar 1:4, complete all as specified and as directed.
M&L for Water proofing treatment to floor & vertical surfaces of sunken portion complete comprising the following: - (a) After demolition of floor & lime concrete etc. remove all loose particles along with existing water proofing treatment (any no. of layers) with wire brushes and cleaning the surfaces with water. (b) Brushing cement slurry with 1.2 kg of cement per square metre duly blended with & including water proofing compound. (c) 15 mm thick (Average thickness) plaster in cement mortar (1:3) mixed with WP compound on sunken surface including walls. The corner of sunken portion shall be rounded in concave shape and adequate slope shall be made during plastering to accommodate sump pipe and curing the sunken portion with water minimum for 48 Hrs by ponding.(d) Applying self adhesive type APP based polymeric membrane minimum weighing not less than 3.6 kg/ Sq. m and minimum 3 mm thick reinforced with polyester non-woven fabric (weight not less than 150 gm/Sq. m),(e) M&L for PCC 1:7 :12 for fillin of sunken portion after conceling all menbrane and sealing all joints to the entire with broken bats and light weight all as satisfaction of Engineer-in-Charge.
S&F for expanded metal, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixed with galvanized steel staples supplied /welding to steel member, weight exc 4 kg per Sqm complete all as specified and directed.
M&L for framed work such as grills, gratings,framed guard bars, walk ways, railings; framework of water tanks, cooler stand ,rafters & purlins etc work conforming to Fe.290.Gde-E-16, complete all as specified and directed.
Mild steel Framed work as in safety doors fabricated out of mild steel hollow sections of sheet thickness not less than 1.6mm thick, MS square bars or other section with, rails, braces, sliding door bolt fabricated out of 16mm Ms round bar, staple etc with and including provn for fixing of wire mesh, complete and fixed to mild steel pressed chowkhats, complete all as specified and as directed.
S&F for Mild steel pressed handles-150mm, oval type, stove enamelled black fixing with ss screws/ welding complete all as specified and directed.
S&F for Mild steel barrel tower bolts -200mm, stove enamelled black, with bright bolt and fixed with ss screws/ welding complete all as specified and directed.
S&F for Mild steel sliding door bolts-250mm, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed with ss screws/ welding complete all as specified and directed.
S&F for MS butt hinges, medium weight, cold rolled mild steel 100mm long (ISI Marked) with welded or complete all as specified and directed.
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for, as directed by the Engr-in-charge.
M&L for RCC Nominal mix type B1 1:2:4 (20mm graded aggregate) in landings, chajjas,shelves and similar articles with plain faces, set in cement mortar 1:4 complete all as specified and directed.
M & L broken stone hard core of gauge n.exc. 63mm, deposited, spread and leveled in layers n.exc. 15 cm thick, watered and rammed to a true surface all as specified and directed.
M&L for PCC (1:3:6) type C2 using 20 mm graded aggr as in surface channels/drains /mass concrete etc incl demoliton complete all as directed and specified.
M&L brick work with sub class 'B' bricks, straight or curgved in cm 1:4 straight or cuved on plan to exc 6m mean radius complete all as directed and specified.
M&L rendering 15mm thick in CM (1:4) on brick work or concrete surfaces smooth & even without using extra cement complete all as directed and specified.
M&L for PCC 1:2:4 type B0 (using 12.5 mm graded stone aggregate) as in coping/benching and all other similar works including necessary formwork complete all as directed.
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, mounds, mitred/stopped end etc.
M&L for RCC 1;2;4 (using 20mm graded agg) pre-cast cover slabs, shelves and similar articles complete all as directed and specified.
M&L for TMT Bar 10mm dia and over cut to length bend to shape required incl cranking, bending sprilly for hooping colmns hooking ends and binding with and incl MS wire (Anneled) not less than 0.9mm dia or securing with clips
Demolition of cement concrete unreinforced in ground floors and paving n. exc 15 cm thickness below or above gound level , concrete debris and rubbish to a distance n exc 100m as directed by the EIC.
M&L 75mm thick PCC type D-2, 1:4:8 (using 40mm graded aggregate) as in sub base all as specified and directed.
M & L for 50 mm thick PCC 1:3:6 type C-2 (using 40 mm agg. ) as in plinth protection / path/ any paved area complete all as specified and directed.
M&L for 25 mm thick PCC type B-0, 1:2:4 (using 12.5 mm graded stone aggregate) as in laying of floor finishes and finishing smooth and even without using extra cement all as specified and directed.
M&L for machine pressed precast concrete interlocking paver block of 60mm thickness, any shape and size confirming to IS 15658 -2006 with grey cement, pigment complete all as specified and directed.
M & L for sand filling under floors or in foundation or as in sand coushing incl watering and consolidation complete all as specified.
M&L for Factory made Pre-cast cement concrete block type B1, 1:2:4 as in kerb stone made to shape as directed, exc. 10 cm in width and setting in mortar 1:4, complete all as specified and as directed.
Excavating in trenchs n exc 1.5m in depth and n exc 1.5m wide for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan and n exc 1.5m in depth and getting out soft/loose soil complete all as specified & as directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified & as directed.
Removing excavated soil material to a distance n exc 50 m and deposited where directed at a level n exc 1.5 m above the starting point complete all as specified & as directed.
S&F for laying in trenches, jointing and testing salt glazed stoneware pipe grade 'A' drainpipe 150mm bore conforming to IS at any depth after they are laid and tested complete all as specified & directed.
M&L for PCC 1:3:6 type C2 as in concrete bed to 150 mm bore drain pipe and over incl packing under haunching against the sides of pipes after pipe laid and tested complete all as specified & as directed.
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.
Material and labour for Point wiring complete (for simple and modular type ) with 1.5 sqmm single core PVC insulated heavy duty ISI Marked,FRLS unsheathed cable 1100 volts grade with multistranded copper conductor drawn through and including PVC white non metalic PVC conduit medium grade not less than 20mm dia with all accessories like tee, straight joint, L Bend etc.,concealed on walls, sufrace on ceiling/ floors etc., and including provision of PVC heavy duty Insulated FRLS copper conductor, 1.5 sqmm for earth continuity conductor and connected to common earth dolly complete all as spd and directed. Note :- cover plate with frame and box will will measured and paid separately.
One light / Exhaust Fan/Ceiling fan & One Bell/buzzer point controlled by one switch.
One switch socket outlet point 3 pin 5 Amps on Independent board.
One light point controlled by two 2-way switches, with cables 1.5 sq. mm size
Material and labour for Point wiring complete (for simple and modular type ) with 2.5 sqmm single core PVC insulated heavy duty ISI Marked,FRLS unsheathed cable 1100 volts grade with multistranded copper conductor drawn through and including PVC white non metalic PVC conduit Medium grade not less than 20mm dia with all accessories like tee, straight joint, L Bend etc.,concealed on walls, sufrace on ceiling/ floors etc., and including provision of PVC heavy duty Insulated FRLS copper conductor, 1.5 sqmm for earth continuity conductor and connected to common earth dolly complete all as spd and directed. Note :- cover plate with frame and box will will measured and paid separately.
Material and labour as in repair for sub main wiring with two single core PVC insulated unsheathed copper conductor cable 10 sqmm drawing in and including rigid non metalic PVC heavy duty 25 mm dia conduit concealed on wall/surface on ceiling with one additional PVC wire of copper conductor of 10 sqmm for earth continuity conductor incl taking down old Unsv submain any type and size and making good the disturbed surface complete all as specified and directed by EIC.
S&F as in repair Angle lamp holder fixed on wall /ceiling all as approved and directed by Engineer-in-charge.
S&F as in repair Bulk Head fittings on wall all as approved and directed by Engineer-in-charge.
Supply and fixing LED 9 Watt lamp , 240 Volt, 50 Hz lamp
Supply and Fixing LED 20 Watt light fitting Baton integrated LED channel, integral sleek extruded polycarbonate LED Channel with white acrylic cover and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete with all accessories incl taking down complete all as specified and directed by Engr-in-Charge.
Supply and fixing of building security LED fitting upto 40 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 66 protection incl taking down complete all as directed by EIC
S&F 1.5m long 40mm bore light grade GI pipe bracket duly cut to size and bent to shape required duly painted with 2 coats of aluminium paint (of approved tint) over a coat of red oxide primer, including suitable 2 Nos. Clamps as required to fix on concrete / steel poles incl taking old unsve GI bracket any type and size complete all as specified and as directed
Taking down carefully existing ceiling fan any type and size , removing its fan blade and deposited in MES store for safe custody all as directed by Engr-in-Charge
Taking down carefully existing Exhaust fan any type and size and deposited in MES store for safe custody all as directed by Engr-in-Charge
Taking down carefully existing Electric Water Heater (Geyser) any type and size and deposited in MES store for safe custody all as directed by Engr-in-Charge
Taking down carefully old Energy meter any type and any capacity and deposited to MES E/M store yard compete all as directed by Engr-in-Charge.
Refixing of existing serviceable ceiling fan any size from MES Store Yard along with new connection wire 3 core duly refixing the blade along with new MS clamp properly all as directed
Refixing of existing serviceable Exhaust fan any size from MES store yard including fixing with fastnuts and provisioning of three core flexible copper cord of required length from ceiling rose or connectror to Exhaust fan for connection, complete all as directed by Engr-in-charge.
Refixing of Energy Meter any type and size (meter to be collected from MES store yard) and making connection, complete all as spd and directed by Engr-in-Charge.
S&F Ceiling Fan AC single phase 230 volts for size 1200 mm sweep, including fixing arrangement including nut, bolts, washer etc, with necessary eletric connection with suitable copper wire from ceiling rose complete all as spd and directed. inluding removing and dismentaling of old UNSV fan any type and size and and given as sch of credit to contractor
Material and labour for making hole in the existing brick wall without damaging the structure suitable for accommodating 300 mm Ex fan and make good the disturbed suface by cement/mortar complete all as spd and directed by Engr-in-Charge.
Supply and fixing of new Exhaust fan AC single phase 230 volts for size 300 mm sweep, including making hole and fixing arrangement including nut, bolts, washer etc, making good the disturbed surfaces matched with existing finishes comprising with necessary eletric connection with suitable copper wire from ceiling rose complete.
Supply and fixing Ceiling fan AC single phase 230 volts for size 1200 mm sweep, including fixing arrangement such as nut, bolts, washer etc, making good the disturbed surfaces matched with existing finishes comprising with necessary eletric connection with suitable copper wire from ceiling rose complete all as spd incl taking down old ceiling fan any size 1200/1400 mm any type complete.
S/F Call Bell AC 230 V Single Pole along with necessary electric connection all as spd and directed.
S & F ceiling rose Ceiling rose, PVC/polycarbonate, isolated body all as specified and directed.
Supply and fix Modular switch 1 way 6A,1 module
Supply and fix Modular switch 1 way 16A,1 module
Supply and fix Modular switch 2 way 6A, 1 module
Supply and fix Modular Bell push 6A 1 module
Supply and fix Modular Socket, 6A - 2/3 pin combined 2 module
Supply and fix Modular Socket 6A/16A - 2/3 pin combined 2 module,
Supply and fix Modular Fan step regulator, 120W - 2 module
supply and fix white cover plate with frame, 1 module
supply and fix white cover plate with frame, 2 module
supply and fix white cover plate with frame, 3 module
supply and fix white cover plate with frame, 4 module
supply and fix white cover plate with frame, 6 module
supply and fix white cover plate with frame, 8 module
Supply and fix modular Metal flush box 1/2 module
Supply and fix modular Metal flush box 3 module
Supply and fix modular Metal flush box 4 module
Supply and fix modular Metal flush box 6 module
Supply and fix modular Metal flush box 8 module
Supply and fixing as in repair Metal clad socket outlet with single pole and nuetral enclosure with two pin and earth plug socket complete with one single pole MCB 20 Amps complete all as specified and directed by EIC.
Supply & Fixing in replacement of DB by TPN Distribution Box 6 way vertical, double door of protection grade IP 43 provn for 4 Pole MCCB frame upto 200 Amps , upto 50 KA breaking capacity as incomer in fine powder coated, matt finish with best CRCA sheet, fitted with shrouded neutral, insulated pin type copper bus bar, Din rail, earth bar of way, confirming to IS 13032 & 8623 including chasing/cutting of wall and concealed and making good as existing surface complete all as specified and directed.
supply and fixing of MCCB 125 Amps 16 KA with fixed thermal magnetic release frame 4pole all as specified and directed.
Supply & Fixing TPN DB 4 Way distribution Box, double door of protection grade IP 42 in fine powder coated, matt finish with best CRCA sheet, fitted with shrouded neutral, insulated pin type copper bus bar, Din rail, earth bar complete confirming to IS 13032 & 8623 incl taking down old UNSV TPN DB any type and size complete all as specified and directed.
Supply & Fixing MCB SP, 06 to 32 Amps 240 volts, AC , 10 KA breaking capacity 'B' Series,"ISI marked complete all as specified and directed.
Supply & Fixing MCB TPN DP 63 Amps 440 volts, AC , 10 KA breaking capacity 'B' Series,"ISI marked complete all as specified and directed.
M&L as in repair for earthing as per IS:3043 with galvanized steel earth plate electrode 600 x 600 x 6.0 mm thick buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level connected to galvanized iron wire 4 mm dia (8 SWG) as earthing lead protected by GI pipe light grade 15 mm bore for protection of GI earth wire and 20 mm dia GI pipe medium grade for watering with alternate layers of charcoal /coke and salt including all accessories like nut, bolts, reducer, nipple, wire meshed/screened funnel and making brick masonry finished chamber of internal size 300 mm x 300 mm x 300 mm with concrete base, covered with PCC cover which shall be embedded in the block masonry including excavation works, refilling, connected to main switch/MCB DB for feeding the electric supply to domestic quarters compete all as specified as shown in electricall plateNo. 3 of SSR Part-I and testing of earth resistance as required. Note : Earthing lead/G.I.Earth wire upto 7.5 metre length shall be deemed to be included in quoted unit rate beyond 7.5 metre, the same shall be measured and paid separately). Note - Earth test point, earth pit cover will be measured and paid separately.
Material and labour for earth Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hex. head screw
M & labour for CI plate for earthing pit of 300mm x 300mm complete all as spd and directed by EIC.
Supply and fix LED Mirror wall light fittings 10/9 Watt, 240 Volt, 50 Hz complete all as specified and directed.
supply and fixing of Post top light 20 watt along with bulb and connecting pipe of suitable bore Ref crompton cat part No LPTH-20-WW or equivalent
Supplying ,Laying and testing complete GI tube medium grade 80 mm bore with all fittings laid in trenches complete all as specified and directed.
Supplying ,Laying and testing complete GI tube medium grade 50 mm bore with all fittings laid in trenches complete all as specified and directed.
Supplying ,Laying and testing complete GI tube medium grade 20 mm bore with all fittings laid in trenches complete all as specified and directed.
Supply and Fixing of Gate valve 50 mm bore complete all as specified.
Supply and Fixing of Gate valve 20 mm bore complete all as specified.
Cutting/making hole into CI/DI/MS pipes of 100 mm carefully and insertion of new tee incl clamping with suitable size clamp for taking small branch connection complete all as directed by EIC.
Taking down old unserviceable GI pipe 50/80 mm dia
Taking down old unserviceable GI pipe 20 mm dia
Taking down old unserviceable valve 50/20 mm dia
M&L for dismentling the U/S valve chamber including rusted MS cover complete with out disturming the existing pipe line and Costruction of new valve chamber incl necessary earth work in any type of soil, PCC foundation C-2 (1:3:6) type C2 40mm graded stone aggregate as in base concrete ,brick work in CM 1:6 with 10 mm thick plaster internally and 15 mm thick externally in CM 1:4 , 6 mm thick MS cover with hinges and locking arregement fixed to angle iron frame made out of 40x40x6 mm MS angles complete with 2 coats of synthetic enemal paint over one coat of red oxide primer on all metal works & three coats of white wash on all plastered surfaces of valve chambers size 900mm x 900mm x 900mm complete all as specified & directed by Engr -in- charge.
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 6 sq mm 2 core
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sq mm 3.5 core
Dismentaling of cable XLPE Insulated cable of size upto 35 Sqmm any type and size complete as spd by EIC.
Excavation in trenches in Hard and dense soil n.exc 1.5 m wide and n.exc 1.5 m in depth for foundation of poles,cable laying, water pipelines etc, including forming bottom surface to required level and getting out in soft/loose soil complete all as specified and directed by Engineer-in-Charge.
Returning, filling in soil/loose soil including spreading, leveling,watering & well ramming in layers not .exceeding 25 cm thick complete all as specified and directed by EIC.
Removing of surplus spoil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed by Engineer-in-Charge.
Material and labour for sand cushioning with a layer of sand 80mm thick before laying of cable and 150mm thick after laying of cable to trenches and punning down complete all as specified and directed by Engineer-in-Charge.
Material and labour cover to underground cable with one layer of bricks using sub class 'B' bricks laid flat acorss the cable complete all as specified and directed by Engineer-in-Charge.
Supplying ,Laying and testing complete GI tube medium grade 50 mm bore with all fittings laid in trenches complete all as specified and directed.
Supply and fix new electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc.
Supply and fix New Wall mounted fan 400 mm, 240 Volt, 50 Hz complete all as spd and directed by EIC.
Supply and fix as in repair Rigid non-metallic PVC conduit exclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc of size 20 mm
S.K CONSTRUCTION
M/S SHARMA TRADERS
DAVINDER SINGH
MAHADEV ENTERPRISES
SHIVAE CONSTRUCTION
M/S PAWAN KUMAR ANAND
JINDAL BUILDERS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .