SPECIAL REPAIRS OF CAFETERIA, CENTRAL STORE, RECREATION/MULTIPURPOSE BUILDING (BUILDING NO P-14) AT NMRL AMBERNATH

Amount

Dismantling tile work in floors and roofs For thickness of tiles 10 mm to 25 mm laid in cement mortar including stacking material within 50 metres lead complete all as specified and directed by Engr-in-Charge.

Dismantling Dado/skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead complete all as specified and directed by Engr-in-Charge.

Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead complete all as specified and directed by Engr-in-Charge.

Providing and laying vitrified floor tiles of size 600 mm x 600 mm and thickness of 9 to 10mm conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc, complete all as specified and directed by Engr-in-Charge.

Providing and laying matt finished vitrified tile of size 300x300x 8 to 9 mm thick conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc, complete all as specified and directed by Engr-in-Charge.

Providing and laying antiskid Ceramic glazed floor tiles of size 300x300 mm thickness 7 to 8 mm of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory , Grey , Fume Red Brown, laid on 20 mm thick cement mortar 1:4 Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc, complete all as specified and directed by Engr-in-Charge.

Providing and laying Glazed Vitrified tiles Matt/Antiskid Size of Tile 600 x 600 mm of thickness 8 to 9mm conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier , wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily, complete all as specified and directed by Engr-in-Charge.

Providing and laying Vitrified tiles of size 600 mm x 600 mm and thickness of 8-9 mm and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc, complete all as specified and directed by Engr-in-Charge.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 size 600 mm x 300 mm and thickness of 7-8 mm , of approved make, and colours, as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete all as specified and directed by Engr-in-Charge.

Providing and fixing 18 mm thick Granite stone slab colour black, Cherry/Ruby red and area of slab over 0.50 sqm gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etccomplete all as specified and directed by Engr-in-Charge.

Providing and fixing of Kota stone slab flooring over 20 mm (average) thick base in CM 1:4 laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete of 25 mm thick, complete all as specified and directed by Engr-in-Charge.

Providig and fixing Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing, complete all as specified and directed by Engr-in-Charge.

Providing and fixing marble (white agaria) stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 using 6 to 12mm graded stone aggregate as per direction of Engineer-in-charge and finished smooth complete all as specified and directed by Engr-in-Charge.

Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish, complete all as specified and directed by Engr-in-Charge.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 type B1 (using 20 mm graded stone aggregate) derived from natural sources complete all as specified and directed.

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below, complete all as specified and directed by Engr-in-Charge.

T aking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead Of area 3 sq. metres and below, complete all as specified and directed by Engr-in-Charge.

Providing and fixing PVC Door Frame of size 50x47 mm with a wall thickness of 5 mm (± 0.2 mm), made out of single piece extruded PVC profile, with mitred cut joints and joint with 2 nos of PVC bracket of size 190 mm x 100 mm long arms of cross section size 35 x 15 mm & self driven self taping screws, the vertical door profiles to be reinforced with 40x20 mm M.S. rectangular tube of 0.8 mm , including providing EPDM rubber gasket weather seal throughout the frame, including jointing 5 mm PVC frame strip with PVC solvent cement on the back of the profile. The door frame to be fixed to the wall using 8 x100 mm long anchor fasteners complete, all as per manufacturer's specification complete all as specified and directed by Engr-in-Charge.

35 mm thick factory made Solid panel PVC Door shutter, made out of single piece extruded soild PVC profiles, 5 mm (± 0.2 mm) thick, having styles & rails (except lock rail) of size 95 mmx 35 mm x 5 mm, out of which 75 mm shall be flat and 20 mm shall be tapered (on both side), having one side thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power, including reinforcing with MS tube of size 40 mm X 20 mm x 1 mm, joints of styles & rails to be mitered cut & joint with the help of PVC solvent cement, self driven self tapping screws & M.S. rectangular pipes bracket of size 190 mm X 100 mm of cross section size 35 mm x 17 mm x 1 mm at each corner. Single piece extruded 5 mm thick solid PVC Lock rail of size 115 mm x 35 mm, out of which 75 mm to be flat and 20 mm to be tapered at both ends, having 15 mm solid core in middle of rail section integrally extruded, fixing the styles & rails with the help of solvent and self driven self tapping screws of 125 mm x 11 mm, including providing 5 mm Single piece solid PVC extruded sheet inserted in the door as panel, all complete as per manufacturer's specification complete all as specified and directed by Engr-in-Charge. Decorative finish (wood grained finish)

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction withframe of 1st class hard wood and well matched teak 3 ply veneeringwith vertical grains or cross bands and face veneers on both faces ofshutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws, complete all as specified and directed by Engr-in-Charge.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron), complete all as specified and directed by Engr-in-Charge.

Providing and fixing aluminium work for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron), complete all as specified and directed by Engr-in-Charge.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm), complete all as specified and directed by Engr-in-Charge.

Providing & fixing fly proof wire gauze to aluminum windows, nuts & bolts complete. Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides, complete all as specified and directed by Engr-in-Charge.

Providing and fixing 100x75x3.50 mm ISI marked, IS : 1341, M.S. butt hinges with necessary screws etc, complete all as specified and directed by Engr-in-Charge.

Providing and fixing 300x16 mm aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc, complete all as specified and directed by Engr-in-Charge.

Providing and fixing 125 mm aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc, complete all as specified and directed by Engr-in-Charge.

Providing and fixing 200x10 mm aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc, complete all as specified and directed by Engr-in-Charge.

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc, complete all as specified and directed by Engr-in-Charge.

Removing existing water proofing treatment of any type all as directed by Engineer-in-charge and disposing off out side MD land complete all as specified and directed by Engr-in-Charge.

Demolishing Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) cement concrete manually/ by mechanical means including disposal of material within 50 metres lead complete all as specified and directed by Engr-in-Charge.

`Providing and laying in position cement concrete with smooth finish of specified grade excluding the cost of centering and shuttering 1:2:4 ( type B1 (using 20 mm graded storne aggregate) on roof slab complete all as specified and directed by Engr-in-Charge.

Supply only liquod water proofing compound complete all as specified and directed by Engr-in-Charge.

M&L for applying water based polyurethane modified dispersion (single component cold applied, non toxic, VOC complaint) in 03 coats including 01 coat of primer of same material after dilution of water at 50% of specific primer matching same material as per manufacturer specification and acomplete all as specified and directed by GE/Engr-in-Charge. Properties of Poly urethane based chemical shall confirm to following Technical Parameters: (i) Highly elastic (ii) UV resistance (iii) Adhesion to concrete >1N/Sqmm (iv) Tensile strength not less than 2 0 N/Sq mm for free film (v) Elongation not less than 300% (vi) Solid content by weight not less than 60% (vii) Air/water permeability BSEN 12390 at 5 bar 72 hours should be NIL and minimum dry film thickness of water proofing membrane must be 1.0 mm (viii) Accelerated weathering (ASTM 453) Pass 1000 hours (ix) Reaction to fire- non inflammable NOTE : 1.To be applied by the Rep of manufacturer’ s authorized applicator mentioned only. Contractor has to provide manufactrurer’s Test certificate for the above mentioned technical parameters. 2. For accessible terrace and inaccessible terrace. 300 mm height of vertical surface / parapet wall to be treated with same specification of slab 3. Make:- Bostik, Berger, Fosroc, Sika, Asian or any other make approved by E-in-C’s Branch for PU based water proofing treatment

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc, complete all as specified and directed by Engr-in-Charge.

Preparation of old plastering surface walls and finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives (Two coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm, complete all as specified and directed by Engr-in-Charge.

Demolishing brick work In cement mortar manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead complete all as specified and directed by Engr-in-Charge.

Brick work with common burnt clay With F.P.S.(non modular) bricks machine moulded perforated bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 complete all as specified and directed by Engr-in-Charge.

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing 1:2:4 ( type B1 (using 20 mm graded storne aggregate) complete all as specified and directed by Engr-in-Charge.

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead, complete all as specified and directed by Engr-in-Charge.

M&L for 15mm thick External wall plaster on brick or concrete surfaces in CM 1:4 shall be provided in two coats viz 10 mm first coat and 5 mm second coat using W.P.C.and finished fair and even all as specified Note:- WPC will measurement separately, complete all as specified and directed by Engr-in-Charge.

M&L for 12 mm thick internal plaster on brick or concrete surfaces in CM 1:6 and finished even & smooth without using extra cement ccomplete all as specified and directed by Engr-in-Charge.

M&L for 6mm thick plater in CM 1:3 on ceiling surfaces complete all as directed.

Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification Two coats on new work, complete all as specified and directed by Engr-in-Charge.

M&L for preparation of newly plastered ceiling and applying three coats of white wash, complete all as specified and directed by Engr-in-Charge.

Removing white or colour wash by scrapping and sand papering andpreparing the surface smooth including necessary repairs and Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth to scratches and apply two coat of Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade, complete all as specified and directed by Engr-in-Charge.

M&L for White washing with lime to give an even shade on Old work (one coats) complete all as specified and directed by Engr-in-Charge.

M&L for Painting with synthetic enamel paint on steel surface of approved brand and manufacture of required colour to give an even shade two coats on new work including a coat of primer complete all as specified and directed by Engr-in-Charge.

M&L for Painting with synthetic enamel paint on steel surface of approved brand and manufacture of required colour to give an even shade One coats on old work complete all as specified and directed by Engr-in-Charge.

M&L for Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture complete all as specified and directed by Engr-in-Charge.

Applying priming coat for new wood work With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) and Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer including Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10sqm of approved brand and manufacture as per manufacturers specifications complete all as specified and directed by Engr-in-Charge.

Providing and fixing 100 mm sand cast Iron grating for gully trap including jointing with solvent cement, including jointing to waste pipe and fixed in cement mortar type B1 1:2:4 complete all as specified and directed by Engr-in-Charge.

Disconnecting damaged overhead/terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level complete all as specified and directed by Engr-in-Charge.

Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI : 12701, colour as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support including fittings & fixtures for tank shall be paid separately complete all as specified and directed by Engr-in-Charge.

Providing and fixing in repair 20 mm nominal bore ball valve (brass) of approved quality, High or low pressure, with plastic floats complete all as specified and directed by Engr-in-Charge.

Providing and fixing in repair gun metal gate valve with C.I. wheel of approved quality (screwed end) of 20mm dia bore and fixed complete all as specified and directed by Engr-in-Charge.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board 510x1040 mm bowl depth 250 mm complete all as specified and directed by Engr-in-Charge.

Providing & fixing in repairs Orissa pattern W.C Pan of size 580x440 mm White vitreous china water closet squatting pan (Indian type) along with "S" or "P" trap including provision of suitable concrete base complete all as specified and directed by Engr-in-Charge.

Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead complete all as specified and directed by Engr-in-Charge.

Providing and fixing P.V.C 10 litre capacity - White low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixturescomplete all as specified and directed by Engr-in-Charge.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P pillar cock, 32 mm C.P waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P pillar cock complete all as specified and directed by Engr-in-Charge.

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete all as specified and directed by Engr-in-Charge.

Providing and fixing 15 mm nominal bore C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931 complete all as specified and directed by Engr-in-Charge.

Providing and fixing 32 mm dia P.V.C. Flexible waste pipe for sink or wash basin including P.V.C. waste fittings complete all as specified and directed by Engr-in-Charge.

Providing and fixing uplasticised PVC connection pipe 45 cm length with brass unions 15 mm nominal bore complete all as specified and directed by Engr-in-Charge.

Providing and fixing C.P. brass 15 mm nominal bore bib cock of approved quality conforming to IS:8931 complete all as specified and directed by Engr-in-Charge.

Providing and fixing white vitreous china flat back type lipped front urinal basin of 430x260x350 mm of size complete all as specified and directed by Engr-in-Charge.

Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100 mm with 1/2" BSP thread and shapes, weighing not less than 60 gms complete all as specified and directed by Engr-in-Charge.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms complete all as specified and directed by Engr-in-Charge.

Providing and fixing Single socketed pipes 75 mm diameter on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring leaving 10 mm gap for thermal expansion, complete all as specified and directed by Engr-in-Charge.

Providing and fixing Single socketed pipes 110 mm diameter on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring leaving 10 mm gap for thermal expansion complete all as specified and directed by Engr-in-Charge.

Providing and fixing 75 mm bend on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring leaving 10 mm gap for thermal expansion complete all as specified and directed by Engr-in-Charge.

Providing and fixing 110 mm bend on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring leaving 10 mm gap for thermal expansion complete all as specified and directed by Engr-in-Charge.

Providing and fixing 75 mm Single tee with door on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring leaving 10 mm gap for thermal expansion complete all as specified and directed by Engr-in-Charge.

Providing and fixing 110mm Single tee with door on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring leaving 10 mm gap for thermal expansion complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) Vent cowl 75 mm dia complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) Vent cowl 110 mm dia complete all as specified and directed by Engr-in-Charge.

Dismantling C.I. pipes Up to 150 mm diameter metre including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metre lead complete all as specified and directed by Engr-in-Charge.

Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes (within 50 metres lead) as per direction of Engineerin-Charge.

Providing and fixing 15 mm nominal dia Pipes Chlorinated Polyvinyl Chloride (CPVC) pipes Concealed work, including cutting chases and making good the wall etc, having thermal stability for hot & cold water supply,Concealed work, including cutting chases and making good the walls etc including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete all as specified and directed by Engr-in-Charge.

Providing and fixing 20 mm nominal dia Pipes Chlorinated Polyvinyl Chloride (CPVC) pipes for External work, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete all as specified and directed by Engr-in-Charge.

Providing and fixing square-mouth S.W. gully trap 180x150 mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design complete all as specified and directed by Engr-in-Charge.

Providing and fixing Stainless steel SS grade 304 , curtain rod 20 mm dia 1.20mm thick with two brackets fixed with brass screws and wooden plugs etc. wherever necessary complete all as specified and directed by Engr-in-Charge.

Dismantling steel work manually/ by mechanical means in built up sections without dismembering and stacking within 50 metres lead complete all as specified and directed by Engr-in-Charge.

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) complete all as specified and directed by Engr-in-Charge.

Providing and fixing 6mm thick both sides Pre-laminated cement bonded wood particle board as per IS : 15786:2008 with suitable full threaded steel screws etc. on the backing of racks, drawer, cupboard, kitchen cabinet under kitchen counter etc complete all as specified and directed by Engr-in-Charge.

Providing and fixing cupboard shutter with 19mm thick one side decorative and other side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand including 2mm thick PVC edge banding tape with hot glue by edge bending machine etc. with auto closing spring loaded hinges (hydraulic type) etc. complete all as specified and directed by Engr-in-Charge. (Payment of providing and fixing auto closing hinges shall be paid separately)

Providing and fixing 19mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand for boxes, shelves, racks, almirah, cupboard and drawer etc. including necessary nails, screws etc complete all as specified and directed by Engr-in-Charge.

Providing and fixing 200 mm long stainless steel fancy handle of approved make fixed with SS screws etc complete all as specified and directed by Engr-in-Charge.

Providing and fixing stainless steel soft closing spring hinges at 0 degree hinges (hydraulic type) to cupboard shutters with full threaded steel screws including making necessary recess in board and finished etc complete all as specified and directed by Engr-in-Charge.

Providing and fixing stainless steel soft closing heavy type telescopic drawer channels of approved make 500 mm long with screws etc complete all as specified and directed by Engr-in-Charge.

Providing and fixing ready made 304 grade stainless steel Modular kitchen basket and accessories such as right angle basket (Plain Cup & Saucer, plant, Partition, Bottle rack, Thali, Cutlery) kitchen utensil basket, Dinner set basket, kitchen grain basket, Multipurpose basket as per site requirement including finishing (wherever required) and fittings. The same shall be fixed with necessary stainless steel nuts & bolts, Stainless Steel screws & telescopic channel etc. as per direction of Engineer-in charge. (For payment purpose only weight of Stainless steel basket shall be considered excluding weight of all fixing accessories such as nuts, bolts, fasteners telescopic basket channels etc. Payment of providing and fixing telescopic channel shall be paid separately) complete all as specified and directed by Engr-in-Charge.

Dismantling of old S.W. pipes including excavation of soil breaking of joints and bed concrete stacking of useful materials near the site within 50 m lead and disposal of unserviceable materials into municipal dumps for 150 mm dia pipe complete all as specified and directed by Engr-in-Charge.

Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 including testing of joints etc. complete :for 150 mm dia pipe complete all as specified and directed by Engr-in-Charge.

Providing and laying cement concrete 1:5:10 (type E2 using stone aggregate 40 mm nominal size) up to haunches of RCC NP 2 pipes including bed concrete as per standard design : for 150 mm NP2 pipe complete all as specified and directed by Engr-in-Charge.

Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (type B1 using stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 finished with a floating coat of neat cement and making necessary channels for the drain etc. complete : For pipes 100 to 250 mm diameter

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and directed by Engr-in-Charge.

Taking down the ceiling fan/exhaust fan and painting the same with one or more coats of spray painting with synthetic enamel paint to give an even shade, including cleaning of surface with detergent and replacing the damaged rubber reel, nuts and bolts with washers and safety pins, refixing the same as required complete all as specified and directed by Engr-in-Charge.

Wiring for light point/Socket point/ fan point/exhaust fan point/call bell point with 1.5 sq mm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit, and earthing the point with 1.5 sq mm FRLS PVC insulated copper conductor single core cable etc. as required (a) One light point controlled by one; one way switch complete all as specified and directed by Engr-in-Charge.

(b) All as per item No 3 above but for One ceiling/Exhaust/ Wall fan point controlled by one; one way switch complete all as specified and directed by Engr-in-Charge.

(c) All as per item No 1 above but for One 3 pin 5 Amp socket out let controlled by one switch indep board complete all as specified and directed by Engr-in-Charge.

Wiring with 2.5 sq mm FRLS PVC insulated multistranded copper conductor cables single core cable in surface/recessed medium class PVC conduit for one 3 pin socket outlet, 5/15Amps, independent, and earthing the point with 2.5 sq mm FRLS PVC insulated, unsheathed, copper conductor single core cable etccomplete all as specified and directed by Engr-in-Charge.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engr-in-Charge.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engr-in-Charge.

Supply and fixing Elegantly designed sleek surface mounted pressure die-cast aluminium luminaire 15 Watts in powder coated white finish in square profile with optimized heat sink for efficient heat dissipation and independent electronic LED driver complete all as specified and directed by Engr-in-Charge.

S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engr-in-Charge.

Supply and fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. complete all as specified and directed by Engr-in-Charge. (a) 15/16 Amp switch, 1 module

(b) 6 Pin 15/16 A socket outlet

(c) 3 Pin 5/6A Socket outlet

supplying and fixing 3 module (100 mm x 75 mm) size/modules, GI box alongwith modular base & cover plate for modular switches in recess etc. complete all as specified and directed by Engr-in-Charge.

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc complete all as specified and directed by Engr-in-Charge.

Supply and fixing 3 pin, 5A ceiling rose on the existing junction box/ wooden block including connections etc complete all as specified and directed by Engr-in-Charge.

Wiring for circuit submain wiring along with earth wire with 4 x 6 sq mm + 2 x 6 sq mm earth wire of FRLS PVC insulated copper conductor, single core cable in surface/recessed medium class PVC conduit as required including taking down old unserviceable submain wiring complete all as specified and directed by Engr-in-Charge.

Wiring for circuit. Submain wiring along with earth wire with 4 x 10 sq mm + 2 x 10 sq mm earth wire of FRLS PVC insulated copper conductor, single core cable in surface/recessed medium class PVC conduit as required including taking down old unserviceable submain wiring complete all as specified and directed by Engr-in-Charge.

Wiring for circuit. Submain wiring along with earth wire with the 3 x 6 sq mm of FRLS PVC insulated copper conductor, single core cable in surface/recessed medium class PVC conduit as required including taking down old unserviceable submain wiring complete all as specified and directed by Engr-in-Charge.

Supplying and fixing CRCA sheet steel, RAL 9003, powder coated Vertical TPN DB double door, 6 way, IP 54 protection with provision for 3 pole and 4 Pole MCCB as incomer and SP/TP MCBs as outgoings, conforms to IS 8623-1 & 3, IEC 61439-1 & 3, IK 09, provided with insulated vertical phase bus-bars, neutral bar/s with shroud/s, earth bar/s, sticking saddles, cement spill protector, color-coded interconnecting wire set, cable ties' blanking plates and circuit identification labels including taking down old unserviceable distribution board complete all as specified and directed by Engr-in-Charge.

Supplying and fixing CRCA sheet steel, RAL 9003, powder coated Vertical TPN DB double door, 4 way, IP 54 protection with provision for 3 pole and 4 Pole MCCB as incomer and SP/TP MCBs as outgoings, conforms to IS 8623-1 & 3, IEC 61439-1 & 3, IK 09, provided with insulated vertical phase bus-bars, neutral bar/s with shroud/s, earth bar/s, sticking saddles, cement spill protector, color-coded interconnecting wire set, cable ties' blanking plates and circuit identification labels including taking down old unserviceable distribution board complete all as specified and directed by Engr-in-Charge.

Providing and fixing 100A rating, 30 KA breaking capacity, FP MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including driling holes in cubicle panel, making connections, etc., as required including taking down old unserviceable MCCB complete all as specified and directed by Engr-in-Charge.

Supply and fixing MCCB 63A, 415V, 16 KA, 4 Pole with thermomagnetic release and terminal spreaders in existing cubicle panel board including driling holes in cubicle panel, making connections, etc., as required including taking down old unserviceable MCCB complete all as specified and directed by Engr-in-Charge.

Supply and fixing 415V, 10KA 'C' curve miniature circuit breaker (MCB) of triple pole and neutral and current carrying capacity 63A in the DB complete with connection testing and commissioning including taking down old unserviceable MCB complete all as specified and directed by Engr-in-Charge.

Supply and Fixing 5A to 32A rating, 240V, 10kA, "C" curve, miniature circuit breaker suitable for inductive load of single pole in the MCB DB complete with connection, testing and commissioning etc as required including taking down old unserviceable MCB complete all as specified and directed by Engr-in-Charge.

Supplying and fixing 20/32A, 240V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug alongwith 20/32A "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required including taking down old unserviceable socket outlet complete all as specified and directed by Engr-in-Charge.

Supplying and fixing 30/40A, 415V, TPN Industrial type socket outlet, with 4 pole and earh, metal enclosed plug top along with 30A "C" curve, TP MCB, in sheet steel enclosure, on surface or in recess with chained metal cover for the soket outlet and complete wwiht connections, testing and commissioning etc. as required including taking down old unserviceable socket outlet complete all as specified and directed by Engr-in-Charge.

Earthing with GI earth plate 600mm × 600mm× 6mm thick including accessories,and providing masonary enclusure with cover plate having locking arrangment and watering pipe of 2.7 meter long etc with charcoal/ coke and salt as required in any type of strata including taking down old unserviceable earthing complete all as specified and directed by Engr-in-Charge.

Providing and laying earth connection from earth electrode with 6 SWG dia G.I. wire in 15 mm dia G.I. pipe from eath electorde including conneciton with G.I. thimble excavation and re-filling as required including taking down old unserviceable one complete all as specified and directed by Engr-in-Charge.

Shree Ayyappa Engineering (BID ID -3090849)

Vipul Enterprises (BID ID -3088384)