CERTAIN BR REPAIR AND MAINT WORKS IN 108 TA INF BN, 372 SUPPLY, OTHER SMALL UNITS AND MISC REPAIR TO SECURITY FENCING, BARBED WIRE, GATE AND FOOTPATH IN AGE BR-I AREA UNDER GE SAUGOR

Amount

M&L for brickwork with subclass 'B' bricks, straright or corved on plan exc 6m mean radius built in cement mortar 1:6 including demolition of brick work with all quoins arches , pillars, etc., built in cement mortar and removing rubbish from site complete all as specified and directed

All as per Srl item No 2 as above but except bricks. Note:-Serviceable bricks obtained from demolition shall be re-used in this item.

M&L for stone walling of random rubble, uncoursed well bonded, bedded and solidly hearted built in cement mortar 1:6 including demolition of rubbled stone masonry with all quoins arches , pillars, etc., built in cement mortar and removing rubbish from site complete all as specified and directed

All as per Sr item No. 3 but except stone. Note:-Serviceable stones obtained from demolition shall be re-used in this item.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc and removing rubbish from site complete all as specified and directed

M&L for rendering 20 mm thick cement plaster in cement mortar 1:6 on stone masonary surfaces/ other than fair faces finished surfaces of brick wall finishing the surfaces even and smooth without using extra cement complete all as specified and directed

M&L for rendering 15mm thick cement plaster on wall in cement mortar 1:6 on brick wall / Concrete surfaces of finishing the surfaces even and smooth without using extra cement complete all as specified and directed

M&L for rendering 15mm thick cement plaster on wall in cement mortar 1:4 on brick wall / concrete surfaces of finishing the surfaces even and smooth without using extra cement complete all as specified and directed

M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in CM (1:3) in ceiling complete all as specified and directed .

M&L for preparing the new plastered surfaces and applying three coats of white wash on walls complete all as specified and directed.

M&L for preparing the old decorated surfaces and applying two coats of white wash on walls complete all as specified and directed.

M&L for prepration of new wall surfaces & applying Birla / J. K. wall care white putty 2 mm thick for levelling the surfaces including properly making of 'V' shaped crakes and filling of all crakes with crakes seal of walls and applying two coat of interior emulsion distemper over a coat of wall primer including preparation of surfaces of walls complete all as specified and directed.

M&L for complete removal of existing treatment on wall and prepration of old surfaces & applying Birla / J. K. wall care white putty 2 mm thick for levelling the surfaces including properly making of 'V' shaped crakes and filling of all crakes with crakes seal of walls and applying two coat of interior emulsion distemper over a coat of wall primer including preparation of surfaces of walls complete all as specified and directed.

M&L for applying two coats of exterior weather coat over one coat of exterior primer including preparation of surfaces of new walls complete all as specified and directed. Make:- Asian Ace or equivalent make as approved by GE

M&L for applying one coat of exterior weather coat including preparation of surfaces of old walls complete all as specified and directed. Make:- Asian Ace or equivalent make as approved by GE

M&L for applying three coats of white wash on new plastered ceiling surface including preparation of surfaces complete all as specified and directed.

M&L for applying two coats of white wash on old decorated ceiling surface including preparation of surfaces complete all as specified and directed. .

Demolition of cement concrete in ground floors and pavings not exc 15cm below or above ground floor and removing rubbish from site complete all as specified and directed.

M&L for cement concrete 1:3:6, type C-1 (using 20mm graded stone aggregates) as in plinth protection 75mm thick finishing cement concrete surfaces finished even & smooth without using extra cement joints to be filled with sealing compound grade 'A' complete all as specified and directed.

M&L for PCC 1:4:8, type D-2 (using 40mm graded stone aggregates) as in foundation filling and mass concrete complete all as specified and directed.

M&L for PCC 1:2:4, type B-1 (using 20 mm graded stone aggregates) as in surface channels and drain complete all as specified and directed.

M&L for 25 mm thick PCC 1:2:4, type B1 (using 20 mm graded stone aggregates) as in sub base of floor to receive tiles cement complete all as specified and directed.

M&L for 50mm thick PCC 1:2:4, type B1 (using 20mm graded stone aggregates) as in floors, finished even and smooth without using extra cement complete all as specified and directed.

S&F glass dividing strips, 3mm thick & inserted in position to conform to design, width of strip 38 mm complete all as specified and directed

M&L for coloured anti skid ceremic tiles 7 to 8 mm thick, area of each tiles exc. 0.06 sqm and not exc. 0.11 sqm as in floor set & jointed in neat cement slurry and pointed in white cement mixed with pigment to match the colour of tiles laid over & including 15 mm thick screed bed in CM 1:6 including dismantling of floor tiles with cement mortar bedding and rubbish off the premises complete alll as specified and directed..

M&L for glazed coloured ceramic tiles of size 450mmx 300mm x 7 to 8mm thick , joint free (rectified) on vertical surfaces such as skirting/dado set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the colour of tiles laid over & including 10 mm thick rendering in CM 1:4 including dismantling of wall tiles / terrazo with cement mortar bedding and rubbish off the premises complete alll as specified and directed.

M&L for coloured anti skid ceremic tiles 7 to 8 mm thick area of each tiles exc. 0.18 sqm and not exc. 0.36 sqm as in floor set & jointed in neat cement slurry and pointed in white cement mixed with pigment to match the colour of tiles laid over and including 15 mm thick screed bed in CM 1:6 including dismantling of floor tiles / terrazo including cement mortar bedding and rubbish off the premises complete alll as specified and directed..

M&L for coloured anti skid ceremic tiles 7 to 8 mm thick area of each tiles exc. 0.18 sqm and not exc. 0.36 sqm as in skirting, dado & jointed in neat cement slurry and pointed in white cement mixed with pigment to match the colour of tiles laid over and including 10 mm thick rendering in CM 1:4 including dismantling of wall tiles / terrazo with cement mortar bedding and rubbish off the premises complete alll as specified and directed.

M&L for 600mm x 600mm x 8mm to10 mm thick coloured vitrified tiles in floors set & jointed in neat cement slurry and pointed in white cement mixed with pigment to match the colour of tiles laid over and including 15 mm thick screed bed in CM 1:6 including dismantling of floor tiles / terrazo including cement mortar bedding and rubbish off the premises complete alll as specified and directed..

S&F for 600 x 600x 8mm to 10mm thick coloured vitrified tiles in Skirting , dado & jointed in neat cement slurry and pointed in white cement mixed with pigment to match the colour of tiles laid over and including 10 mm thick rendering in CM 1:4 including dismantling of wall tiles / terrazo with cement mortar bedding and rubbish off the premises complete alll as specified and directed.

M&L for coloured designer tiles exterior grade ( ENDURA or equivalent make as approved by GE ) 10 mm thick laid over and including 15 mm thick cement mortor 1:6 set and jointed in floor and pointed in neat cement slurry with grey cement and pigment in floor including dismantling of floor tiles / terrazo including cement mortar bedding and rubbish off the premises complete alll as specified and directed..

M&L for mirror polished Machine cut Kota stone slab flooring 18-20 mm thick size not less then 550X550 mm over 20 mm thick screed in CM(1:6) laid & jointed with grey cement slurry mixed with pigment to match the colour of tiles the shade of the slab including rubbing & polishing including dismantling of floor tiles / terrazo including cement mortar bedding and rubbish off the premises complete alll as specified and directed..

M&L for Kota stone slab 12mm to 15mm thick as in skirting laid over and including 15mm thick plater in CM (1:4) & jointed with grey cement slurry mixed with pigment to match the colour of tiles the shade of the slab including rubbing & polishing including dismantling of wall tiles / terrazo with cement mortar bedding and rubbish off the premises complete alll as specified and directed.

M&L for machine pressed precast cement concrete coloured chemically treated interlocking paver block any shape and size conforming to IS-15658-2006 of 60 mm thickness M-35 grade with grey cement and pigment laid over and including 25mm thick uniformly levelled surface of stone dust cushioning including dismatling exisiting tiling complete all as specified and directed .

M&L for 18 mm to 20 mm thick granite slab (table rubbed and -polished ) , machine cut, laid over and including 15 mm thck cement plaster in CM (1:3) on vertical surface of wall, pillars, steps, jambs, pillars, windowcills, cooking platforms and jointed witht grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing edges to be rounded including dismantling of old exisitng stone or flooring of any description & removing rubbish outside MoD land complete all as specified and directed.

M&L for rounding/ chamferring to edges of stone slabss one edge , such as in steps , cooking plateform and other similar situations complete all as specified and directed.

M&L for cement concrete 1:2:4, type B0 ( using 12.5 mm graded stone aggregates ) as in coping , apex stone , bed plate , kerbs including weathering , slightly rounded or chamferred angles and throating and incl. necessary form work complete all as specified and directed

M&L for cutting chases, pinning in, in brick wall for concealed water tubing and making good, in cement mortor 1:3 cutting not exceeding 10cm girth complete all as specified and directed.

S&F GI tubing 15 mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors including taking down 15 mm bore GI tubing and connection complete all as specified and directed .

Taking down and refixing old 15mm GI tubing and connection in new or old position ( wall, floor, wall etc ) complete all as specified and directed .

S&F GI tubing 20 mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors including taking down 20mm bore GI tubing and connection complete all as specified and directed .

Takingdown and refixing old 20mm GI tubing and connection in new or old position ( wall, floor, wall etc ) complete all as specified and directed . .

S&F in repairs brass chromium plated 15 mm bore Wall mixer for mixing Hot & Cold water with arrangement of head shower and with hand shower complete ,high pressure, screwed down for iron pipe complete all as specified and directed .

S&F in repairs 15mm bore brass chromium plated WHB mixer for mixing Hot & Cold water high pressure, screwed down for iron pipecomplete all as specified and directed .

S&F in repairs 15mm bore C P bib taps, cast copper alloy fancy type two way with crutch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repairs choromium plated brass health jet foucet suitable for EWC including CP chord and brass nozzle and fixed to pipe complete all as specified and directed .

S&F in repair PVC float valve assembly including assessories with float valve 20mm dia complete all as specified and directed .

S&F in repair soap dish brass chromium plated fixed to wall with brass chromium plated screw and wooden/ plastic plug complete all as specified and directed .

S&F in repair 15mm bore C P bib taps, cast copper alloy with crutch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repair angular/ concealed stop valve , 15mm dia, cast copper alloy,CP with long shank and cup screwd down, high pressure ,screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified and directed .

S&F in repair Gun-metal, globe or gate valves 20mm bore, with iron wheel head, screwed both end for iron pipe complete all as specified and directed .

S&F in repair 15 mm bore bib tap standard of PTMT any colour high pressure screwed for iron pipe complete all as specified and directed .

S&F in repair pillar taps, fancy type cast copper alloy with capstan heads, chromium plated, screwed down, high pressure with or without lettered “hot” or “cold” with long screwed shanks and fly nut screwed for iron pipe of 15mm bore complete all as specified and directed .

S&F in repairs PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed .

S&F in repair PTMT PVC grating dome type of 100 mm dia complete all as specified and directed ..

S&F in repairs brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed ..

S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste pipe including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified & directed.

S&F in repairs sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified & directed.

S&F in repair vitreous China WHB white flat back size 550x400mm including S&F angle iron brackets, C.P pillar tap fancy type 01 No 15mm bore, CP waste coupling, 32mm dia and PVC waste pipe 32mm dia and PVC connection 450mm long high pressure complete all as specified & directed.

S&F in repair vitreous China squatting pan 'Orrisa pattern' size 580x440mm white with integral foot rests any pattern including provn of cement concrete bedding and making connection with & including 'P' or 'S' trap complete all as specified and directed.

S&F in repair vitreous China wash down water closet pan (pedestal pattern), white including white seat cover complete all as specified and directed .

S&F in repair vitreous China urinal bowl, flat back of size 465x355x265mm (minimum) white with grating and union for discharge pipe , waste pipe (excluding flushing cistern,flush pipe ) complete all as specified and directed .

S&F in repair PVC low level flushing cistern of 10 Ltr capacity including flushing pipe bend PVC bend complete all as specified and directed.

S&F in repair 75 mm size brass chormium plated shower rose with long body including fixing to steel pipe or union complete all as specified and directed .

S&F in replacement 1000 ltr capacity of rotational moulded polyethyline water storage tank, three layered wall construction (cylindrical vertical with closed type) hoisted & fixed in position complete all as specified and directed .

S&F in replacement 500 ltr capacity of rotational moulded polyethyline water storage tank, three layered wall construction (cylindrical vertical with closed type) hoisted & fixed in position complete all as specified and directed .

S&F in repair 110mm dia PVC(SWR) pipes single soketed in any length with adhesive joint fixed to wall including mild steel clamps complete all as specified and directed .

S&F in repair 110mm dia PVC(SWR) pipes single soketed in any length with adhesive joint fixed to floor or trenches including fittings complete all as specified and directed .

S&F PVC (SWR) bends 110 mm dia complete all as specified and directed.

S&F in repair for PVC (SWR) bends of bore 110mm with acess door complete all as specified and directed.

S&F in repairs PVC (SWR) 110 mm dia junction, single(single 'T') equal or unequal complete all as specified and directed .

S&F in repairs PVC (SWR) pipes 75mm bore single socketed, in any length with solvent joints laid in trenches or in floors with fittings complete all as specified and directed .

S&F PVC (SWR) bends 75 mm dia complete all as specified and directed.

S&F PVC (SWR) bends 75 mm dia with acess door complete all as specified and directed.

S & F in repairs for 75 mm dia PVC ( SWR) floor trap with grating including jointing with solvant complete all as specified and directed .

Taking down chowkhats or frames with shutters (w/o taking off shutters from the frames) not exc 1.5 sqm each complete all as specified and directed .

Taking down chowkats or frames with shutters (w/o taking of shutters from the frame) exc 1.5 but not exc 4 Sqm each complete all as specified and directed .

Taking down shutters of any description not exc 1 sqm each complete all as specified and directed .

Taking down shutters of any description exc 1 sqm but not exc 2 sqm each complete all as specified and directed .

S&F second class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed . .

S&F 35mm thick second class hardwood factory made plain framed, penelled shutter (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces (The size of rail and stile as per : IS 1003 (part I), kiln seasoned and chemically pressure treated) complete all as specified and directed ..

S&F second class hardwood factory made glazed and skeleton shutters 35 mm thick open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chemfered or rounded, fitted with cut and mitred beads for securing glass, etc,sizes of members of shutters as specified in SSR Part-I, Section 8, cla-use 8.24 (a),for doors supplied and fitted to chowkats complete all as specified and directed.

S&F 30 mm thick flush shutters, solid core construction, with block board core and plywood facepanels, commercial type on both sides, complete all as specified and directed(with double or single shutter complete all as specified and directed.

S&F second class hardwood factory made 30mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc (with sash bars any numbers), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc, for windows and ventilator all as per SSR Part-I clause 8.24 (b) complete all as specified and directed.

S&F 30mm thick second class hardwood factory made glazed and skeleton shutters , open rebated and prepared to receive glass, guaze, etc.(without sash bars), edges of framing plain chamfered or rounded fitted with cut and metered beads for securing glass etc . size of members of shutters as specified in SSR-I , section-8, clause-8.24(b) for windows and ventilator complete all as specified and directed..

S&F steel window with side hung shutter incl. box type hinges with steel handle, and steel peg stay, 25X3 mm mild steel flat iron 200 mm long as in hold fasts complete with glazing bar , dovetailed or welded complete all as specified and directed. .

S&F steel window with side hung shutter incl. box type hinges with steel handle and steel peg stay , 25X3 mm mild steel flat iron 200 mm long as in hold fasts complete without glazing bar , dovetailed or welded complete all as specified and directed.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm thick wood grain printed PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match the colour of tiles with printed sheet reinforced with MS square tube complete all as specified and directed.

S&F factory Made Solid PVC Moulded Door Shutter with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face,incl 03 Nos of 100mm size stainless steel butt hinges for each shutter complete all as specified and directed.

S& F glazed (5.0 mm thick plain / coloured glass) aluminum door powder coated consisting of frame of 63mm x 38 mm size with shutter fixed on frame both side openable on pivotal arrangement with including necessary cutting holes in wall & floor Door shutter consists of top rail size is 83 x 44 mm , bottom rail & lock rail size is 110 x 44 mm & style of door shutter is 83mmx 44 mm with handles 2 Nos in each door , hinges has fitted on frame as required fixed with rubber gasket & aluminum beading any No of panels with aluminum handle , locking arrangemen,floor spring and floor door stopper incl. necessary joining cleats , glazing clips etc (Al. section thickness 2 mm ) confirming to IS. complete all as specified and directed.

S&F aluminium windows and ventilators sliding type three track powder coated consisting of frame 91.80 mm x 45 mm shutters 39 mm x 18 mm with rollers and locking arrangements with 4 mm thick plain glass with rubber gasket and aluminium beading , Al. handle,aluminium grill with fixing arrangement (wt. of grill not less then 2.50 kg/sqm),aluminium wire mess 0.45 mm dia etc including necessary cutting holes on wall and floor and confirming to IS complete all as specified and directed. (Al. section thickness 1.50 mm }

M& L for repair of existing aluminium door with taking down and refixing in same location including all necessary fitment for repair complete all as specified and directed.

S&F in repairs floor spring for aluminium door ISI marked complete all as specified and directed.

Hacking out old broken glass (any tickness, size,quality or description) from wooden / steel framesglazed with oil putty or fixed with beads complete all as specified and directed.

S&F 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed.

S&F 3 mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 (using 20mm graded stone aggregates) as in filling of hold fast complete all as specified and directed.

M&L for preparing surface of wood & wood based materials, steel & iron work, new or old, of any description & girth, not otherwise described, & treated with tar or coal tar black paint complete all as specified and directed.

All as per Srl item No.99 as above but treating small articles such as stop, covers, gully gratings, holdfasts, ends of posts, backs of chowkats, etc., area not exc 0.1 sq. m each.

S&F mild steel hold fasts, plain angle cleats for securing purlins ,and similar small articles conforming to Fe 290 gde E 165 complete all as specified and directed.

S&F framed work such as grills gratings, sunshed cover fixed with nut bolts incl,cutting drilling holes etc., with ends of bars shouldered and/ or riveted, similar work conforming to Fe 290 gde E 165 complete all as specified and directed.

S&F galvanised mild steel wire cloth, 0.46 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

S&F in repair galvanised mild steel wire cloth, 0.46 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete including necessary wooden beading all as specified and directed.

M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enameled paint over a coat of red oxide primer complete all as specified and directed.

S&F Butt hinges of 100 mm size, Medium weight, cold rolled mild steel complete all as specified and directed.

S&F 75mm size butt hinges meadium weight , cold rolled MS complete all as specified and directed.

S&F door stopper of aluminium alloy body and tongue 150 mm long , anodised fixed in door with screws complete all as specified and directed.

S&F in repairs 150mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F 200 mm size aluminium anodised, barrel tower bolts, of extruded section and fixed complete all as specified and directed.

S&F 125mm long, Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F 150 mm aluminium anodised cast type handles and fixed complete all as specified and directed.

S&F 100 mm size, Aluminium handles, cast type, anodised complete all as specified and directed..

S&F Aluminium alloy, anodised, sliding door bolt 250 mm long dia not less then 12 mm with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed..

S&F GI ( cold rolled) snap grid size of 600mm x 600 mm frame work of 24 x 38 x 0.60 mm, Tee Section ( bottom pre coated ) and 24 x 24 x 0.5 mm thick angle rung along the wall incl GI suspenders wire as per manufacturer instruction as in ceiling with and incl S & F white Non Asbestos designer ceiling cement boards 4 mm thick including dismantling of existing ceiling boards (fiber, pulp, insulation, etc.) or insulation board/slabs/blankets, any thickness, including frames complete all as specified and directed...

Dismantling unframed timber scantlings 40 sq. cm & over in section, in any position.

M&L second class hardwood in scantlings , timber clean sawn framed and fixed .

S&F rolled mild steel sections as in main & cross beams, hip & jack rafters; purlins of squar pipe,tubular or angle where connected to common rafters & running rails & guides for sliding doors; fixed with angle cleats or other connecting plates GDE Fe410-0 or Fe 310-0 complete all as specified and directed

M&L 6mm thick asbestos cement, corrugated or semi-corrugated shets in roofs Fixed with L-type or J-type or cranked hook bolts including dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed..

Taking down and refixing asbestos cement, corrugated or semi-corrugated shets as in roof covering complete all as specified and directed.

S&F 6mm thick asbestos cement serrated ridge or hip ridge for corugated or semi corugated sheets, fixed with L-type or J-type or cranked hook bolts including dismantling existing damaged AC sheet ridge/hip for corrugated or semi corrugated sheets from roof complete all as specified and directed.

S&F 0.50 mm thick galvalume sheet profile pattern precoated coloured fixed with self driving screws complete all as specified. including dismantling old exisitng GI sheets complete all as specified and directed.

S&F 0.45mm thick galvalume plain sheet precoated coloured roof ridge fixed with self driving screws complete all as specified Including dismantling of GI sheets as in ridge complete all as specified and directed..

S&F mild steel for wind ties for roof including securing bolts, posts including all necessary drilling, bolting or riveting, etc., & similar work conforming to Fe 290-0 Gde E-165 complete all as specified and directed..

S&F in repair 25 mm bore SS Pipe curtain rods including SS Brackets & SS Decorative dome, suitable for door/widows curtain with fancy type powder coated SS dooms with ss brackets fitted to each end complete all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded all around concrete portion and making good disturbed gound including removal of debris from site complete all as specified and directed.

Demolition of reinforced cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc.complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for PCC 1:3:6, type C-2 (using 40mm graded stone aggregates) as in foundation, filling, mass concrete, sub-floors, floors etc complete all as specified and directed.

S&F mild steel angle iron as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc, flat iron fillets (for securing wire mesh etc.) including all necessary drilling bolting or riveting, etc, and similar work and similar conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F mild steel round bars 10mm dia and over, cut to length, bent to shape required, includinig cranking, bending spirally for hooping of columns, hooking ends and binding with and including mild steel wire annealed not less than 0.9 mm dia or securing with clips quality confirming to Fe-410 W complete all as specified and directed.

S&F mild steel screw bolts (machine made) with hexagonal or sguare heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or screw nut n.exc 5 cm long dia of shank 12 mm complete all as specified and directed.

Supply only mild steel galvanized chain link fencing of 4mm dia wire and 75mm X 75mm mesh size complete all as specified and directed Make:-TATA/SAIL/JINDAL

Fixing only chain link fencing including line wires, any mesh, size and type of standards, rails, straining bolts, etc. including provision of binding wire including dismantling existing wire mesh complete all as specified and directed

M&L for preparation of newly steel and iron surfaces of any description n.exc 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide paint complete all as specified and as directed.

S&F Galvanised 2 strand steel barbed wire 2.24mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel wire, staples or steel pins (each line wire to be measured) including dismantling exisitng barbed wire fencing complete all as specified and directed. Make:-TATA/SAIL/JINDAL

Surface dressing not exc 15 cm deep and getting out in soft/loose soil etc complete all as specified and directed.

M&L for reinforced cement concrete 1:1.5:3 type A 1 (using 20 mm graded stone aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under reamed piles and mass concrete complete all as specified and directed.

M&L for reinforced cement concrete 1:1.5:3 type A 1 (using 20 mm graded stone aggregate) as in columns, pillars, piers, posts and struts complete all as specified and directed.

M&L for form work to sides of pillars, posts, struts, piers, columns and stanchions square or rectangular rough finished complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over, cut length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to complete all as specified and directed.

All as per Srl item No.143 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders c -ditto-

S&F ornamental and decorative type steel gate with structural steel conforming to Fe 290, Gde-E-165 all as specified,including pintal hinges fixed on pillar in PCC blocks of size as required as site , including all locking arrangement, all as per sample approved by the Engineer -in -Charge and directed and fixed in position complete all as specified and directed. Note :-1 . The weight of manufactured steel gate shall be measured before fixed in position . Necessary arrangement for weighing the steel gate shall be made by the contractor at his own expense . The contractor shall quote the unit rate accordingly.2. Steel gate shall be manufactured as per sample approved by the Engineer -in - Charge .

M&L for point wiring with 1.5 Sqmm PVC insulated FR, unsheathed, copper conductor stranded 1100 volt grade cable in & incl PVC trunking of size not less than 20mm ISI marked ivory white with all accessories such as tee, bend, joint cover including anodized MS sunken boxes made out of MS sheet of thickness not less than 1.6 mm with earth dolly and PVC laminated hylem/Anchor ISI marked top cover 3.0 mm thick for mounting of switches/sockets/ regulator etc and PVC insulated & unsheathed 1100 volt grade copper conductor, stranded 1.5 sqmm. cable as continuous earth lead and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green including taking down carefully copper/aluminum pt wiring (light fan, socket or power) complete including fittings such as switches, sockets, c/roses, lamp holders, tube light fittings, sketch fittings, wooden boards, bell push, call bell, MCBs, & regulators etc & making good to disturbed surfaces & matching with the existing colour of wall/floor complete all as specified and directed:-.

For one light point or fan point controlled by one switch

For one Call Bell point controlled by one push button switch

For 5Amp independent socket point controlled by one switch

For one 3 pin ,5 Amp socket point with other switch on the same board

All as per item No.146 here in before but for power point wiring using with 2.5 sqmm PVC FR insulated ,unsheathed, copper conductor stranded 1100 volt grade cable and 2.5 sqmm PVC insulated ,unsheathed, copper conductor stranded 1100 volt grade cable as continuous earth wire

M&L for concealed point wiring with 1.5 Sqmm PVC-FR insulated, unsheathed, copper conductor, stranded 1100 volt grade cable in & incl PVC conduit, including modular metal flush boxes & modular white cover plate of suitable module with frame as per site requirement all fittings such as tees, bends, elbows, etc. all as per site requirements PVC insulated & unsheathed 1100 volt grade copper conductor, stranded 1.5 sqmm. cable as continuous earth lead and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green taking down carefully copper/aluminum pt wiring (light fan, socket or power) complete including fittings such as switches, sockets, c/roses, lamp holders, tube light fittings, sketch fittings, wooden boards, bell push, call bell, MCBs, & regulators etc & making good to disturbed surfaces & matching with the existing colour of wall/floor complete all as specified and directed:-.

For one light point or fan point controlled by one switch

For one Call Bell point controlled by one push button switch

For 5Amp independent socket point controlled by one switch

For one 3 pin ,5 Amp socket point with other switch on the same board

All as per Srl item No.148 here in before but for power point wiring using with 2.5 sqmm PVC FR insulated ,unsheathed, copper conductor stranded 1100 volt grade cable and 2.5 sqmm PVC insulated ,unsheathed, copper conductor stranded 1100 volt grade cable as continuous earth wire

S&F modular switch, one way,6 Amp 230, 1 module complete all as specified and directed

S&F modular socket 6 Amp-2/3 pin combined 2 module complete all as specified and directed .

S&F modular switch, one way,6 A/16 Amp 230, 1 module complete all as specified and directed .

S&F modular socket 6 A/16-2/3 pin combined 2 module complete all as specified and directed.

S&F modular fan step regulator 120 Watt -2 module complete all as specified and directed .

S&F modular bell push 6A one module complete all as specified and directed.

S&F switch piano type flush, single pole, one way 5 A, 230 V complete all as specified and directed.

S&F socket outlet, 5 pin, 5 Amp, flush type, 230 V complete all as specified and directed.

S&F switch piano type flush, single pole, one way 15 A, 230 Vcomplete all as specified and directed.

S&F socket outlet 2 in 1,6 pin, 5/15 A, flush piano type 240 V complete all as specified and directed

S&F ceiling rose, surface backlite,three terminal complete all as specified and directed .

S&F lamp holder insulated with back plate suitable for Angle/Batten fitting complete all as specified and directed

S & F in repair/replacement bell ding dong 230 V, single phase complete all as specified and directed.

S&F bell push flush type one way 5Amp 240 Volt complete all as specified and directed

S&F surface conduit sub main wiring with two single core PVC FR insulated unsheathed stranded copper conductor cable FR, 02 runs of 01 Single core of size 6 sqmm (for main current) drawn in & incl PVC conduit conduit PVC trunking of suitable size . ISI marked with all accessories such as tee, bend, joint cover etc round / square blocks at junctions etc, all as per site requirements ISI marked with one run of 01 Single core of size 6 Sqmm (As earth wire) PVC insulated unsheathed stranded copper conductor as a continuous earth wire complete all as specified including taking down old unserviceable sub main wiring and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green complete all as directed by Engineer-in-Charge

S&F sub main wiring with two single core PVC FR insulated unsheathed stranded copper conductor cable FR, 02 runs of 01 Single core of size 4 sqmm (for main current) drawn in & incl PVC Casing-n-caping of suitable size ISI marked with all accessories such as tee, bend, joint cover etc round / square blocks at junctions etc, all as per site requirements ISI marked with one run of 01 Single core of size 4 Sqmm (As earth wire) PVC insulated unsheathed stranded copper conductor as a continuous earth wire complete all as specified including taking down old unserviceable sub main wiring and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green complete all as directed by Engineer-in-Charge.

S&F in replacement testing and commissioning of MCB SP 240 volt 6 Amp to 40 Amp 10 KA capacity having C-curve characteristics connected with suitable lugs complete all as specified and directed

S&F in replacement testing and commissioning of MCB SPN 240 volt 16 Amp to 40 Amp 10 KA capacity having C-curve characteristics connected with suitable lugs complete all as specified and directed

S&F in replacement sheet metal enclosure for DB double door, IP-43 when MCBs to be used SPN, 8 way, 240 V with 200 Amps rated bus bar complete all as specified and directed

S&F in replacement double door metallic sheet metal enclosure for DB double door(IP-42/43) When MCBs to be used SPN 4 ways, 240 V with 200Amps rated bus bar complete all as specified and directed

S&F electronic double space rotary 5 speed type regulator 120-280 V complete all as specified and directed.

S&F in replacement LED Bulk head designed for modern homes availave in PIR as well as non PIR sensor with premium quality diffuser for glarefree light and easy to install snapfit installer complete all as specified and directed. Make - Havells cat part no LHEXCGP7UN5W013/ BAJAJ cat part no BIBWP10WLED /CG cat part no LBHE-10-CDL.

S&F in replacement TL fitting 20 /18 watt for surface and wall mounted LED batten with ultra slim polycarbonate LED lighting fixture with high lumen output environmental friendly energy efficient complete all as specified and directed. Make Havells Cat Part No LHEXBLP7PN1W020, 4 feet/Bajaj cat part No BCLSB 20 WH/ CG Cat par No LCTC-18-CDL

S&F in replacement box type LED optic fitting 1x9 Watt 2 feet box type complete all as specified and directed . Make Havells Cat Part No LHEXBLP7IN1W009/Bajaj cat part No BCLSB10WH/ CG Cat par No LCTL-9-CDL.

S&F in replacement PVC insulated and unsheathed single core multi stranded copper conductor 1.5 Sqmm (Nominal Area) drawn in existing conduit / batten / surface complete all as specified and directed

S&F in replacement PVC casing caping of size 1" x 1/2" including fixing on wall/ceiling with clamp/saddles for wiring wire all as required at site complete all as specified and directed

S&F in replacement PVC conduit of size 20mm dia including fixing on wall/ceiling with suitable clamp/saddles for wiring wire all as required at site complete all as specified and directed.

M K Construction

v k builder

SAGAR MOTOR AND TRACTOR CO

Pandey Construction and Engrs

EX SERVICE MEN SECURITY AND MAN POWER SERVICES

A Raza Enterprises