SPECIAL REPAIR TO BLDG NO NP-25 (SINGLE LIVING OR ACCN), NP-33 AND NP-07 (SINGLE JCOs LIVING ACCN) AT GUARDS UNDER GE SATWARI

Amount

B&R PORTION:- Complete removal of existing water proofing treatment of any description including under layer, taking down of cement plaster / demolition of cement concrete any thickness and removal of debris off the premises including dismentiling of Water tank of any capecity and refixing at same position, complete all as specified.

Rendering 15mm thck in CM 1:4 mixed with integral WPC on concrete surface in roofs including applying cement slurry @ 3 Kg per Sqm finishing the surface even and fair without using extra cement ( WPC shall be measured seperately), complete all as specified.

Cleaning the entire roof surface thoroughly to remove all loose particles, dust/dirt particles and applying a coat of bitumen primer membrane 0.4ltr/sqm and applied a course of a coat of binding material with blown type bitumen of grade 85/25 heating to working temperature of 180 0 C @ 1.2 kg/sqm & then applying Polymeric Polypropylene polymer membrane “APP” (Atactic poly propylene polymer ) modified prefabricated reinforced with polyster non wove fabric (wt not less than 150 gms/sqm), density of member at 25 degree C’ 0.87-0.89Kg/liter and viscosity 70-160 CPS of five layer 3mm thick not less than 3 Kg/Sqm using butane torch with 10cm over laps all round which shall be thermo fused by flame and applying a coat of aluminum paint @ 0.10 Kg/Sqm over the APP membrane complete all as specified. (Note : WPC will measured and paid separately as supply only).

Taking down cement plaster of any description on brick work including terrazo topping or tiles, racking out jointing hacking for key scrubbling down with water and removing all the demolished material outside cantt area, complete all as specified.

Rendering 15 mm thick in CM 1:6 on brick wall surface or concrete surface finished the surface even and smooth without using extra cement upto any height of four story bldgs, complete all as specified.

Rendering 15 mm thick in CM 1:4 on brick wall surface or concrete surface finished the surface even and smoth without using extra cement upto height of any story bldgs, complete all as specified.

Rendering 10mm thck in CM 1:3 or Plain Cement Concrete 1:2:4 type B-1 as in ceilings or concrete surfaces such as chajjas, upward facia, downward facias and similar items finished even of smoth including dubbing coat without using extra cement upto any height including all necessary scaffolding, complete all as specified.

Preparation of newly plastered surfaces of wall and applying two coats distemper oil emulsion over & including a coat of wall care putty 1-3mm thick, complete all as specified.

Preparation of newly plastered surfaces of wall and applying two coats of cement base paint over & including priming surface with chalk whiting, complete all as specified.

Preparation of newly plastered surfaces and applying two coats of white wash on ceilings, complete all as specified.

Complete removal of existing white/colour wash or distempered and painted surfaces including washing, rubbing down and stopping and applying two coat of distemper oil emulsion including preparation of old surface over & including a coat of wall care putty1-3mm thick, complete all as specified.

Preparation of old treated plastered surfaces of wall and applying a coats of cement base paint, complete all as specified.

Complete removal of existing white wash and preparation of old plastered surfaces of wall and applying two coats of white wash, complete all as specified.

Applying two coats of white wash on ceilings including preparation of old treated surface including taking down all peeling off white wash, complete all as specified.

Taking down chowkats or frame with shutters (without taking off shutters from the frames) area not exceeding 1.5Sqm each including iron mongrey and making good in cement mortar in CM I:3 or cement concrete 1:2:4 type B-I, complete all as specified.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) area exc. 1.5Sqm and n.exc. 4Sqm each including iron mongrey and making good in cement mortar in CM I:3 or cement concrete 1:2:4 type B-I, complete all as specified.

Taking down shutters of any description not exceeding 1sqm each including iron mongrey, complete all as specified.

Taking down shutters of any description exe 1 sqm n exe 2.00 Sqm including iron mongrey complete all as specified.

Taking down shutters of any description exe 1 sqm n exe 2.00 Sqm and refixing it in same opening including prov of new iron mongrey, complete all as specified.

Pressed steel frame of size105x60mm for doors with single rebated including mild steel hinge medium weight 100 mm long and 25x3 mm flat iron in holdfast, tie bar all necessary fixing arrangement complete all as specified.

Pressed steel frame of size 125x60mm for doors with single rebated including mild steel hinge medium weight 100 mm long and 25x3 mm flat iron in holdfast, tie bar all necessary fixing arrangement complete all as specified.

Plain Cement Concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregate as in back filling of pressed door frames, complete all as specified.

Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing, confirming to Fe-410-W (Gde E-250) quality-B complete all as specified.

Plain framed panelled shutters factory made 35mm thick of 2nd class hard wood rail and style (two panel) with lock rail and panel of 9mm B.W.P commercial ply or 12 mm veneered particle board with commerciel venering on both faces. the size of rail and style as per IS:1003 (part I) kiln seasoned and chemically pressure treated, complete all as specified.

2nd class hard wood factory made glazed and skelton shutters open rebated and prepared to receive glass, gauge etc (without sash bars), edges of framing plain chamffred or rounded,fitted with cut and mitered beads for securing glass, etc size of members of shuters as spd in SSR Part-I, Section 8, clause 8.24 (a) ; supplied and fixed to chowkats of 35mm thick complete all as specified.

Factory made solid core PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC sheet, 'C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap inserted for top rail and bottom rail; panelling of plain colour PVC sheet to be fitted in MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified & shown in relevant drawing of item No. 08080 in MES Schedule (Part-II) and directed by Engineer-in-Charge.

18/19 mm thick MDF board as in shutters/shelves etc exterior grade prelaminated one side with decorative choice lamination and other side balancing white lamination fixed to frame work with screws etc., complete all as specified.

Box type steel windows (factory made) outer frame made out ERW tube 'P' section 65X45X25 mm and shutter of ERW tube 'P' section 50mmX35mmX20mm openable (double shutter) with glazed shutter on external side and gauzed shutter on internal side including steel pintel hinges steel handle 100 mm long mild steel tower bolt 02 Nos on each shutter stopper of 'Z' section and its locking arrangement and mild steel hook and eyes with & including sash bars dovetailed or welded ready for glass or wire gauge complete all as specified and shown on drgs No CEPZTD-324/07 Sh 1/3 to 3/3 Note:- The quoted rate a shall also include:- (i). One shop coat of zinc chromate primer on all exposed surface and one coat of tar on the ends of steel surface in contact with bricks / concrte surface. (ii) 4 Nos MS steel lugs made of 20X5 mm Iron flat 200 mm long. (iii) PCC block for embedding lugs.

Description all as per item No-28 above but in ventilators

Mild steel work conforming to Fe-290 (Gde E-165) as in grills, gratings etc. with ends of bars shouldered and/ or rivetted or forged into spikes; framed guard bars, and similar works, complete all as specified.

3mm thick sheet glass ordinary quality and glazing oil putty in square nexe 0.5 sqm, complete all as specified.

Galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tank or galvanised wire staple, complete all as specified.

Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed 300mm long, complete all as specified.

150 mm long extruded Aluminium handles, fabricated type, anodised complete all as specified.

75 mm long extruded Aluminium handles, fabricated type, anodised complete all as specified.

150mm Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified.

75mm Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified.

Floor door stopper 150mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, complete all as specified.

100mm long Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws, complete all as specified.

375mm, MS ordinary halical or rat tail rod pattern springs including roller and roller plate, complete all as specified.

Dismantling floor, hearth, or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Non skid ceramic coloured tiles 7 to 8mm thick ( Square or rectangular) area of each tile exeeding 0.06 Sqm but not exceeding 0.11 sqm as in floors laid over & including 15 mm thick screed bed in CM 1:4, set and jointed in neat cement slurry and pointed with white or coloured cement to match the shade of floor, complete all as specified.

Glazed ceramic plain / printed tile 300x450x6 to 7 mm thick on vertical surface as in Dado. Skirting etc (coloured tile) fixed over & including 15 mm thick plasteres in CM 1:4 set and jointed with neat cement slurry and printed with white cement to match the tiles, complete all as specified.

Machine cut kota stone slab flooring 18mm to 20mm thick, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing with mirror cut polish and including 100mm wide marble pati/border where required over and including screed bed or bedding layer 15mm thick in cement mortar (1:6), complete all as specified and directed by Engineer-in-Charge.

Description all as per item No-44 above but on vertical surfaces such as skirtings / dados.

110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including dismantling of old unserviceable pipes complete all as specified.

110 mm bore PVC (SWR) bends provided with access door any radius, complete all as specified.

100 mm dia Stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays. Including bolts and nuts and securing ends of stays to wall or roof, complete all as specified.

PVC 'P' or 'S' traps of 110 mm dia includind dismantiling of old traps, complete all as specified.

75 mm dia PVC (SWR) floor trap plain with grating including jointing with solvent cement, complete all as specified.

PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement, complete all as specified.

Taking down or up GI tubing and connection 15 mm bore complete all as specified.

Steel water tubing of 15 mm bore ‘medium grade’ galvanized with all fittings like socket, union, elbow, bend, tees etc fixed to walls and ceilings or laid in floors, complete all as specified.

Refixing old steel water tubing of 15mm bore and connections in new or old position fixed to walls, ceilings and floors etc. including fittings as requiered, including cleaning of old tubing complete all as specified.

Taking down or up GI tubing and connection 20 mm bore complete all as specified.

Steel water tubing of 20 mm bore ‘medium grade’ galvanized with all fittings like socket, union, elbow, bend, tees etc fixed to walls and ceilings or laid in floors, complete all as specified.

Refixing old steel water tubing of 20mm bore and connections in new or old position fixed to walls, ceilings and floors etc. including fittings as requiered, including cleaning of old tubing complete all as specified.

Cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings steps, cills, sunshades, shelves, lintels etc; and cutting cheses for concealed water tubing or concealed conduit wiring etc. and making good, cutting n.exc 10cm girth in brick work, complete all as specified.

15 mm dia bib tap, cast brass Chromium plated fancy type screwed for iron pipes with crutch or butterfly handle fixed in repairs, complete all as specified.

Chromium plated angular stop cock, cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe of size 15mm dia bore fixed in repairs, complete, all as specified.

Wash hand basin mixer of brass chromium plated single lever for bore of pipe 15 mm fixed in repairs, complete, all as specified.

Ovel shape Vitreous china WHB White, size 450 x 300mm including fixing on RCC slab supported on half brick wall finished with green marble and 32mm bore chromium plated waste coupling, waste pipe of 32mm dia PVC connection pipe 450mm long with brass nuts on both sides fixed in repairs, complete all as specified and directed. ( Note: Slab & Marble will be mearured seperately)

PVC valve less symphonic action type flushing cistern 10ltr capacity , low level white with inlet ball valve float and handle including brackets, 32mm dia PVC flush pipe 90/75mm long fixed in repair, complete all as specified and directed.

Vitreous china wash down water closet pan (pedestal pattern), white (excluding, flushing cistern and flush pipe) with & including white seat cover, fixing nut bolts, connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe etc fixed in repair, complete all as specified.

CP brass jet spray with flexible pipe not.less than 90 cm long fixed to EWC suitable for 15mm bore fixed in repairs, complete all as specified and as directed.

CP brass toilet paper holder fixed in repair, complete all as specified and directed.

Tubular towel rail, 20mm dia D type 60cm long between flanges of brass chromium plated, complete all as specified.

Soap dish, vitreous china white approximate size 169 x169 x 90 mm fixed to plugs with chromium plated brass screws, complete all as specified.

100mm dia stainless steel grating fixed in position, complete all as specified.

PVC connection 15mm size with PTMT nuts on both ends of length 450mm fixed in repair, complete all as specified.

CP brass shower rose with or without swivel joints, 125 mm size including fixing to steel pipe or union, complete all as specified.

Glass shelf 45cm long 100mm width With CP pipe railing fancy type fixed in repairs, complete all as specified.

Demolition of cement concrete as in sunkun floor of toilet/bathroom as directed by Engineer-In-Charge.

PCC type B1, 1:2:4 using 20 mm graded crushed stone aggregate as in sunkun floor or mass concrete, complete all as specified.

Cutting holes in brick work built in cement mortar for inserting hold fast or for passing pipe throug wall and making good dismantled portion in cement mortar 1:3 or cement concret 1:2:4 type B-1 completed all as specified depth of embeded portion of hold fast from face exe half brick but n.exe one brick, complete all as specified.

18/19mm thick Prelaminated particle, board, exterior grade, prelaminated one side with decorative choice laminations & other side balancing white lamination, fixed with screws to timber frame work, complete all as specified and as directed.

Extra over item of block board or veneered particle board for external teak wood lipping, 6mm thick, fixed with nails, complete all as specified.

Plain cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregate in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs and as in benching and similar work including necessary form work, complete all as specified.

Supply only Liquid water proofing liquid admixture Dr pidiproof, complete all as specified.

Two coats of synthetic enamel paint over a coat of pink primer on new plywood surface of any description, not otherwise described over 10 cm width or girth, including cleaning and dusting complete, all as specified and directed.

Applying two coats of synthetic enamel paint over a coat of red oxide primer to new or previously untreated steel surfaces over 10cm width or girth including preparation of surfaces, complete all as specified and as directed.

Preparation of old painted wooden or wood based surfaces of any description not otherwise described, over 10cm width or girth including knotting and stopping as required and applying one coat of synthetic enamel paint, complete all as specified.

Preparation of old painted steel surfaces of any description not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint in single shade, complete all as specified.

Demolition of PCC in ground floor and paving nexe 15 cm thickness including tiles (Above or below ground level) and removing all the demolished material outside cantt area, complete all as specified.

Demolition of brick or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work, complete all as specified and directed.

Brick work with subclass `B’ bricks straight or curved on plan exe 6.00mm mean radius in cm 1:6, complete all as specified.

Description all as per item No.87.00 above, but except bricks, complete all as specified and directed.

Brick work with sub class ‘B’ bricks straight or curved on plan to any radius in half brick thick wall built in cement mortar 1:4, complete all as specified.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position (Cleaning repairing, etc. measured separately), complete all as specified.

500 ltr capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) and fixed in position, all as specified in SSR Part-I complete all as specified including taking down of old unsv tank of any description.

20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed complete all as specified.

20mm dia Ball brass valves, high pressure, with polyethylene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified.

Dismantling asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified.

Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified. Make : JSW Colour or equivalent make as approved by GE.

Pre- painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified. Make : JSW Colour or equivalent make as specified in apeendix of list of make as approved by GE.

GI snap grid frame work (Grid size 605cm x 605cm) for false ceiling consisting of main runner 'T' of size 24mm x 32mm and 0.3mm thick , Secondary runner 'T' of size 24mmx25mm and 0.3mm thick, GI angle 24mmx24mm and 0.4mm thick, bottom exposed capping of width 24 mm of all T-sections shall be of 0.25mm thick PPGI, hot dipped galvanised steel with zink coating not less than 120gm / Sqm, ceiling grid system duly suspended by 4mm dia GI wire hanging from existing purlins /roof slab with butterfly clips including Gypsum ceiling tiles of size 595 x 595 x 9 mm laminated with 0.07 mm thick polyvinyl film on the face side and 10 micron metalized polyester film on the back side fixed on GI snap grid including taking down of old unsv materials, complete all as specified and directed by Engr-in- Chage. Make: Gyproc Make : JSW Colour or equivalent make as specified in apeendix of list of make as approved by GE.

RCC nominal mix 1:2:4, type, B-1 (using 20mm graded crushed stone aggregate), as in slab supported on walls, beams, column etc for kitchen/ bathroom counter for WHB, complete all as specified.

Form work to soffits of suspended slab such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick for rough finished surfaces of concrete, complete all as specified and directed.

TMT steel bars 10mm dia and above as in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with MS wire (annealed not less than 0.9mm dia), complete all as specified and directed.

25mm dia galvanized conduit pipe exterior best quality drapery rod fancy type (engraved rods) fixed in position of pelmet box, complete all as specified and directed.

25mm dia curtain rod brackets / end pieces fancy type fixed to wall with screws and PVC rawl plug complete all as specified.

PVC (SWR) bends any radius 100mm bore fixed, complete all as specified.

E&M PORTION:- Taking down carefully unsv aluminium / copper conductor point wiring (light, fan, light socket, power socket) complete fitting such as swithes, sockets, lamp holder, utility light fitting, fan regulator etc and removing materials from sites and making good distrubed surface of walls and roofs complete all as specified and as directed.

Taking down carefully sub main wiring of any type and making good distrubed surface of walls and roofs to match the existing surface, complete all as specified and as directed.

Taking down carefully unsv main switch / DBs alongwith MCBs / wooden board / connected fittings & fixtures any type and making good distrubed surface of walls and roofs to match the existing surface, complete all as specified and as directed. Note:-Old serviceable switches & MCB shall be taken on charge by the MES for reuse and unsv fittings shall be credited to the contractor.

Point wiring with 1.5 Sqmm single core multi stranded copper conductor FRLS PVC insulated and unsheathed heavy duty cable in colour code including contineous earth wire with cable of size 1.5 sqmm copper conductor flexible FRLS insulated drawn in and including concealed PVC rigid conduit / surface PVC casing caping medium grade ISI marked terminated into CI/pressed steel terminal boxes including 3.00mm thick hylam brand IS-2036 marked, laminated sheet cover for mounting switches, sockets, fan regulators etc complete all as specified and as directed for the following :-

One light/fan point controlled by one, one way switch 6 Amp complete all as specified.

One 3 pin socket outlet 6 amp on same board complete all as specified.

One 3 pin socket outlet 6 amp independent board, complete all as specified.

Description all as per srl item No 107 here in before but for one 3 pin socket outlet 16 Amp independent with cable of size 2.5 Sqmm for point wiring and 2.5 sqmm as in continuous earth wire.

Switch piano flush type 6 Amp single pole one way, (ISI marked), complete all as specified.

Socket outlet, 3 pin 6 Amp flush type universal, complete all as specifed.

Switch socket multipurpose combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal,complete all as specifed.

Ceiling rose (ISI Marked) 3 Phase PVC/poly carbonate, insulated body, compete all as specified.

Fan regulator stepped type (electronic ) flush type for 1200/1400mm sweep AC ceiling fan, complete all as specified. .

LED tube light fitting box type for LED 1 x 20W tube dod with end cap made out of CRCA sheet powder coated complete with hosing with all accessories pre wired and making connection with three core copper flexible cable of size 23/0.0076 from ceiling rose to PVC connection to light fitting with& including retrofit T8 Polycarbonate / Glass Tube1 x 20 W LED tube rod 4 feet long complete all as specified and directed. Make:-C&S Cat Part No:LTDC01220WLED/WD or Equivalent cat part of make as specified in Appx 'F' here in after. Note :- The LED batten and LED tube rod shall be of same make.

Lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings, complete all as specified and directed.

LED lamp 7W B-22 holder base with polycarbonate body, complete all as specified. Make:- C&S Cat Part No-LTHPLEDLAMP7W/B22 or Equivalent cat part of make as specified in Appx 'F' here in after.

Supply and laying or fixing or passing through pipe 1100 volts grade heavy duty electric cable with XLPE insulated screened PVC bedded aluminium stranded conductor served with inner sheathing of PVC tape armoured with galvanised steel wire or tape and over all PVC sheathed of size 16 Sqmm x 2 core, complete all as specified.

Sub main wiring with single core cable 2x 6 sq mm FRLS insulated unsheathed stranded copper conductor cable 1100 Volts grade including 20mm cancealed PVC rigid conduit / surface PVC casing caping medium grade alongwith 1x 4 Sq mm FRLS insulated unsheathed copper conductor cable as earth wire connected with main earth dolly including chesing, cutting & making good to match with the existing surface with & including taking down old unsv sub main wiring of any type, complete all as specified and directed. Note:-2 wire of 6sqmm,1 wire 4sqmm and one run of pvc conduit shall be measured as one unit.

Sheet metal enclosure factory made (Double door) for DBs, single pole and neutral, 240 volts, 8 way with 200Amps rated bus bar fixed on walls, including connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning with & including taking down old unsv DBs complete all as specified. Make:- INDIASIAN cat part No-811807 or Equivalent cat part of make as specified in Appx 'F' here in after.

MCB single pole and neutral 32 amps 240 volts 10 KA 'C' series all as specified. Make:- INDIASIAN cat part No-811151 or Equivalent cat part of make as specified in Appx 'F' here in after.

MCB single pole 6 to 32 amps 240 volts 10 KA 'C' series all as specified. Make:- INDIASIAN cat part No-811122 to 811129 or Equivalent cat part of make as specified in Appx 'F' here in after.

Earthing complete with galvanised mild steel earth plate electrode of size 600x600x6mm thick burried directly in ground earth (in vertical) earth pit not less than 2.25 mtr deep below normal ground level with top edge of the earth plate not less than 1.5 mtr below ground level connected to galvanised iron or earth lead wire 4mm dia (8 SWG) by means of nut, bolt, check nuts and washer of galvanised ironincluding PCC pit in PCC 1:2:4 type B-1 pre-cast RCC cover slab using reinfocement with XPM weighing not less than 1.87 kg/Sqm with suitable handle made of 12mm round bar, including necessary excavation and earth work in any type of soil, 20mm dia medium grade galvanised steel tube for watering with one end fixed with cast iron funnel and wire mesh, 15mm dia bore light grade galvanised steel tubing upto 7.5 m length for drawing earth lead wire protection pipe, common salt, charcoal, etc complete all as shown in electrical plate No 3 of SSR Part-I and testing on completion. Note:- Rate for earth lead wire & protection pipe upto 7.5mtr length are inclussive in this item & no extra payment shall be admissible for the same.

LED street light 30 Watt 5700K made up of powder coated pressure die cast aluminium high power LED street light with heat resistant toughened glass with lens LED as lighting source and lens embedded PC cover having TOP opening seperate driver compartment with IP65 protection and impact resistance of IK07 complete with hosing with all accessories pre wired with and making connection with three core copper flexible cable of suitable size to light fitting complete all as specified and directed. Make:-C&S Cat Part No:-LTESS12X2.5HPLED/LS or Equivalent cat part of make as specified in Appx 'F' here in after.

40mm dia GI pipe bracket of 1.2 mtr made to shape as required fixed on wall or pole with FI clamp of required shap & size FI 40x4mm, drilling & fixing with nut, bolts, washers including painting with two coats of aluminium paints over a coat of transformer, complete all as specified and directed.

Excavation in trenches in any type of soil not exceeding 1.5m wide and n.exc 1.5 mtr in depth for laying of under ground electric cable and getting out complete all as specified.

Returning filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick in any type of soil complete all as specified.

Removing excavated surplus materials to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point, complete all as specified.

Dry river sand cushioning to UG cable 8 cm thick before laying and 15cm thick after laying complete all as specified and directed. Note:- 1.Dry fine sand of best available quality shall be used. 2.Punned thickness shall be made and paid.

Supply and laying sub class `B` bricks laid dry flat transversely along the length of cable with width equal to the length of bricks over sand cushioning as protection cover of cable laid, complete all as specified and directed.

GI pipe light grade 40 mm bore for cable protection fixed on poles or laid in trenches, under floor, ducts, road crossing etc with fixing clamps, nuts bolts, washer of requrered size if required, complete all as specified.

Switch socket multipurpose combination 2 in 1, 2 pin & 3 pin, 6 Amp flush type universal,complete all as specifed.

M/S shakti steel industries

M/S K D Construction Co

Tawi Constructions

M/S Shesh Paul Gupta

Kanwal Nain Behl

M/S VIJAY KUMAR SHARMA