BARC/CSS/ET/12/2024-2025

Amount

Removing flat back urinals system/ EWC/AIWC carefully along with the cast iron/ceramic/plastic flushing cistern including all its accesseries, items including removing bracket screws & existing C.P. fittings & stacking the same as directed by the Engineer-in-charge

Removing hand wash basin carefully alongwith bottle trap ,stop cock, pillar tap,brackets & PVC connections carefully & stacking the the same as directed in Civil Maint.Stores at TSH/NBH as directed by the Engineer-in-charge.

Dismantling plain cement concrete manually/by mechanical means carefully without damaging adjacent structures including disposal of debris within 200M lead as per direction of Engineer in charge.

Dismantling of RCC works carefully manually without damaging adjacent structures excluding cutting of reinforcement including stacking of steel reinforcement bars and disposal of unserviceable materials within 100M lead as per direction of Engineer in charge.

Dismantling brick work in Cement mortar carefully without damaging adjacent structures including stacking of materials and dispoal of unserviceable materials within 100 m lead as per direction of Engineer-in-charge

DISMANTLING DOORS, WINDOWS & CLEAR STOREY WINDOWS (Steel or wood or aluminium) including shutters & chowkhats (frames), Architraves, holdfasts etc. complete and stacking within 100 mts. lead. as directed by the Engineer-in-charge

of area below 3 sq. m

of area beyond 3 sq. m

Dismantling G.I pipes of all diameter external work including excavation and refilling trenches after taking out pipes manually / by mechanical means including stacking of pipes within 100 m lead as directed by the Engineer-in-charge

Dismantling flushing cistern of any size including stacking of useful materials near the site and disposal of unserviceable materials within 100 m lead including cost of labour , scaffolding etc. all complete as directed by EIC.

DISMANTLING OLD PLASTER OR SKIRTING carefully, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 100M lead as directed by the Engineer-in-charge.

Lead charges for lead Exceeding 4 KM not exceeding 5 KM, by mechanical transport including loading,unloading, stacking / levelling etc. etc. as directed by the Engineer-in-charge Note: The rates in respect of this Item is applicable for NET Quantities arrived at after making deduction for voids @ 20% in respect of Soil and 30% in respect of Debris from corresponding TRUCK Measurement.

Debris beyond 4 Km but up to and including 5 km

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 100 m lead For thickness of tiles above 10 mm and up to 25 mm

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 100 m lead For thickness of tiles above 25 mm and up to 40 mm

Providing 15 mm thick plastering using Ready mix internal plastering compound of approved make for internal faces of brickwork / concrete surfaces including preparation of the surface, curing, cleaning, scaffolding complete all as per specifications and as directed at site by the Engineer-in-charge

Providing structural repairs in old damaged concrete structures / surfaces with approved Polymer with following operations 1) Removal of loose/Spalled or damaged concrete by chipping and cleaning the concrete surface and reinforcement steel with wire brush and with water 2) Cleaning the re bars with Acetone for complete rust removal and washing with water to make the surface clean. 3) Applying protective coat / bond coat using polymer and cement in the proportion of 1; 1.5 (1 part of polymer and 1.5 parts of cement in synthetic enamal paint like consistancy with brush 4) Reinstate the area with polymer modified mortar in layers of maximum 20 mm with the proportion of Cement 50 Kg : washed and dried river sand 87.50 kg ; silica sand 37.50 Kg. mixed with 10 litres of Polymer (or 1 Kg cement : 1.75 kg washed and dried river sand ; 0.75 Kg silica sand : 200 ml polymer)5) If thickness of repair exceeds 20mm , after every 20 mm thick repair, bond coat as per 2 above to be applied and further thick of repair to be continued for each layer. This work is inclusive of all materials, labour, complete all as directed at site using approved polymer suitable for structural repair shall be used), Note : Scaffolding will be paid seperately under relevant item.

Providing and applying white cement based wall putty of approved make over concrete or Plastered surface up to 3 mm thick to get uniform surface free from undulation including cleaning complete all as directed by the Engineer-in-charge

Providing and applying wall painting two coats on new work with premium plastic emulsion paint of approved brand to give an even shade, including a coat of approved cement primer, including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge

Prviding and fixing PVC paintable wall paper , a thick white wallcovering that has a raised design that gives it dimension and texture, with a minimum thickness of 3 mm. The wall paper should be able to be re painted atleast 3 times.

Providing , applying one coat of acrylic based textured plaster of approved make with the finish as directed with average thickness of 2.50 mm and finished with 2 coats of high performance coating of approved shade including preparation of the surfaces, complete. as per specifications and as directed by the Engineer-in-charge.

Providing and fixing in position suspended seamless false ceiling system using 12.50 mm thick moisture resistant plain gypsum board suspended ceiling, which includes CRP surface ribbed perimeter channels (having one flange of 20mm and another flange of 30mm and a web of 27mm) along the perimeter of ceiling, screw fixed to brick wall/partition with the help of nylon sleeves and screws, at 610mm centres. Then suspending CRP surface ribbed intermediate channels of size 45mm (with two flanges of 15mm each) from the soffit at 1220mm centres with CRP surface ribbed ceiling angle of width 25mmx10mm fixed to soffit with GI cleat and steel expansion fasteners. CRP surface ribbed Ceiling section of having web of 51.5mm and two flanges of 26mm each with lips of 10.5mm are then fixed to the intermediate channel with the help of connecting clip and in direction perpendicular to the channel at 457.5mm centres. Single layer of 12.5mm tapered edge (conforming to BS 1230 part 1) is then screw fixed to ceiling section with 25mm drywall screws at 230mm centres. Screw fixing is done mechanically either with screw driver or drilling machine with suitable attachment. Finally square and tapered edges of the boards are to be jointed and finished so as to have a flush look which includes filling and finishing with Gyproc jointing compound, Gyproc joint paper tape and two coats of drywall top coat. Note : Tentative / suggested make for guidance of bidder(s) : M/s. GYPROC.MR of M/s .Saint Gobain make

Providing and fixing Luxalon Aluminium Cell Ceiling manufactured by M/s Hunter Douglas India Pvt. Ltd., of approved colour consisting of Main Runner, Cross Runner, Upper Sections, Lower Sections all of U-Shaped Profiles 10mm wide x 50mm deep x 0.4mm thick with inwardly returned edges of 2.5mm. Coil Coated on a Continuous Paint Line, Double baked and Roll formed from enameled Corrosion Resistance Aluminium Alloy AA5050 (Al.Mg) for higher strength and good Roll Forming characteristics. The Main Runner shall be fixed at a distance of 1.2mtrs c/c and shall be suspended by means of G.I. Suspension Rod 4mm diameter and a Galvanized Suspension Spring Clip at a distance of 1.2mtr c/c. The Cross-Runner shall be fixed to the Main Runner at a distance 0.6mtrs c/c., with a self-locking device. The Upper Section and Lower section shall be fixed to the Main Runner and Cross Runner in a form of a Cell Structure of module 100 mm x 100 mm with a self-locking device. Paint Finish: - Aluminium Main Runners, Cross Runners Upper Section, Lower Section of U-Shaped Profiles shall be chromatised for maximum bond between metal and paint; enamelled twice under high temperature one side with full primer and Finish Coat, the other side (inner side) with a Primer Coating and Skin Coat on a Continuous Paint Line. Mode of Measurements: - Measurements shall be wall to wall without deductions for lights, diffusers, columns etc. Module: 100mm x 100mm

Providing and fixing Luxalon® 300C un-perforated Aluminium panel ceiling manufactured by of approved colour consisting of panel 300mm wide x 30 mm deep x 0.7mm thick with bevel edge, panel length up to 6 mtr, Coil Coated on a Continuous Paint Line suitable for application, Double baked and roll formed from enamelled corrosion resistance aluminium alloy AA 3005 (Al. Mg) for higher strength and good roll forming characteristics. The Panels shall abut each other with a narrow V grove. Panel shall be clipped to a baked enamelled aluminium panel carrier of 41.5mm wide x 62mm deep x 0.95mm thick in standard length of 5 mtr made of doubled baked black enamelled aluminium alloy AA 5050 (Al. Mg) with cut outs to hold the panels in a module of 300mm closed at a distance 1.00 mtr. Panel carrier shall be suspended by means of G.I. slotted angle 2 mm thick at a distance suitable as per site conditions.

Providing and fixing Glazed VITRIFIED floor tiles of approved make in different sizes conforming to IS 15622 in all colours and shades in Glossy or Matt or satin finish laid over a bed of minimum 20 mm thick bed of cement mortar 1:4 (using Crushed sand) and jointing with grey cement slurry including grouting with the joints with white cement based Tile Grout of approved make and matching shade complete as per patterns, drawings and specifications complete as directed by the Engineer-in-charge

Using Tiles of size above 900 x 900 mm and up to 1200 x 1200 mm

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS 15622 of approved make. shade and colour of size ranging from 300 - 600 mm long and 300 mm - 600 mm wide and thickness not less than 6 mm as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (using crushed sand), setting the tiles in cement slurry and pointing the joints with matching colour Tile grout of approved make of matching shade including using PVC tile trim in the exposed corners, complete as per drawings, patterns and specifications complete as directed by the Engineer-in-charge.

Providing and fixing 1st quality ceramic glazed floor tiles of minimum 300 - 600 mm long and 300 - 600 mm wide and thickness not less than 6 mm conforming to IS 15622 of approved make in all colours and shades as approved by Engineer-in-charge over a bed of 20 mm thick bed of cement mortar 1:4 (using crushed sand) and jointing with grey cement slurry including pointing with white cement based Tile grout of approved make and matching shade complete as per patterns, drawings and specifications complete as directed by the Enginner-in-charge

Providing and laying Anti-skid vitrified floor tiles,in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), cladding fixed with approved adhessive, including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm / 300mm x 300 mm

Providing, supplying and laying pre polished granite slab flooring / dado / Wall cladding with 15-17 mm thick granite slabs over 20 mm thick base cement mortar 1:4 (using crushed sand) laid and placed with grey cement slurry including filling the joints with matching white cement based tile grout complete all as per specifications and drawings.

Using approved black shade

Using approved shades other than black

Extra for providing edge moulding upto 17 mm thick Granite Slab counters, Vanitis etc. including machine polishing to edge to give high gloss finish et. Complete as per design approved by Engineer-in-charge.

Granite work

Providing and laying 8 mm x 8 mm Square Brass strip for inlay in flooring as per approved pattern, rate includes machine cut precise groove for fixing brass strip and Brass strip should be fixed in floor with required chemical. The quoted rate shall also include all tools & tackles, consumables, Epoxy etc., transportation, and making area good after fixing bass strip, all complete as directed by Engineer-in-Charge.

Providing and laying 10 mm x 10 mm Square Brass strip for inlay in flooring as per approved pattern, rate includes machine cut precise groove for fixing brass strip and Brass strip should be fixed in floor with required chemical. The quoted rate shall also include all tools & tackles, consumables, Epoxy etc., transportation, and making area good after fixing bass strip, all complete as directed by Engineer-in-Charge.

Providing and fixing 35 mm thick flush door shutters conforming to IS : 2202 non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with internal teak wood lipping 25mm wide and fixing with 4 Nos of 125 mm long Stainless steel Hinges with S.S. wood screws complete.

Providing and fixing decorative high pressure 1.5 mm thick laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS:2046 Type S including cost of adhesive, labour etc. complete as directed

Providing wood work in frames of doors, windows, clear story openings and other frames, wrought framed and fixed in position of required size and shape including sawing, jointing,making rebates for shutters, making grooves as shown in the drawings, finishing the surfaces to the required finish all as per specifications and drawings including necessary MS hold fasts 40 mm X 3 mm thick, 200 mm long / with coach screws including protective painting to the suface that will come in contact with walls, joining materials, labour etc. complete all as per specifications and as directed by the Engineer-in-charge

Second class teak wood

Providing and fixing 25 mm thick Colour PVC Integral Sheet door shutters flush door of approved colour, of approved make or equivalent, design, colour and fixing with 4 Nos 100 mm (ISI marked) stainless steel hinges, Fixing of Stoppers, tower bolts, baby latch, aldrop, handles etc.wherever required with S.S. screws (Stopper, Tower bolt, Baby latch, Aldrop, Handels etc Shall be supplied by department) etc. complete as per specifications and as directed by Engineer-in-charge. Note : The door should satisy the following technical parameters as under: 1. Density : 0.475 to 0.55 g/cc, 2. Hardness (Shore 'D'): min. 55, 3. Water absorption : max. 1 %, 4. Tensile strength : min. 13 MPa, 5. Elongation : min. 15 %, 6. Flextural Strength min. 30 MPa, 7. Compressive Strength at 10% Deformation : min. 3 MPa, 8. Vicat Softening Temperature: more than 75 Deg Celcius 9. Flammability: classification B : S3 : D0 (to be tested as per NF EN 13501-1 standard)

Providing and fixing anodized aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / Z sections and other sections of approved make conforming to IS 733 and IS 1285 fixed with rawl plugs and screws or with fixing clips or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC / neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically whereever required including cleat angle, aluminium snap beading for glazing / panelling, C.P brass / stainless screws all complete as per drawings and and directions of Engineer-in-charge including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required filling the gaps using silicon grout sealent etc. (fittings glazing and panelling shall be paid for separately) NOTE : 1) The rates for aluminium is inclusive of all fastners required for fabrication and fixing in the walls. 2) All joints shall be of mittered Joints 3) A long M.S rod threaded at both ends to be provided in all aluminium door shutters in Top & bottom Horizontal members internally connecting Vertical members and fixed with M.S washers & nuts. 4) Only Aluminium members alone shall be measured and paid for.

Anodised Aluminium sections (Minimum anodizing thickness of 15 micron)

Extra for colour anodizing

Providng and fixing Aluminium Grill 10 mm thick "DECO GRILLE" make Model No. DG- 202 in natural Silver anodising of min 15 Micronswith a opening size of 60mm x 45mm and Minimum weight of 4.12 Kg/ Sq.M including providing anfd fixing Suitable 'F' / 'H' section outer frame and mullion fixing with screws complete all as per specifications and as directed at site by the Engineer-in-charge .Aluminium alloy shall be of 6063-T6 with yield strength of minimum 6.5 kg/ sq.mm.

Extra for providing Aluminium Grill 10 mm thick with colour anodised by the manufacturer (Champagne, black, Bronze, Gold colours) complete all as per specifications and as directed at site by the Engineer-in-charge

Providing and fixing glazing in aluminium doors, window, ventilator shutters and partitions etc with PVC / Neoprene gasket etc. complete as per the architectural drawings and directions of the Engineer-in-charge (Cost of snap beading shall be paid in basic item)

With clear float glass panes of 5.00 mm thickness

Providing and fixing glazing in aluminium doors, window, ventilator shutters and partitions etc with PVC / Neoprene gasket etc. complete as per the architectural drawings and directions of the Engineer-in-charge (Cost of snap beading shall be paid in basic item)

With frosted glass panes of 5.00 mm thickness

Providing and fixing approved Quality and shape Star Locks cum Handle of MIDIN or approved equivalent make for Sliding shutters.

Providing and fixing Approved Quality Stain less steel Body Roller wheels of approved make for Sliding shutters

Providing and fixing mortise lock KEY in outer side and in inside with a pair of lever SS 316 Grade Mortise Lock, Mortise handle, Pin cylinder Lock of approved make all as per specifications and drawings complete. Sample to be approved by the EIC.

Providing and fixing stainless steel tower bolts of size 150 X 12 mm of approved make with necessary screws etc.all as per specifications and as per drawings.

Providing and fixing anodised aluminium baby latch of size 75 X 12 mm ISI marked of approved make transparent or dyed to requried colour or shade with necessary screws etc.

Providing and fixing pair of stainless steel "C" type door handles 10 mm dia, 250 mm long SS 304 grade solid rod , of specified size in steel doors/ wooden doors including screws / bolts etc. all as per drawings and specifications complete.

Providing and fixing aluminium hanging heavy quality floor door stopper ISI marked with twin rubber stoppers, anodised transparent or dyed to required. colour or shade with necessary screws etc. complete.

Providing , supplying and fixing bright Finished / Stainless steel Finish Brass aldrops of size 250 X 16 mm and approved make and design including CP Brass / SS screws and Bolting from rear side including required no of 'Kuntis' etc complete all as directed by the Project Engineer.( Sample to be approved by the Project Engineer)

Providing and fixing 25 mm S.S curtain rods of 1.25 mm thick with two brass brackets fixed with brass screws and wooden plugs etc. wherever necessary complete

Providing and fixing hand rail using 304 grade Stainless Steel pipes of approved size and make and quality by welding, mirror / matt polishing, fixing at site etc. for balcony railing & staircases railing including special sections as per drawings, specifications. complete as directed by the Engineer-in-charge

Providing & fixing Wall-hung basin with integrated semipedestal of aprox. size 460 x 470 x 380 mm (Roca,Parryware, Hindware or any other approved make & colour ) drilling holes in the walls & making good the damages etc. all complete & as directed by Engineer / Architect.

Providing and fixing 6 mm thick mirrors of size 600 x 450 mm of approved make with bevelled edges complete with 6 mm thick asbestos sheet back ground fixed to walls with C.P. brass screws and concealed washers complete. all as per specifications and as directed by the Engineer-in-charge .

Providing and fixing wall mixer 3-in-1 system with provision for both telephonic shower and overhead shower, including 115 mm long bend pipe, connecting legs and wall flange (without hand and overhead shower) complete set of approved make& model including removal of old mixersystem and depositing at unit stores etc. as directed by EIC

Providing and Fixing CP brass 100 mm dia shower rose with Shower arm of Specified make as per specifications and as directed by Engineer-in-charge complete

Providing and fixing in position approved white vitreous china pedestal typeOne piece WC with dual outlet. P-Trap or S-Trap 305 mm. (Roca,Parryware, Hindware or any other approved make & colour ) with white solid plastic seat and lid with all fittings and fixtures including cutting and making good the same, making inlet and outlet connections etc. complete including fittings / connectors ;complete as directed

Appx Size 360 x 675 x 760

Providing and fixing PVC low level / high level flushing cistern 10 litre capacity of approved make in white colour with flush pipe with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures etc. complete as per specifications and as directed by the Engineer-in-charge.

Providing and fixing 15 mm C.P brass 2 in 1 bib cock and Angle cock combination of Heavy Quality of approved make as per specifications and as directed by the Engineer-in-charge

Providing and fixing stainless steel TOILET PAPER HOLDER recessed type of approved make and type with S.S screws as directed by the Engineer-in-charge complete.

Providing and fixing C.P brass towel rail/rod of approved make 600 mm long complete fixed to walls with 30 mm CP brass screws with concealed fitting arrangement/ brackets all as directed by the Engineer-in-charge.

Providing and fixing C.P brass Angle cock of heavy quality of specified / approved make, for wash basin inlet / flush cistern etc. as per specifications and as directed by the Engineer-in-charge

15 mm n.b CP brass Angle cock of approved make

Providing and fixing C.P brass concealed stop cock of Heavy Quality of specified / approved make as per specifications and as directed by the Engineer-in-charge

15 mm n.b CP brass concealed stop cock of approved make

Providing and fixing heavy quality stainless steel / C.P brass grating of approved equvalent make as specified for floor traps / nahani traps all as directed by the Engineer-in-charge

SS grating 125 mm dia

Providing and fixing heavy quality health faucet with 1.50 metres long flexible hose (hand shower) of approved make with wall brackets and type as per specifications and as directed by the Engineer-in-charge

Providing and fixing heavy quality CP brass bottle trap 31 / 32 mm of approved make single piece moulded with height of 270mm, effective length of tail pipe 260 mm from the centre of the waste coupling 77 mm breadth with 25 mm minimum water seal,of approved make for wash basins / urinal etc all as per specifications and directed by the Engineer in charge.

Providing, laying , jointing, fixing and testing heavy quality ( (ISI Marked C-Class) Galvanised Iron pipes and ISI marked fittings like, tees, elbows, bends, unions, nipples,reducers etc. as required for the work, including testing the pipes and fittings for 10.00 Kg / Sq.Cm hydralic pressure with a minimum period of two hours duration with clean water, including cutting , threading, jointing with hemp yarn, white lead, jointing teflon tape, chasing walls and making good by filling with concrete 1:3:6, complete all as per specifications and drawings, including two coats of anti corrosive bitumastic paint for all concealed lines / two coats of synthetic enamel paint for all exposed lines, all as directed by the Engineer-in-charge. Pipes with ISI marked 'C' -Class heavy quality pipes of approved make.

15 mm dia G.I pipe

20 mm dia G.I pipe

25 mm dia G.I pipe

50 mm dia G.I

Providing and fixing CHLORINATED PVC (CPVC) PIPES of approved make having thermal stability for hot & cold water supply (as ASTM Standard 2846 & SDR - 11 Grade) including all CPVC Plain & Brass threaded fittings, fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with CPVC Solvent cement & testing the joints complete all as per specifications, drawings and as directed by the Project Engineer.

15 mm outer dia CPVC pipe (External) / open

20 mm outer dia CPVC pipe (External) / open

Providing, supplying, fixing in position, under floors or in walls centrifugally cast iron pipes including required specials like bends, tees, 'Y' collars, cowl etc for soil, waste and ventilation pipes conforming to IS.3989 of approved make including cost of jointing with spun yarn and molten lead of specified quantity, caulking the joints, including testing of pipes, painting with primer, fixing at walls with necessary approved type of clamps and brackets complete all as per drawings and specifications and as directed at site.

75 mm dia centrifugally cast (spun) iron socketed pipe as per IS:3989 using 0.90 kg lead / joint

100 mm dia centrifugally cast (spun) iron socketed pipe as per IS:3989 using 1.00 kg lead / joint

150 mm dia centrifugally cast (spun) iron socketed pipe as per IS:3989 using 1.20 kg lead / joint

Providing & fixing in position heavy pattern screw down gun metal gate valve with handles and wheels of approved make including testing for 10Kg/cm2 pressure with clean and potable water with a minimum testing duration of two hours etc.as per specification and as directed by the Engineer-in-charge

Supply and installation / fixing on wall of photo with frame of approved design onPVC framing of required thickness and design as directed by the Engineer-In-Charge of the following sizes

230mm X 300mm

300mm X 450mm

450mm X 600mm

Supplying and installation at required location Premium quality designer Brass flower pot of approved make, Colour, Shade, finish and shape all as directed by the Engineer-in-charge.

Providing and fixing foldable drying racks for cloth drying of size : 37 x 75 x 12 cm made of SS 304 frame and 5 nos 25 mm dia pipe fixed on the wall with 04 nos 10 mm dia 100mm long anchor fastner

Providing and fixing Steel Pulley Type Ceiling Cloth Dryer, Size: 6ft with 6 bnos rods. Ceiling cloth hangers should be of premier quality with SS 304 hollow Rods of 25mm Dia 3mm thk for long lasting use with optimum space between individual pipes

Providing and fixing 3 mm thick veneer, approved make and shade fixed over suitable base like cement board in wall cladding etc. The quoted rate shall include all tools & tackles, consumables, nails & screws etc., transportation, labours , all complete as directed by Engineer-in-Charge.

Providing and fixing 12mm thk BWP marine on existing partition frame / wall / etc. with necessary hardware with 1mm laminate / veneer of approved shade / colour all complete as per architect's instructions & Detail Drawings and as directed by Engineer-in-Charge.

Providing and fixing 6mm thk BWP marine on existing partition frame / wall / etc. with necessary hardware with 1mm approved laminate / veneer of approved shade / colour all complete as per architect's instructions & Detail Drawings and as directed by Engineer-in-Charge.

Providing and fixing 18mm thk BWP marine ply on existing partition frame / wall / etc. with necessary hardware with 1mm laminate / veneer of approved shade / colour all complete as per architect's instructions & Detail Drawings and as directed by Engineer-in-Charge.

Providing Melamine polishing on wood work (one coat) as per manufacturers instructions, matt or glossy finish as specified including preparation of the surfaces, complete. as per specifications and as directed by the Engineer-in-charge

Providing and applying French spirit polishing One coatson old work including preparation of the surfaces, sand papering complete. as per specifications and as directed by the Engineer-in-charge

Supplying and injecting with approved quality chemical emulsion at the rates and concentrations as per IS 6313-2001 Part II, mixed with Keroscene and chemical and giving post Anti-termite treatment to wooden door and window frames of existing buildings as per manufacturers specifications or as specified and as directed by the Engineer-in-Charge. Work to be executed by approved agency and specified guarantee for 7 (Seven) years shall be furnished by the tenderer. Payment will be cleared only after submission of guarantee.

CARRYING OUT MANUAL MISC. CARPENTRY / PLUMBING JOBS like minor repairs, fixing fitting and fixtures etc. as and when required and as directed by the Engineer-in-charge Note: 1. Labours shall bring necessary carpentary / plumbing tools. 2) Payment shall be made as per the Log book duly approved by the Enginner in charge. 3) The log book shall consist of the day-to-day attendance of complaints/ work assigned and the time taken to attend each activity . The total time of 8 hrs. shall be considered as ONE manday. 4) Contrator shall arrange necessary Police Verification Certificate for the workers engaged for the work.

SKILLED CARPENTER (CARPENTRY WORKS) with valid Police Verification Certificate for entire contract period.

SKILLED PLUMBER (WATER & DRAINAGE WORKS) with valid Police Verification Certificate for entire contract period.

Supplying man power along with necessary pans, spades, shavels pickaxe, punjas, ropes, smallspecial spade raincoats etc. minimum two number of labour per day upto maximum any numberof labour as and when decided by Project Engineer to work for eight hours per day or monsoonperiod to carry out the cleaning of choked drains grating grills/hume pipes /footpath byremoving the dry leaves, silt etc. and also carry out seasonable departmental work allotted by Project Engineer from time to time.

Providing and fixing ceiling mounted Concelaed curtain track with all accessories like sliding knobs etc complete to hang the curtains (Curtains to be measured and paid seperately)

Providing, supplying and fixing fabric curtains of approved make including fabric and accessories necessary for fixing of curtain as per approved fixing arrangement. Fabricating curtains to required design, pattern, sizes etc as per approved design and approved Fabric 100% cotton of width around 142cm (56") complete all as directed by the Engineer in charge. Basic Rate of Fabric Rs 1000 / SqM

Providing and fixing cast iron nahani trap / floor trap of 100 mm inlet and 75 mm outlet, (weighing 5.80 Kg each), jointing with lead with the connection pipes, placing as per the drawings, embedding in cement concrete 1:2: 4 and making circular hole up to floor level using 110 mm O/D PVC pipes of 6 Kg / sq.cm pressure and fixing 1 No 125 mm dia C. P brass grating , complete all as specifications and drawings and as directed by the Engineer-in-charge

Electrical Wiring - Supply, Installation, Testing and commissioning of electrical wiring as per specification Elect-TSS-01

Primary AC&Geyser Power Point wiring with 4 Sqmm copper wire

Primary Power Point wiring with 2.5 Sqmm copper wire

Secondary Power point wiring with 2.5 Sqmm copper wire

Primary Switch board Point wiring with 1.5 Sqmm Copper wire

Secondary switchboard point wiring with 1.5 Sqmm Copper wire

Primary Light/fan point wiring with 1.5 Sqmm wiring

Secondary light point with 1.5 Sqmm wiring

LED Lighting Fixtures - Supply, installation, testing and Commissioning of following LED Lighting Fixtures with driver as per specification Elect-TSS-02

10W LED round Recess type Lighting Fixture with

LED lighting Strip 6.5W/M IP67 with driver for each 3m length

8W, Wall washer LED decorative Light

18W LED with driver metal body 100lm/W recess type lighting fixture

10W, 1000lm LED, Metal body 2ft batten type Mirror lighting fixture

30W LED 600mmX600mm lighting fixture

10W round type COB recess type lighting fixture

Electrical Fan - Supply, installtion, testing and commissioning of Ceiling and exhaust fan as per specification Elect-TSS-03

BLDC Ceiling Fan of 1200mm sweep with fan regulator

Exhaust fan 200mm plastic body with guard

M S modular Box with face plate and all accessories - Supply, installtion, testing and commissioning of M S modular Box with face plate and all accessories as per specification Elect-TSS-04

8 Module

6 Module

3 Module

2 Module

Electrical Switch and Socket - Supply, installtion, testing and commissioning of Switch and Socket as per specification Elect-TSS-05

6 Amp Electrical Switch

16 Amp Electrical Switch

6 Amp Electrical Socket

16 Amp Electrical Socket

AC Power Point - Supply, installtion, testing and commissioning of AC Power Point as per specification Elect-TSS-06

Metal box with 20A socket and plug

20A DP MCB with Metal Box

Data Point - Supply, installtion, testing and commissioning of Data Point as per specification Elect-TSS-07

Cat-6 cabling

Data outlet point with 2 Nos RJ45

Electrical Geyser /Water Heater - Supply, installtion, testing and commissioning of Electrical Geyser /Water Heater as per specification Elect-TSS-08

Electrical Gyeser /Water Heater with 3kW, 1Litre capacity

Metal box with 25A MCB, socket and plug

Door Bell system - Supply, installtion, testing and commissioning of Door bell system with , Occupancy indicator, wiring and 2 module switch as per specification Elect-TSS-09

Fire detector - Supply, installtion, testing and commissioning of Fire detector as per specification Elect-TSS-10

Electrical Key holder with Keytag - Supply, installtion, testing and commissioning of Electrical Key holder with Keytag and 1No+1NC as per specification Elect-TSS-11

16 WAY SPN DB - Supply, installtion, testing and commissioning of 12 WAY SPN DB Distribution board along with all accessories as per specification Elect-TSS-10

VTPN Distrbution board - Supply, installtion, testing and commissioning of VTPN DB with 160 A incomer MCCB and outgoing MCBs as per specification Elect-TSS-11

LT Power Cable - Supply, installtion, testing and commissioning of 1.1kV, XLPE insulated power cable as per as per specification Elect-TSS-12

1.1kV, 6 Sqmm, 3C Copper conductor LT TRS Flexible Cable

1.1kV, 50 Sqmm, 3.5C Aluminium conductor LT Cable

End Termination of LT Cable - Supply, installation, testing and commissioning of end termination of power cable as per specification Elect-TSS-13

End Termination of 3.5C Cable of size 50 Sqmm

End Termination of Cable of size 6 Sqmm

PVC Trunking 105X50mm with cover and separator - Supply, installation, testing and commissioning of Aluminium Trunking 105X50mm size with cover and separator as per specification Elect-TSS-14

PVC FR Conduit Pipe of 25mm dia - Supply, installation, testing and commissioning of PVC FR Conduit Pipe of 25mm dia as per specification Elect-TSS-15

Dismantling of existing electrical items :- Dismantling of existing electrical items in rooms and other places which are under renovation as per specification Elect-TSS-16

Split Air Conditioner : Supply ,installation, testing and commissioning of inverter type 1.5 TR Split type ACs including, copper tubing (liquid and gas line) , insulation of tubes, drain pipes and electrical cables as per specification.

M S Fabricated Item

G-TECH CONSTRUCTION & FABRICATORS

MARUTI ENTERPRISES

Renjin Construction