REPAIRS/REPLACEMENT OF RISING / DISTRIBUTION LINES GRAVITY MAINS, CONTROL VALVES SERVICE PIPES AND ALLIED MISC WORK AT ACC and S, CQA(V) and DAD UNDER GE (S) AHMEDNAGAR

Amount

Excavation in trenches n exc 1.50 m wide and n exc 1.50 m deep for foundation, laying of pipe, cables or for shafts, wells cesspits,man holes, sluice valves etc n exc 10 Sqm on plan and n exc 1.5m in depth and getting out in soft / loose soil complete all as specified and as directed.

All as per serial item No 1 but in hard /dense soil.

Returning, filling, in soil including spreading, levelling, watering and well ramming in layers n.exc. 25cm thick complete all as specified and as directed.

Removing excavated soil to distance n exc. 50 m and depositing where directed at a level n exc. 1.5 m above the starting point etc complete all as specified and as directed.

M&L for cutting the existing bituminous road / PCC Hard Standing upto 75cm in depth, 60cm in width and getting out excavated materials, making good the damaged portion after laying of pipes by returning, filling in including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick and PCC 1:2:4 type B1 using 20mm graded stone aggregate upto 30cm depth from top of the road all as specified and directed.

M&L for repairs / rectification of leakages of existing GI tubing 15mm bore, laid in trenches, floors or on wall, roof by replacing new fittings such as Union, Sockets, nipples, tees, elbows, reducers etc including threading, cutting, jointing, excavation and earthwork complete all as specified and as directed.

All as per serial item No 6 but for 20mm bore.

All as per serial item No 6 but for 25mm bore.

All as per serial item No 6 but for 40mm bore.

All as per serial item No 6 but for 50mm bore.

Taking up or down 15mm bore dia steel water tubing and connections etc complete all as specified and as directed.

All as per serial item No 11 but 20mm bore dia.

All as per serial item No 11 but 25mm bore dia.

All as per serial item No 11 but 40-50mm bore dia.

All as per serial item No 11 but 80 mm bore dia.

All as per serial item No 11 but 100 mm bore dia.

Refixing old steel tubing, 15mm bore dia, retrived from item No.11 and connections in new or old position including cleaning, removing Caulking and refixing with new GI fittings such as unions, sockets, nipples, tees, elbows, reducers etc on wall, floors, in trench etc complete all as specified and as directed.

All as per serial item No 17 but 20mm bore dia retrived from item no.12

All as per serial item No 17 but 25mm bore dia retrived from item no.13

All as per serial item No 17 but 40 - 50mm bore dia retrived from item no.14

All as per serial item No 17 but 80mm bore dia retrived from item no.15

All as per serial item No 17 but 100mm bore dia retrived from item no.16

M&L for 15mm bore GI tubing, medium grade laid in trenches / floors or fixed to wall in any length with screwed and socket joints together with all galvanised GI fitting such as sockets, bends, elbows, tees, reducers, unions, jointing materials etc and pressure testing, washing out complete all as specified and as directed.

All as per serial item No 23 but for 20mm bore.

All as per serial item No 23 but for 25mm bore.

All as per serial item No 23 but for 40mm bore.

All as per serial item No 23 but for 50mm bore.

All as per serial item No 23 but for 80mm bore.

All as per serial item No 23 but for 100mm bore.

S&F in repairs, GI union ISI marked suitable for the 40/50 mm dia bore of GI pipe , complete all as specified and directed .

All as per serial item No 30 but for 25 mm dia bore

All as per serial item No 30 but for 20 mm dia bore

All as per serial item No 30 but for 15 mm dia bore

S&F in repairs, GI nipple (length upto 9") suitable for the 40/50 mm bore GI pipe as per site required complete all as specified and directed.

All as per serial item No 34 but for 25 mm dia bore

All as per serial item No 34 but for 20 mm dia bore

All as per serial item No 34 but for 15 mm dia bore

M&L UPVC Pipe 15 mm bore of pressure rating 10 kgf/cm2 laid in trenches including jointing with jointing material/solvent and testing including taking out existing UPVC pipe complete all as specified and directed.

All as per serial item No. 38 but 20 mm bore pipe.

All as per serial item No. 38 but 25 mm bore pipe.

All as per serial item No. 38 but 50 mm bore pipe.

M&L high density polyethylene pipes of pressure rating PN 10 ,100 mm bore with fusion laid in trenches including jointing and testing including taking out existing high density polyethylene pipe complete all as specified and directed.

Repairs / rectification of leakages of 80mm bore dia CI/DI pipe with new lead wool/Run lead/Rubber gasket joint/mechanical joint ,caulking/ nut bolt tight etc. including burning out old lead joint/dismantling rubber gasket/ nut bolts including excavation & earthwork in any type of strata and making good all disturbed area to match the surrounding all as specified and as directed.

All as per serial item No 43 but 100mm bore dia.

All as per serial item No 43 but 150mm bore dia.

All as per serial item No 43 but 200mm bore dia.

All as per serial item No 43 but 250mm bore dia.

All as per serial item No 43 but 300mm bore dia.

All as per serial item No 43 but 600mm bore dia.

Taking up or down choked CI/DI water mains 80 mm bore including all fittings with spigot and socket ends including burning out joints, recovering lead and proper cleaning by internal brushing, removing chalkings and refixing / relaying, jointing, pressure testing and washing out complete all as specified and as directed. Note : Run lead joint/rubber gasket joint will be measured and paid seperately

All as per serial item No 50 but for 100 mm bore.

All as per serial item No 50 but for 150 mm bore.

All as per serial item No 50 but for 200 mm bore.

All as per serial item No 50 but for 250 mm bore.

All as per serial item No 50 but for 300 mm bore.

All as per serial item No 50 but for 600 mm bore.

M&L for 80 mm bore ductile Iron pipe with spigot and socket ends, centrifugally cast, class DI-K9, with finishing layer of bituminous coating as per annex C of IS 8329, including rubber gasket joint, conforming to IS: 8329 : 2000, ISI marked, in any length, laid in trenches, pressure testing, washing out complete all as specified and as directed.

All as per serial item No 57 but for 100 mm bore.

All as per serial item No 57 but for 150 mm bore.

All as per serial item No 57 but for 200 mm bore.

All as per serial item No 57 but for 250 mm bore.

All as per serial item No 57 but for 300 mm bore.

All as per serial item No 57 but for 600 mm bore.

M&L in repairs, for CI / DI fittings and specials such as Bends (any type, radius and angle), Tapers any type (straight, bend, increasing, decreasing or double socket etc.), Tee pieces single branch, "Y" junction, double branch, cross (all sockets or socket and spigot), Collars, Caps, Plugs, Connecting pieces one end flanged and other end socketed or spigot ends or all socketed / spigot ends etc, suitable upto 150 mm bore pipe complete all as specified and as directed.

All as per serial item No 64 but suitable for 200 to 600 mm bore pipe.

M&L for run lead joints suitable for 100mm bore dia pipe, spigot and socket ends complete and pressure testing all as specified and as directed.

All as per serial item No 66 but for 150 mm bore pipe.

All as per serial item No 66 but for 200 mm bore pipe.

All as per serial item No 66 but for 250 mm bore pipe.

All as per serial item No 66 but for 300 mm bore pipe.

M&L for styrene butadiene rubber gasket (IS : 5382) joint, suitable for 80 mm bore spigot and socket ends DI Pipes, Class K9, including pressure testing complete all as specified and as directed.

All as per serial item No 71 but for 100 mm bore DI pipe.

All as per serial item No 71 but for 150 mm bore DI pipe.

All as per serial item No 71 but for 200 mm bore DI pipe.

All as per serial item No 71 but for 250 mm bore DI pipe.

All as per serial item No 71 but for 300 mm bore DI pipe.

All as per serial item No 71 but for 600 mm bore DI pipe.

M&L for 15 mm bore gun metal globe or gate valve, ISI Marked, screwed both ends including taking down old unserviceable valve of any type / make complete all as specified and directed.

All as per serial item No 78 but for 20mm bore.

All as per serial item No 78 but for 25mm bore.

All as per serial item No 78 but for 40mm bore.

All as per serial item No 78 but for 50mm bore.

M&L for taking out 80mm bore leakaged sluice valve, repair/replacing grafite Grease gland rope, nuts, bolts, washers etc.all as specified and as directed.

All as per serial item No 83 but 100 mm bore.

All as per serial item No 83 but 150 mm bore.

All as per serial item No 83 but 200 mm bore.

All as per serial item No 83 but 250 mm bore.

All as per serial item No 83 but 300 mm bore.

All as per serial item No 83 but 600 mm bore.

M&L for taking out sluice valves of size 80 mm bore, re-facing, re-grinding, repacking stuffing box of sluice valve spindle of any make any type, including taking apart and reassembling, re-fixing, replacing nuts, bolts, washers complete all as specified and as directed.

All as per serial item No 90 but 100 mm bore.

All as per serial item No 90 but 150 mm bore.

All as per serial item No 90 but 200 mm bore.

All as per serial item No 90 but 250 mm bore.

All as per serial item No 90 but 300 mm bore.

S&F sluice valve of size 80 mm bore, cast iron, long body, both ends flanged as per IS-14846 and drilled with stainless steel spindle iron wheel head and as per pressure rating PN 1.6, Class I, ISI Marked alongwith nuts, bolts, washers , gaskets etc. including dismantling and taking out old unserviceable sluice valve complete all as specified and as directed.

All as per serial item No 96 but 100 mm bore.

All as per serial item No 96 but 150 mm bore.

All as per serial item No 96 but 200 mm bore.

All as per serial item No 96 but 250 mm bore.

All as per serial item No 96 but 300 mm bore.

S&F Rubber Lined Nov Return Valve B-02 (Ball Type) for 80 mm bore size , cast iron body, flanged end, including neophrene ball and by pass arrangement complete including suitable flanges, nuts, bolts, washers and rubbber gaskets including dismantling and taking down old unserviceable non return valve all as specified and as directed.

All as per serial item No 102 but 100 mm bore.

All as per serial item No 102 but 150 mm bore.

All as per serial item No 102 but 200 mm bore.

S&F cast iron body ball type foot valve flanged B-05(N) of 80mm bore size, including suitable flanges, nuts, bolts, washers and rubbber gaskets including dismantling and taking down old unserviceable foot valve all as specified & as directed.

All as per serial item No 106 but 100 mm size.

All as per serial item No 106 but 150 mm size.

All as per serial item No 106 but 200 mm size.

M&L in repairs, for mechanical joint having 2 Nos CI / DI Sockets, 1 No CI / DI Collar and 2 Nos styrene butadiene rubber gaskets for 80 mm bore pipe alongwith nuts, bolts, washers , gaskets etc. including cutting CI / DI pipe and reducing to required length for insertion in position of mechanical joint complete all as specified and directed.

All as per serial item No 110 but for 100 mm bore pipe.

All as per serial item No 110 but for 150 mm bore pipe.

All as per serial item No 110 but for 200 mm bore pipe.

All as per serial item No 110 but for 250 mm bore pipe.

All as per serial item No 110 but for 300 mm bore pipe.

All as per serial item No 110 but for 600 mm bore pipe.

M&L for construction of valve pit/chamber of Internal dimensions 1300 mm x 1300 mm x 1300 mm, using PCC 1:4:8, type D-2, using 40mm graded stone aggregates for foundation, 23 cm thick, brick wall built in cement mortar (1:4) ,15 mm thick rendering all around the brick work in cement mortar (1:6), 75 mm thick PCC (1:2:4) type B-1 using 20mm graded stone aggregates in coping including necessary form work, 3coats of white wash on rendered surfaces and on coping, 2 mm thick mild steel top sheet cover with frame made out of 40x40x6 mm angle iron, locking arrangement, including painting of steel surface with two coats of synthetic enamel paint over a coat of red oxide primer including demolition of existing valve chamber and clearing the debris complete all as specified and as directed.

All as per serial item No 117 but internal dimensions 1100 mm x 1100 mm x 900 mm

All as per serial item No 117 but internal dimensions 900 mm x 900 mm x 900 mm

All as per serial item No 117 but internal dimensions 500 mm x 500 mm x 500 mm

All as per serial item No 117 but internal dimensions 300 mm x 300 mm x 300 mm

S&F in repairs, of Mild steel bolts purpose made with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut exc 30cm long Diameter of neck n exc 12 mm complete all as specified and directed.

M&L for Cutting holes into wall or through cement concrete slabs, chajjas, including cutting reinforcement, superficial area exc 100sq cm but n exc 250 sq cm making surface good with cement motor (1:4) including necessary form work, 2 coats of white wash complete all as specified and directed.

S&F in repairs, water meter, class B of size 200 mm, flanged type, cast iron body including suitable flanges, nuts, bolts, washers and rubber gaskets all as per specified and directed.

M&L for taking out carefully submersible pump 2 HP to 5 HP from borewell along with HDPE Pipe , cable , clamps and dismantling opening and servicing , by replacing unserviceable parts such as impeller , bushing , thrust bearing waterseal / coupling , etc assembling , installing and testing all as directed by Engineer- in- Charge Note : Thrust bearing, SS coupling/adopter will be measured and paid separately as "Supply Only"

Supply only thrust bearing suitable for 2 HP To 5 Hp including lathe machine work all as specified and as directed.

Supply only, SS Coupling to connect DE and NDE ends of motor and pumps with locking pins suitable for 2 to 5 HP all as specified and as directed.

Supply only, SS Coupling / adopter, suitable to connect HDPE pipe to pump outlet with MS clips all as specified and as directed.

M&L in repairs,for copper flexible submersible cable, flat, 3 core, 1100 volts grade, PVC Insulated, 2.5 Sq mm including water proof joint all as specified and as directed.

Dismantling and taking out unserviceable electric sumersible pump set 2 to 5HP capacity from borewell and transportation to and from workshop, for repairing and rewinding with existing size copper wire, winding with insulating material and warnishing heating etc and reassembly installing on existing foundation including proper alignment and testing complete all as specified and directed.

Disconnecting electric supply old unserviceable induction motor & pump of capacity upto 5 HP, taking out and transportaion to workshop and refixing the same after repair/replacement of worn out parts such as motor and pump bearings, fan blade & rewinding the motor with suitable gauge of super enamelled copper wire of 'F' class insulation , warnishing, heating & reassembling & servicing of pumps, refixing with motor & testing reassembled motor & pump for satisfactory completion & testing at site complete all as specified and directed.

S&F in repairs, DOL starter in steel sheet enclosure, water proof, 3 phase, 440 volts, 50Hz, MU G -11 Mode,l fixed to angle iron (40mm x 40mm x 5mm) stand 1.00 mtr above ground level grouted in ground 45 cm with PCC 1:2:4 type B1(using 20mm graded stone aggregates) all as specified and directed.

M&L for Painting of pump and motor of capacity upto 5 HP at water supply PH including GI/CI/DI connected to pump scrapping the old painting and removing the grease, oil, dirt etc, filling the cavities, spray painting with two coats of super enameled anti corrosive paint of approved colour, over a coat of primer after taking proper shutdown of LT pannel and restoring of supply after completion of the work all as directed.

S&F float valve 20 mm bore, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for Iron or CPVC pipe, ISI Marked, including taking down old unserviceable valve of any type / make complete all as specified and as directed.

Drilling, tapping, cast iron water mains (in position) for branch connection of 15 mm internal dia of GI pipe including excavation and earthwork if required complete all as specified and directed.

All as per serial item No. 135 but for GI pipe 20 mm internal dia

MS. G.A. CONSTRUCTION

BHAVIN INFRA