8883/E8

Amount

Excavation in trenches, n. exc. 1.5m wide and n. exc. 1.5m in depth; for laying of cable, n. exc 10 sqm on plan and n exc 1.5 m in depth and getting out in soft/loose soil.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm.

Removing excavated material n. exc. 50 m and depositing where directed at a level n. exc. 1.5 m above the starting point

M&L fine sand, filling in trench for cable cushioning and gently punned down by manually with hands complete all as specified and directed.

Material and labour Brick protection cover to LT underground cable with Sub Class 'B' over burnt laid dry and flat abutting each other with gaps between adjacent bricks not exceeding 10 mm complete specified and directed

M&L PCC 1:2:4 type B-1 type (using 20 mm graded crushed stone aggregate) as in coping including necessary form work complete all as specified and directed.

M&L PCC 1:3:6 type C-2 type (using 40 mm graded crushed stone aggregate) as in pole/LT panel foundation complete all as specified and directed.

Supply and laying / fixing tubes 40 mm dia steel water tube light grade galvanised with all fittings laid in trenches complete all as specified and as directed.

M&L for repairing of old existing steel tubler pole base using PCC (1:4:8) type D-2, 40 mm grade stone aggregate, bricks including plastering, earth work and white wash painting complete all as specified and directed.

Material and labour for painting to Steel tublar poles 9 m long with one coat of Synthetic enamel paint black & yellow combination Zebra marking up to 1 m from ground level /copping remaining portion with all cross arm, bracing, cable protection pipe, clamps etc. painting with one coat of aluminium paint and writing 50 mm size figure/letter over back ground for marking pole numbers with white synthetic enamel paint complete including preparation of old painted surfaces etc all as specified and as directed.

Supply and laying in trenches or fixing or passing through pipes or fixed to wall/pole 1100 volts grade PVC/ XLPE insulated armoured heavy duty electric cables (conforming to IS :1554(Part- I) / IS 7098 (Part- I)with aluminium conductor of cross sectional area 10 Sqmm 2 core including taking down old one complete all as specified and as directed.

M & L Cable jointing kit for LT 1100 V (Earthed) grade cable for outdoor termination heat shrink type joint complete with jointing material and accessories suitable for 2 core / 4 core XLPE armoured aluminium conductor cable of size 6 sqmm to 25 sqmm incl cutting of old jointing material complete including taking down old one all as specified and as directed. (Make of Kit - M-seal / Denson / Raychem)

M&L for wiring with two runs of 2.5 sqmm (Nominal area) single core PVC insulated multistranded unsheathed FRLS copper conductor cable upto and including 1100 V grade drawn through and including PVC RIGID CONDUIT with all fittings fixed to pole incl one run of 2.5 sqmm (nominal area) single core, PVC insulated multistranded unsheathed FRLS copper conductor as earth wire complete including taking down old one all as specified and directed. (Note :-(i) One run of PVC conduit, two runs of 2.5 sqmm single core cable, one run of 2.5 sqmm earth continuity wire to be measured as one length).

M&L for Steel tubler swaged poles complete with cast iron base plate finial taper plug, bolts, nuts and screws,with two holes for drawing conductor between pole box to street light fitting all as specified type 410 SP-31 of height 9M including painting with two coats of aluminium paint over one coat of primer including Zebra marking with synthetic enamel paint and applying black bituminious paint to the buried surfaces in ground including taking down old one. NOTE: Earth work,PCC will be measured and paid separtely under relevent item of this Schedule.

Supply and fix MS Bracket made of 50mm dia MS pipe medium grade 1.5mtr long suitable for street light on steel / RCC pole as per site requirement including suitable nut,bolt and clamps complete accesseries including taking down old one all as specified and directed .

Supply and fixing of LED street light 120 W IP 66 with all fittings accessories complete including taking down old one all specified and directed. (Make: CG/Havells /Bajaj/philips )

Supply and fixing FRP street light box size - 300x200 x125 mm with DIN rail for MCB including 4 Pole PVC connector with all fittings complete including taking down old one all specified and directed.

Supply and fix MCB DP 240V, 6-32 Amps capacity complete including taking down old one all as specified and directed. (Make : Legrand /Schneider/GE )

M & L earthing complete with galvanised steel earth plate electrode 600X600X6 mm thick buried directly in ground vertically to a depth not less than 2.25m below ground level with the top edge of earth plate at depth not less than 1.5m below ground level connected with 4mm dia GI wire by means of bolts washers and protected by 15mm bore, medium grade GI pipe, funnel with 20mm bore GI medium grade watering pipe, wire mesh, copper lugs including concrete pit in PCC 1:3:6 type C-1, pre-cast RCC 1:2:4 type B-1 cover slab of size 350X350X50 mm, reinforced with 8mm dia deformed bars @15 cm C/C both direction and 10mm MS handle of suitable size, charcoal or coke and salt in alternate layers, necessary earth work in soft/loose soil, all as shown in Electrical Plate No 3 of MES Schedule Part-I and testing, complete including taking down old one all as specified and as directed.

SPECIAL CONCRETE AND CONSTRUCTION CO.

KALYPSO SALES AND SERVICES

KAMAKHYA TRADERS

JOY RAM ENTERPRISE

S C ROY AND CO

P N GUPTA AND SONS

UNIVERSAL TRADING CENTRE

BHASKAR SUPPLY AGENCY