Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹36.0 LAccepted-AOC KAPASS MILL KALONI BAZPUR ROAD KASHIPUR GUDIYA DEPTT WALI GALI UDHAM SINGH NAGAR UTTARAKHAND 244713 | UDAM SINGH NAGAR | UTTARAKHAND | 244713 | L1 | Accepted-AOC L1 | |
| 2 | L2₹40.0 L+₹3.6 L (10.0%)Rejected-Finance 96 SHASTRI NAGAR SHASTRI NAGAR JAMMU JAMMU KASHMIR 180004 | JAMMU | JAMMU AND KASHMIR | 180004 | L2 | Rejected-Finance other than L1 | |
| 3 | L3₹40.5 L+₹4.1 L (11.4%)Rejected-Finance 5 A LANE 1 GREATER KAILASH JAMMU J K 180011 | JAMMU | JAMMU AND KASHMIR | 180011 | L3 | Rejected-Finance other than L1 | |
| 4 | L4₹41.2 L+₹4.9 L (13.4%)Rejected-Finance | L4 | Rejected-Finance other than L1 | |
| 5 | L5₹41.8 L+₹5.5 L (15.1%)Rejected-Finance H NO 39 3 CHANNI HIMMAT JAMMU 180015 J K | JAMMU | JAMMU AND KASHMIR | 180015 | L5 | Rejected-Finance other than L1 |
Tender Value
₹49 L
EMD Value
₹98,000
Closing Date
17 Jul 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE SATWARI
GE SATWARI
COMPREHENSIVE REPAIRS TO PARKINGS, PATHWAYS AND OTHER MISC WKS AT ZONE 1 AND ZONE 2 OFFR MD ACCNS UNDER GE SATWARI UNDER AGE B/R-II AT GE SATWARI
2024_MES_661155_1
GEJM-32/2024-25
Open Tender
Civil Works
Item Rate
270 days
GE SATWARI
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GE SATWARI
₹98,000
Yes
10 Sept 2024
21 Jun 2024
19 Jul 2024
21 Jun 2024
17 Jul 2024
5 Jul 2024
Amount
Note:- Please refer Appx 'D' of particular specification for the list of makes of BOQ items.
Demolition of cement concrete (unreinforced) in ground floor and pavings n.exc 15 cm thickness (below or above ground level) and removing unserviceable material outside MoD land complete all as directed.
Material and labour for PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified.
M&L for PCC (1:2:4) type B 1 using 20mm graded stone aggregate as in walls or, retaining walls, any thickness, size or shape including pilastewrs, buttresses columns, pillars, boundary pillars and posts (including caps and bases) complete all as specified and directed by Engr-in-Charge.
M&L for use and waste Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rouh finished flat surfaces of concrete, complete all as specified and directed.
M&L Cement concrete (1:2:4) type B-1 using 20mm graded crushed stone aggregate in surface channels of drains and benching including finishing the top of benching even and fair complete all as specified and directed.
Extra for forming fair finished drain or channel 30CM inner girth in cement concrete using extra cement including forms, moulds mitred/stopped ends etc.
Dismantling posts or struts (wood, steel or R.C.C.) any section,Posts embedded in Concrete, brick work, masonry, etc. including taking out embedded portion and making good disturbed ground.
MS work such as angle iron fencing posts struts and flat iron fillets etc, including drilling hole punching,splitting ends to secure chain link fencing or fixing of barbed wire to posts including all necessary cutting, welding bolting or riveting etc complete all as specified and similar work conforming to Fe-290 Gde E-165.
Mild steel screw bolts machine made with hexagonal or square heads at one hand and screwed the other, ot screwed both ends, each screwed end to be fitted with washers n.exc 5 cm long and 5 to 10 mm dia.
Supply only chain link MS galvanised fencing of size 50mm x 50 mm cold dip complete all as specified.
Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, angle iron frame and flat iron, rails, straining bolts, etc. complete all as specified. Note:- Angle iron, flat iron & nuts and bolts shall be measured and paid separately.
Material and labour for 75 mm thick PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) laid in alternate as in sub base of floors/pathway/hardstanding finished even and fair to receive top finish complete all as specified and directed by Engr-in-charge.
Material and labour for Chequered cement concrete tiles 30cm x30cm x 25mm thick, with greay cement and pigment, set, jointed and pointed in neat cement slurry in floors and laid over and including 20mm thick screed bed in CM 1:4 etc complete all as specified and as directed.
Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.
Material and labour for PCC 1:2:4 type B-1 using 20 mm graded aggregate as in blocks for hold fasts, benching, coping apex stones, bed plates and the like including weathering slightly rounded or chamfered angles and throating all as specified and directed. Note :- Form work required for these items included in the unit rate of this item.
Dismantling timber scantlings 40 sq. cm and over in section, in any position all as specified.
Description all as item No 16 above but in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section all as specified.
Dismantling of AC or plain or corrugated steel sheeting, any gauge, thickness, including nanital or similar pattern roof covering.
Mild steel framed work as in door or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete and similar work conforming to Fe 410-W (Gde-E-250) quality -A complete all as specified and as directed by Engineer-in-charge.
Pre- painted galvatume aluminum zinc coating (AZ-150 Micron) GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick ( AZ-150 Micron) of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
M&L Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel, gusset plates, or flat sections) including distance pieces, cleats etcFe 410 -W (GdeE- 250) qualityA complete all as specified.
Demolition of brick work built in cement mortar or cement lime mortar incl all quoins, arches pillars etc and removing unserviceable material from the work site ouside defence premises complete all as specified.
Taking down cement plaster on brick or stone walls or stone walls etc, including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed by Engineer-in-Charge.
Brick work with subclass 'B' bricks, old size bricks, straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6 complete all as specified and as directed by Engineer-in-charge.
Brick work with subclass 'B' bricks, old size bricks, straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6 but except bricks complete all as specified and as directed by Engineer-in-charge.
Rendering 15 mm thick on fair faces of brick or concrete surface walls, in cement mortar 1:4 , rendering is to be finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-charge.
Rendering 15 mm thick on other than fair faces of brick or concrete surface walls, in cement mortar 1:4 , rendering is to be finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-charge.
Material & Labour for applying Two or more coats of 100% Premium acrylic exterior emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old/new plastered walls/ceiling surfaces.(Work will be carried out in different shade, the shade shall be directed by Engr in Charge/GE)
Material and labour for preparation of new steel surface of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified by Engineer-in-charge.
Preparation of new plastered/ concrete surfaces of walls to achieve smooth and even surface and applying two coats of cement based paint over and including one coat of primer complete all as specified and asdirected by Engr-in-charge.
Material and labour for two coats of oil bound distemper on new surface of walls over priming coat and making good surfaces with Birla white putty all as specified and directed.
Repair by welding n. exc 2.5 cm but n.exc 5 cm in length, thickness of metal to be welded exc 6 mm but n.exc. 9 mm to steel gates.
Repair to steel Gates (including slot pin, Pintol hinge,Ball bearing,hook and eye of standard quality where required, resecuring of MS plates/sheets & Guard bars /grills by using welding equipments complete all as directed
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.
Material and labour Non - skid Digital Ceramic joint less coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm , in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and set in neat cement slurry and pointed with coloured/white cement to match the surface over and including 15 mm thick screed bed in CM 1:4.( sample as approved & kept in GE's sample room)
Material and labour glazed ceramic coloured Digital tiles in vertical surface 300x450x7 to 8 mm thick, set and jointed in neat cement slurry and pointed white or colored cement to match the surface over and including 10 mm thick CM 1:4 all as specified.(Sample as approved & Kept in GE's sample room)
Material and labour 16-18mm thick Granite (Z- Black) (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including screed bed or bedding layer of cement mortar (1:4), 15mm thick all as specified and directed by Engineer-in-charge.
Material and labour,16-18 mm thick Granite (Z- Black)(of any type) work (table rubbed and polished) for wall lining' (Veneering to wall) 12 mm thick in cement mortar (1:3) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including rendering of cement mortar (1:4), 10mm thick all as specified and directed by Engineer-in-charge. (Colour and Size of Granite Slab shall be approved by GE).
Demolition of reinforced cement concrete of any discription and any Position ( ground to 4th floors) and removing the rubbish from the work site out side defence premises complete all as specified.
M&L for RCC, nominal mix, type B-1(1:2:4), using 20mm graded crushed stone aggregate as in Foundations, including rafts,footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete, complete all as specified and directed.
M&L for Reinforced cement concrete (nominal mix) Type B-1,1:2:4 (using 20mm graded crushed stone aggregate in Columns, pillars, piers, posts and struts.
M&L for use and waste form work to Formwork to sides of pillars, posts, struts, piers, columns and stanchions for fair finished Square, rectangular or polygonal surfaces of concrete, complete all as specified and directed.
M&L for use and waste form work to soffits of suspended slabs such as roof slabs, floor slabs landings and similar work, not exceeding 200mm thick (horizontal or sloping) for fair finished flat surfaces of concrete, complete all as specified and directed.
M&L for TMT mild steel bars10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for column, hooking end and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed.
M&L for Mild steel TMT bars 6 to 8mm dia., cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.90mm dia or securing with clips,
Description all as item No 46 above but 5 to 10mm dia as in stirrups & links etc.
Preparation of old decorated brick/concrete/ plastered/unplastered surfaces of walls, Pillars, cornices etc by brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots, rubbing with sand paper and applying one coat of cement base paint on walls, pillars, cornice etc (upto 4th storey with necessary scaffolding complete all as specified and directed.
Material & Labour and preparation of old painted surfaces and applying one coats of 100% Premium acrylic exterior emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm.(Work will be carried out in different shade, the shade shall be directed by Engr in Charge/GE)
M & L for preparation of old decorated concrete/ plastered surfaces of walls, Pillars, cornices etc by brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots & rubbing with dustfree sand paper mechanised scrapper as per paint manufacturer specifications and applying one coat of premium emulsion distemper on old decorated wall surface and necessary filling of wall care putty on uneven surface as and where required all as directed by Engineer-In-Charge.
M & L for preparation of old decorated plastered /concrete surfaces of walls, including complete removal of existing treatment & rubbing with dustfree sand paper mechanised scrapper and applying two coats of oil emulsion distemper over coat of wall care putty of 1 to 2 mm thick and one coat of primer complete all as specified.
M&L for applying one coat of synthetic enamel paint on old painted steel surfaces of any description having width/girth exceeding 10 cm including rubbing with sand paper or grinding by hand grinder to make surface even and smooth and applying primer where requred ( up to 4th storey with necessary scaffolding) complete all as specified (Note:- Paint to be done with different tint wherever required as directed by Engr-in Charge).
M&L for applying one coat of synthetic enamel paint on old painted wood surfaces of any description having width/girth exceeding 10 cm complete all as specified, grinding of uneven surface wood and necessary filling by putty ( up to 4th storey with necessary scaffolding) as and where requered to make surface even and smooth.
M/S MOHAN LAL GUPTA
NARESH KUMAR AND COMPANY
M/S MANJIT SINGH AND SONS
M/S ANIL MAHAJAN
J P TECHNO
THAKUR BUILDERS AND CO
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .