SPECIAL REPAIR TO BLDG NO T-47 (SINGLE OFFRS ACCN) UNDER GE (S) MAMUN AT MAMUN MIL STN

Amount

Taking down cement plaster on brick walls or stone walls any descrition etc including raking out joints, hacking for key, scrubbing down with water etc all as specified and directed.

Material and labour for 15 mm thick rendering in two layers (5 mm thick in CM 1:4 over 10 mm thick in cement mortar 1:6) mixing with WPC @ 200 ml/ bag of cement on brick or concrete surfaces and finished even and smooth without using extra cement all as specified. (Note:- WPC shall be measured and paid seperately)

Supply only liquid water proofing compound complete all as directed.

Material and labour for 10 mm thick rendering in cement mortar (1:6) on brick or concrete surfaces and finished even and smooth without using extra cement all as specified.

Material and labour for 5 mm thick rendering in cement mortar (1:3) on ceiling surfaces and finished even and smooth without using extra cement all as specified.

Material and labour for 10 mm thick rendering in cement mortar (1:4) on top of roof mixing with WPC and finished even and smooth without using extra cement including roughing and cleaning of existing surface, using chicken mess and maintaining slope all as specified. (Note:- WPC shall be measured and paid seperately)

Material and labour for preparation of new plastered surface of wall by applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces incl 1mm thick wall putty over new plastered surface to prepare the surface even and smooth complete all as specified and directed.

Material and labour for preparation of new plastered surface of wall by applying 2mm thick wall care putty and making the surface smooth and applying two coat of oil emulsion distemper over a coat of primer, complete all as specified & directed.

Material and labour for prepairing new surfaces of ceiling and applying two coats of oil bound distemper over a coat of primer, complete all as specified & directed.

Material and labour for complete removal of existing treatment of wall and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm, complete all as specified and directed.

Material and labour for complete removal of existing treatment of wall and applying 2mm thick wall care putty and making the surface smooth and applying two coat of oil emulsion distemper over a coat of primer complete all as specified & directed.

Material and labour for preparation of old plastered surfaces of wall by scrapping down smoke roots, moulds salts and treading oil and greasy spots with wire brush and applying two coat of white wash, complete all as specified and directed.

Material and labour for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exc. 0.11 sqm and n. exc. 0.18 sqm in floors etc set and jointed (joint free) in neat cement slurry and pointed in coloured cement laid over screed bed or bedding layers of mortars 15 mm thick in CM 1:4 for laying floor finishes including dismantling floor, hearth or wall tiling, complete all as specified and directed.

Material and labour for light shade Vitrified Ceramic tiles 8 to 10 mm thick (square/ rectangular), area of each tiles exc 0.18sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over screed bed or bedding layers of mortars 15 mm thick in CM 1:4 for laying floor finishes including dismantling floor, hearth or wall tiling, complete all as specified and directed.

Material and labour for glazed ceramic coloured tiles in vertical surface 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match including rendering 10mm thick in CM (1:4) rough finished and dismantling floor, hearth or wall tiling including cement mortar bedding, complete all as specified and directed.

Supply and fixing of Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws incl dismantling of AC/steel sheets, complete all as specified and directed.

Supply and fixing of Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick and of an ecofriendly colour having tensile strength of 550 Mpa as in ridges/valley, fixed with self tapping screws incl dismantling of existing ridge, complete all as specified and directed.

Supply and fixing of False ceiling of 8 to 10 mm thick gypsum tiles (600x600mm) laminated with PVC film on the face side & metalised polyester film on the back side with all four edges sealed with PVC film (shade either plain white or crack) fixed using T grid/Cross-T/Wall angle/level clip & suspenders/ Hangers (upto1200mm length) adjusting level fixed to roof slabes/trusses complete all as specified standard galvanised sections in a grid size of 600x600mm including dismantling of existing ceiling board & grid work etc of any type/pattern, complete all as specified and directed.

Taking down chowkats or frames of any description not exc 1.50 Sqm each with shutters, (without taking off shutters from the frame) including builders hardware complete all as specified and directed.

Taking down chowkats or frames of any description exc. 1.50 Sqm and n.exc 4.00 Sqm each with shutters, (without taking off shutters from the frame) including builders hardware complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm and n exc 2 Sqm each complete all as specified and directed.

Supply and fixing of pressed steel frame made out of MS sheet 1.25mm thick of size 125mm x 60mm for doors / windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. including filling of concrete 1:3:6 type C-0 (12.5mm graded stone aggregate) as in back of chowkhats and including two coats of synthentic enamel paint over a coat of red oxide primer, complete all as specified and directed.

Supply and fixing of pressed steel frame made out of MS sheet 1.25mm thick of size 105mm x 60mm for doors / windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. including filling of concrete 1:3:6 type C-0 (12.5mm graded stone aggregate) as in back of chowkhats and including two coats of synthentic enamel paint over a coat of red oxide primer, complete all as specified and directed.

Supply and fixing of Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplied and fitted in openings as per specification and drawing shown in SSR Part-II, complete all as specified.

Supply and fixing of 35mm thick, 2nd class hard wood plain framed, panelled (factory made) shutters (panels) with lock rail and panel of 9mm thick BWP commercial ply. The size of rail and stile as per IS-1003 (Part-I) (Larger size to be provided) kiln seasoned and chemically pressure treated, fitted to chowkhats including preparation of surfaces of shutter and application of two coats of synthetic enamel paint over a coat of pink primer, etc complete all as specified and directed.

Supply and fixing of 35 mm thick wire guazed and skeleton shutters (1st class softwood) , open rebated and prepared to receive wire cloth, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing wire cloth, etc.size of members of shutters as specified in clause 8.24 (a) of SSR Part-I, fitted to chowkat including preparation of surfaces of shutter and application of two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed

Supply and fixing of factory made solid UV wood grain printed panelled/ plain PVC single piece door shutter 30 mm thick style, consisting of frame made out of M.S. tubes 19 guaze thickness & size of 19mm x 19mm for stiles, top and bottom rails. M.S. frame shall have a coating of steel primer, the frame shall be covered with heat moulded wood grain UV printed PVC sheet tape fixed in MS frame welded sealed to the stiles and rails with suitable PVC sheet beading, and joined together with solvent cement, supplied & fitted in the frame at site as per specification & drawings shown in SSR Part-II, complete as specified.

Dismantling timber scantling 40 Sqcm and over in section in unframed work etc complete all as specified and directed.

Supply and fixing of Box type Steel windows and ventilators comprised of tubular frame and shutters made out of 1.25mm thick MS sheet tube factory made with double side hung wire gauged shutter & glass/glazed shutter (wire cloth and glass panes only shall be measured and paid separately) with steel handle and steel peg stay dovetailed or welded incl 2 Nos. tower bolts 150mm long for each leaf and 10mm square bar grills at spacing as shown on drg, welded to F I frame work, including other fittings; hinges, handles, tarred hold fasts fixed in PCC blocks etc all as shown on drg No CEPZ/TD-27/13 sheet 1/4 to 4/4 including two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and directed.

Material and labour for 4 mm sheet glass , ordinary quality in square or rectangle n. exc 0.5 sqm each pane fixed to framed work with putty of fixed with beads/ clips etc omplete all as specified.

Hacking out old broken glass ( any thickness , size, quality, or description) from metal frame glazed with putty or fixed with beads/ clips, complete all as specified.

Material and labour for 4 mm Figured glass, pinhead type fixed in repair in squares n exc 0.5 sq. m each pane fixed to framed work with beading/ putty clips etc complete all as specified.

Supply and fixing of Stainnless steel wire cloth fixed 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wirre staples or rubber/all beads, complete all as specified and directed.

Demolition of brickwork or stone/ boulder masonry, built incement mortar including all quoins, arches, pillars, etc but excluding ashlar facing, dressed stone work and pre cast concrete articles, complete all as specified and directed.

Material and labour for Brick work with fly ash bricks (Old Size bricks) straight or curved on plan exc 6 mtr mean radius built in CM (1:6), complete all as specified and directed.

Material and labour for 75mm thick Cement concrete type B-1, 1:2:4 (using 20mm graded aggregate) as in floor without using extra cement including cutting grooves not exceeding 1.5mx1.5m grid size, complete all as specifed.

Demolition of cement concrete (unreinforced) in ground floor and paving not exc 15cm thickness (below or above ground level) complete all as specified & directed.

Material and labour for PCC 1:2:4 type B-1 (using 20mm graded aggregate) as in surface channels & drains, complete all as specified and as directed.

Material and labour for Extra for forming fair finished drain or channel 30cm inner grith in cement concrete, using extra cement, including forms, moulds, mitred/stop ends etc. complete all as specified and as directed.

Material and labour for SGSW drain pipes 150mm bore, grade 'A' laid in trenches and jointed in cement mortar (1:1) with spun yarn and tested complete all as specified and directed.

Material and labour for Concrete bed to 150mm bore drain pipes including packing under, and haunching against the sides of pipes after they are laid in cement concret 1:3:6 (Nominal mix) type C-2 using 40mm graded stone aggregate, and tested, complete all as specified & directed.

Material and labour for Cutting into existing manholes for connecting new drains of 150mm bore, making good to pipe and rendering, cutting out existing benching for and forming branch channel ( 1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required complete all as specified.

Supply and fixing in repair 15mm bore pillar cock fancy type, screwed down high pressure with or without letters hot or cold with long screwed shank and fly nuts screwed for iron pipe complete all as specified & directed.

Supply and fixing in repair Bib taps with flange for 15 mm bore pipe, cast copper alloy fancy type chromium plated fixed complete all as specified and directed.

Supply and fixing in repair Stop valve/ Angle valve with flange cast copper alloy (ISI Marked) chromium plated screwed down high pressure with capstan head screwed both ends for iron pipe 15mm bore dia complete all as specified and directed.

Supply and fixing in repair Stop valve concealed cast copper alloy (ISI Marked) fancy type, chromium plated with long shank and cup (concealed type) screwed down high pressure with capstan head screwed both ends for iron pipe 15mm bore dia complete all as specified and directed.

Supply and fixing in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass (cutting in any shape) fixing with chromium plated brackets guard complete all as specified.

Supply and fixing in repair towel rail CP 600 mm long complete all as specified and directed.

Supply and fixing in repairs chromium plated toilet paper holder complete all as specified and directed.

Supply and fixing in repair CP Shower rose with or without swivel joints, any size including fixing to steel pipe or union complete all as specified and directed.

Supply and fixing of 200 mm long aluminium anodised, barrel tower bolts of ex- truded section and fixed, complete all as specified and directed.

Supply and fixing of 150 mm long aluminium anodised, barrel tower bolts of ex- truded section and fixed, complete all as specified and directed.

Supply and fixing of 150 mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified.

Supply and fixing of 100 mm long Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed.

Supply and fixing of 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed.

Supply and fixing of 300mm mild steel , ordinary rat tail rod pattern springs including roller and roller plate, complete all as specified and directed.

Supply and fixing in repair Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed with 20 mm dia pipe, complete all as specified and directed.

Supply and fixing in repairs PVC flushing cistern 10 ltr capacity including PVC connection inlet and outlet connections, brackets, PVC flush pipe with bend 32 mm dia of suitable length including making necessary connections to water supply pipe line and jointing to WC all as specified and directed.

Supply and fixing in repairs Vitreous china wash basin, white flat back of size 550x400mm, including waste pipe , brackets and cutting for and pinning in ends of brackets or errecting stand and 32 mm dia PVC waste pipe fixed with copling 32mm size full thread, complete all as specified and directed.

Supply and fixing in repair Vitreous china wash down water closet pan (pedestal pattern), white, complete including fixing to trap including Supply and fixing of PVC seat cover for pedestal pan, complete all as specified and as directed.

Supply and fixing in repair CP brass 15 mm dia Jet Spray (with 1.50 mtr tube) fixed to wall with angle vavle complete all as specified and directed.

Supply and fixing of Stainless steel Grating doom 100mm dia with waste hole complete fixing in floors, complete all as specified and directed.

Supply and fixing of Stainless steel Grating doom 100mm dia complete fixing in floors, complete all as specified and directed.

Supply and fixing of PVC connections 15mm size with PTMT nuts of length 450mm, complete all as specified and directed.

Supply and fixing of Rotational moulded polyethlene water storage tanks of capacity 1000 litres three layers (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete including 20mm dia ball PVC valve high pressure with polythene float incl taking down existing water tank of any capacity complete all as specified & directed.

Supply and fixing in repair 15mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling including taking down unserviceable tubing etc complete all all as specified.

Supply and fixing in repair 20mm bore tubes medium grade galvanized with all fittings short pieces and fixed complete to walls, floor, ceiling including taking down unserviceable tubing etc complete all as specified.

Supply and fixing in repair 20 mm bore mild steel drapery rods with 1 mm thick Stainless steel including brackets and knobs fixing on windows and doors for hanging curtains complete all as specified and directed.

Material and labour for 75mm thick Cement concrete type C-1, 1:3:6 (using 20mm graded aggregate) as in plinth protection finished even and smooth incl making joints at every 2.5m and at corner filled with bitumen 85/25 and sand in ratio 1:2 by weight and complete all as specifed.

Supply and fixing of 150 mm dia PVC (SWR) type "B' pipes single socketed in any length with rubber ring joints, laid in trenches or floors jointed with solvent cement incl demolition of existing, complete all as specified and directed.

Supply and fixing of LDPE waste pipe, 32 mm dia, suitable for WHBs/sinks, including threaded PVC socket suitable for shank of waste coupling complete all as specified and directed.

Supply and fixing of PVC(SWR) pipes 110mm dia bore, single socketd , in any length with rubber ring joints , in any length fixed to walls with and including clamps complete all as specified and directed.

Supply and fixing of PVC (SWR) bend with oval accessed door any radius 110mm dia bore complete all as specified and directed.

Supply and fixing of PVC (SWR) bend any radius 150mm dia bore complete all as specified and directed.

Supply and fixing in repair CI floor trap 75 mm with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 with CP grating with or without hole for waste pipe complete all as specified and directed.

Supply and fixing in repair CI floor trap 100 mm with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 with CP grating with or without hole for waste pipe complete all as specified and directed.

Supply and fixing in repair CI gully/nahani trap 100 mm with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 with CP grating with or without hole for waste pipe complete all as specified and directed.

Dismantling of cast iron or reinfored concrete drain pipes, jointed in cement mortar and taking out of trenches, if required, internal dia of pipe 100mm, complete all as specified & directed.

Dismantling of cast iron or reinfored concrete drain pipes, jointed in cement mortar and taking out of trenches, if required, internal dia of pipe 75mm, complete all as specified & directed.

Dismantling of cast iron or reinfored concrete drain pipes, jointed in cement mortar and taking out of trenches, if required, internal dia of pipe 50mm, complete all as specified & directed.

Supply and fixing in repair 100 mm bore sand cast iron soil waste and vent pipes ISI marked in any length with or without ears with cement joints, fixed to walls, complete all as specified.

Supply and fixing in repair 100 mm dia CI bends with oval accessed door (any radius) diminishing pieces or tapers (larger bore measured) complete all as specified and directed.

Supply and fixing in repair cast iron cowl for 100 mm dia complete all as specified and directed.

Supply and fixing in repair in 75 mm bore sand cast iron soil waste and vent pipes ISI marked in any length with or without ears with cement joints, fixed to walls, complete all as specified and directed.

Supply and fixing in repair 75 mm dia CI bends with oval accessed door (any radius) diminishing pieces or tapers (larger bore measured) complete all as specified and directed.

Supply and fixing in repair in 50 mm bore sand cast iron soil waste and vent pipes ISI marked in any length with or without ears with cement joints, fixed to walls, complete all as specified and directed.

Supply and fixing in repair 50 mm dia CI bends with oval accessed door (any radius) diminishing pieces or tapers (larger bore measured) complete all as specified and directed.

Supply and fixing in repair Cast Iron Branch peices, single(equal or unequal) ordinary or inverted (spigot or socket type), or with parrallel branches fitted with oval access doors of 100 mm bore dia complete, ISI Marked, complete all as specified and directed.

Supply and fixing in repair Cast Iron Branch peices, single (equal or unequal) ordinary or inverted (spigot or socket type), or with parrallel branches fitted with oval access doors of 75 mm bore dia complete, ISI Marked, complete all as specified and directed.

Supply and fixing in repair Stack clamps out of 50 mm by 5 mm flat and 16mm dia round iron strip and nuts and securing ends of stays to wall or roof for 100 mm dia CI pipe complete all as specified and directed.

Supply and fixing in repair Stack clamps out of 50 mm by 5 mm flat and 16mm dia round iron strip and nuts and securing ends of stays to wall or roof for 75 mm dia CI pipe complete all as specified and directed.

Supply and fixing in repair Stack clamps out of 50 mm by 5 mm flat and 16mm dia round iron strip and nuts and securing ends of stays to wall or roof for 50 mm dia CI pipe complete all as specified and directed.

Material and labour for cement Concrete bed (1:4:8 type D2) to 150 mm dia pipes including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

Supply and fixing in repair 18 mm thick lead free factory made 100% Solid WPC (Wood Polymer composite) board one side printed and other side wood nature colour having high natural fiber contains 25 to 30% wood colour sheet with density not less than 600 kg /Cbm bent 90°and the weight of sheet of 1 sqm should be 11 kg(+/- 5%) manufacture by ISO-9001-2015 certified company, the sheet should be 100% termite/water proof, fire rertradent, Eco friendly, and finish at all edges at level for making edges lipping using binding tape etc as in Kitchen cupboard, Cabinet etc complete all as specifed and directed.

Material and labour for 2nd class hard wood as in plain fillets, square, rectangular or traungular in section, clean sawn, secured with nails or brads exc. 13 but n.exc. 25 Sq CM complete all as specified and directed.

Material and labour for moulded hand rails of size 100x 75 mm of 1st class soft wood, rounded or shaped with splayed faces in straight lengths and fixed, complete all as specified and directed.

Material and labour for Preparation of old painted surface of steel of any discription exc 10cm width or girth and providing one coat of synthetic enamel paint complete all as specified and directed.

Material and labour for Preparing new surface of steel of any discription exc 10cm width or girth and providing two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

Material and labour for preparing of Old wooden surface of any description exc 10 cm width or girth & applying one coats of synthetic enamel paint all as specified and directed.

Material and labour for preparing of new wooden surface of any description exc 10 cm width or girth & applying two coats of synthetic enamel paint over one coat of pink primer.

Material and labour for Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and or reveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290 grade-E-165, complete all as specified.

Material and labour for Rolled mild steel work in joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary length i.e. within 20mm of the length indicated), conforming to Fe 410-W(Gde-E- 250) quality-A, complete all as specified & directed.

Material and labour for Mild steel framed work as in plates (plain or chequered) channels square cut or notched (ordinary and counter sunk) forming holes, without any attachment, conforming to 410-W(Gde-E- 250) quality-A, complete all as specified & directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified.

Material and labour for coloured 60mm thickness, M-35 Grade, machine pressed precast rubber moulded concrete interlocking (red/yellow) paver block of any shape and size with 6-8mm white cement layer mixed with pigment and coated with epoxy coating having high glossy finish confirming to IS 15658-2006, laid dry over and including 50 mm thick screened river washed sand cushion, complete all as specified and directed.

Material and labour for 75 mm thick P.C.C 1:4:8 type D2 (using 40 mm graded aggregate) as in sub base of flooring complete all as specified and as directed.

Material and labour for PCC (1:2:4) type B-1 using 20mm graded crushed stone aggregate as in , in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.

Material and labour for premirror polished Marble Green/Bhaisiana Zebra 18 to 20mm thick in single piece in steps (tread and risers) and floor jointed in neat cement slurry including pointing in epoxy grout to match marble shade, laid over and including 15mm thick screed bed in CM 1:4 or 10 mm thick backing coat in verticle surfaces complete all as specified and directed incl rounding edges and demoliition of existing stone slab of any type and description, complete all as specified and directed.

Taking down carefully point wiring with copper/aluminium conductor for light, fan, socket or power including fixture and fittings such as switches, sockets, light fitting any type, holders, (batten type and pendent), ceiling rose, wooden boards, shades any type and making good dismantled surfaces, complete all as specified & directed.

Material and labour for Point wiring using FRLSH PVC insulated unsheathed /multi stranded copper conductor cable 1.5 sqmm including 1.5 Sqmm FRLS PVC insulated unsheathed copper conductor earth wire in green colour connected to common earth dolly drawn through and including concealed PVC conduit of appropriate size not less than 20 mm dia and 1.8 mm thick including all fittings viz tees, bend, junction box and modular metal flush sunken box 1.6 mm thick with suitable support frame and cover plate (inner/outer) of required modules for mounting switches, sockets, fan regulators, connecting earth for light/fan/bell point including cutting chases in walls and making good to disturbed surface complete all as specified and directed . Note : a) Switch/bell push/fan regulator shall be measured and paid separately. b) In ceiling portion surface conduit wire shall be carried out.

All as per Srl item No. 112 above but for one light point controlled by two switch 6/10 Amp, SP, two way, complete all as specified and directed.

All as per Srl item No. 112 above but for 5 pin 5/6 Amp socket outlet point on same board controlled by one switch 5Amp one way, complete all as specified and directed.

All as per Srl item No. 112 above but for 5 pin 5/6 Amp socket outlet point on independent board controlled by one switch 5Amp one way, complete all as specified and directed.

All as per Srl item No. 112 above but for one 15Amp multipurpose oulet socket and metal plug top for geyser point concealed using 4 Sqmm FRLSH PVC insulated multi-strand copper conductor wire including 4 Sqmm FRLSH PVC insulated unsheathed copper conductor earth wire and making good to disturbed surfaces of wall floor to match existing finishes complete all as specified and directed.

Supply and fixing modular switch one way 6/10 Amp one module, complete all as specified and directed.

Supply and fixing modular switch two way 6/10 Amp one module, complete all as specified and directed.

Supply and fixing modular socket 6/10 Amp, 2/3 pin mutipurpose, 2 module, complete all as specified and directed.

Supply and fixing modular switch piano one way, 16 Amp, one module, complete all as specified and directed.

Supply and fixing modular socket 6/16 Amp, 2/3 Pin multipurpose, 2 module, complete all as specified and directed.

Supply and fixing Fan regulator modular step type suitable for 1200mm sweep ceiling fan hum free, 120W- 2 module including necessary connections complete all as specified and directed.

Supply and fixing Ceiling rose polycarbonate isolated body surface Bakelite, not less than 65 x 50 mm, three terminals, AC 230 volts etc, complete all as specified and directed.

Supply and fixing Lamp holder, insulated body, with back plate for batten fittings including 9W LED lamp, complete all as specified and directed.

Supply and fixing in replacement sheet metal enclosure MCB distribution board Single pole & neutral 240 volts 08 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed.

Supply and fixing in replacement MCB single pole (SP) 240 volts, 50Hz, 6 to 32 Amps, 10KA (B-series) complete all as specified and directed.

Supply and fixing in replacement MCB SPN 240V, 50Hz, 40-63Amps, 10 KA (C-series), complete all as specified and directed.

Material and labour for sub main wiring with two run of single core FRLSH, PVC insulated, multistranded, unsheathed copper conductor cable of size 06 Sqmm 1100 V drawing through & including suitable size of non metallic PVC rigid conduit concealed in wall including one run of earth continuity conductor of size 06 Sqmm PVC insulated unsheathed multi stranded copper conductor cable 1100 V including connecting to main board complete all as specified and as directed. Note: Two run of submain wire (phase and neutral) and one run of earth including PVC conduit and accessories will be measured as one run.

Supply and fixing of 20W 4 feet long surface/wall mounted box type batten LED luminaire, extruded aluminium housing with PC diffuser and integrated electronic driver with high efficiency long life, CRI=80(Minimum), PF>0.95, luminous efficacy > 100 lumens/Watt operating voltage 140V-240V, colour temperature (CCT) = 5700 + 300K, THD < 10% complete with all accessories internally prewired and including connection up with 3 core flexible copper conductor cable of suitable size from ceiling rose to connector of LED fitting complete all as specified and as directed.

Supply and fixing in replacement of Wall mounted decorative bracket light with injection moulded ABS body and unbreakable ribbed transluscent globe 15Watt with prefixed lamp of 15 watt, complete all as specified and directed.

Supply and fixing of box type 10 Watt LED 2 feet length as mirror light with all accessories internally prewired and including connection up with 3 core flexible copper conductor cable of suitable size from ceiling rose to connector of LED fitting complete all as specified and as directed.

Supply and fixing Energy saving, surface mounted bulk head luminaire 10W made of pressure die cast aluminium housing with IP 65 protection complete including connecting up with three core twisted flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fixing in replacement of prewired sheet metal enclosure Vertical type (VTPN) distribution board, double door, tripple pole & neutral 415 volts degree of protection IP-65 DBs TPN 4 way suitable for MCCB as incommer and as outgoing MCB incl MCCB 415 V 63/100 Amp 16 KA as incomer and 12 Nos MCB SP of Cap upto 63 Amp as a outgoing complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification, complete all as specified and directed.

Supply and fixing in replacement of bldg security light fittngs with new LED street light fitting 25 Watts, IP 65, having pressure die cast alumn alloy housing, prismatic polycarbonate cover including making connection with 3 core copper flexible cable of size 23/.0076 including galvanised iron bracket 0.90 mtr long of suitable dia bend in shape as required and fixing on wall with clamps, nuts, bolts and washer, complete all as specified and directed.

Material and labour in replacement for earthing complete with galvanized steel earth plate electrode 60cmX60cmX6mm thick buried directly in ground (earth plate not less than 2.25 mtr deep below the normal ground level) with top edge of plate not less than 1.5 mtr below the normal ground level connected to galvanized earth lead wire of 4.0mm dia by means of nuts bolts, washers, check nuts of iron or steel including PCC pits and RCC cover in PCC 1:2:4 (type B-1) and necessary earth work in any type of soil medium grade GI watering pipe 20 mm dia with funnel and wire mesh and 15mm bore GI pipe light grade protection pipe upto test point etc including excavation and charcoal, common salt surrounded with 15cm all around the plate all as specified and shown in EP-3 of SSR Part-I. all specified

Supply and lay in replacement of cable LT XLPE insulated armoured heavy duty electric cable with aluminium counductor, 1100 volts grade of crosssectional area 25 Sqmm 3.5 Core complete all as specified and directed.

Excavation in trenches not exc. 1.5m wide and not exc. 1.5m deep in any type of soil for laying of underground cable, foundation of poles & stays etc., and getting out, complete all as specified and as directed

Returning, filling in (soil), including spreading, leveling, watering and well ramming in layers not exc. 25cm, complete all as specified.

Removing surplus excavated material to a distance from site not exc. 50m from starting point and depositing where directed at a level not exc. 1.5m above the starting point, complete all as specified.

Material and labour for sand cushioning for cables 8 cm below the cable and 15 cm above the cable all as specified and directed

Material and labour in replacement of old size brick sub class B well burnt, laid flat for cable protection complete all as specified and directed.

Material and labour for replacement of GI tubing light grade 50 mm bore for passing through cables under the floor, along the wall or along the pole complete all as specified and directed.

Supply and fixing in replacement sheet metal enclosures single pole and neutral earth enclouser with a two pin and earth plug and socket complete with one double pole MCB 20 amps, 240 volts, complete all as specified.

Dismantling and taking out burnt winding by cutting, cleaning slouts and re-winding of AC ceiling fan motor1200mm/1400mm of any make/model of fan with super enameled heat resistant copper winding wire of existing gauge & nos of turns including, sleeve work, varnishing with E class insulation, greasing , threading, connection with flexible wire 0.472 mm copper wire upto connector block and re-assembling and testing for 4 Hrs after repair complete all as spd and directed ( Repairs will be measured and paid for separately under respective items) Note :-(i) Motor shall be wound with machine only and repair of fan inside complex / office of GE (S) Mamun. (ii) Khaitan/RPG/KEI or equivallent make super enameled copper winding wire shall only be used. (iii) Rates are deems to be included cost of repair /servicing & replacement of minor spare part i.e. blade screws, clamps terminal connection , split pin spring washer etc.

Material and labour for replacement of old unserviceable gun metal bush of ceiling fan complete all as specified and directed.

Material and labour for replacement of old unserviceable capacitor AC 415 volts 2.5 mfd oil filed ISI marked complete all as specified and directed.

Material and labour for replacement of old unserviceable ball bearing of suitable size as per existing make and size of ceiling fan complete all as specified and directed. Note : Bearing with 8 balls shall only be provided.

Material and labour for servicing of ceiling fans of capacity 1200/1400mm including taking down from site , dismantling, cleaning, greasing/oiling of bush and bearings, replacement of set of split pins, cotter pins, blade screws, cup of both side and refixing to the existing site after servicing complete all as directed.

Material and labour for replacement of old unserviceable fan blades as per existing shape, colour and design suitable for 1200/1400mm sweep ceiling fan of any make complete all as directed.

Material and labour for servicing of exhuast fans of capacity up to 300 mm including taking down from site, dismantling, cleaning, greasing/oiling of bush and bearings, replacement of outer gasket and nut & Bolts incl cleaning of outer part & fixing wall and refixing to the existing site after servicing complete all as directed by Engr-in-Charge. Note : i) Contractor shall deployed one elect & one helper for servicing at site on all working day for the period of contract. ii) Unserviceable parts if any will be measured and paid seperately.

Material and labour for dismantling and Re-winding of exhaust fan/industrial wall mounting fan/pedstral fan motor 150-300mm sweep any make of fan with super enameled heat resistant copper winding wire 31 SWG to 34 SWG including cutting and getting out old brunt winding, sleeve work, varnishing with E class insulation greasing, threading, connections with twin core copper flexbile wire of size 23/0.0076mm of length not more than one mtr with each fan complete all as spd and directed. Note :- (i) Motor shall be wound with machine only. (ii) Khaitan/RPG/KEI /RR or equivallent make super enameled copper winding wire shall only be used. (iii) Exhaust fan are deems to be included cost of repair /servicing & replacement of minor spare part i.e. body screws, capacitors, clumps, clips etc.

Material and labour for replacement of removing old paint by scraping with sand paper including washing and filling cavaties with filter and applying two coats of painting to ceiling fan 1200-1400mm sweep at workshop with heat resistant synthetic enamel paint by spray painting incl, writing MES No on the ceiling fans as directed. Note: Paint qaulity and colour shall be got approved from GE.

Material and labour for replacement of old unserviceable outer body of ceiling fan bottom and upper cover plate incl all fitments such screws, gasket cover canopy of both side etc complete all as specified and directed by Engr-in-Charge and as per site requirement.

Supply and fixing in replacement existing unserviceable canopy top & bottom of ceiling fan as per existing size & shape complete all as specified and directed.

Supply and fixing in replacement existing unserviceable shutter and lover of exhaust fan as per existing size & shape complete all as specified and directed.

Supply and fixing in replacement existing unserviceable MS fan blade of exhaust fan as per existing size & shape complete all as specified and directed.

Material and labour for lathe work incl re-alignment to rotor, stater sloter, cleaning welding , bracing and polishing etc and refixing after repair and testing complete all as specified and directed by Engr-in-Charge.

M/S PURI & COMPANY

Abrol construction co

M/S NARESH KUMAR SHARMA

M/S S KUMAR & CO

M/S DUGGAL CONSTRUCTION CO

AV ENTERPRISES

M/S HIMANSHU BUILDERS