AGE I CGN 10 25 26 REPAIR TO PLINTH PROTECTION, HARD STANDING AND BOUNDARY WALL ETC AROUND BLDG AT SEC-62 CG NOIDA UNDER AGE (I) CG NOIDA

Amount

Taking down cement plaster incl raking out joints, hacking for key, scrubbing down with water incl rubbish off the demolished material out of Mod land complete all as specified and directed

Demolition of brick or stone masonry built in cement mortar including all necessary arches quoins arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises.

Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc., laid dry or laid dry and pointed.

Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level) and removing the demolished material out of MOD land complete all as specified and directed.

M&L for old size brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:6, complete all as specified.

All as per item No 6.00 above but excepts bricks.

M&L 10 mm thick rendering in CM 1:4 on fair faces of brick work or concrete surface, finishing the surface even and fair complete all as specified and directed.

M&L for washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified. Note: Rate to be quoted considering work upto 10mtr height, including cost of scaffolding

M&L for Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge

M&L 15 mm thick rendering in CM 1:4 on fair faces of brick work or concrete surface, finished even and fair complete all as specified and directed.

M&L for providing 75 mm thick cement concrete 1:3:6 type C-2 using 20mm graded crushed stone aggregates as in plinth protection laid in alternate bays (n exc 2 Sqm each) and finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified.

M&L for Roof tiles, Mangalore pattern, interlocking at side joints, laid dry or lay with cement paste all as specified and directed.

M&L for Ridge or hip tiles to suit Mangalore pattern of roofing tiles, bedded and jointed in cement mortar 1:6.

M&L for preparation of old painted surface and applying two coats of weather proof exterior emulsion paint on old surface of wall, chajjas, facia, Roof tile etc complete all as directed.

Demolition of reinforced cement concrete cover slab for MH/Spetic tank and removing the debris to a distance not exc 500 M as directed.

M&L for precast cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate for cover slab for Man holes/Septic tank set in CM 1:4.

M&L 10 mm dia and over TMT bar cut to length, bend to shape required incl cranking bending & hooking ends & binding with MS wire annealed not less 0.9 mm dia or securing with clips.

Providing and laying 60mm thick factory made cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand.

Providing and laying in repairs at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete all as specified and directed.

M&L for PCC 1:2:4 type B-1, (using 20mm graded aggregate) as in coping , benching, haunching including all necessary form work.

M&L for preparing plastered or un-plastered NEW surface of walls, priming with alkali resistant priming paint and applying two coats of Cement base paint.

M &L for preparing plastered or un-plastered old surface of walls and applying one coats of Cement base paint on walls all as specified and directed.

M&L PCC (1:2:4) type B-1, using 20 mm graded stone aggregate as in surface channels and drains etc.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc.

M/s SHRI RADHEY BUILDERS (BID ID -3335174)

M/s AARUSHI ENTERPRISES (BID ID -3326323)

Shri Radhey Associates (BID ID -3336723)

S.P CONSTRUCTION CO. (BID ID -3321434)