Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹69.3 L
EMD Value
₹1.4 L
Closing Date
1 Oct 2024, 5:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Facilities Management Division, Bangalore
HINDUSTAN AERONAUTICS LIMITED Facilities Management Division, Bangalore
Providing Face-lifting Works to Existing Dhanvantri Hall at IHC including Electrical Works, HAL Bangalore .
9547
TENDER NOTICE/NCP/23/24-25/02
Works
Contract Section Civil-FMD-Bangalore
₹0
₹1.4 L
1 Oct 2024
28 Aug 2024
28 Aug 2024
1 Oct 2024
HINDUSTAN AERONAUTICS LIMITED BANGALORE FACILITIES MANAGEMENT DIVISION
NAME OF THE WORK: Providing Face-lifting Works to Existing Dhanvantri Hall at IHC including Electrical Works, HAL [Bangalore]. CONTRACT NO. HAL/FMD/R-41/24-25
Name of the Tenderer:
Sl. No. Specification Quantity Unit Rate in Figs. [Excluding GST] Rate in Words Amount
Preamble: (1) The subject work has been called on works contract basis and prevailing GST for same is 18%. Any change in GST +/- during the currency of contract shall be on HAL account. The tenderer shall abide by prevailing GST act. (2) This BOQ specifications have to be read in conjunction with detailed technical specification and tender drawings if any. (3) The tenderer has to quote percentage above / below against the total amount considering the specified standard rates. If the contractor does not quote any percentage above / below on the total amount, the tender shall be treated as invalid and will not be considered. (4) The quoted percentage for the works mentioned below, shall be taken into consideration for evaluation of the tender. The lowest offer (L-1) will be determined considering the total amount including GST based on the quoted percentage.
Part 'A' - Civil Works
1 Demolishing cement concrete 1:3:6 or richer mix (i/c equivalent design mix) manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in-charge. 12.00 Cmtrs 2286.57 Rupees Two Thousand Two Hundred Eighty Six and Fifty Six Paise Only 27438.78
2 Dismantling doors, windows and clerestory windows (steel or wood) of area 3 sq. metres and below shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead etc. all complete as directed by Engineer-in-Charge. 5.00 Each 344.92 Rupees Three Hundred Forty Four and Ninety Two Paise Only 1724.61
3 Dismantling GS sheet roofing including ridges, hips, valleys and gutters etc.,and stacking the material within 50 metres lead etc. all complete as directed by Engineer-in-Charge. 25.00 Sqm 154.94 Rupees One Hundred Fifty Four and Ninety Four Paise Only 3873.56
4 Dismantling of flushing cistern and water closet of all types and sizes (C.I./PVC/Vitroeous China/ urinlas/ IWC/ EWC/ hand wash basin) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead etc. all complete as directed by Engineer-in-Charge. 4.00 Nos 231.22 Rupees Two Hundred Thirty One and Twenty One Paise Only 924.86
5 Dismantling tile work For thickness of tiles 10 mm to 25 mm in floors and roofs / walls laid in cement mortar including stacking material within 50 metres lead etc. all complete as directed by Engineer-in-Charge. 210.00 Sqm 68.95 Rupees Sixty Eight and Ninety Four Paise Only 14478.84
6 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead etc. all complete as directed by Engineer-in-Charge. 400.00 Sqm 51.33 Rupees Fifty One and Thirty Three Paise Only 20533.76
7 Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge 5.00 Nos 403.07 Rupees Four Hundred Three and Six Paise Only 2015.33
8 Cement mortar (1:6) plastering 20mm thick for brick/concrete surfaces, finished smooth with trowel including lime rendering for interior faces of walls surfaces including scaffolding, curing etc., all complete as directed by Engineer-in-Charge. 400.00 Sqm 422.70 Rupees Four Hundred Twenty Two and Sixty Nine Paise Only 169079.49
9 Providing and laying Glazed Vitrified tiles Matt/Antiskid finish in floor in different sizes (thickness to be specified by the manufacturer) of size 600mm x600mm with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. The work shall be all complete as directed by Engineer-in-Charge. 110.00 Sqm 1375.98 Rupees One Thousand Three Hundred Seventy Five and Ninety Seven Paise Only 151357.61
10 Providing and laying Vitrified tiles in floor Size of Tile 600 x 600 mm (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. The work shall be all complete as directed by Engineer-in-Charge. 35.00 Sqm 1411.58 Rupees One Thousand Four Hundred Eleven and Fifty Seven Paise Only 49405.26
11 Providing and laying Vitrified tiles in floor Size of Tile 600 x 600 mm (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. The work shall be all complete as directed by Engineer-in-Charge. 15.00 Sqm 1375.98 Rupees One Thousand Three Hundred Seventy Five and Ninety Seven Paise Only 20639.67
12 Providing and laying Granite stone flooring Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent, in required design and patterns,in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. 60.00 Sqm 2992.80 Rupees Two Thousand Nine Hundred Ninety Two and Eighty Paise Only 179568.06
13 Providing & fixing fly proof wire gauze with Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts etc., all complete as directed by Engineer-in-Charge. 3.00 Sqm 1064.78 Rupees One Thousand Sixty Four and Seventy Seven Paise Only 3194.33
14 Providing and fixing aluminium work for doors, windows, ventilators and partitions with Powder coated aluminium (minimum thickness of powder coating 50 micron) built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately). 60.00 Kg 498.69 Rupees Four Hundred Ninety Eight and Sixty Nine Paise Only 29921.43
15 Providing and fixing glazing with float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge (Cost of aluminium snap beading shall be paid in basic item). 8.00 Sqm 1413.93 Rupees One Thousand Four Hundred Thirteen and Ninety Two Paise Only 11311.42
16 Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) 40 mm thick with 20 mm nominal size stone aggregate finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc., all complete as directed by Engineer-in-Charge. 380.00 Sqm 576.94 Rupees Five Hundred Seventy Six and Ninety Three Paise Only 219235.98
17 Dismantling old plaster / tar felt/ surkhi or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead etc., all complete as directed by Engineer-in-Charge. 350.00 Sqm 51.33 Rupees Fifty One and Thirty Three Paise Only 17967.04
18 Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3 mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/ litre and viscocity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc, and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 650/ 450N/ 5cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane. 350.00 Sqm 526.92 Rupees Five Hundred Twenty Six and Ninety One Paise Only 184421.11
19 Extra for covering top of membrane with Geotextile, 120 gsm non woven, 100% polyester of thickness 1 to 1.25 mm bonded to the membrane with intermittent touch by heating the membrane by Butane Torch as per manufactures recommendation. 350.00 Sqm 83.51 Rupees Eighty Three and Fifty Paise Only 29227.27
20 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth etc., all complete as directed by Engineer-in-Charge. 310.00 Sqm 146.58 Rupees One Hundred Forty Six and Fifty Eight Paise Only 45440.58
21 Wall painting with 2 coats of premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour etc., all complete as directed by Engineer-in-Charge. 310.00 Sqm 134.14 Rupees One Hundred Thirty Four and Thirteen Paise Only 41582.28
22 Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content with water thinnable cement primer on wall surface having VOC content less than 50grms/ ltr etc., all complete as directed by Engineer-in-Charge. 310.00 Sqm 69.46 Rupees Sixty Nine and Forty Six Paise Only 21533.68
23 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade of one or more coats on old work of steel, wood and concrete surface etc., all complete as directed by Engineer-in-Charge. 180.00 Sqm 96.56 Rupees Ninety Six and Fifty Six Paise Only 17381.37
24 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required etc., all complete as directed by Engineer-in-Charge. 2.00 Nos 7520.84 Rupees Seven Thousand Five Hundred Twenty and Eighty Four Paise Only 15041.69
25 Providing and fixing wash basin white vitreous china wash basin of size 630x450mm with pedestal completel recessed at the back for reception of pipes and fittings including C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps. Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. Bottle trap 38 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 263 gms an all complete including necessary fittings and fixtures etc., all complete as directed by Engineer-in-Charge. 2.00 Nos 4422.23 Rupees Four Thousand Four Hundred Twenty Two and Twenty Two Paise Only 8844.45
26 Providing and fixing C.P. brass stop cock (concealed) 15 mm nominal bore of standard design and of approved make conforming to IS:8931 etc., all complete as directed by Engineer-in-Charge. 2.00 Nos 629.77 Rupees Six Hundred Twenty Nine and Seventy Seven Paise Only 1259.55
27 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. 0.00
a) 15 mm nominal dia Pipes 4.00 Rm 269.40 Rupees Two Hundred Sixty Nine and Thirty Nine Paise Only 1077.60
b) 20 mm nominal dia Pipes 3.00 Rm 314.68 Rupees Three Hundred Fourteen and Sixty Seven Paise Only 944.03
28 Providing and fixing on wall face unplasticised rigid PVC rain water pipes conforming to IS: 13592 type A inclduing jointing with seal ring conforming to IS 5382 leaving 10mm gap for thermal expansion single socketed pipes etc., all complete as directed by Engineer-in-Charge. 0.00
a) 75 mm dia 15.00 Rm 233.71 Rupees Two Hundred Thirty Three and Seventy Paise Only 3505.58
b) 110mm dia for floors 6.00 Rm 354.50 Rupees Three Hundred Fifty Four and Fifty Paise Only 2127.02
c) 110mm dia rain water pipes 40.00 Rm 348.77 Rupees Three Hundred Forty Eight and Seventy Seven Paise Only 13950.94
d) Coupler - 75 mm dia 4.00 Nos 86.14 Rupees Eighty Six and Thirteen Paise Only 344.55
e) Coupler -110 mm dia 4.00 Nos 127.89 Rupees One Hundred Twenty Seven and Eighty Eight Paise Only 511.56
f) Single T with door- 75mm dia 4.00 Nos 154.24 Rupees One Hundred Fifty Four and Twenty Three Paise Only 616.95
g) Single T with door 110mm dia 3.00 Nos 219.94 Rupees Two Hundred Nineteen and Ninety Four Paise Only 659.83
h) Bend -75 mm dia 6.00 Nos 99.48 Rupees Ninety Nine and Forty Seven Paise Only 596.85
i) Bend -110 mm dia 6.00 Nos 141.23 Rupees One Hundred Forty One and Twenty Two Paise Only 847.37
j) Shoe-110mm dia 4.00 Nos 123.85 Rupees One Hundred Twenty Three and Eighty Five Paise Only 495.40
29 Providing and fixing C.P. brass long nose bib cock 15 mm nominal bore of approved quality conforming to IS standards and weighing not less than 810 gms etc., all complete as directed by Engineer-in-Charge. 2.00 Nos 770.91 Rupees Seven Hundred Seventy and Ninety Paise Only 1541.82
30 Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms etc., all complete as directed by Engineer-in-Charge. 2.00 Nos 104.69 Rupees One Hundred Four and Sixty Eight Paise Only 209.38
31 Providing and fixing PTMT towel ring complete wih brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour of 600mm long towel rail with total length of 645mm, width 78mm and effective height of 88mm weighing not less than 190gms etc., all complete as directed by Engineer-in-Charge. 2.00 Nos 665.94 Rupees Six Hundred Sixty Five and Ninety Three Paise Only 1331.88
32 Providing and fixing mirror of superior glass (of approved quality) Oval shape 450x350 mm (outer dimensions and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing etc., all complete as directed by Engineer-in-Charge. 2.00 Nos 1293.55 Rupees One Thousand Two Hundred Ninety Three and Fifty Five Paise Only 2587.10
33 Providing and Fixing factory made PVC door frame made of PVC extruded sections of size 75 mm x 53 mm, having wall thickness 2.0 mm (± 0.2 mm). Both verticalssides of the frame reinforced with PVC profile of cross section size 28 mm x 30 mm x 2 mm thickness (± 0.2 mm) and 75 mm x 200 mm long, including reinforcing both ends of the top frame with PVC profile. PVC Door Frame and PVC reinforcement profile to be mitred cut, jointed and fusion welded together, including providing and fixing 3 nos of 125 mm long stainless steel hinges to frame, fixing the frame with jamb with required nos & sizes of anchor dash fastener, all complete as per manufacturer's specification and direction of engineer- in-charge. 10.00 Rm 717.51 Rupees Seven Hundred Seventeen and Fifty Paise Only 7175.08
34 Providing and fixing 37 mm thick factory made PVC Door shutter, styles and rails made of PVC hollow extruded printed and laminated section having overall dimension 115 mm x 37 mm with wall thickness 2 mm (± 0.2 mm) with inbuilt beading on one side, the styles and rails mitred cut and joint at corners by inserting 2 nos PVC profile reinforcement of size 75 mm x 200 mm long with cross section size of 28 mm x 30 mm having wall thickness 2 mm (± 0.2 mm). Styles, rails and reinforcements to be fusion welded together. Only hinge side vertical style to be reinforced with PVC profile reinforcement in full length. Printed and laminated PVC lock rail of size 110 mm x 37 mm having wall thickness 2 mm (± 0.2 mm) to be welded horizontally with the vertical styles after inserting PVC profile reinforcement as in styles and rails, providing with PVC snap fit beading, panels of 100 x20 mm printed & laminated and inserting 2 nos 6 mm dia bright steel rod horizontally with both side threaded and tightened with check nuts and washers complete, all as per manufacturer's specification and direction of engineer-in-charge. 3.15 Smtrs 4097.36 Rupees Four Thousand Ninety Seven and Thirty Five Paise Only 12906.68
35 Providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws, 100x70x4 mm (ordinary type) etc., all complete as directed by Engineer-in-Charge. 6.00 Each 139.73 Rupees One Hundred Thirty Nine and Seventy Two Paise Only 838.35
36 Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws, (Copper oxidized as per IS 1378) 250 x 16mm etc., all complete as directed by Engineer-in-Charge. 2.00 Each 181.95 Rupees One Hundred Eighty One and Ninety Four Paise Only 363.90
37 Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws, (Copper oxidized as per IS : 1378) 150 x 10mm etc., all complete as directed by Engineer-in-Charge. 2.00 Each 55.84 Rupees Fifty Five and Eighty Four Paise Only 111.69
38 Providing and fixing aluminium handles 125 mm, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc., all complete as directed by Engineer-in-Charge. 4.00 Each 62.23 Rupees Sixty Two and Twenty Three Paise Only 248.92
39 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). 250.00 Kgs 725.54 Rupees Seven Hundred Twenty Five and Fifty Three Paise Only 181384.72
40 Providing and fixing Second Class Teak wood for frames of doors, windows, hand rails, frame work for partitions in etc cut to shape and required curvature and preparing the surfaces to receive the polishing fixed in position with hold fast lugs/with dash fasteners of required dia & length/SS Screws at all heights,with necessary moisture content test.complete as per direction of Engineer-in-charge. (Fastners/hold fasts/SS Screws to be paid separately) 3.00 Cum 134277.01 Rupees One Lakh Thirty Four Thousand Two Hundred Seventy Seven and One Paise Only 402831.04
41 Providing and fixing 12mm thick commercial ply conforming to IS : 1328 BWR type. plain lining with necessary screws/nuts & bolts/ nails, including a coat of approved primer on one face, and fixed on wooden /steel frame work/Plastered surfaces etc., complete as per direction of Engineer-in-charge (Frame work shall be paid for separately). 176.00 Sqm 1150.35 Rupees One Thousand One Hundred Fifty and Thirty Five Paise Only 202461.79
42 Providing & Fixing decorative high pressure 1.0mm thick laminated sheet of plain / wood grain in gloss / matt/ suede finish to required pattern and combination as per the drawings etc on plywood with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality/brand complete as per direction of Engineer-in-charge. 86.00 Sqm 842.86 Rupees Eight Hundred Forty Two and Eighty Six Paise Only 72486.07
43 Providing and fixing 35mm thick flush door shutters conforming to IS :2202 (Part I) non-decorative type of approved brand/make, core of block board construction with frame of 1st class hard wood & lipping with 2nd class teak wood battens 25 mm minimum depth on all edges and well matched commercial 3ply veneering with vertical grains or cross bands including ISI marked Stainless Steel butt hinges with necessary screws and face veneers on both faces of shutters and making rectangular vision panel of 0.1sqm with 6 mm thick clear heat strengthened glass.complete as per direction of Engineer-in-charge. 8.40 Sqm 2931.79 Rupees Two Thousand Nine Hundred Thirty One and Seventy Nine Paise Only 24627.05
44 Providing and fixing panelling 5.0 mm thick glass panes (weight not less than 12.50 kg/sqm) or glazing in panelled or glazed shutters 25 mm to 40 mm thick for doors, windows and clerestory windows/ventilators (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured) all as per the instructions of Engineer-In-charge. 1.50 Sq.m 2442.68 Rupees Two Thousand Four Hundred Forty Two and Sixty Eight Paise Only 3664.02
45 Providing and fixing bright finished brass handles of 125mm size with screws etc., all complete as directed by Engineer-in-Charge. 8.00 Nos 241.08 Rupees Two Hundred Forty One and Seven Paise Only 1928.63
46 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws etc., all complete as directed by Engineer-in-Charge. 4.00 Nos 114.27 Rupees One Hundred Fourteen and Twenty Six Paise Only 457.08
47 Providing and fixing bright finished brass tower bolts of 250x10mm (barrel type) with necessary screws etc., all complete as directed by Engineer-in-Charge. 8.00 Nos 414.81 Rupees Four Hundred Fourteen and Eighty Paise Only 3318.47
48 Providing and fixing bright finished brass 100 mm mortice latch and lock with min. 4levers and a pair of lever handles of approved quality with necessary screws etc., all complete as directed by Engineer-in-Charge. 6.00 Nos 802.80 Rupees Eight Hundred Two and Seventy Nine Paise Only 4816.79
49 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc., all complete as directed by Engineer-in-Charge. 4.00 Nos 1056.61 Rupees One Thousand Fifty Six and Sixty Paise Only 4226.42
50 Providing and fixing aluminium sliding door bolts(aldrop) of 250 x16mm , ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc., all complete as directed by Engineer-in-Charge. 3.00 Nos 244.79 Rupees Two Hundred Forty Four and Seventy Eight Paise Only 734.37
51 Providing and fixing 20mm dia chromium plated brass curtain rod /Towel rail of 600mm long having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary etc., all complete as directed by Engineer-in-Charge. 1.00 Nos 221.64 Rupees Two Hundred Twenty One and Sixty Three Paise Only 221.64
52 Providing and fixing 25mm dia chromium plated brass curtain rod and brackets for Window of minumum 2mtr length having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary etc., all complete as directed by Engineer-in-Charge. 4.00 Nos 1004.24 Rupees One Thousand Four and Twenty Three Paise Only 4016.95
53 Providing and fixing FALSE CEILING with 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks of approved brand) at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, 70.00 Sq.m 1273.54 Rupees One Thousand Two Hundred Seventy Three and Fifty Four Paise Only 89148.10
including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer’s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting.
54 Providing and fixing bright finished brass hard drawn hooks(coat hooks) and eyes of 300mm size complete as per direction of Engineer-in-charge. 2.00 Nos 95.67 Rupees Ninety Five and Sixty Seven Paise Only 191.34
55 Supply and fixing wall Paneling with 12mm thick ply on pine wood frame of size 50mm x 50mm placed at 600mm c/c filling the frame with 50-75mm thick material(wool/bed) in panes and covering the pane area with spreading designer fabric cloth/leatherite cover over it using steel button screws or pin headed buttons to the required shape/pattern as per drawing & as instructed by Engineer-In-charge. Note: 1.Cost of fabric/leatheraite should not be less than Rs 3000/sqmt. 2.The fabric/leatherite will be selected by architect. 110.00 Sq.m 4745.76 Rupees Four Thousand Seven Hundred Forty Five and Seventy Six Paise Only 522033.90
56 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required etc., all complete as directed by Engineer-in-Charge. 25.00 Sq.m 693.84 Rupees Six Hundred Ninety Three and Eighty Three Paise Only 17345.91
57 Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge. Note - Item to be applicable in urban areas having directions for restricted hours for movement/ plying of load carrying motor vehicle of 3.5 cum or more 20.00 Cum 464.12 Rupees Four Hundred Sixty Four and Twelve Paise Only 9282.46
58 Providing and laying of 75mm thick compacted bed of dry brick aggregate of 40mm thick nominal size including spreading, well ramming, consolidating and grouting with ajamuna sand , including finishing smooth etc., all complete as directed by Engineer-in-Charge. 110.00 Sq.m 187.26 Rupees One Hundred Eighty Seven and Twenty Five Paise Only 20598.11
59 Supplying and providing of Brick work with common burnt clay F.P.S non modualr bricks of class designation of 7.5 in superstructure above plinth level up to floor five level in cement mortar 1:4 (1 cement : 6 coarse sand) etc., all complete as directed by Engineer-in-Charge. 1.50 Cum 8777.43 Rupees Eight Thousand Seven Hundred Seventy Seven and Forty Three Paise Only 13166.15
60 Providing & fixing horizontal level suspended ceiling comprising of Knauf Vertical Linear Baffle Ceiling made out of Aluminum Extrusion in Aluminum alloy grade 6063 T5. The baffle blade shall be in size of 100x25x3600mm in powder coated to Woodgrain/Plain finish (Red Oak, Cherry, Black / White). The baffle shall be electrostatically polyester powder coated to a coating thickness of 60-80 micron. The powder coating shall pass Salt Spray Test for 750 Hours as per ASTM B117, QUV –A Test for 1000hours as per ASTM G-154 – (Cycle – 1) and Humidity test for 1000hours as per DIN 50017. The powder coating shall have an adhesion of GT0 as per EN ISO 2409. The shade variation within a manufacturing batch shall be delta E<1 using Excite/BYK Gardner instrument and gloss level 25±5% at 60˚ as per ASTM D523 (Not applicable of Wood Grain Shade). The baffle blade shall be suspended using Slotted U-profile of 20 x 30 x 3700mm (Thk-1.5mm) having slots in module of 25mm to keep baffles at an on-center spacing in multiples of 25mm. Longer lengths of Baffle to be connected by Baffle Joiner and the ends to be fixed with End caps. 60.00 Sq.m 17285.41 Rupees Seventeen Thousand Two Hundred Eighty Five and Forty Paise Only 1037124.41
SUSPENSION: Shall be hanged using baffle hanger from U-profile made of mild steel with powder coating thickness of 60-80 micron. The U – profile to comprise of alternate square & rectangular slots of 6.5x6.5mm & 28x6.5mm respectively on the web for locking the baffle hanger using plugin clip to secure the hanger in perfect position and achieve uniform spacing between baffles. The overall dimension of the U–profile is 20(W) x 30(H) x 3750(L) mm and is rolled form from 1.5mm thick mild steel with a powder coating thickness of 60-80micron. U-Profile to be connected to each other using U–Profile Splice. The U-profile shall be hanged from the true ceiling using threaded rod using a U-Profile hanger.
Installation of U-Grid: The U profile to be suspended at every 1200mm center to center using 6mm threaded rod from the structural soffit using U-profile hanger. U-profile splice to be used to join more than one U profiles of length 3.7M. 1st U-Grid Channel must be no more than 400mm from the perimeter. Installation of Knauf Baffles: Locate the slot for Baffle Hangers in U Profile section at 1200mm centers. Hangers are inserted into the slot, then rotated 90° and fixed into position by tightening the grub screw. Baffle to be lifted into position and hangers engage over lip of U-Grid Channel. Each Hanger to be secured into position by inserting the Locking Clip. When doing continuous installation, Baffles blades are to be connected at ends with Baffle Joiner, which are inserted into the top and bottom slots of the Baffle closed profile for alignment only. The bottom Joiner to be located first and fastened on one side only. The top Joiner to be fitted then and secured with grub screws on one side. Then the two Baffle sections shall be joined and the top Joiner is screw fastened on the 2nd Baffle profile. End Caps to be located by pushing the End Cap tongues into open Baffle slots. Note: MTC of materials to be submitted by agency to HAL.
Sub-Total of Part 'A' - Civil Works (Excluding GST) Rupees Thirty Nine Lakh Fifty Six Thousand Four Hundred Fifty Nine and Ninety Six Paise Only 3956459.96
Part 'B' - Electrical Works
1 Supply and fixing in flush with the false ceiling testing & commissioning of round type recess mounted/surface mounted LED downlighter with aluminium die-cast body, finish with premium white powder coating, wattage not less than 18W LED lighting fixture, lumens efficiency ≥ 100lm/w at luminaire level, and lumens output not less than 1800 lumens, Colour temprature shall be ≥5700K, operating on single phase 230V voltage 50 Hz AC supply with voltage range 140-270V. LM79 certification for luminare & LM80 certificate for LED shall be produced. including control gear, power factor of control gear shall be >0.90. of Crompton model no:LSCSM-18W-CDL /Equivalent model in other approved makes luminaries which meets the above technical specification. LED used in the luminaire should be one of approved make as per approved make list of HAL and as directed by Engineer-in-charge. 28.00 Nos 1445.76 Rupees One Thousand Four Hundred Forty Five and Seventy Six Paise Only 40481.28
2 Supply and fixing in flush with the false ceiling as per site requirement testing & commissioning of round type surface/recess mounted LED downlighter in gypsum/Wooden false ceiling/ceiling with aluminium die-cast body, finish with drop down diffuser with optimized heat sink for efficiant heat dissipation, wattage not less than 3W LED lighting fixture, lumens efficiency ≥ 100lm/w at luminaire level, and lumens output not less than 300 lumens, effficent heat sink, Colour temprature shall be =>5700K, operating on single phase 230V voltage 50 Hz AC supply with voltage range 140-270V. LM 79 certification for luminare & LM80 certificate for LED shall be produced. including control gear, power factor of control gear shall be >0.90. Bajaj make model no:Havells LHEBHDP7IZ1W003 /Equivalent model in other approved makes luminaries which meets the above technical specification. LED used in the luminaire should be one of approved make as per approved make list of HAL. 4.00 Nos 344.07 Rupees Three Hundred Forty Four and Seven Paise Only 1376.28
3 Supply and fixing on existing wall / ceiling, testing & commissioning of surface mounting, Batten type 2X18W/20W T8 LED Tube light (four feet) Luminaries with minimum lumens output Efficacy of minimum 100 lm/W.,and lumens output not less than 2000 lumens comprising of white powder coated CRCA sheet steel housing, operating on single phase 230V 50Hz AC supply, built-in electronic driver, LM 79 certification for luminaire. Other standard accessories including necessary inter-connections and supply of 2 Nos of 18/20W T8 LED Tube, complete in all respects and as directed by engineer-in-chage. Make & model: The LED tube & batten shall be of CROMPTON-IGP161LT8-16 and 2XT8+LT8-20-865-(2) /Equivalent model of approved make luminaries which meets the above technical specification. complete in all respect and as directed by Engineer-in-charge. 5.00 Nos 1705.93 Rupees One Thousand Seven Hundred Five and Ninety Three Paise Only 8529.65
4 Supply & fixing on the building at a height of 5-8mtr approx. including supply and fixing GI pipe bracket made out of 40mm dia class B GI pipe of 1.5Mtrs long bent to shape with necessary fixing hardwares etc., to fix on building and testing & commissioning of building light LED light fixture of wattage not exceeding 70watts and lumens output not less than 8400 lumens with necessary interconnections consisting of pressure die cast aluminum housing, optical cover made out of heat resistance toughened clear glass / polycarbonate with IP66, luminous efficiency ≥120lm/w at luminaries level, operating on single phase 230V 50Hz AC supply, efficient heat sink, colour temperature shall be 5600K+300K, suitable optics for maximizing the spread complete in all respects and as directed by engineer-in-change. The luminaries shall have specific lens for optical dispersion including control gear and power factor of control gear shall be >0.95. LM 79 certification for luminaries & LM80 certificate for LED shall be produced. Any approved make fitting meeting the above technical specification has to be supplied.The LED Light fixture shall be of Crompton model no:CRP-409-70-57-SL-GL-NSG /Equivalent model in other approved makes luminaries which meets the above technical specification. LED used in the luminaire should be one of approved make as per approved make list of HAL. 6.00 Nos 6296.61 Rupees Six Thousand Two Hundred Ninety Six and Sixty One Paise Only 37779.66
5 Supply and fixing on ceiling as per site requirement including testing & commissioning of round type Surface mounted LED downlighter with PDC aluminium housing and high translucent frosted plastic diffucer makes it a robust luminaire, wattage not exceeding 12W LED lighting fixture, lumens efficiency ≥ 100lm/w at luminaire level, and lumens output not less than 1200 lumens, effficent heat sink, Colour temprature shall be ≥5700K, operating on single phase 230V voltage 50 Hz AC supply with voltage range 140-270V. 79 certification for luminare & LM80 certificate for LED shall be produced. including control gear, power factor of control gear shall be >0.90. Crompton model no:LCDSPLN-S-12-CDL/Equivalent model in other approved makes luminaries which meets the above technical specification. LED used in the luminaire should be one of approved make as per approved make list of HAL. 4.00 Nos 1322.88 Rupees One Thousand Three Hundred Twenty Two and Eighty Eight Paise Only 5291.52
6 Supply and fixing on wall/wooden wall/granite clading by using suitable fixing hardwares, testing & commissioning of decorative type 10W UP-down LED light fitting with lumen output of 850lumens similar to philips 582009/equivalent in any approved makes with operating on single phase 230V voltage 50 Hz AC supply with voltage range 140-270V including driver with necessary interconnections between driver and lighting fixtures complete in all respect and as directed by EIC. 6.00 Nos 5951.69 Rupees Five Thousand Nine Hundred Fifty One and Sixty Nine Paise Only 35710.14
7 Supply, fixing directly to the ceiling/wall/Floor using suitable mounting arrangements testing & commissioning of 28W, 2400 Lumens for 5 meter with suitable 1no driver for each 5mtrs length of LED strip having reliable performance and anti-dust LED strips with professional design for Decorative lighting applications(Cove lighting) and Colour temperature shall be =>3000K, operating on single phase 230V voltage 50 Hz AC supply with voltage range 140-270V including necessary interconnections between driver and lighting fixtures complete in all respect and as directed by EIC. The lighting fixture shall be model no: Philips Linea Bright Cove light or Equivalent make in other approved makes. 200.00 Mtrs 434.75 Rupees Four Hundred Thirty Four and Seventy Five Paise Only 86950.00
8 Supply, fixing using suitable mounting accessories testing & commissioning of 28 W driver 220V-240V Power supply with all accessories complete in all respect and as directed by EIC. The Driver shall be of Philips or Equivalent make in other approved makes. Extra Driver is used for Philips Linea Bright Premium Cove light at BOQ sl no-7 as per site requirement. 40.00 Nos 586.44 Rupees Five Hundred Eighty Six and Forty Four Paise Only 23457.60
9 Supply, installation, testing & commissioning of 300mm dia 900 rpm heavy duty exhaust fan of any approved make with louvers, connecting cord with 6A, 3 pin plug top and with all necessary accessories, including making wall openings and replastering to smooth finish with matching paint etc., complete in all respects and as directed by Engineer-in-charge. 2.00 Nos 4731.36 Rupees Four Thousand Seven Hundred Thirty One and Thirty Six Paise Only 9462.72
10 DB & MCB'S, PANELS
Supply, fixing, testing & commissioning of the following factory built powder coated Double door MCB/MCCB DB of any approved make fabricated out of M.S. sheet steel enclosure & necessary cutouts for operating the MCB knobs & comprising of 200 amps tinned copper busbars & earthing bus with tapped holes including internal wiring with stranded copper PVC wires or suitable size copper strips etc. & fixing the DB in flush with wall/ on wall as per site requirement with necessary M.S. angle supports, chipping the wall and replastering to smooth finish etc., wherever required as per site condition, complete in all respects, as directed by Engineer-in-charge and comprising the following as detailed below:
a) 6 way(4+18) , Double door Horizontal MCB DB 1.00 No 4980.80 Rupees Four Thousand Nine Hundred Eighty and Eighty Paise Only 4980.80
b) 8 way (4+24) Double door VTPN MCCB DB 1.00 No 10178.89 Rupees Ten Thousand One Hundred Seventy Eight and Eighty Nine Paise Only 10178.89
c) 100 A, 415V 16KA, TP MCCB 1.00 No 3782.16 Rupees Three Thousand Seven Hundred Eighty Two and Sixteen Paise Only 3782.16
d) 63 amps. ratings , 4P MCB, "C" curve, 10 KA breaking capacity. 1.00 No 2705.08 Rupees Two Thousand Seven Hundred Five and Eight Paise Only 2705.08
e) Supply and fixing 6A to 32 A rating, TP 415 V 10kA, "C" curve, miniature circuit bracker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc., as required. 2.00 Nos 1008.38 Rupees One Thousand Eight and Thirty Eight Paise Only 2016.76
f) Supply and fixing 6A to 32 A rating, SP 214V 10kA, "C" curve, miniature circuit bracker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc., as required. 36.00 Nos 256.35 Rupees Two Hundred Fifty Six and Thirty Five Paise Only 9228.60
11 Supplying and fixing DP sheet steel enclosure on surface / recess along with 32A 240V C curve DP MCB complete with connections, testing and commissioning etc. as required. 1.00 No 1170.60 Rupees One Thousand One Hundred Seventy and Sixty Paise Only 1170.60
12 Lighting Point wiring
Wiring for light point / fan point / exhaust fan point/call bell point from nearest switch box with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, fan regulator, modular plate, suitable GI box and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required. (as per detailed CPWD specifications for Group C wiring).
a) Wiring to single light point controlled by 1 No 6A, 250V gr. flush type modular SP switch complete in all respects. 23.00 Pts 1469.00 Rupees One Thousand Four Hundred Sixty Nine Only 33787.00
b) Wiring to two light point controlled by 1 No 6A, 250V gr. flush type modular SP switch complete in all respects. 12.00 Pts 2328.18 Rupees Two Thousand Three Hundred Twenty Eight and Eighteen Paise Only 27938.16
c) Wiring to exhaust/wall mounting fan point using 6A, 250V gr. flush type modular SP switch housed along with other lighting switches/separate switch box if required and 3pin 6A, 250V gr. modular type socket housed near the exhaust fan complete in all respects. 2.00 Pts 1469.00 Rupees One Thousand Four Hundred Sixty Nine Only 2938.00
Wiring for Power Points(6A & 16A power sockets)
13 Supplying and fixing following suitable size GI Box with modular plate and cover on front on surface or in recess, including providing and fixing 3 pin 5/6A modular socket outlet and 5/6 A modular switch, connections etc., as required.modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 15.00 Nos 477.65 Rupees Four Hundred Seventy Seven and Sixty Five Paise Only 7164.75
14 Supplying and fixing following suitable size GI Box with modular plate and cover on front on surface or in recess, including providing and fixing 6 pin 5/6A & 15/16A modular socket outlet and 15/16 A modular switch, connections etc., as required. 12.00 Nos 586.81 Rupees Five Hundred Eighty Six and Eighty One Paise Only 7041.72
15 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.
a) 2 x 1.5 sq. mm + 1 x 1.5 sq. mm earth wire 50.00 Mtrs 233.32 Rupees Two Hundred Thirty Three and Thirty Two Paise Only 11666.00
b) 2 x 4 sq. mm + 1 x 4 sq. mm earth wire 200.00 Mtrs 334.46 Rupees Three Hundred Thirty Four and Forty Six Paise Only 66892.00
c) 4 x 10 sq. mm + 2 x 6 sq. mm earth wire 5.00 Mtrs 1006.37 Rupees One Thousand Six and Thirty Seven Paise Only 5031.85
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. As required.
a) Supply & fixing of Twin RJ 11 Telephone jack 1.00 No 148.20 Rupees One Hundred Forty Eight and Twenty Paise Only 148.20
b) Supplying and drawing 4 pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required. 60.00 Mtrs 54.07 Rupees Fifty Four and Seven Paise Only 3244.20
17 Supply & fixing in flush with wall/on Aluminium partition as per site condition, testing & Commissioning of 2nos of 1 Module RJ-45 sockets for Two numbers of Data points including supply of suitable size modular type MS concealed/open mounting box with base plates, front covers, etc., with necessary interconnections and chipping the wall, replastering to smooth finish etc., wherever required complete as directed by Engineer-in-charge. 1.00 No 1361.86 Rupees One Thousand Three Hundred Sixty One and Eighty Six Paise Only 1361.86
18 Supply, drawing of Cat 6 UTP Cable in the existing conduit/casing & caping/LDP trunking etc., complete in all respect and as directed by Engineer-in-charge. 60.00 Mtrs 57.08 Rupees Fifty Seven and Eight Paise Only 3424.80
19 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
a) 20MM PVC Conduit 150.00 Mtrs 128.18 Rupees One Hundred Twenty Eight and Eighteen Paise Only 19227.00
20 Supplying and fixing following size modules, GI box alongwith Modular base & cover plate for modular switches in recess etc. as required.
a) 1 or 2 Module 2.00 Nos 298.41 Rupees Two Hundred Ninety Eight and Forty One Paise Only 596.82
21 Supply and fixing on wall/ partition wall using necessary mounting arrangements for 105x50mm size DLP PVC adaptable trunking system with full top cover, necessary finishing such as end caps, flat angle, T joints, external/internal angle, flat junction, Body joint, cover joint, required cabling accessories etc., complete in all respects as directed by Engineer-in-charge. 30.00 Mtrs 1644.07 Rupees One Thousand Six Hundred Forty Four and Seven Paise Only 49322.10
22 Supplying of following size and conductor XLPE insulated armoured power cable of 1.1 KV grade confirming to IS: 7098 ( part-I)/1998 with upto date amendment including stacking at site, proper storage complete etc. as required
22 Supply & laying in the already excavated cable trench/fixing on wall/duct wall with necessary M.S clamps / encasing in pipes etc., testing & commissioning of 3.5Cx50 Sqmm XLPE insulated Aluminium conductor 1100V gr. Armoured U.G cables confirming to IS: 7098 ( part-I)/1998 complete with all necessary consumables as directed and as per technical specification. (Note:- Excavation, sand & Brick Protection, concrete cutting, reconcreting, casing pipes will be measured separately.) 75.00 Mtrs 581.50 Rupees Five Hundred Eighty One and Fifty Paise Only 43612.50
23 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required
a) 3.5C x 50 Sqmm.Al Arm LT cable. 2.00 Nos 413.57 Rupees Four Hundred Thirteen and Fifty Seven Paise Only 827.14
24 Supplying and installing following size of perforated painted with powder coating M.S. cable trays with Cover &perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.
a) Cable tray 200 mm width X 50 mm depth X 1.6 mm thickness With Cover 25.00 Mtrs 689.94 Rupees Six Hundred Eighty Nine and Ninety Four Paise Only 17248.50
a) Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required complete in all respect as directed by EIC and as per technical specification. 1.00 No 7482.21 Rupees Seven Thousand Four Hundred Eighty Two and Twenty One Paise Only 7482.21
b) Supplying & laying 25 mm X 5 mm GI strip at 0.50 metre below ground as strip earth electrode, including connection/terminating with G.I nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of GI nut bolt & spring washer spaced at 50mm) 30.00 Mtrs 144.19 Rupees One Hundred Forty Four and Nineteen Paise Only 4325.70
26 Supplying and stacking of 2 CX 6 Sqmm Copper Un armoured XLPE insulated cable confirming to IS: 7098 ( part-I)/1998. 20.00 Mtrs 300.00 Rupees Three Hundred Only 6000.00
27 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of size upto 35Sqmm in the existing masonry open duct as required. 30.00 Mtrs 28.03 Rupees Twenty Eight and Three Paise Only 840.90
28 Removal, refixing, testing and commissioning of 2Ton split Airconditioning systems 4.00 Sets 4500.00 Rupees Four Thousand Five Hundred Only 18000.00
Sub-Total of Part 'B' - Electrical Works (Excluding GST) Rupees Six Lakh Twenty One Thousand Two Hundred Twenty Three and Fifteen Paise Only 621223.15
29 Part II B: Audio Video Integration
a) Supply of 98” 4K Interactive Panel with the following specifications ● 350nits ● Touch ● Android 12 ● 4GB RAM ● 3GB ROM ● 16x7 ● 1200:1 Make: People link/LG/Sony/Panasonic/logic/equivalent 1.00 Set 575000.00 Rupees Five Lakh Seventy Five Thousand Only 575000.00
b) Supply of ePodium Ultra with the following specifications ● Metallic Body with Top Sliding Mechanism ● Visualizer Tray ● Rack for Equipment's ● 21.5 inches Touch Screen Monitor ● Laptop Interface with inbuilt switcher ● Gooseneck Mic(1no), Wireless lapel Mic(1no) and handheld mic(3nos), ● 200 Watts Amplifier, ● Speaker Pair ● Central Control System with button pad projector, screen, Audio video control Make: People link epodium ultra link 200/logic/EIS touch/Globus/pentagon/equivalent 1.00 No 263010.17 Rupees Two Lakh Sixty Three Thousand Ten and Seventeen Paise Only 263010.17
c) Supply of 200W Amplifier with the following specifications • 100*2 Watts Class D Mixer Amplifier with Bass,treble Equalizer • 2 Balance Phantom Microphone Inputs with XLR • 1 Unbalanced Microphone Phono Input • RS232 connection for controller Make: People link/Bosch/Honeywell/yamaha/ shure/ bose/equivalent 1.00 Set 37400.00 Rupees Thirty Seven Thousand Four Hundred Only 37400.00
d) Supply of Passive 5" Wall mount Speakers(1Pair=2speakers). Make: People link/Bosch/Honeywell/yamaha/ shure/ bose/equivalent 3.00 Pairs 22000.00 Rupees Twenty Two Thousand Only 66000.00
e) Supply, Installation, testing and commissioning of High-end PC with i5-12th Gen Processor/Win 11 Pro 64-bit OS/8GB RAM/500 GB SSD including suitable Graphics Incl. complete in all respects and as directed by Engineer-in-charge. Make: Dell/ HP/ Lenovo 1.00 Set 72000.00 Rupees Seventy Two Thousand Only 72000.00
f) Supply of PTZ camera with the following specifications *1/2.7” high quality, 2MP sensor * 1920x1080 @ 60fps (uncompressed) * 30x Optical Zoom * 8x Digital Zoom * 60.7° Field of View * 255 Presets * HDMI, RJ45,3G-SDI, USB 2.0 (Recording) Make: People link/canon/sony/equivalent 1.00 Set 195000.00 Rupees One Lakh Ninety Five Thousand Only 195000.00
g Supply of HDMI, USB3.0, USB2.0 cables, CAT6 cables and audio cables required to integrate and commission the AV system(Part II B) in total as directed by E-I-C. Approved Makes: Belden/MX/Kramer/Extron 1.00 Lot 35000.00 Rupees Thirty Five Thousand Only 35000.00
h Installation/laying/fixing, testing of above items(29.a to 29.g) and commissioning AV system in total and training to HAL personnel for operation as directed by Engineer-in-Charge. 1.00 No 50000.00 Rupees Fifty Thousand Only 50000.00
Sub-Total of Part 'IIB' - Electrical Works (Excluding GST) Rupees Twelve Lakh Ninety Three Thousand Four Hundred Ten and Seventeen Paise Only 1293410.17
Total (Excluding GST) Rupees Fifty Eight Lakh Seventy One Thousand Ninety Three and Twenty Eight Paise Only 5871093.28
The Tenderer has to Quote Percentage Above / Below as Specified and Percentage Shall be Quoted in Figures. Approximate Amount Put to Tender State Above or Below Percentage in Figures [Excluding GST] Amount
Tenderer's Quote (Excluding GST) 5871093.28 BELOW % 5871093.28
Add 18% GST Rupees Ten Lakh Fifty Six Thousand Seven Hundred Ninety Six and Seventy Nine Paise Only 1056796.79
Grand Total (Including GST) Rupees Sixty Nine Lakh Twenty Seven Thousand Eight Hundred Ninety and Seven Paise Only 6927890.07
Note: The tenderer has to quote percentage above / below against the total amount considering the specified standard rates. If the contractor does not quote any percentage above / below on the total amount, the tender shall be treated as invalid and will not be considered.
WARNING: PLEASE ENTER PERCENTAGE QUOTE
HINDUSTAN AERONAUTICS LIMITED
Facilities Management Division
Pre-Qulification Profile (To Be uploaded along with Part A)
Tender Ref No. or Contract No.: HAL/FMD/R-41/24-25
Name of Work: Providing Face-lifting Works to Existing Dhanvantri Hall at IHC including Electrical Works, HAL [Bangalore].
Estimated Amount in Rs.: 6930000
Tender Notice Date : 10.08.2024
PROVISIONAL GST ID NO. for HAL 29AAACH3641R1Z3
Sl.No Description Details Enclosed / Not Enclosed Remarks
1 Name of the Individual / Firm / Company: * Mandatory Please Enter Name of the Individual/firm/company
2 Type of ownership PlsEnter Type of Ownership
If Other, please specify
3 Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc., Pls enter Details of Constitution
4 Address for correspondence: Pls Enter Address
5 (a) PAN No.: Pls Enter Pan NO
5 (b) Service Tax Registration No
5 (c ) Goods and Service Tax ID No.
6 Contact details
Contact person name Please Enter Contact person Name
Mobile No. Pls Enter Mobile No
Ph. No. with STD code
FAX No. with STD code 2 #N/A
7 Registered Contractor
If Registered Contractor with HAL Yes/ No Related Document to be Uploaded to eProcurement Portal * Category: E= 75 Lakhs - Lessthan= 100Lakhs F= 50Lakhs - Lessthan 75 Lakhs G = 25Lakhs - Lessthan 50 Lakhs H = 10Lakhs - Lessthan 25 Lakhs I = 5Lakhs - Lessthan 10 Lakhs J = 2Lakhs - Lessthan 5 Lakhs K = Lessthan 2Lakhs 0 7 E 1
Registration No. 199999 7 F 2
Category 200000 6 G 3
PEMD Amount ( If paid ) 499999 6 H 4
8 I.T Returns for past 03 years 999999 5 J 6
2023-24 Pls Select 'Yes' ' No' for IT Return for All Three years 1000000 4 K 7
9 Average annual financial turn over during the last 3 years, ending 31st March 2023 of the previous financial year [ should not be less than 30% of Amount put to tender] 4999999 3
YEAR TURN OVER IN Rs. Enclosed / Not Enclosed REMARKS 5000000 2
2022- 2023 Rs. Pls Enter Turn over in Rupees for all the 3 years 7499999 2
Average annual Financial turn over 0.00 2079000.00
Avg Annual Turnover criteria is not met 10000000 1
10 ESI & PF Nos with proof Nos Enclosed / Not Enclosed
ESI Registration No/. with proof if any Remarks if any
PF Registration No. with proof if any
11 Bank(s) details: [Copy of the cheque leaf to be uploaded]
Bank Account No. Related Document to be Uploaded to eProcurement Portal (Note Canceled cheque leaf to be uploaded)
Name of the Bank
Type of Account
12 Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued NOT before 12 months from the last date of Tender submission solvency cal
Name of Bank & Branch Pls Enter Details to 'Name of the Bank' , 'Date of Issue','Value in Rs #REF! 28-Jun 0 40000
Date of Issue 200000 40000
Value in Rs. 200001 150000
Solvency value is NOT as per NIT
13 Experience of having successfully completed similar works during last 7 years ending last day of previous month. [Latest work experience certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost. (iii) ONE similar completed work each costing not less than the amount equal to 80% of Amount put to the tender. 2772000 500001 250000
Completed similar works during last 7 years Pls Select %of similar works completed during last 7 years 1000000 250000
Work NoI Type of Work: [ Incase of private works the same shall be supported with TDS certificate] Related Document to be Uploaded to eProcurement Portal 1000001 500000
Brief Description of Work: Please enter Details for Work No 1 2000000 500000
Completed value of Work in Rs. 2000001 1000000
Date of Commencement of Work 4000000 1000000
Date of Actual Completion of Work: 4000001 2000000
Work No II Type of Work: [ Incase of private works the same shall be supported with TDS certificate] Related Document to be Uploaded to eProcurement Portal 10000000 2000000
Brief Description of Work: Pls Enter Details for Work No II
Completed value of Work in Rs.
Date of Commencement of Work:
Date of Actual Completion of Work: work done
Work No III Type of Work: [ Incase of private works the same shall be supported with TDS certificate] Related Document to be Uploaded to eProcurement Portal #REF! 2555
Brief Description of Work: Pls Enter Details for Work No III #REF!
Completed value of Work in Rs.
Date of Commencement of Work:
Date of Actual Completion of Work:
14 Details of person holding the power of Attorney (If different from contact person)
Name Related Document to be Uploaded to eProcurement Portal
Mobile No. Pls Enter Details for Person holding Power of Attorney
Ph. No. with STD code
FAX No. with STD code
15 DECLARATION I
The document being viewed / downloaded from the website and having read & understood all the contents of the tender document mentioned under terms and conditions including price bid do hereby accept all the terms and conditions laid down in the said Tender document and will abide by the same on acceptance and ward of work.
16 DECLARATION II
I/We declare and confirm that - 1. All information and attachments submitted along with this offer are true and correct. 2. I/We are aware that any false information provided herein will result in the rejection of my offer. 3. I/We shall not make refund claims of expenditure incurred in processing this offer. 4. I / We aware that document sought only be uploaded for evaluation of offer. Pls Accept the Delaration II
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
raw.json
RAW_JSON
TN23.pdf
TENDER_DOCUMENT • 2.26 MB
41PQ.pdf
TENDER_DOCUMENT • 0.21 MB
ElectricalTenderDrawing.pdf
TENDER_DOCUMENT • 0.51 MB
41ECSForm.pdf
TENDER_DOCUMENT • 0.46 MB
41PBF.xlsm
TENDER_DOCUMENT • 0.07 MB
41PB.pdf
TENDER_DOCUMENT • 0.43 MB
41PQF.xlsm
TENDER_DOCUMENT • 0.03 MB
41Checklist.pdf
TENDER_DOCUMENT • 0.17 MB
41TB.pdf
TENDER_DOCUMENT • 3.28 MB
TenderDrawing.pdf
TENDER_DOCUMENT • 0.53 MB
41LayoutDrawing.pdf
TENDER_DOCUMENT • 0.57 MB
41Undertaking.pdf
TENDER_DOCUMENT • 0.55 MB
Amendment.pdf
TENDER_DOCUMENT • 0.09 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .