Repair Replacement of Parts to DRR 630 W DRR-406 W VMT 860 and Back Hoe loader CASE 01934

DRR-630 W Periodical servicing of the machine by way of draining engine oil, replacing engine oil 15 ltr 20w40 P/F of fuel filter- primary -01 no, Secondary-01 set, diesel pipe -01 no, return pipe-01, air filter assembly-01no engine oil filter -01 no top up gear oil 10 ltr coolent 5 ltr greasing all moving parts fan belt -01 The job includes cost of material, labour charges and all taxes.

DRR-630 W Repair to the clutch system of the machine by way of dismantling completely the clutch unit from the m/c, cleaning with diesel, removing of old damaged parts then P/F of plate driving (306-3-1)-02 nos, lever (306-3-4)-06 nos, pin for lever (306-3-5)-06 nos, link lever (306-3-6)-12 nos, in place of worn out parts. The job includes cost of material, labour charges and all taxes.

DRR-630 W Repairs to front wheels by dismantling completely, checking of parts, removing of old damaged parts then P/F of bush inner (307-2-2)-02Nos, bush outer (307-2-3)-02Nos, and grinding the inner and outer dia. on lathe machine 04 no's. Ring (307-2-4)-01No, stiffener (307-25)- 01No, bolt (B-1-011)-12Nos. in place of worn out parts. The job includes cost of material and labour charges and all Taxes.

DRR-630 W Repair to the rear wheels by dismantling completely, checking of parts, removing of old damaged parts and then P.F of bush inner (308-1-7A)-02Nos, bush outer (308-1-7B)-02Nos. grinding the inner and outer dia. to the required size on lathe machine, peg (308-1-9)-01No, in place of worn-out parts. The job includes cost of material, labour charges and all taxes.

DRR-406W Periodical servicing of the machine by way of draining engine oil, replacing engine oil 15 ltr 20w40 P/F of fuel filter- primary -01 no, Secondary-01 set, diesel pipe -01 no, return pipe-01, air filter assembly-01no engine oil filter -01 no top up gear oil 10 ltr coolent 5 ltr greasing all moving parts fan belt -01 The job includes cost of material, labour charges and all taxes.

DRR-406 W Repair to the clutch system of the machine by way of dismantling completely the clutch unit from the m/c, cleaning with diesel, removing of old damaged parts then P/F of plate driving (306-3-1)-02 nos, lever (306-3-4)-06 nos, pin for lever (306-3-5)-06 nos, link lever (306-3-6)-12 nos, in place of worn out parts. The job includes cost of material, labour charges and all taxes.

DRR-406 W Repair to the rear wheels by dismantling completely, checking of parts, removing of old damaged parts and then P.F of bush inner (308-1-7A)-02Nos, bush outer (308-1-7B)-02Nos. grinding the inner and outer dia. to the required size on lathe machine, peg (308-1-9)-01No, in place of worn-out parts. The job includes cost of material, labour charges and all taxes.

DRR-406 W Repairs to alternator, wiring and charging system of the machine by way of removing of worn out items, and p/f of new items carbon bush set, bearing. Job also includes replacement of defective wiring, complete testing of charging system. Job includes cost of material, labour charges and taxes.

VMT-860 Periodic servicing of VMT by way of replacement of air filter 01 no Oil filter 01 no, fuel filter 2 no primary and secondary, M.oil 10 ltrs, hydraulic filter 1no, air breather filter 1 no engine oil 11 ltr 15w40 and water/fuel strainer 01 no. The job includes labour charges/ service charge at site(mendhar) and all taxes

VMT-860 Repair of articulation/centre joint assembly by way of dismantling and opening of the articulation/centre joint assembly of JCB VMT 860, disconnecting necessary hydraulic hoses/lines and other connected components, providing suitable hydraulic crane/chain block or lifting arrangement for supporting and handling the machine/articulated section, removal of articulation pin and worn-out bushes, cleaning of bush housing and pin, checking pin/housing for wear, fitting and pressing of new bushes, re-fitting articulation pin with required shims/washers, alignment of front and rear frame sections, tightening of fasteners, greasing/lubrication of the joint, reconnection of disconnected components and complete operational testing of steering/articulation system, The job includes labour charges/ service charge at site(mendhar) and all taxes.