Additional Road restoration for B.T Road and Cement concrete road in the pipe cutting portion to the various streets and allied pipe line works, Karaikal Central Zone, Karaikal Part-I II

Amount

Earth work in excavation by mechanical means(Hydraulic Excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5m. including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50m - all kinds of soil.

Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m - all kinds of soil - pipes,cables etc , not exceeding 80mm dia.

Excavating trenches of required width for pipes, cables, etc. including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed within a lead of 50m - all kinds of soil - pipes, cables etc. exceeding 80mm dia. but not exceeding 300mm dia.

Excavating trenches of required width for pipes, cables, etc.including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth including consol idating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed within a lead of 50m -all kinds of soil - pipes, cables etc. exceeding 300mm dia. but not exceeding 600mm dia.

Extra for excavating trenches for pipes, cables etc. in all kinds of soil for depth exceeding 1.5m , but not exceeding 3 m (Rate is over corresponding basic item for depth upto 1.5metre)

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50m and lift upto 1.5m.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plith level - 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plith level - 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size).

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plith level - 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete , excluding the cost of centering , shuttering , finsishing and reinforcement - All work upto plinth level 1:1.5:3 (1cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size).

Providing and laying in position specified grade of reinforced cement concrete , excluding the cost of centering , shuttering , finsishing and reinforcement - All work upto plinth level 1:2:4 (1cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).

Reinforced cement concrete work in walls (any thickness) , including attached pilasters, buttresses , plinth and sting courses , fillets , columns , pillars , piers , abutments , posts and struts etc. upto floor five level excluding cost of centering , shuttering , finishing and reinforcement - 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size).

Reinforced cement concrete work in beams, suspended floors , roofs having slope up to 15degree landings , balconies , shelves , chajjas , lintels , bands , plain window sills , staircases and spiral stair cases upto floor five level excluing the cost of centering , shuttering, finishing and reinforcement , with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size).

Centering and shuttering including strutting, propping etc and removal of form for - foundations, footings, bases of columns etc for mass concrete.

Centering and shuttering including strutting , propping etc and removal of form for - Suspended floors , roofs , landings , balconies and access platform.

Centering and shuttering including strutting , propping etc and removal of form for - Lintels , beams , plinth beams , girders , bressumers and cantilevers.

Centering and shuttering including strutting , propping etc and removal of form for - Columns , Pillars , Piers , Abutments , Posts and Struts.

Providing , hoisting and fixing upto floor five level precast reinforced cement concrete in lintels, beams, and bressumers including setting in cement mortar 1:3 (1 cement : 3 coarse sand) , cost of required centering and shuttering but excluding the cost of reinforcement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C.work including straightening , cutting , bending, placing in position and binding all complete upto plinth level - Thermo -Mechanically treated bars (TISCON / VIZAG / IISCO / SAIL / JSW) Fe - 415 or more.

Steel reinforcement for R.C.C.work including straightening , cutting , bending, placing in position and binding all complete above plinth level - Thermo -Mechanically treated bars (TISCON / VIZAG / IISCO / SAIL / JSW) Fe - 415 or more.

Brick work with common burnt clay F.P.S. (non modular ) bricks of class designation 3.5 in foundation and plinth in - cement mortar 1:6 (1 cement : 6 coarse sand)

Cement concrete flooring 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc .complete - 40mm thick with 20mm nominal size stone aggregate

12 mm cement plaster of mix 1:4 (1 cement :4 course sand)

6mm cement plaster of mix 1:3 (1 cement : 3 fine sand).

Applying one coat of water thinnable cement primer of approved brand and manufacturer on wall surface - water thinnable cement primer.

Wall painting with plastic emulsion paint - Premium of approved brand and manufacture to give an even shade - two or more coats on new work.

Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead - nominal concrete 1:3:6 or richer mix (including equivalent design mix).

Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead - Nominal concrete 1:4:8 or leaner mix (including equivalent design mix).

Dismantling manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead - bituminous road.

Providing and fixing ASTM pipes including all ASTM plain & brass threaded fittings this included jointing of pipes & fittings with one step ASTM solvent cement , trenching refilling & testing of joints complete (External work) - 25 mm nominal outer dia pipes

Boring , providing and installing bored cast -in-situ reinforced cement concrete piles of grade M-25 of specified diameter and length below the pile cap, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring , with bentonite solution and temporary casing of appropriate lenghth for setting out and removal of same and the lenghth of the pile to be embedded in the pile cap etc. all complete , including removal of excavated earth with all lifts and leads (length of pile for payment shall be measured upto bottom of pile cap) - 300 mm dia piles.

Providing flanged joints to double flanged C.I./ D.I. pipes and specials including necessary bolts, nuts, rubber insertion and testing of joints etc., complete - 100mm diameter pipe.

Providing flanged joints to double flanged C.I./ D.I. pipes and specials including necessary bolts, nuts, rubber insertion and testing of joints etc., complete - 150mm diameter pipe.

Providing flanged joints to double flanged C.I./ D.I. pipes and specials including necessary bolts, nuts, rubber insertion and testing of joints etc., complete - 200mm diameter pipe.

Providing flanged joints to double flanged C.I./ D.I. pipes and specials including necessary bolts, nuts, rubber insertion and testing of joints etc., complete - 250mm diameter pipe.

Providing flanged joints to double flanged C.I./ D.I. pipes and specials including necessary bolts, nuts, rubber insertion and testing of joints etc., complete - 300mm diameter pipe.

Providing flanged joints to double flanged C.I./ D.I. pipes and specials including necessary bolts, nuts, rubber insertion and testing of joints etc., complete - 350mm diameter pipe.

Providing flanged joints to double flanged C.I./ D.I. pipes and specials including necessary bolts, nuts, rubber insertion and testing of joints etc., complete - 400mm diameter pipe.

Providing flanged joints to double flanged C.I./ D.I. pipes and specials including necessary bolts, nuts, rubber insertion and testing of joints etc., complete - 450mm diameter pipe.

Providing and fixing C.I. sluice valve (PN 1.6) (with cap) conforming to IS 14846 and ISI marked, with bolts, nuts, rubber insertion etc., complete (the tail pieces if required will be paid separately) - 100 mm dia.

Providing and fixing C.I. sluice valve (PN 1.6) (with handwheel) conforming to IS 14846 and ISI marked, with bolts, nuts, rubber insertion etc.,complete (the tail pieces if required will be paid separately)- 450 mm dia.

Providing and laying Ductile Iron socket and spigot pipes of class K7 (Electro steel/ Sripipes/ Jindal/ Electrotherm / Jai Balaji / TATA Metaliks Kubota) conforming to IS specification 8329/ 2000 and ISI marked suitable for tyton / push on joints in good condition including transportation of D.I.pipe from production centre / company to the site at UT of Puducherry, lowering to the trenches, laying to proper grade and alignment, testing of joints with required testing equipment etc.,complete all as per IS 12288 and CPWD specification. (earth work and jointing of pipes with rubber gasket will be paid separately) -100mm dia.

Providing and laying Ductile Iron socket and spigot pipes of class K7 (Electro steel/ Sripipes/ Jindal/ Electrotherm / Jai Balaji / TATA Metaliks Kubota) conforming to IS specification 8329/ 2000 and ISI marked suitable for tyton / push on joints in good condition including transportation of D.I.pipe from production centre / company to the site at UT of Puducherry, lowering to the trenches, laying to proper grade and alignment, testing of joints with required testing equipment etc.,complete all as per IS 12288 and CPWD specification. (earth work and jointing of pipes with rubber gasket will be paid separately) -150mm dia.

Providing and laying Ductile Iron socket and spigot pipes of class K7 (Electro steel/ Sripipes/ Jindal/ Electrotherm / Jai Balaji / TATA Metaliks Kubota) conforming to IS specification 8329/ 2000 and ISI marked suitable for tyton / push on joints in good condition including transportation of D.I.pipe from production centre / company at UT of Puducherry, lowering to the trenches, laying to proper grade and alignment, testing of joints with required testing equipment etc., complete all as per IS 12288 and CPWD specification. (earth work and jointing of pipes with rubber gasket will be paid separately) -250mm dia.

Providing and laying Ductile Iron socket and spigot pipes of class K7 (Electro steel/ Sripipes/ Jindal/ Electrotherm / Jai Balaji / TATA Metaliks Kubota) conforming to IS specification 8329/ 2000 and ISI marked suitable for tyton / push on joints in good condition including transportation of D.I.pipe from production centre / company to the site at UT of Puducherry, lowering to the trenches, laying to proper grade and alignment, testing of joints with required testing equipment etc., complete all as per IS 12288 and CPWD specification. (earth work and jointing of pipes with rubber gasket will be paid separately) -300mm dia.

Providing and laying Ductile Iron socket and spigot pipes of class K7 (Electro steel/ Sripipes/ Jindal/ Electrotherm / Jai Balaji / TATA Metaliks Kubota) conforming to IS specification 8329/ 2000 and ISI marked suitable for tyton / push on joints in good condition including transportation of D.I.pipe from production centre / company to the site at UT of Puducherry, lowering to the trenches, laying to proper gradeand alignment, testing of joints with required testing equipment etc., complete all as per IS 12288 and CPWD specification. (earth work and jointing of pipes with rubber gasket will be paid separately) -350mm dia.

Providing and laying Ductile Iron socket and spigot pipes of class K7 (Electro steel/ Sripipes/ Jindal/ Electrotherm / Jai Balaji / TATA Metaliks Kubota) conforming to IS specification 8329/ 2000 and ISI marked suitable for tyton / push on joints in good condition including transportation of D.I.pipe from production centre / company to the site at UT of Puducherry, lowering to the trenches, laying to proper grade and alignment, testing of joints with required testing equipment etc., complete all as per IS 12288 and CPWD specification. (earth work and jointing of pipes with rubber gasket will be paid separately) -400mm dia.

Providing and laying Ductile Iron Double flanged pipes of class K9 (Electro steel/ Sripipes/ Jindal/ Electrotherm) conforming to IS specification 8329/ 2000 and ISI marked suitable for flanged joints in good condition including transportation of D.I.pipe from production centre/ company to the site at UT of Puducherry, lowering to the trenches (or fixing in over head tanks above ground level) laying to proper grade and alignment, testing of joints with required testing equipment etc., complete all as per IS 12288 and CPWD specification . (earth work and jointing of pipes with rubber insertion will be paid separately) -100mm dia.

Providing and laying Ductile Iron Double flanged pipes of class K9 (Electro steel/ Sripipes/ Jindal/ Electrotherm) conforming to IS specification 8329/ 2000 and ISI marked suitable for flanged joints in good condition including transportation of D.I.pipe from production centre/ company to the site at UT of Puducherry, lowering to the trenches (or fixing in over head tanks above ground level) laying to proper grade and alignment, testing of joints with required testing equipment etc., complete all as per IS 12288 and CPWD specification . (earth work and jointing of pipes with rubber insertion will be paid separately) -150mm dia.

Providing and laying Ductile Iron Double flanged pipes of class K9 (Electro steel/ Sripipes/ Jindal/ Electrotherm) conforming to IS specification 8329/ 2000 and ISI marked suitable for flanged joints in good condition including transportation of D.I.pipe from production centre/ company to the site at UT of Puducherry, lowering to the trenches (or fixing in over head tanks above ground level) laying to proper grade and alignment, testing of joints with required testing equipment etc., complete all as per IS 12288 and CPWD specification . (earth work and jointing of pipes with rubber insertion will be paid separately) -250mm dia.

Providing and laying Ductile Iron Double flanged pipes of class K9 (Electro steel/ Sripipes/ Jindal/ Electrotherm) conforming to IS specification 8329/ 2000 and ISI marked suitable for flanged joints in good condition including transportation of D.I.pipe from production centre/ company to the site at UT of Puducherry, lowering to the trenches (or fixing in over head tanks above ground level) laying to proper grade and alignment, testing of joints with required testing equipment etc., complete all as per IS 12288 and CPWD specification . (earth work and jointing of pipes with rubber insertion will be paid separately) -300mm dia.

Providing and laying Ductile Iron Double flanged pipes of class K9 (Electro steel/ Sripipes/ Jindal/ Electrotherm) conforming to IS specification 8329/ 2000 and ISI marked suitable for flanged joints in good condition including transportation of D.I.pipe from production centre/ company to the site at UT of Puducherry, lowering to the trenches (or fixing in over head tanks above ground level) laying to proper grade and alignment, testing of joints with required testing equipment etc., complete all as per IS 12288 and CPWD specification . (earth work and jointing of pipes with rubber insertion will be paid separately) -350mm dia.

Providing and laying Ductile Iron Double flanged pipes of class K9 (Electro steel/ Sripipes/ Jindal/ Electrotherm) conforming to IS specification 8329/ 2000 and ISI marked suitable for flanged joints in good condition including transportation of D.I.pipe from production centre/ company to the site at UT of Puducherry, lowering to the trenches (or fixing in over head tanks above ground level) laying to proper grade and alignment, testing of joints with required testing equipment etc., complete all as per IS 12288 and CPWD specification . (earth work and jointing of pipes with rubber insertion will be paid separately) -400mm dia.

Providing and fixing in position S&S standard D.I. specials (Electro steel/ Sripipes/ Jindal/ Kiswok) such as tees, bends, collors, tapers, caps etc. conforming to IS specification 9523/ 2000 and ISI marked - 100 to 300mm dia.

Providing and fixing in position S&S standard D.I. specials (Electro steel/ Sripipes/ Jindal/ Kiswok) such as tees, bends, collors, tapers, caps etc.conforming to IS specification 9523/ 2000 and ISI marked - 350 to 450mm dia.

Providing and fixing in position flanged standard D.I. specials (Electro steel/ Sripipes/ Jindal/ Kiswok) such as tees, bends, collors, tapers, caps etc. conforming to IS specification 9523/2000 and ISI marked - 100 to 300mm dia.

Providing and fixing in position flanged standard D.I. specials (Electro steel /Sripipes/ Jindal/ Kiswok) such as tees, bends, collors, tapers, caps etc. conforming to IS specification 9523/ 2000 and ISI marked - 350 to 450mm dia.

Providing and fixing D.I. MJ collar coupling , with bolts, nuts, rubber insertion etc.,complete - 100 mm dia.

Threading of CI / DI pipes suitable for fixing flanges including transportation, labour charges etc., complete - 100 mm dia.

Providing and jointing cast iron / D.I. (S&S) pipe joints with rubber gasket (Tyton joints) conforming to IS 5382 & 12820 of SBR quality including the cost of fixing, testing the joints etc., complete -100mm dia.

Providing and jointing cast iron / D.I. (S&S) pipe joints with rubber gasket (Tyton joints) conforming to IS 5382 & 12820 of SBR quality including the cost of fixing, testing the joints etc., complete -250mm dia.

Providing and jointing cast iron / D.I. (S&S) pipe joints with rubber gasket (Tyton joints) conforming to IS 5382 & 12820 of SBR quality including the cost of fixing, testing the joints etc., complete -300mm dia.

Providing and jointing cast iron / D.I. (S&S) pipe joints with rubber gasket (Tyton joints) conforming to IS 5382 & 12820 of SBR quality including the cost of fixing, testing the joints etc., complete -350mm dia.

Providing and jointing cast iron / D.I. (S&S) pipe joints with rubber gasket (Tyton joints) conforming to IS 5382 & 12820 of SBR quality including the cost of fixing, testing the joints etc., complete -400mm dia.

Providing and fixing mild steel bracket including bolts, nuts, rubber insertion, labour charges etc, complete- 100 x 80mm dia.

Supply and installation of DI D/F Gate Valves (Soft seated ) Resilient seated soft sealing gate valves (Sluice valves ) (Make VAG, AVK, Fouress) with body bonnet of ductile iron of grade GGG 40, wedge fully rubber lined EPDM of good quality W720, replaceable spindle nut, without gland packing and with 3 O-ring protection on the shaft and seals of NBR and the valves should be vacuum tight and 100% leak proof with face to face dimensions as per BSS 163-89/ISI 4846 - 2000/ DIN3202 F4. All the valves should be Electrostatic powder coated both inside outside with pocket less straight thro body passage. All the valves shall be compatible for burried application without chambers, with pressure rating PN 10/16 - dia 150mm.

Supply and installation of DI D/F Gate Valves (Soft seated ) Resilient seated soft sealing gate valves (Sluice valves ) (Make VAG, AVK, Fouress) with body bonnet of ductile iron of grade GGG 40, wedge fully rubber lined EPDM of good quality W720, replaceable spindle nut, without gland packing and with 3 O-ring protection on the shaft and seals of NBR and the valves should be vacuum tight and 100% leak proof with face to face dimensions as per BSS 163-89/ISI 4846 - 2000/ DIN3202 F4. All the valves should be Electrostatic powder coated both inside outside with pocket less straight thro body passage. All the valves shall be compatible for burried application without chambers, with pressure rating PN 10/16 - dia 200mm.

Supply and installation of DI D/F Gate Valves (Soft seated ) Resilient seated soft sealing gate valves (Sluice valves ) (Make VAG, AVK, Fouress) with body bonnet of ductile iron of grade GGG 40, wedge fully rubber lined EPDM of good quality W720, replaceable spindle nut, without gland packing and with 3 O-ring protection on the shaft and seals of NBR and the valves should be vacuum tight and 100% leak proof with face to face dimensions as per BSS 163-89/ISI 4846 - 2000/ DIN3202 F4. All the valves should be Electrostatic powder coated both inside outside with pocket less straight thro body passage. All the valves shall be compatible for burried application without chambers, with pressure rating PN 10/16 - dia 300mm.

Providing, laying , spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mix plant carriage of mixed material by tipper to site , laying in uniform layer by manual means in sub-base / base course on well prepared surface and compacting with smooth 3 wheeled steel roller to achieve the desired density.

Providing and fixing non-corrosive Engineering plastic moulded clamp saddle with stainless 304 threaded metal inserted for tapping outlet suiting ½" clear bore with SS 304 wide strap with elastometric insulation for proper grip around the DI pipe with SS 304 suitable bolts & nuts saddle to have sealing rubber SBR grade 30 o-ring around shall as detailed in the drawing furnished. The rates include all labour charges for fixing bracket etc., complete as per instructions of Engineer-in-charge. Size 100x25mm dia (¾").

Providing, laying and jointing MDPE (PN 16) pipe PE 80 as per ISO 4427 as per BS 6920 over and above initial 1m length including transportation to the site, lowering to the trenches, laying to the proper grade and alignment etc., complete all as per specification - 25mm outer dia.

Providing house service connection for each house from the newly laid distribution grid with 25mm dia (OD) PN16, MDPE blue pipe PE 80 as per ISO 4427 Rev.I & tested as per BS 6920 upto 1.00 m length initially with 90 degree compression elbow as per ISO 14236 and polypropylene male & female thread metal insert (SS 304) of ISO 14236. The rate to include connection charges for making drilling holes and providing specials as per the direction of Engineer-in-charge.

Disposal of surplus excavated earth within a lead of 3 Km by mechanical transport including earth work in rough excavation loading transportation and deposition at places wherever required as directed by the Engineer - in - charge.

Connecting the newly laid house service conncetion from the newly laid MDPE service line to the existing service connection of each house with 25mm dia ASTM pipe having required length. The rate to includes dismantling the existing service pipe, cutting B.T portion,/WBM potrion/Paver block portion/ Earther portion/ CC portion if any, and plastering in CM 1:4 PCC 1:2;4 and brick work wherever necessary excluding cost of ASTM pipe including the labour charges for completing the connection. It also includes making good the dismantled area all as directed by the Engineer in - charge.

Supplying and fixing of 20mm size stainless steel flow control valve (SS 316 grade) with outer threaded ends, Operable pressure from 1mtr. Head with flow range 5LPM - 15LPM

Providing and fixing in position UPVC moulded endcap (Finolex/jain) (1 Mpa) conforming to IS 7834 part II and ISI marked, including labour charges for jointing. Jointing materials etc, complete - 20mm dia.

Supply and delivery of single Chamber, Double Orifice D.I Air Valve with Triple function (Venting, admitting and venting during operation) Tamper proof in one piece construction (Both Large and small Orifice housed in the housing itself), with capacity to handle air up to sonic velocity (300 m/s) with flange dimension acc. To EN 1092 - 2/IS 1538. Body and cover in ductile cast iron of grade GGG 40. All internal parts such as float, shell etc & all cover bolts of austenitic alloy steel and DN 50 float of HOSTAFLON and gaskets and seals of EPDM approved for anti bacterial which is mandatory for drinking water, with Electrostatic epoxy power coating (EP-P)inside and outside color blue RAL 5005 with minimum coating thickness of 250 microns. The EPDM rubber & Epoxy Power should be approved by W 270. (EP-P --> it is a resi - coat powder approved for drinking water application, appled through fusion bonding technology process by dipping the shot - blasted casted components heated up to 200 deg C). VAG DUOJET AIR Valve 80 mm dia

m/s egaa construction