SPL REPAIR TO CERTAIN BLDGS AND PROVN OF 01 TOILET ALONGWITH OVERHEAD TANK FOR BATHING AND ELECTRIC CONNECTION AT MIL STN UNDER GE (N) BIKANER

Amount

Dismantling Asbestos cement Corrugated sheets in roof covering including ridges complete all as specified and directed by Engineer in Charge.

Dismantling of existing wall and false ceiling of boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed by Engineer in Charge.

Taking down cement plaster on brick or conc surfaces including racking out joints hacking for key, scrubbing down with water complete all as specified and directed by Engineer in Charge.

Demolition of cement concrete in ground floor and pavings n.exc 15 cm thick below or above ground level including tiles and similar works complete all as specified and directed by Engineer in Charge.

Demolition of brick or stone masonary including all necessary arches, pillars, quions etc built in cement mortar complete all as specified and directed by Engineer in Charge.

Taking down chowkhat or frames exc 1.50 Sqm n.exc 4 Sqm (without taking down shutters from the frames)

Ditto all as per item no-6 above but n.exc 1.50 Sqm complete all as specified and directed by Engineer in Charge.

Taking down shutter only exc 1.00 sqm but nexc 2.00 sqm and refixing in the same opening after easening complete all as specified and directed by Engineer in Charge.

Taking down shutter only exc 1.00sqm but nexc 2.00 sqm and removing the same complete all as specified and directed by Engineer in Charge.

Taking up or down steel tubing 15 mm bore with connections for cleaning for refixing or removing to store yard complete all as specified and directed by Engineer in Charge.

Taking up or down steel tubing 20 mm bore with connections for cleaning for refixing or removing to store yard complete all as specified and directed by Engineer in Charge.

Demolition floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer in Charge.

Demolition of wrought iron or mild steel work of any description not other wise provided of for complete all as specified and directed by Engineer in Charge.

Dismantling water tanks and removing to store exc 500 ltrs and nexc1000 ltrs complete all as specified and directed by Engineer in Charge.

M&L for brick work with fly ash bricks straight or curved on plan exc 6 m mean radious built in cement mortar 1:6. complete all as specified and directed by Engineer in Charge.

M&L for Brick wk with flyash bricks straight or curved on plan to any radius in half thick wall built in CM 1:4 complete all as specified and directed by Engineer in Charge.specified.

M&L for pre painted galvalume aluminium zinc cozting GI based corrugated steel Sheet high rib profile tile pattern of slaty color coated 0.5 mm thick of 550 Mpa Tensile strength sheets as in roof covering and fixed as per manufacturers instruction (design as app by Engg in charge complete all as spfd ) complete all as specified and directed by Engineer in Charge.

Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer in Charge.

M&L for rendering (10+5)mm thick plaster in cement and sand mortar 1:4 using water proofing compound as per manufacturerer's instructions on brick or concrete surfaces (surfaces fair or other than fair) including finishing the surfaces even & smooth without using extra cement complete all as specified and directed by Engineer in Charge. Note : Supply only of water proofing compound shall be measured and paid for separately under appropriate items of this schedule.

Supply only liquid water proofing compound ISI marked complete all as specified and directed by Engineer in Charge.

M&L for 10mm thick rendering on brick or concrete surfaces in cm 1:6 finished even and smooth w/o using extra cement complete all as specified and directed by Engr-in-Charge.

S&F Composite cement ceiling board 4 mm thick in ( 595 mmX595 mm ) pannel (Make-everest ramco or eql.) designer ceiling pre finished conforming to IS 14862 type B cateogory three incl GI frame , grid work,hold fast,suspended with suspender along with holding down bolt complete . (Note: Ceiling board shall confirming to IS-14862 ,shall be fire resistant , Moisture resistant and ceiling shall be suspended with suspenter and adjuster) complete all as specified and directed by Engineer in Charge.

M&L for providing 75 mm thick cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates as in plinth protection finished even and smooth without using extra cement laid in bays n. exc 2m in length and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified and directed by Engineer in Charge.

M&L for screed bed or bedding layer of mortar 15mm thick in cement mortar 1:4 laying floor finishes complete all as specified and directed by Engineer in Charge.

M&L for machine cut kota stone flooring 20-25mm thick over cement screed base laid and jointeed with pigment to match the shade of the slab including rubbing with bees wax polishing all as spd and as directed by Engineer-in-charge.

M&L for Kota stone slab 18-20mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified.

M&L for coloured vitrified tiles 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engineer-In-Charge.

Cutting & grinding to existing kota stone flooring with bees wax polishing grinding upto mirror finish complete all as specified and directed by Engineer in Charge.

M&L for 10mm thick rendering on fair faces of brick / concrete surfaces in cement mortar 1:3 and finished even and fair for receiving tiles on vetical surface complete all as specified and directed by Engineer in Charge.

M&L glazed ceramic coloured tiles in vertical surfacaes 350x250x7mm/450x350x7mm thick set set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment complete all as specified and directed by Engineer in Charge.

M&L for plain cement concrete type D-2 1:4:8 , using 40mm graded curshed stone aggregate as in mass concrete filling.(such as in sunken floors , raising floors at entry) complete all as specified and directed by Engineer in Charge.

M&L for 25mm thick PCC type B-0 using 12.5mm graded crushed stone aggregate as in sub base for laying floor finishes complete all as specified and directed by Engineer in Charge.

M&L for Non-skid ceramic coloured tiles (square/rectengular) 7 to 8 mm thick, Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface complete all as specified and directed by Engineer in Charge.

M&L Jodhpur stone of roof slabs, self faced 5.00 cm thick, as in shelves , chajjas shelves etc nexc 2 m in length., hoisted and set, jointed and grouted in lime mortar 1:3 or cement mortar 1:6 complete all as specified and directed by Engineer in Charge.

Jodhpur stone of roof slab self faced 7.5cm to 10 cm thick 25 to 35 cm wide hoisted and set jointed and grouted in cement and sand mortar 1:3 complete all as specified and directed by Engineer in Charge.

Mild steel framed work such as grills, gratings, tank staging etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; ladder; framed balusters; railing;frame work for water tanks, cooler stand and similar work conforming to Fe 290 Gd E-165 complete all as specified and directed by Engineer in Charge.

M&L steel work in tubular trussess/ purlins incl spl shaped washer etc. using ERW or induction butt welded tubes confirming to IS 1161-1979 grade St-240. complete all as specified and directed by Engineer-In-Charge.

S&F Mild steel bolts.exc. 5 cm length not exc. 10 cm length (machine made) with hexagonal or square heads at one end and screwed the other , or screwed both ends, each screwed end to be fittied with washers and one hexagonal or square nut 11 to 15 mm neck dia complete all as specified and as directed by engineer-in-charge.

S&F plates (Plain or chequred) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachement complete all as specified and directed by Engineer in Charge.

M&L for mild steel work as in plates / flats angles etc as in cleats drilling welding complete all as specified and directed by Engineer in Charge.

S&F for PVC wall Lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on pvc frame all as specified and directed by Engr-in-Charge.

S&F for 5mm thick PVC sheet fillet of width 35mm for wall peneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing all as specified and directed by Engr-in-charge.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, in opening as per specifiecation complete all as specified and directed by Engineer in Charge.

S&F factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement forstyle and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles & rails with suitable PVC sheet beading and jointed together with solvent cement supply & fixing in the frame at site. complete all as specified and directed by Engineer in Charge.

S&F Butt hinges extruded alumonium alloy with galvanised mild steel hinges pin anodised and fixed ,type B-21 of 100mm complete all as specified and directed by Engineer in Charge.

S&F for 150mm size aluminium anodised barrel tower bolt of extruded section and fixed.complete all as specified and directed by Engineer in Charge.

S&F for 150mm size aluminium anodised handle of febricated type and fixed complete all as specified and directed by Engineer in Charge.

S&F 100 mm Steel locking bolt with MS electrogalvanized plate and bright bolt not less than 10 mm dia Complete all as specified and as directed by Engineer-In-Charge.

S&F 125 x 60mm pressed steel frames for doors with one or more rebate including necessary fixing lugs, hinges lock strike plate etc complete as specified including a coat of shop coat zinc chrome primer.

PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in filling in pressed steel frames/cantileaver/bed blocks etc for fixing windows, doors complete all as specified and as directed by Engineer-in-Charge

S&F 35mm thick Factorymade second class hard wood plain framed pannelled shutter (two panels and double shutter) with lock rail and pannel or 9mm BWP comerical ply or 12mm venered particle board with comerical face venering on both faces. The size of rail and style as per IS-1003 part kilin seasoned

S&F 2nd class hardwood 35 mm thick glazed and skeleton shutters, open rebated and prepared to receive glass guage, etc. (without sash bars), edges of framing plain, chamfered or rounded. Fitted with cut and mitred beads for securing glass,etc. sizes of members of shutters as specified in SSR Part I, section 8, clause 8.24(a); supplied and fitted to chowkhats complete all as specified and as directed by Engineer-in-charge.

M&L for 30mm thick Flush shutters for door solid core construction with block board core and ply wood face panels both faces covered with decorative face veneer with lipping to match complete all as specfied and as directed by Engineer-in-Charge

S&F mild steel barrel tower bolt, stove enamelled black with bright bolt of 200 mm complete all as specified and directed by Engineer in Charge.

S&F mild steel sliding door bolts plate type stove enameled black with bright bolt not less than 12 mm dia with and incl. a minimum of 6 bolts and nuts four on bolt plate and two on staple plate of 300 mm long complete all as specified and as directed by Engineer-In-Charge.

S&F MS pressed handle oval type stove enamel block with bright bolt of 150 mm. complete all as specified and directed by Engineer in Charge.

S&F brass 300 mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed by engineer-in-charge.

S&F in replacement curtain rod 25mm dia, mild steel, chromium plated, fancy type with fixing brackets and knobs at both ends as per site requirement complete all as specified and directed by Engr-in-Charge Note :- The cost of brackets and knobs is deemed to be incl in the quoted rate. Nothinbg extra shall be paid on this account.

S&F stain less steel peg set with 06 no of hooks mounted on SS plate 4 mm thick with and including screws complete all as specified and directed by Engineer in Charge.

S&F factory made mild steel Window/Ventilator (box typ)e with side huge shutters incl pintol hinges,steel handles, steel peg stay and all locking arrangement and one shop coat of red oxide primer complete all specified. Note : i) The window shall be fabricated as per Drg No CEBTZ/TD/888R & 889 ii) MS fillets, glazing, wire gauge shall be measured and paid separately iii) opening incl provn shutter for cooler to be provided

S&F 4 mm Sheeet glass ordinary quality and glazing with oil putty in square n exc. 0.5 sqm in each pane complete all as specified and as directed by Engineer-in-Charge.

S&F 3 mm thick Frosted glass ordinary quality and glazing with oil putty in squares n exe 0.5 sqm each pane complete all as specified and directed by Engineer in Charge.

M&L stain less steel wire cloth 0.56 mm nominal dia of wire anfd averqagae width of aperature 1.18mm and fixed with tinned tracks, or galvanised wire spaples complete all as specified and directed by Engineer in Charge.

S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I of capacity 500 liters including all accessories complete all as specified .

S&F Ball valve high pressure of PTMT with epoxy coated almn rod and high density plastic ball screwed for iron pipe and fixed in repair.of 20mm complete all as specified and directed by Engineer in Charge.

M & L 15 mm bore galvanised steel water tubing medium grade (ISI Marked) with all fittings and fixed complete to walls and or laid under floors etc complete all as specified and directed by Engineer in Charge.

M & L 20 mm bore galvanised steel water tubing medium grade (ISI Marked) with all fittings and fixed complete to walls and or laid under floors etc complete all as specified.

Supply, laying and jointing GI tubes, medium grade 40mm dia in lengths with screwed and socket joints together with all galvanised steel fittings such as bends, elbows, tees, union, short pieces, connectors, check nuts, caps, plugs etc fixed complete laid in trenches complete all as specified and directed by Engr-in-charge.

Supply, laying and jointing GI tubes, medium grade 25mm dia in lengths with screwed and socket joints together with all galvanised steel fittings such as bends, elbows, tees, union, short pieces, connectors, check nuts, caps, plugs etc fixed complete laid in trenches complete all as specified and directed by Engr-in-charge.

M&L Gun metal globe of gate valve with iron wheel head, screwed both ends of size 20mm as in repair complete all as specified and directed by Engineer in Charge.

S&F Gun metal gate valve 40mm bore with iron wheel head screwed both ends for iron pipes complete all as specified and directed .

Cutting existing steel tubing for alterations or additions done in position without taking down for 10mm to 50 dia pipe (Each cut measured) complete all as specified and directed by Engineer in Charge.

S&F ball brass valve high pressure with polythene float and flynut complete screwed for iron pipe or brass ferrule of size 20 mm bore complete all as specified and directed.

S&F in repairs Viterous china wash down water closet pan pan (pedestal pattern ), white (excluding flushing cistern , flush pipe incl seat & cover padestal with necessary hinges.(Make: CERA,Perryware,Hindware)

S&F in repairs PVC flushing cistern 10 ltrs capacity incl flushing pipe and connections complete. as approved by Engineer in charge,low level, white with inlet, ball valve ,complete including connection to pipe all as specified.

S&F in repair Vitreous China wash basin, white, flat back, size 550x400mm including cutting for and pinning in ends of brackets or erecting stand including brackets & waste pipe etc complete all as specified.

S&F in repair fancy type pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed of bore dia 15mm.complete all as specified and directed by Engineer in Charge.

S&F in repair 32 mm size cp waste coupling (half or full threaded) Minimum weight 32mm-45gms/40mm-60 gms) incl waste pipe complete all as specified and directed by Engineer in Charge.

S&F in repair 15 mm bore Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed by Engineer in Charge.

S&F in repair chromium plated long body Bib Tap, with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule, fancy type, CP, 15mm dia complete all as specified and directed by Engineer in Charge.

S&Fin repair 15mm bore PVC connection with PTMT nuts length 450 mm complete all as specified and directed by Engineer in Charge.

S&F in repair fancy type chromium plated stop valve/Angle valve cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions chromium plated of size 15 mm.complete all as specified and directed by Engineer in Charge.

S&F in repair health faucet with 1 mtr long tube and hook and knab all as specified and directed by Engineer-in-Charge

S&F in repair Brass chromium plated shower rose 125 mm size with and incl shower arm complete all as specified and directed by Engineer in Charge.

S&F in repair 15 mm bore brass fancy concealed type stop valve chromium plated with long shank and cup complete screwed for iron pipe complete all as specified and directed by Engineer in Charge.

S&F in repair Towel ring of PTMT with and incl chromium plated brass screws and wooden /plastic cleats complete all as specified and directed by Engineer in Charge.

S&F Brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges aluminium anodized, fixed with rawl plugs as in repairs all as specified.

S & F glass corner of size 300mmx300mm with 5.5 mm thick glass and steelness steel clip and steelness steel railing allround the shelf complete all as specified and directed by engineer in charge .

S&F in repair soap dish complete all as specified and directed by Engineer in Charge.Make Jaquar/ cera or eqivalent

S&F cast iron soil, waste and vent pipes (sand cast) 100mm bore in any length with or without ears with cement joints laid in trenches complete all as specified and directed by Engineer in Charge.

S&F cast iron soil, waste and vent pipes (sand cast) 50mm bore in any length with or without ears with cement joints fixed to wall complete all as specified and directed by Engineer in Charge.

S&F cast iron vent cowl for 50 m dia pipe. complete all as specified and directed by Engineer in Charge.

S&F Cast iron bend (any radius) diminishing pieces or tapers/ Reducers/ Sockets 100mm bore fitted with oval access door. complete all as specified and directed by Engineer in Charge.(Larger bore measured)

S&F 100m bore CI 'P' or 'S" trap 110/110 complete all as specified and directed by Engineer in Charge.

S&F 75 mm bore CI floor trap plain with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed by Engineer in Charge.

S&F 100 mm bore CI floor trap plain with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed by Engineer in Charge.

S&F stack clamps out of 100mm by 5mm flat iron and 16mm dia round iron stays including bolts and nuts and securing ends of stays to walls for 50mm bore pipe complete all as specified and directed by Engineer in Charge.

M&L for prep of new plastered surfaces of walls by applying a thin layer of Birla white putty to give uniform surface applying two coat of oil bound distamper on new surfaces of desired finish as app by Eng-in-charge in any position

M&L two coats of oil bound distemper on old surfaces of walls including upto 3mm thick layer of wall putty to give uniform finish on any type of surface complete all as specified and directed. NOTE:-(Before applying of wall care putty, Complete removing of treatment as directed and approved by Engr-in-charge) preparation on new surfaces over coat of primer including complete all as specified and directed. .

M&L for prep of new plastered and unplastered surfaces of walls and applying two coat of Cement Base Paint on walls over a coat of alkaili resistant priming paint by Eng-in-charge in any position

M&L complete removal of existing treatment on wall two coats of cement cement base paint on walls including preparation of old surfaces complete all as specified and directed.(Note:- Prepration of old surface shall include brooming down or steel wire brushing; scrappingdown soot moulds, moss and effloescent salts and trading oil nad greasy spout.)

M&L for preparation of steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over and incl a coat of red oxide primer all as specified.

Ditto all as per item no- 103 above but one coat on old decorated surfaces complete all as specified and directed by Engineer in Charge.

M&L for two coats of synthetic enamel paint on new wooden surfaces incl prep over a coat of pink primmer complete all as specified and directed by Engineer in Charge.

Ditto all as per item no- 105 above one coat on old decorated surfaces complete all as specified and directed by Engineer in Charge.

M&L hardcore of broken stone or boulders gauge n exc. 63 mm, deposited, spread and levelled in layer n exc. 15 cm thick watered and rammed to a true surface complete all as specified and directed by Engineer in Charge.

M&L for 75mm thick PCC (1:4:8), type C2 using 40mm graded stone agg as in sub base of floors etc finished even and rough complete all as specified and directed by Engineer in Charge.

M & L for Screed bed or bedding layer of mortar(1:6) 15mm thick for laying floor finishes complete all as specified and directed by Engineer in Charge.

M&L Chequered cement concrete tiles 20cmx20cmx25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and no pigment complete all as specified and directed by Engineer in Charge.

M&L for 15mm thick Rendering in cement mortar 1: 4 on fair faces of brick work or concrete surfaces, finished fair and even complete all as specified and directed by Engineer in Charge.

M&L for Preparing new/old platered surface and applying two coats of white wash on wall complete all as specified and as dircted by Engineer-In-Charge.

Demolition of reinforced cement concrete in roof floor (other than ground floors beams staircase, landing chajja and similar work)complete all as specified and directed by Engineer in Charge.

Excavation in trenches not exc 1.5m wide and not exc. 1.5m depth in any type of soil for foundation etc or for shafts, well drain pipes /Cable getting out in any type of soil complete all as specified and directed by Engineer in Charge.

Returning fillling in including spreading, levelling watering and well ramming in layers not exc 25cm thick in each layer complete all as specified and directed by Engineer in Charge.

Removing excavated soil to a distance n exc 50m and depositing at a level n exc 1.5m above the starting point. complete all as specified and directed by Engineer in Charge.

Removing building materials etc ( other than spoil payable under item no 116 above ) to a distance of n exc 3 Km or under , beyond the lead included in the rates , including, loading unloading and stacking at the destination.complete all as specified and directed by Engineer in Charge.

M&L for mild steel steel TMT bars 6mm to 8mm dia and over cut to length bent to shape reqd ,incl cranking ,bending spirally for hooping columns hooking ends and binding with mild steel wire annealed not less than 0.9 mm dia complete all as specified and directed by Engineer in Charge.

M&L Precasted RCC 1:2:4 type B1 using 20mm graded aggregates for precast cement conc slabs as in manhole covers set in cement mortar1:4. incl form work complete all as specified and directed by Engineer in Charge.

M&L for brick work with sub class 'B' Burnt bricks exc 6m mean radius straight or curved on plan built in cement mortar 1:4. complete all as specified and directed by Engineer in Charge. Note : 8.50cum Brick work under this item shall be carried out in sewage disposal work i.e. manholes.

M&L For PCC type B1(1:2:4) using 20 mm graded cushed stone agg as in coping ,benching and the like incl form work complete all as specified and directed by Engineer in Charge.

M&L for Plain cement conc 1:4:8 type D-2 using 40mm graded agg as in conc bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150mm bore pipes complete all as specified and directed by Engineer in Charge.

Supplying and laying salt glazed stoneware pipe confirming to IS 651-1972 in tranches and jointed in cement mortar 1:1 complete all as shown in Sch A for 150mm internal dia of pipe complete all as specified and directed by Engineer in Charge. ( excavation and earth work measured separately)

M&L for extra for forming fair finished drain or channel 30cm inner girth in cement concrete ,using extra cement ,incl forms moulds ,mitered/stopped ends complete all as specified and directed by Engineer in Charge.

Excavation over area n exc 1.5m in depth for wall foundation etc or for shaft, well, etc n exc 10 sq m on plan and getting out in soft/loose soil complete all as specified and directed by Engineer in Charge.

Excavation over area exc 1.5m in depth for wall foundation etc or for shaft, well, etc n exc 10 sq m on plan and getting out in soft/loose soil complete all as specified and directed by Engineer in Charge.

Earth filling under floors or in foundation incl watering and consolidation. complete all as specified and directed by Engineer in Charge.

M&L roughly squared stone lintels, beams, hammer dressed on face and soffits, hoisted, set and pointed in CM 1:4 complete n exc 3m in length.complete all as specified and directed by Engineer in Charge.

M&L Stone for Chajja, hammer dressed on face and soffits, hoisted, set and pointed in CM 1:4 complete all as specified and directed by Engineer in Charge.

M&L for PCC 1:2:4 type B-2 using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and directed by Engineer in Charge.

M&L for 75mm thick PCC 1:5:10 type E-2 using 40mm graded stone agregate as sub base of floorscomplete all as specified and directed by Engineer in Charge.

M&L cement plastering 15mm thick in CM 1:6 on other than fair face of brick work surface finished even & smooth w/o using extra cement complete all as specified and directed by Engineer in Charge.

S&F Steel ventilator with top hung shutter including hinges steel peg stay complete all as specified and directed by Engineer in Charge.

S&F M S Guard bars of 12mm square bars welded to steel frame of windows complete all as specified and directed by Engineer in Charge.

S&F figured glass, pin head type, 4mm thick and glazing with oil putty in square n.exc 0.5 sqm in each pane.

S&F Butt hinges medium weight ,cold rolled mild steel of size 100mm complete all as specified and directed by Engineer in Charge.

S&F aluminum cast type handles 150mm size complete all as specified and directed by Engineer in Charge.

S&F 200mm long alumimium barrel tower bolts extruded section complete all as specified and directed by Engineer in Charge.

S&F water closet vitreous china squatting pan 'Orissa pattern' size Each 580 mm x 440 mm white, with integral foot rests & incl P or S trap and provision of lime concrete complete all as specified and directed by Engineer in Charge.

S&F Bib taps cast copper alloy fancy type with crutch or butterfly handle screwed for iron pipe of 15mm bore and fixed complete all as specified and directed by Engineer in Charge.

S&F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with aluminium alloy brackets and guard rail 60cm long fixed on wall with PVC rawl plug & cadmium plated brass screws, complete all as specified and as directed.

S&F stainless steel Peg Set of Six of standard size (not less than 300mm long) fixed to wall with two rawl plugs and chromium plated brass screws complete all as specified & as directed. Make :- Cat Part No BEA-30 of make – Prayag or equivalent in makes mentioned in Appendix 'B' here-in-after.

S&F Vitreous China Urinal, Half stall type, white complete all as specified and directed by Engineer in Charge.(excluding flushing cistern, flush pipe and waste pipe)

S&F 15 mm bore Concussive push button taps of cast copper alloy, screwed for iron pipe complete all as specified and directed by Engineer in Charge.

S&F Stop valve, 20 mm dia, fancy type, Chromium plated, cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed by Engineer in Charge.

S&F PVC (SWR) floor trap, plain with CP grating including jointing with solvent cement diameter of outlet 75mm complete all as specified and directed by Engineer in Charge.

S&F PVC( SWR) pipe of 110mm bore fixed to wall complete all as specified and directed by Engineer in Charge.

S&F PVC( SWR) pipe of 75mm bore laid in floors or trenches complete all as specified and directed by Engineer in Charge.

S&F PVC(SWR) bend any radius of 110mm bore jointed with solvent cement complete all as specified and directed by Engineer in Charge.

S&F PVC(SWR) bend any radius of 75mm bore jointed with solvent cement complete all as specified and directed by Engineer in Charge.

S&F PVC(SWR) junction double (Single T) of size 110mm bore jointing with solvent cement complete all as specified and directed by Engineer in Charge.

S&F PVC(SWR) floor trap plain with grating including jointing with solvent cement of size 75mm outlet complete all as specified and directed by Engineer in Charge.

S&F PVC (SWR) vent cowl for 75mm bore pipe complete all as specified and directed by Engineer in Charge.

S&F PVC reducer 110mm bore pipe complete all as specified and directed by Engineer in Charge.

S&F Rotational moulded polyethylene water storage tanks of capacity 1000 litres, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc complete all as specified and directed by Engineer-in-Charge. Notes :- (i) The tanks shall be white coloured and ISI marked. Also refer paras 18.60 and 18.60 A of MES Schedule Part-I. (ii) Payment for inlet, outlet and over flow pipes and ball valve shall be made separately. However cost of providing necessary GI fittings such as nipples with check nuts for inlet and outlet pipes, GI plug with check nut for over flow pipe and 30 cm long wash out pipe, GI 20mm nominal bore, medium grade and check nut for wash out pipes of size as per actual requirements as directed by the Engineer-in-Charge shall be deemed to be included in the unit rate of this item.

S&F Ball valves 20mm bore high pressure of PTMT with epoxy coated alum rod and high density plastic ball screwed for iron pipe complete all as specified and directed by Engineer in Charge.

M&L 75 mm thick Cement concrete type C2, 1:3:6 (using 40 mm graded stone aggregate) in plinth protections/hardstanding, finished even and smooth w/o using extra cement, laid in panels including making joints 12mm wide to the full depth of PCC at every 3 metres and at every change of direction and filling the same with & including bitumen and sand 1:3 by weight complete all as specified and directed by Engineer in Charge.

M&L for preparation on newly plastered surface of wall for painting and applying three coat of white wash all as specified and directed by Engr-in-Charge.

Preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed by Engineer-in-Charge.

Soakage wells excavation, in ordinary Soil, Foundation in PCC 1:3:6, wells of Honey combed and solid in M-25 Concrete, including intercepting chamber, screen chamber Brick work in CM, RCC cover slab in M-25/ RR masonry / Filling with brick bats, complete of size do – but 2.4 M dia X 3.0 M deep. As per TD No- BTD-830 sheet 1/1 complete all as specified and directed by Engineer in Charge.

Materal and labour for construction of brick masonary valve pit chamber of size 900x900x600 mm (Internal dimension) using sub class ,B, bricks complete, earth work, PCC (1:4:8) type D-2 using 40 mm graded stone aggregate in foundation, brick masonary sub class bricks 23 cm build n cement mortar and below ground level PCC with 1:2:4 type B2 using 20mm grade stone aggregate, copng 50 mm thick including frame of size 75x75x6mm made of angles iron and chamber cover made of MS sheet of 4 mm thickness double leaf including MS hinges locking arrangement with provision of locks and keys, painting of the steel surfaces with two coats of synthetic enamel paint over a coat of red oxide primer including necessary excavation, returning & filling & removing of surplus soil etc complete all as specified and as dircted by Engineer in Charge.

Surface excavation n.exc 30 cm deep and averaging 15cm deep and getting out.in soft / loose soil complete all as specified and directed by Engineer in Charge.

M&L for 25 mm thick Sand filling under floors or in foundations including watering and consolidation. complete all as specified and directed by Engineer in Charge.

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade with grey cement and no pigment complete all as specified and directed by Engineer in Charge.

M&L Mild steel TMT bars 10mm dia and over as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed by Engineer in Charge.

S&F 110mm bore PVC pipe (SWR) as in weep holes complete all as specified and directed by Engineer in Charge.

Taking down carefully (aluminium) point wiring complete of any type (batten/ surface conduit or concealed) for light point, fan point, bell point socket point or power point complete with all fitting such as switches, sockets pendants, ceiling rose, round block etc complete and making good disturbed surfaces of wall, floor or ceiling with plaster of tiles or roof treatment etc and finishing the surfaces with distemper/white washing/colour washing to match with the existing surface complete all as spcified and directed.

Taking down old U/S existing DB SPN 8 way including MCB/MCCB of any capacity and any size and removing from site and making good the disturbed surface of wall complete all as specified and directed by Engineer in Charge.

M & L for point wiring for one light/fan/bell/buzzer point controlled by one way switch with 1.5 sqmm single core PVC insulated and sheathed multi stranded copper conductor FRLSH cable 1100 volts grade (ISI Marked) including 1.5 sqmm single core PVC insulated and sheathed multi stranded copper conductor FRLSH cable 1100 volts grade (ISI Marked) as continues earth wire in green colour to coomon earth dolly laid/drawn into and including non metalic PVC concealed conduit (medium duty, ISI marked not less than 20 mm dia) with all fittings such as tee, bends etc all as per IS terminated in & including new modular metal flush boxes of requisite module concealed in wall for mounting fittings like modular Switches, sockets, regulators etc with and including modular cover plates with frame of requisite modules all as specified and as directed: Notes:- (i) Cost of cutting/leaving forming chases for conduit, sinking for metal flush boxes and making good in CM 1:4 shall deemed to be included in quoted rate of this item. (ii) The quoted rates of this item shall deemed for include for modular metal flush boxes of requisite module and modular cover plate with frame of requisite module of colour as approved by GE

(a) One 3 pin 5 amps socket point on the same board with other switches complete all as specified and directed by Engineer in Charge.

(b) One 3 pin 5 amps socket on independent board.

Ditto all as per item No 169 here -in- before but for one 3 pin 15/16 Amps socket outlet controlled by one 15/16 Amps switch on independent board with 4.0 sqmm single core PVC insulated and and sheathed multistranded copper conductor FRLSH cable 1100 Volt grade (ISI marked) including 4.0 Sqmm single core PVC insulated and sheathed multistranded copper conductor FRLSH cable 1100 Volt grade (ISI marked) as continuous earth wire in green colour complete all as specified and directed by Engineer in Charge.

S&F switch Modular type, 6 Amp, 1 module single pole one way, 230 Volts, Modular type complete all as specified and as directed by Engr- in -charge.

S&F switch Modular type, 16 Amp, 1 module single pole one way, 230 Volts, Modular type complete all as specified and as directed by Engr- in -charge.

M&L socket outlet 3 Pin 6 Amps modular type, 2/3 pin combined 2 module 230 Volts complete all as specified and directed by Engr-in-Charge.

M&L socket outlet 3 Pin 6/16 Amps modular type, 2/3 pin combined 2 module 230 Volts complete all as specified and directed by Engr-in-Charge.

S&F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp complete all as specified and as directed by engineer-in-charge.

S&F ceiling rose, surface backelite , three terminal AC, 230 volt complete all as specified.

S&F LED tube light fitting, 1x 20-22 watts, 230 volt, basic all purpose surface and wall mounted led batten with polycarbonate housing & integrated electronic driver, pre-wired and fixed on walls with all fixing accessories such as screws, clips etc and connecting up with two core flexible copper conductor cable of size 24/0.20 sqmm complete all as specified and directed by Engr-in-charge. Make : Philips-BN021 LED 20S PSU CW GR S2/ Crompton Greaves LDDR20-CDL Dazzle Ray / bajaj-BCLAB 20W

M & L Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed by Engineer in Charge.

S & F LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable complete all as specified and directed by Engineer in Charge.

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed by Engineer in Charge.

Supply and fixing LED mirror light fitting , type with high out put diffuser 2 feet, 5watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete.HAVELLS CAT PART NO-ENDURALINEARNEOBS10WLED865SPCWH/WIPRO CAT PART NO-LL20-111-XXX-65NE3/BCLSB 10 WH

Taking down fan,sealing cable end,dismantling blades of any make, any sweep, complete all as specified and directed by Engineer in Charge.

Supply and hanging/fixing ceiling fan 1200mm sweep AC supply (input voltage range 120 to 280v), BLDC type, 5 star rated BEE and ISI marked, super enameled copper winding of 'B' class insulation, single phase 20 watt (+ 10%), PF 0.90 (MIN), air delivery of 220 CUM per min (CMM), 350 RPM (+ 10%), TEMP RISE 40 DEGREE MAX, without remote, with electronic regulator, 3 blades, down rod including accessories, total harmonic less than 10%, 5 speed, hanging in position, including making connection wih and including flexible cord twin core twisted copper conductor of size 23/0.0076 from cealing rose to fan complete all as specified and directed by Engineer in Charge. Note :- (i) Sl No of cealing fan and GE office name shall also be writing on fan with red colour permanant marker. Cost for the same shall deemed to be included in quoted unit rate. Nothing shall be paid extra on this account.

supply and fixing fan regulator electronic socket type five step controlled 230V AC 50 Hz for complete all as specified and directed by Engr-In-Charge.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm complete all as specified and directed by Engineer in Charge.

Supply and fixing LED Bldg Security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed by Engineer in Charge.

S&F GI bracket made out of 40 mm bore GI pipe light grade /medume grade, ISI marked, medium grade 1.2m long bent to shape suitable for fixing of street light fitting including with 2 Nos MS clamps made with 40x3mm flat iron, bolts, nuts, washers etc including two coats of synthetic enamel paint over one coat of zinc chrome primer and fixing on electric pole complete all as specified and as directed by Engr-in-charge.

S & F double door, sheet metal enclosure, powder coated for MCB DB SPN 12 way fitted with neutral link, earth bar , din rail and 200 amps rated bus bar 230 volt conforming to IS 13032-1991 complete all as specified and as directed by Engr-in-charge.

S & F double door, sheet metal enclosure, powder coated for MCB DB SPN 8 way fitted with neutral link, earth bar , din rail and 200 amps rated bus bar 230 volt conforming to IS 13032-1991 complete all as specified and as directed by Engr-in-charge.

M&L for submain wiring using 2 runs of single core FRLSH PVC insulated, unsheathed stranded copper conductor cable of size 2runs of 6 Sqmm of voltage rating 1100V for Single phase & neutral, drawn in and including concealed PVC conduit of dia not less than 25 mm dia with standard acessories, along with two run of FRLSH PVC insulated, unsheathed, stranded copper conductor of size 2x 6.0 Sqmm as earth continuity conductor all as specified and directed(Note-2 runs of single core FRLSH PVC cable 6sqmm for Single phase & neutral with one run of earth conductor as earth and conduit shall be measured as one unit)

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SPN 40 to 63 AMP in the MCB DB complete with connection testing and commissioning all as specified and as dircted by Engr-in-charge.

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SP 6 To 32 AMP in the MCB DB complete with connection testing and commissioning all as specified and as dircted by Engr-in-charge.

M&L for Earthing complete with galvanized steel earth plate electrode 60cm x60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 meters deep below normal ground level) with top edge of plate not less than 1.5 meters below normal ground level connecting to the galvanised earth lead wire 4.0 mm dia by means of bolts, nuts check nuts and washers of galvanized iron and earth strip protected by provision of GI mediumgrade pipe 40mm bore including provision of concrete pit made with 40mm thick cover of RCC 1:2:4 reinforced with XPM (Weight not less than 4Kg/Sqm) and frame of angle iron 40x 40x6 mm and handle of 6mm dia MS bar made to shape, GI light grade 20mm bore pipe for watering perforated at bottom, 1.75meter long placed on top edge of earth plate, common salt & charcoal filling with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returing filling in and removal of surplus soil to a distance not exceeding 50 meters all as per electrical plate No -5 of SSR 2009 Part-I and connecting to Lighting protection earth test points all as specifed and directed including testing on completion.

S & F MCB SPN, 5-32 Amps, 240 volts, breaking capacity 16KA complete all as specified and as dircted by Engr-in-charge.

S & F water heater storage type 25 Ltr capacity, BEE 5 star and 8 bar pressure rated stainless steel (minimum wall thickness 2 mm) tank with feroglass coated inner container energy saving high density PUF insulation vertical ABS shock proof plastic body grouting of studs in wall in cement motar (1:3) nuts, washers, provision of two Nos PVC braided connection 450mm long heavy duty with brass nuts and two Nos brass chromium plated angular valve,thermostate,NRV ,TOP PLUG 20AMP with valve flange suitable for 15mm bore pipe for water supply connection complete. Make : Havells (Model -Monza EC) Cat part No GHWAMFSWH025/Bajaj calenta storage/Cromton solarium Qube

Supply and laying Sand coarse dry as in cushioning of under ground electric cable in trenches, laid to a uniform thickness of 23 cm (15 cm under the cable & 8 cm over the cable) and gently punned down to 18 cm thickness complete all as specified and directed by Engineer in Charge.

Supply and laying bricks (old size) for cable protection by using common burnt clay building bricks, sub-class ‘B’ designation 75 laid dry flat across length of the cable with width of the trenches equal to length of bricks complete all as specified and directed by Engineer in Charge.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16sq mm 2 core complete all as specified and directed by Engineer in Charge.

S&F GI tubing light grade 40mm dia for protection of cable on pole/ wall etc complete all as specified and as directed by Engr in charge.

ALPHA ENGINEERING COMPANY

M/S ASHRAFI CONSTRUCTION CO

SHREE JASWANT CONSTRUCTION COMPANY

A.S. CONSTRUCTION COMPANY