Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹29.0 LAdmitted-Finance | ₹29.0 L | L1 | Admitted-Finance |
| 2 | L2₹30.9 LAdmitted-Finance TULSI ASTHA FLAT NO 1 PLOT NO 54 SECTOR 12 VASHI NAVI MUMBAI THANE 400 703 | THANE | MAHARASHTRA | 400703 | ₹30.9 L | L2 | Admitted-Finance |
| 3 | L3₹32.3 LAdmitted-Finance 64 A JASRAJ MANSION 1ST FLOOR OLD HANUMAN LANE KALBADEVI ROAD MUMBAI 400 002 | MUMBAI | MAHARASHTRA | 400002 | ₹32.3 L | L3 | Admitted-Finance |
| 4 | L4₹32.6 LAdmitted-Finance ATLANTIS A2 1501 PLOT NO 05 SECTOR 11 NEAR CLOUD 36 GHANSOLI NAVI MUMBAI 400 701 E 97 CWE SUBS BHANDUP | THANE | MAHARASHTRA | 400701 | ₹32.6 L | L4 | Admitted-Finance |
| 5 | L5₹33.0 LAdmitted-Finance ATLANTIS A2 1501 PLOT NO 05 SECTOR 11 NEAR CLOUD 36 GHANSOLI NAVI MUMBAI 400 701 E 97 CWE SUBS BHANDUP | THANE | MAHARASHTRA | 400701 | ₹33.0 L | L5 | Admitted-Finance |
| Sl No | Description | Qty | Unit | PRIME ENGINEERS L4 | sahajanand const co. L2 | RAJU ENTERPRISES L8 | Parmatma Enterprises L7 | HINDUSTAN BUILDERS L5 | M/s Shree Construction Co L6 | Atharva Enterprises L1 | M/s Mohd Altaf Hanif Qureshi L9 | M/s Mukesh Engineers L3 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | S&F Pre- painted galvalume sheet having aluminum zinc coating with hot dip alloy GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with fixed using hot dip galvanized, self drilling and self tapping screws neoprene and EPDM washers. Penetrations and laps in sheet shall be sealed by using proper sealant profile. HDPE fillers shall be provided wherever required to close voids between sheets, sheet & fastners etc. completely all as specified and directed. upto maximum height of 20 Mtr including scaffolding and all safety equipments if required including Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings as specified.
Note : No additional payment on any account will be considered and only plan area whatever have been provided will be measured. Rate quoted maybe considered including of bending for specific curvature as provided in existing building. | 340 | Sqm | 666 ₹2.3 L | 750 ₹2.5 L | 740 ₹2.5 L | 720 ₹2.4 L | 775 ₹2.6 L | 635 ₹2.2 L | 700 ₹2.4 L | 900 ₹3.1 L | 930 ₹3.2 L |
| 2.00 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet in ridge 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified upto maximum height of 20 Mtr including scaffolding and all safety equipments if required including Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings as specified.
Note : No additional payment on any account will be considered and only plan area whatever have been provided will be measured. Rate quoted maybe considered including of bending for specific curvature as provided in existing building. | 80 | Sqm | 666 ₹53,280 | 600 ₹48,000 | 650 ₹52,000 | 700 ₹56,000 | 750 ₹60,000 | 635 ₹50,800 | 700 ₹56,000 | 850 ₹68,000 | 600 ₹48,000 |
| 3.00 | S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe 290 gde E-165 including of dismantling of old iron or mild steel work of any description and removing from site complete all as specified and as directed by EIC. | 800 | Kg | 88 ₹70,400 | 100 ₹80,000 | 110 ₹88,000 | 110 ₹88,000 | 110 ₹88,000 | 95 ₹76,000 | 100 ₹80,000 | 120 ₹96,000 | 70 ₹56,000 |
| 4.00 | S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors, Gates including Hold fast & Aldrop and related items; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde E-165 including of dismantling of old iron or mild steel work of any description and removing from site complete all as specified and as directed by EIC. | 1,900 | Kg | 88 ₹1.7 L | 100 ₹1.9 L | 110 ₹2.1 L | 100 ₹1.9 L | 110 ₹2.1 L | 95 ₹1.8 L | 100 ₹1.9 L | 120 ₹2.3 L | 70 ₹1.3 L |
| 5.00 | S&F as in repairs for 1.0mm Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 with welded or soldered joints including dismantling of old sheet of any thickness complete all as specified and directed by EIC. | 80 | Sqm | 1,400 ₹1.1 L | 1,200 ₹96,000 | 800 ₹64,000 | 1,650 ₹1.3 L | 1,500 ₹1.2 L | 800 ₹64,000 | 1,000 ₹80,000 | 1,416 ₹1.1 L | 1,100 ₹88,000 |
| 6.00 | M & L for preparation of old steel surfaces of any description over 10cm width or girth & applying two coats of synthetic enamel paint complete all as specified. | 850 | Sqm | 77 ₹65,450 | 40 ₹34,000 | 40 ₹34,000 | 70 ₹59,500 | 60 ₹51,000 | 40 ₹34,000 | 50 ₹42,500 | 100 ₹85,000 | 70 ₹59,500 |
| 7.00 | Taking down rolling shutters area n.exc 10 sqm each and re-fixing to its original position after cleaning all parts, straightening rails, changing damaged strips, bottom rail,guide rail, helical spring worm gear, lock plate etc as required, greasing, oiling, servicing for smooth functioning of all parts complete all as directed.
Note: Lath strips, bottom rail, spring,gears etc. will be measured and paid seperately as supply only | 5 | Each | 555 ₹2,775 | 1,500 ₹7,500 | 1,500 ₹7,500 | 5,000 ₹25,000 | 3,000 ₹15,000 | 3,000 ₹15,000 | 1,200 ₹6,000 | 4,207 ₹21,035 | 1,200 ₹6,000 |
| 8.00 | All as per item above but area of rolling shutter exc 10Sqm and n.exc 20 Sqm each | 25 | Each | 999 ₹24,975 | 2,000 ₹50,000 | 1,800 ₹45,000 | 6,000 ₹1.5 L | 4,000 ₹1 L | 4,000 ₹1 L | 1,200 ₹30,000 | 8,048 ₹2.0 L | 2,400 ₹60,000 |
| 9.00 | All as per item above but area of rolling shutter exc 20Sqm and n.exc 40 Sqm each | 5 | Each | 1,551 ₹7,755 | 2,500 ₹12,500 | 2,300 ₹11,500 | 8,000 ₹40,000 | 6,000 ₹30,000 | 5,000 ₹25,000 | 1,200 ₹6,000 | 16,420 ₹82,100 | 4,000 ₹20,000 |
| 10.00 | Supply only mild steel spring made out of 6mm to 11mm dia high tension steel wire confirming to IS 4454 having 65 to 100 helical for rolling shutter for smooth working complete all as specified and directed (dia of spring 100mm to 150mm) | 20 | Each | 888 ₹17,760 | 900 ₹18,000 | 500 ₹10,000 | 850 ₹17,000 | 1,200 ₹24,000 | 2,500 ₹50,000 | 400 ₹8,000 | 2,596 ₹51,920 | 300 ₹6,000 |
Tender Value
Refer Docs
EMD Value
₹90,000
Closing Date
1 Jun 2026, 6:00 pmClosed
GE (NW) Mankhurd
GE (NW) Mankhurd
CERTAIN MISC REPAIRS TO FLOORING, HARDSTANDING OTHER RELATED B/R WORKS IN TEMPORARY ACCN AT NSD SEWRI AND OTHER MAINT WORKS BCF NSD SEWRI UNDER GE (NW) MANKHURD.
2026_MES_764308_1
8562/E8
Open Tender
Civil Works
270 days
GE (NW) Mankhurd
As per tender document
8 documents required · 8 mandatory
₹500
GE (NW) Mankhurd
₹90,000
Yes
19 Jun 2026
8 May 2026
3 Jun 2026
8 May 2026
1 Jun 2026
25 May 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | S&F Pre- painted galvalume sheet having aluminum zinc coating with hot dip alloy GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with fixed using hot dip galvanized, self drilling and self tapping screws neoprene and EPDM washers. Penetrations and laps in sheet shall be sealed by using proper sealant profile. HDPE fillers shall be provided wherever required to close voids between sheets, sheet & fastners etc. completely all as specified and directed. upto maximum height of 20 Mtr including scaffolding and all safety equipments if required including Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings as specified.
Note : No additional payment on any account will be considered and only plan area whatever have been provided will be measured. Rate quoted maybe considered including of bending for specific curvature as provided in existing building. | 340 | Sqm | - | - |
| 2 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet in ridge 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified upto maximum height of 20 Mtr including scaffolding and all safety equipments if required including Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings as specified.
Note : No additional payment on any account will be considered and only plan area whatever have been provided will be measured. Rate quoted maybe considered including of bending for specific curvature as provided in existing building. | 80 | Sqm | - | - |
| 3 | S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe 290 gde E-165 including of dismantling of old iron or mild steel work of any description and removing from site complete all as specified and as directed by EIC. | 800 | Kg | - | - |
| 4 | S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors, Gates including Hold fast & Aldrop and related items; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde E-165 including of dismantling of old iron or mild steel work of any description and removing from site complete all as specified and as directed by EIC. | 1,900 | Kg | - | - |
| 5 | S&F as in repairs for 1.0mm Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 with welded or soldered joints including dismantling of old sheet of any thickness complete all as specified and directed by EIC. | 80 | Sqm | - | - |
| 6 | M & L for preparation of old steel surfaces of any description over 10cm width or girth & applying one coat of aluminium paint complete all as specified. | 3,550 | Sqm | - | - |
| 7 | Taking down rolling shutters area n.exc 10 sqm each and re-fixing to its original position after cleaning all parts, straightening rails, changing damaged strips, bottom rail,guide rail, helical spring worm gear, lock plate etc as required, greasing, oiling, servicing for smooth functioning of all parts complete all as directed.
Note: Lath strips, bottom rail, spring,gears etc. will be measured and paid seperately as supply only | 5 | Each | - | - |
| 8 | All as per item above but area of rolling shutter exc 10Sqm and n.exc 20 Sqm each | 25 | Each | - | - |
| 9 | All as per item above but area of rolling shutter exc 20Sqm and n.exc 40 Sqm each | 5 | Each | - | - |
| 10 | Supply only mild steel spring made out of 6mm to 11mm dia high tension steel wire confirming to IS 4454 having 65 to 100 helical for rolling shutter for smooth working complete all as specified and directed (dia of spring 100mm to 150mm) | 20 | Each | - | - |
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.73 MB
8562TENDERPAGES.pdf
Tender Documents • 0.71 MB
BOQ_856070.xls
BOQ • 0.48 MB
Download all tender documents and submit your bid