UPGRADATION AND STRENGTHNING OF JOINT COMMISSIONAR INDUSTRIES OFFICE BUILDING AT GORAKHPUR

Dismantling doors & windows leaves excluding chawkhats inluding stacking of dismantled materials as directed by engineer-in-charge with in distance of 60mts. DSR 15.12.1

Dismantaling wooden boarding in lining of walls and partitions. Excluding supporting mamber but including stacking withi 50 eter lead DRS no. 15.39.3 thickness above 25mm

Dismantling tile work in floor and roof laid in cement motor stacking of dismantled materials as directed by engineer-in-charge with in distance of 60mts. DSR 15.23.1

Dismantling existing plaster including disposal of refuse as directed by Engineer-in-charge with in a distance of 60 mts. DSR 15.56

20% of area

Dismentling brick work including base concrete and stacking of dismantled materials as directed by Engineer-in-charge with distance of 60 mts. …….. Complete item.15.7.4

Dismentling rcc work including base concrete and stacking of dismantled materials as directed by Engineer-in-charge with distance of 60 mts. …….. Complete item

Dismentling Roofing work as G.S. Sheet anstacking of dismantled materials as directed by Engineer-in-charge with distance of 60 mts. …….. Complete item DSR No. 15.28.1

Dismantaling Steel Work Complete item… DSR no. 15.17.2

E/W in excavation in foundation in ordinary soil lift upto 1.50 mt……….complete item.DSR 2.8

Cement Concrete with 4 cm. Gauge approved stone aggregate ,fine sand &cement in proportion of 8:4:1 ……………..complete item. DSR 4.1.8

R.C.C Work with cement, approved coarse sand & 2cm gauge approved stone grit in proportion of 1:1.5:3 in Column , but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centring and shuttering etc. and supply of all materials, labour,Tools & Plants etc. required for proper completion of the work up to plinth level including cost of binding wire.DSR 5.1.2

R.C.C Work with cement, approved coarse sand & 2cm gauge approved stone grit in proportion of 1:1.5:3 in Column , but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centring and shuttering etc. and supply of all materials, labour,Tools & Plants etc. required for proper completion of the work Above plinth level including cost of binding wire.DSR 5.2.2

ms steel work in rcc ….complete dsr 5.22.a.6

centering and shuttering including strutting proping etc removal of form work for

foundation footing base of column etc DSR 5.9.1

column piller piers and struts etc DSR 5.9.6

lintel beams plinth beams and cantilivers etc DSR 5.9.5

suspended floor roof landing balconies and cantiliver etc DSR 5.9.3

M-150 brick work in 1:6Cement & C. Sand Mortar in below plinth beam…Complete Item.sch item no.6.1.2

Class 150 brickwork in 1:4 cement mortor in Super structure DSR 6.4.1

12mm thick cement plaster with 1:4 cement and sand mortor on fair side of wall including all material, labours, T&P etc all complete, DSR 13.4.1

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using Gi slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm Gl adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T. bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.

12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part i and laminated with white 0.16 mm thick fire retardant PVC film on the face side and 12 micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit. DSR NO.12.52.3

Providing and applying white cement based putty of average thickness of 1 mm of approved brand and manufacturer over the wall surface to prepare the surface even and smooth including cost of materials, labours T&P etc all complete.DSR 13.26

Painting with interior or exterior paint over one coat of primer including all materials labours T&P etc all complete.DSR 13.48.1

Finishing with two coat of enemal paint of best quality including all materials, labours, T&P etc all complet.DSR 13.62.1

Providing and fixing of 100mm dia PVC rain water pipe etc all complete.12.41.2

Three track three panels sliding window with two glazed & one wire mesh panels with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body.

Using R2 series with frame (70 mm & above) x (40 mm & above) & both glazed and fly screen sash (25 mm & above) x (50 mm & above) with zinc alloy (zamak) powder coated touch locks with hook. (Height upto 1.2 metre) DSR NO.9.147.A4.1

Providing and laying 600x600mm vitrified tiles (chapter 14 flooring .DSR 11.41.2

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete. (DSR 11.40)

Providing and fixing Ist quality cremicglazed wall tiles complete item DSR No. 8.31

Granite stone slab 18mm thick mirror polished in wall and steps. DSR 11.56.1

Providing and fixing flush door shutter ISI marked decorative type 33mm thick including steel but hinged ….complete DSR 9.20.1

Providing and fixing of double glazed hermetically seald glazing in Aluminium windows,ventilators and partitionetcwith 6 mm thick clear float glass both side,having 12 mm air gap, w including providing EPDM gasket,perforated aluminium spacers,desiccants,sealant(both primiry and secondary sealent) all materials, labours, T&P etc all complete.DSR No-21.1

Prviding and fixing ISI marked MS heavy weight butt hinges (125mm) with necessary screw etc all complete. (DSR 9.56.1)

Prviding and fixing ISI marked Oxidised copper sliding door bolts (size 300x16mm) with necessary nut and bolts etc all complete. (DSR 9.74.1)

Prviding and fixing ISI marked Oxidised MS tower bolts (size 250x10mm) with necessary screw etc all complete. (DSR 9.63.1)

Prviding and fixing ISI marked Oxidised MS Handle (size 125mm) with necessary screw etc all complete. (DSR 9.66.1)

Prviding and fixing ISI marked bright finished brass floor door stopper with necessary screw etc all complete. (DSR 9.82.1)

Providing and fixing aluminium die cast body tubular type universal door closer (IS-3564) with necessary acessories and screw etc complete. (DSR 9.83)

Providing and fixing of Cartain including all fixtures and arrangement etc all complete. MR

Providing and Injecting chemical for pre -constructional antitermite treatment work etc.including supply of all materials, labours and T&P etc all complete.DSR 2.35.3.1

MS tubalar frames for door windows ventilation ….complete item.DSR-10.15.1

All pipe outer dia meter midium quality pipe ,weight taken by steel tabel.

Cleaning of Disposal malwa Distance 3 KM……….Complete item.

Toilet

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. (DSR 18.9.4)

32mm nominal outer dia pipe

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.

Concealed work, including cutting chases and making good the walls etc. (DSR 18.8)

15mm nominal outer dia pipes

20mm Nominal outer dia pipes

25mm Nominal outer dia pipes

Providing and fixing of following dia U-PVC pipeType-B Supreme class ISI marked pipe lines :

110mm dia DSR 12.41.2

Providing and fixing 25mm thick PVC flush door shutter made out of one piece multi chamber extruded PVC section of the size of 762mmx25mm or less as per requirement with an average wall thickness of 1mm etc all omplete. (DSR 9-118-3)

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :

W.C. pan with ISI marked white solid plastic seat and lid (DSR 17.3.1)

Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre &operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitablewater inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge. (DSR 17.80)

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:

White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap. (DSR 17.7A)

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in -charge. (DSR 17.16A)

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :

Circular shape 450 mm dia (DSR 17.32.1)

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : (DSR 18.49.1)

15 mm nominal bore

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 (DSR 18.53.1)

15 mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : (DSR 18.17.1)

25 mm nominal bore

40mm thick 1:2:4 plain cement concrete floor, laid in panels finished with 3mm floating coat of neat cement of cement and marble dust in ration 5:1 including all materials, labours, T&P etc all complete.DSR 11.3.1

providing and applying water proofing treatment as asian water profing solution .complete all labour and material MR

providing and fixing wall panelling pvc material with material and labour complete . MR

Providing and fixing 12 mm thick frameless toufound glass ..complete item.. DSR No. 21.18

providing and laying Iterlocking tiles Dsr no.16.91.2

providing and fixing blinds for window… complete item. MR

Less 5% due to Departmetal Charge

Please Enable Macros to View BoQ information