REPAIR MAINTENANCE TO FLOORING ,ROOFING,JOINERY AND ALLIED BR WORKS INCLUDING PERIODICAL SERVICES TO CERTAIN BUILDINGS AT SONAMARG, GUND AND MANASBAL UNDER GE 970 EWS

Amount

Demolition of cement concrete (unreinforced) in ground floors and paving not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed

M&L for 25mm thick Cement concrete 1:2:4 type B-0 using 12.5 mm graded stone aggregate in leveling course, benching etc, finished even & rough to receive cement mortar screed bed complete all as specified and directed

Material & labour for coloured ceramic joint less non skid tiles 7 to 8mm thick, as approved, polished area of each tiles exc 0.06 Sqm but n.exc. 0.011 Sqm (square/ rectangular) as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over & including screed bed 15mm thick in cement mortar (1:6) including Dismantling floor, hearth or wall tiling/ china moisac including cement mortar bedding (but not backing), removing rubbish off outside MD land complete all as specified and directed.

Material & labour for Glazed ceramic coloured tiles 300 x 200 x 6 to 7 mm thick, in skirting, dados, risers to steps, etc set and jointed in neat cement slurry and pointed in coloured cement to match tiles over and including 10 mm thick screed bed or bedding layer in CM (1:4) including Dismantling floor, hearth or wall tiling/ china moisac including cement mortar bedding (but not backing), removing rubbish off outside MD land complete all as specified and directed.

Material & labour for Brick work with sub class ‘B’ old size bricks, straight or curved on plan exceeding 6 m mean radius, built in cement mortar in CM 1:4 incl Demolition of brick work built in cement or cement lime mortar complete all as specified and directed

Taking down cement or cement lime plaster, any description, on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etccomplete all as specified and directed

Material & labour for Rendering 15 mm thick in cement mortar 1:4 on faces of brick work or concrete surfaces, finished even & smooth complete all as specified and directed

Material & labour for Rendering 15 mm thick in cement mortar 1:6 on faces of brick work or concrete surfaces, finished even & smooth complete all as specified and directed

Preparing new plastered or unplastered surfaces of walls and applying two coats of cement base paint over a coat of primer after preparation of surfaces complete all as specified and directed

Preparing new plastered or unplastered surfaces of walls and applying two coats of oil bound distemper in approved colour/shade over a coat of primer after preparation of surfaces complete all as specified and directed

M&L for preparing old decorated plastered surfaces of wall including cornices,pilastered etc. by brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and applying one coat of cement base paint on wall surface complete all as specified and directed

M&L for preparing old decorated plastered surfaces of wall including cornices,pilastered etc. by brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and applying one coat of oil bound distemper on wall surface (approved colour/ shade) complete all as specified and directed

M&L for preparing old decorated plastered surfaces of wall including cornices,pilastered etc. by brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and applying one coat of white wash on wall surface complete all as specified and directed

M&L for preparation of old steel surfaces of any description(roof CGI/PGI sheets), over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed

M&L for complete removal of existing treatment from walls (any number of layers) by scrapping with steel scrappers or any other means, including filling depressions of scrapped surfaces and applying two coats of oil bound distemper over and including a coat of 2mm thick wall care putty (Make:- JK/Birla) with preparation of plastered surfaces complete all as specified and directed. Note: The time difference between one coat and two coat will be decided by Engineer-in-Charge.

M&L for preparation of old wood and wood based materials surfaces of any description, over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed

Supply & fix pre-painted galvalume aluminum zinc coating GI Based corrugated steel sheet 0.50 mm thick of any having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws incl dismantling existing old sheet any type complete all as specified & directed.

Supply & fix pre-painted galvalume aluminum zinc coating GI Based plain steel sheet 0.50 mm thick of any having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws incl dismantling existing old sheet any type complete all as specified & directed.

S&F in repair Veneered decorative ply wood, 6 mm thick, grade I (with BWR resin), decorative face veneers on one face fixed with nails to timber frame work in wall, ceiling, flat or sloping incl dismantling wall and ceiling boards fibre, pulp insulation etc or insulation boards/slabs/blankets, any thickness, including cover fillets all as specified and directed

S&F in repair for 2nd class hard wood plain fillets, sectional area exceeding 3 sqcm but not exc 6 sqcm, rectangular or triangular in section, clean sawn, secured with nails all as specified and as directed

M&L for Second class Soft-wood in scantlings, clean sawn, timber fixed, incl dismantling scantling 40 Sqcm and above complete all as specified and directed

Taking down chowkhat with shutters (without taking off shutters from the frame) n exc. 1.50 Sqm complete all as specified and directed

Taking down chowkhat with shutters (without taking off shutters from the frame) exc. 1.50 Sqm but n exc. 4 Sqm complete all as specified and directed

S&F plain , solid , straight chowkat and frames , wrought , framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints in 2nd class Hard wood complete all as specified and directed

S&F factory made 35mm thick 2nd class soft wood gauged/glazed skeleton shutter for door/window open rebated and prepared to receive glass gauge etc. edges of framing plain, chamfered or rounded , fitted with cuts and mitred beads for securing glass etc. sizes of members of shuttered as specified in ssr part- I section -8 clause 8.23 (b). complete all as specified and directed

S&F factory made 30mm thick 2nd class soft wood gauged/glazed skeleton shutters for door/window open rebated and prepared to receive glass gauge etc.edges of framing plain, chamfered or rounded , fitted with cuts and mitred beads for securing glass etc. sizes of members of shuttered as specified in ssr part- I section -8 clause 8.23 (b). complete all as specified and directed

S&F factory made 35 mm thick II nd class Softwood plain framed panelled shutter ( two panels) with panels of timber flat on both sides feather edged, or of veneered particle board medium density or particle board with commercial face complete all as specified and directed

S&F mild steel wire cloth galvanized 0.63mm normal dia of wire and average width of aperture 1.4mm complete all as specified and directed

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in squares n exc. 0.50 Sqm in each panes complete all as specified and directed

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in square n exc. 0.5 Sqm in each pane including hacking out of glass panes complete all as specified and directed

Preparing new surfaces of wood and wood based materials of any description over 10 cm in width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed

S&F in repair 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy.complete all as specified and directed

S&F in repair Aluminium handles, cast type anodised150mm size complete all as specified and directed

S&F in repair Aluminium handles, cast type anodised 100mm size complete all as specified and directed

S&F in repair 200 mm long alluminiuml tower bolt, complete all as specified and directed

S&F in repair 100 mm long alluminiuml tower bolt, complete all as specified and directed

S&F in repair MS 120 mm size butt hinges medium wt. of cold rolled complete all as specified and directed

S&F in repair MS 100 mm size butt hinges medium wt. of cold rolled complete all as specified and directed

S&F in repair 140mm floor door stopper anodised aluminium body and tongue with hard drawn steel spring complete all as specified and directed

M&L for preparing old decorated plastered surfaces of ceiling including cornices,pilastered etc by brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and applying one coat of white wash on ceiling complete all as specified and directed

M&L preparation of old surfaces of walls and applying two coat of exterior acrylic emulsion polymer base paint (Apex) in approved colour, complete all as specified and directed

M&L for re-writing letter or figures (Block, Roman, Italic or Indian) with fluorescent paint height of letter exceeding 15 cm but not exceeding30 cm & width of letter exceeding 25mm but not exceeding 40mm wide complete all as specified and directed.

M&L preperation of old decorated surface of Steel sheet (corrugated or semi corrugated) roof of any description by brooming down or steel wire brushing, washing with water and removal of rubbish from roof surfaces and applyingTwo coat of synthetic enamel paint in approved colour/ shade/camuflauge pattern after preparation of surfaces complete all as specified and directed

Taking down cement or cement lime plaster, any description, on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etccomplete all as specified and directed

Rendering 10 mm thick in cement mortar 1:6 on faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed

Rendering 5 mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished fair & even complete all as specified and directed

Rendering 15 mm thick in cement mortar 1:4 on faces of brick work or concrete surfaces, mised with water proofing compound @ 3% by weight of cement, finished fair and even complete all as specified and directed

Supply only water proofing compound, complete all as specified and directed

Preparing new plastered or unplastered surfaces of ceiling and applying three coats of white wash incl preparation of surface complete all as specified and directed

Preparing new plastered or unplastered surfaces of wall and applying three coats of white wash incl preparation of surface complete all as specified and directed

M/S Manzoor and Co

M/S GHULAM AHMAD WANI

M/S FAYAZ AHMAD BHAT

M/s Nasir Rasool Dar

M/S LATIF AHMAD BABA CONSTRUCTION

SOFI CONSTRUCTIONS

M/S Thakur & Sons

M/s Bashir Enterprises