PROVISION OF PERIPHERY WALL WITH CONCRETE JALLI LIGHTENING ARRANGEMENT AND CHAIN LINK FENCING ON 05 ACRES ICG LAND BHUBANESWAR UNDER GE I CG BHUBANESWAR

Amount

SCH 'A' PART-I (B/R PORTION) Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation, etc., and getting out in Hard/ Dense soil complete all as specified and directed.

Removing Excavated soils exceeding 250 M but not exceeding 500 M and depositing where directed at a level not exceeding 1.5 M above the starting point complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick with soils complete all as specified and directed.

M&L Plain Cement Concrete Type D2 1:4:8 (using 40 mm graded granite stone aggregate) in foundations, filling and mass concrete complete all as specified and directed.

M&L Brick work with fly ash bricks, straight or curved on plan exc 6m mean radius in built in cement mortar (1:6) complete all as specified and as directed.

M & L for rendering 15mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaceto receved the wall tile complete all as specified and directed.

M & L for plain Cement Concrete type B1 1:2:4 (using 20 mm graded granite stone aggregate) cast in situ in lintel upto 1.50 m span cill and other similar band,plinth course,parapet,couping,bed plate and the like complete all as specified and directed

Mild steel deformed TMT bars, 10 mm dia and over cut to length bent to shape required , including cranking , bending, spirally for hooping for columns , hooking ends and binding with mild steel wire (annealed) not less 0.9mm dia of securing with clips complete all as specified and directed.

All as per item No 8.00 hereinbefore but 5 mm dia and above upto and includinding 10mm dia in stirrups,spacers and binders complete all as specified and directed

M&L RCC 1:1.5:3 (20 mm graded stone aggregate) concrete in RCC bend , beams,cantilever, bressummers, lintel over 1.5 m span complete all as specified and directed.

M&L for form work to sides and soffits of RCC bend ,cantilever, lintel etc complete all as specified and directed.

S&F for (Glass reinforced Concrete) GRC Jali 10-15 mm thick of any design as approved by Engineer-in-Charge complete all as specified and directed.

M & L framed work with Stainless Steel pipe of Square/rectangular/round or any section for gates, grills, gratings etc with ends of bars shouldered and/or riveted or froged into spikes etc for ornamental designed gate, Arch and wicket gate complete all as specified and directed.

S&F of stainless steel of gauge 1mm sheet letter size of width of each letter 20 CM width and 30 CM height,2 cm thick fixed on wall complete all as specified and directed

S&F of stainless steel of gauge 1mm sheet for logo of Indian Coast Guard of size overall 300x400mm in rectangular or 400 mm in dia in circular on wall complete all as specified and directed

S&f exterior wall cladding tiles in vertical surface of area of each tiles not exe 0.09 Sqm set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed

Excavation in post holes (or similar holes) in hard/dense soil each n exc 0.5 Cu. M, getting out, returning, filling in and ramming earth or broken rubble mixed with eartharound ,in layers not exceeding 25 cm complete all as specified and directed.

M&L for Plain Cement Concrete Type D2 1:4:8 (using 40 mm graded granite stone aggregate) in foundations, filling and mass concrete complete all as specified and directed.

M&L cement concrete type C2 1:3:6( using 40 mm graded stone aggregate) as in bed block of post any thickness size or shape including pilaster,buttress coulmn ,pillars boundary pillars and post including cap and basescomplete all as specified and directed.

S&F mild steel angle iron/ flat iron/ round bar as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc. and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed.

S&F for Mild steel screw bolts of diameter of neck in 11-15 mm (machine made)with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end screwed end to be fitted with washers and one hexagonal or square nut, n. exc 5 cm long complete all as specified and directed.

S&F galvanised and PVC coated chain link fencing inter winded (Low carbon steel wire heat treated zinc coated (zinc+PVC of diametre of GI wire 2.5 mm and 1.5 mm PVC coating over all 4.00 mm dia and size of mesh 50X50 mm rust proof ,duarable etc complete all as specified as directed.

M&L for RCC 1:1.5:3 20 mm graded stone aggregate for foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under reamed piles and mass concrete complete all as specified and directed.

M&L for RCC 1:1.5:3 20 mm graded stone aggregate Columns, pillars,piers,posts and struts etc complete all as specified and directed.

M & L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.

Formwork to sides of pillars, posts, struts, piers, columns, and stanchions complete all as specified and directed.

M & L for Mild steel deformed TMT bars, 10 mm dia and over cut to length bent to shape required , including cranking , bending, spirally for hooping for columns , hooking ends and binding with mild steel wire (annealed) not less 0.9mm dia of securing with clips complete all as specified and directed.

All as per item No 27.00 hereinbefore but 5 mm dia and over upto and incl. 10 mm dia in stirrups,spaces and binder

S&F for framed work such as gate,grills,grating etc with end bar shoulder and/or riveted similarwork Fe-290.Gde-E-165 complete all as specified and directed

M&L for two coats of synthetic enamel paint over one coat of red oxide paint of steel new surface complete all as specified and directed

M&L for two coats of synthetic enamel paint over one coat of red oxide surfaces of any description, n.exc 10cm in width or girth of new steel surfaces complete all as specified and directed.

M&L for acrylic emulsion paint over new plastered surfaces complete all as specified and directed.

SCH 'A' PART-II (E/M PORTION) Supply and fixing of GI tubing medium grade of 50 mm dia fixed on wall/floor etc complete with necessary clamp, nut, bolts and washers and socket and making good the disturbed surface of wall , floor or roof etc complete all as specified and directed.

Supply and fixing of Post -top light , new generation, energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire eith high power LED suitable for 15 W LED sutable for highlighting srchitectual feature complete all as specified and directed.Make Havells Cat No CORALMINIPT15WLED757PSYMTOPC or similar makes as mentioned in PS.

Supply and Laying inreplacement of XLPE LT UG cable PVC insulated , bedded armoured heavy duty electric cable 1100 volts grade with aluminum conductor of 10 Sq mm 2 core in trenches or fixed on wall/floor/poles complete all as specified and directed.

S&F MCB distrubution board,SPN double door,sheet steel,phosphatised,power painted with 200 amps bus-bar,neutral link,earth bar and din rail 240V,4 way complete all as specified and directed.

Supply and Fixing only MCB SPN,240V,6 Amp to 32 Amps,10KA complete all as specified and directed.

Supply and Fixing only MCB SP,240V,6 Amp to 32 Amps10KA complete all as specified and directed.

Supply and fix PVC (thermo plastic) street light junction box heavy duty with locking arrangement including 2 Nos of aluminium bus bar for 2 way connector suitable for 10/6 Sqmm cable connection incl alongwith necessary MS clamp nut bolts and washers complete all as specified and directed.

S & F in replacement PVC flat twin core cable with aluminium conductor 2.5 sq mm for flood light connection with logs complete all as specified and directed.

Excavation in trenches in soft/loose soil n.exc 1.5m wide and n. exc 1.5m depth getting out of soil for taking out or laying of pipe line etc complete all as specified and directedfor laying of cable, errection of poles, stay and pipe line, complete all as specified and as directed.

Returning & filling including spreading, leveling watering and well ramming in layers n. exc 25 cm thick in any type of soil complete all as specified and directed.

Removal of surplus soil to a distance n. exc 50 m above the starting point complete all as specified and directed.

M&L for laying of bricks locally available sub class 'B' bricks (old size) for cable protection cover laid flat and dry in trenches over the cable prependicular to the direction of cable complete all as specified and directed

M&L for local sand coushioning with dry and clean over and under the cable for protection of cable , 80 mm sand laid before laying the cable 150 mm sand after laying the cable complete all as specified and directed.

M&L for earthing complete with galvanised steel plate earth electrode of size 60cmx 60cmx6mm thick, burried in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of the plate not less than 1.5 m below normal ground level, connected with GI wire 4 mm dia earth lead by means of nuts, bolts,check nuts and washers and galvanised iron of steel 15mm bore pipe medium grade for protection connected to main switch board or main control board all as specified and directed including , 20mm dia GI pipe medium grade for watering,funnel with wire mesh, PCC pit with RCC cover including necessary earth work excavation and removal etc complete all as specified in plate No 3 of SSR Part-I 2009 complete all as specified and directed.

ODRA NIRMAN

M/S ABHISHEK JENA