Savithri Nagr Pipe line

Amount

2.10.1.2 Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer byramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m - all kinds of soil - pipes,cables etc , exceeding 80mm dia but not exceeding 300 mm dia.

2.27 Supplying and filling in plinth with river sand under floors, including watering, ramming consolidating and dressing complete.

2.6.1A Earthwork in excacavation over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth lead upto 50m and lift upto 1.5m - disposed earth to be levelled and neatly dresses - all kinds of soil.

4.1.10 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plith level - 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40mm nominal size).

4.1.3 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plith level - 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size).

4.1.2 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plith level - 1:1.5:3 (1 cement : 1.5 coarse sand :3 graded stone aggregate 20mm nominal size).

4.3.2 Centring and shuttering including strutting, propping etc. and removal of form work for - retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc.

4.7.1 Providing and fixing upto floor five level precast cement concrete solid block, inlcuding hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand) cost of required centering,shuttering complete - 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size).

5.22.7 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level – Thermo -Mechanically treated bars (ISI BRAND OF APPROVED MAKE) Fe - 415 or more.

31.161.1J Providing, laying and jointing UPVC pipes (Finolex /jain/ Supreme / Truebore / Nandi) (0.6 Mpa) conforming to IS specification 4985 and ISI marked including transportation to the site, lowering to the trenches, laying to proper grade and alignment, testing of joints with required testing equipment, including cost of solvent cement, excluding UPVC specials such as bends, tees, threaded pieces, couplers, reducer, endcaps etc., complete all as per IS and CPWD specification. - 200mm dia.

31.161.1H Providing, laying and jointing UPVC pipes (Finolex / jain / Supreme / Truebore / Nandi) (0.6 Mpa)conforming to IS specification 4985 and ISI marked including transportation to the site, lowering to the trenches, laying to proper grade and alignment, testing of joints with required testing equipment, including cost of solvent cement,excluding UPVC specials such as bends,tees, threaded pieces, couplers, reducer, endcaps etc., complete all as per IS and CPWD specification. - 160mm dia.

31.175.1F Providing and fixing in position UPVC fabricated coupler (Finolex / jain)(0.6 Mpa) conforming to IS 7834 part II and ISI marked,including labour charges for jointing, jointing materials etc, complete - 160 mm dia.

31.128.1C Providing and laying Cast Iron Double flanged pipe conforming to IS specification 1537&7181 and ISI marked suitable for flanged joints in good condition including transportation of C.I.pipe from production centre/company to the site at UT of Puducherry, lowering to the trenches(or fixing in over head tanks above ground level) laying to proper grade and alignment, testing of joints with required testing equipment etc.,complete all as per IS 3114 and CPWD specification .(earth work and jointing of pipes with rubber insertion will be paid separately) -150mm dia.

31.130.A Providing and laying in position flanged C.I. specials such as tees, bends, collors, tapers, caps etc.conforming to IS specification 1538 and ISI marked - 80 to 200mm dia.

31.300.1A Supply and installation of DI D/F Gate Valves (Soft seated ) Resilient seated soft sealing gate valves (Sluice valves ) (Make VAG, AVK, Fouress) with body bonnet of ductile iron of grade GGG 40, wedge fully rubber lined EPDM of good quality W720, replaceable spindle nut, without gland packing and with 3 O-ring protection on the shaft and seals of NBR and the valves should be vacuum tight and 100% leak proof with face to face dimensions as per BSS 163-89/ISI 4846 - 2000/DIN3202 F4. All the valves should be Electrostatic powder coated both inside outside with pocket less straight thro body passage. All the valves shall be compatible for burried application without chambers, with pressure rating PN 10/16 - dia 150mm.

31.153.1G Providing and fixing mild steel flange including bolts, nuts, rubber insertion, labour charges etc,complete-150mmdia 31.154.1A Providing and fixing reducing mild steel no 919.29 flange including necessary bolts, nuts, rubber insertion, labour charges etc, complete-100 x 80mm dia.

31.172.1F Providing and fixing in position UPVC moulded tail piece without flange (Finolex / jain) (0.6 Mpa)conforming to IS 7834 part II and ISI marked,including labour charges for jointing, jointing materials etc,complete - 160 mm dia.

31.178.1F Providing and fixing in position UPVC fabricated bend (Finolex/ jain) (0.6 Mpa) conforming to IS 7834 part II and ISI marked, including labour charges for jointing, jointing materials etc, complete -160 mm dia.

31.178.1H Providing and fixing in position UPVC fabricated bend (Finolex/ jain) (0.6 Mpa) conforming to IS 7834 part II and ISI marked, including labour charges for jointing, jointing materials etc, complete - 200 mm dia.

31.175.1H Providing and fixing in position UPVC fabricated coupler (Finolex / jain) (0.6 Mpa) conforming to IS 7834 part II and ISI marked,including labour charges for jointing, jointing materials etc, complete - 200 mm dia.

31.164.1N Providing and fixing in position UPVC moulded equal Tee (Finolex / jain) (0.6 Mpa) conforming to IS 7834 part II and ISI marked, including labour charges for jointing, jointing materials etc, complete-160mm dia.

31.47.4 Providing flanged joints to double flanged C.I./D.I. pipes and specials including necessary bolts, nuts, rubber insertion and testing of joints etc., complete - 150mm diameter pipe.

31.167.1M Providing and fixing in position UPVC moulded reducer coupler (Finolex/ jain) (0.6 Mpa) conforming to IS 7834 part II and ISI marked,including labour charges for jointing, jointing materials etc, complete - 160 x 140mm dia.

15.2.1 Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead – nominal concrete 1:3:6 or richer mix (i/c equivalent design mix).

15.2.2 Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead Nominal concrete 1:4:8 or leaner mix (including equivalent design mix).

15.5 Extra for cutting reinforcement bars manually / by mechanical means in R.C.C or R.B work (payment shall be made on the cross sectional area of R.C.C. or R.B.work).

31.48.3D Providing and fixing C.I. sluice valve (PN 1.6) (with cap) conforming to IS 14846 and ISI marked, with bolts, nuts, rubber insertion etc., complete (the tail pieces if required will be paid separately) - 150 mm dia.

vankayala Narendra