Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.4 LAccepted-AOC | L1 | Accepted-AOC Work ORder Issued |
Tender Value
₹2.8 L
EMD Value
₹5,532
Closing Date
6 Jan 2020, 9:00 amClosed
EE PWD Yanam
Chinta Street, Yanam
Urgent repairs to the Temporary Mess of Sports Authority of India Training centre at PWD water works campus in Yanam
2019_PWDC2_5532_1
106/EEY/2019-20
Open Tender
Civil Works
Works
30 days
Yanam
Please refer Tender documents.
2 documents required · 2 mandatory
₹525
EE PWD Yanam
₹5,532
20 Jan 2020
31 Dec 2019
6 Jan 2020
31 Dec 2019
6 Jan 2020
31 Dec 2019
Amount
2.6.1 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth,1.5m in width as well as 10 sqm on plan) including disposal of excavated earth lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed.- All kinds of soil.
2.27 Supplying and filling in plinth with sand under floors including, watering, ramming consolidating and dressing complete.
4.1.10 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering.- All work upto plinth level -1:5:10 (1 cement:5coarse sand : 10 graded stone aggregate 40mm nominal size).
11.3.1 Cement concrete flooring 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete. 40mm thick with 20mm nominal size stone aggregate.
5.1.2 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of entering, shuttering, finishing and reinforcement -All work upto plinth level :1:1.5:3 (1 cement : 1 .5 coarse sand : 3 graded stone aggregate 20mm nominal size).
5.9.1 Centring and shuttering including strutting, propping etc.and removal of form for: Foundations , footings, bases of columns ,etc. for mass concrete.- Using steel sheet with M.S.frames.
5.22.6 Reinforcement for R.C.C work including straightening , cutting , bending , placing in position and binding all complete - Thermo - Mechanically treated bars (TISCON / VIZAG / IISCO /SAIL / JSW) including placing the M30 grade Athees make cover block @ 60cm centre to centre.
10.27 Supplying and fixing of steel grill work of m.s. angles,flats,squares and pipes including cost of welding charges, fixing in position in masonry walls with cement concrete 1:2:4 (1 cement : 2 course sand : 4 graded stone aggregate 12.5mm nnominal size) including one coat of priming coat etc. complete.
6.2.1 Brick work with modular bricks of class designation 35 in foundation and plinth in cement mortar 1:4 (1 cement: 4 coarse sand).
6.4.1 Brick work with FPS bricks of class designation 35 in superstructure above plinth level upto floor V level in all shapes and sizes in cement mortar 1:4 (1 cement: 4 coarse sand).
14.53.1C Wall painting with plastic emulsion paint - Commercial of approved brand and manufacture to give an even shade - One or more coats on old work.
13.1.1 12mm cement plaster of mix :Cement Mortor 1:4 (1 cement : 4 fine sand).
14.54.1 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade - One or more coats on old work.
18.15.1 Providing and fixing brass bib cock of approved quality - 15 mm nominal bore.
31.161.1H Providing, laying and jointing UPVC pipes(Finolex/Jain) (0.6 Mpa)conforming to IS specification 4985 and ISI marked including transportation to the site , lowering to the trenches, laying to proper grade and alignment, testing of joints with required testing equipment,including cost of solvent cement,excluding UPVC specials such as bends,tees, threaded ieces,couplers, reducer, endcaps etc.,complete all as per IS and CPWD specification. - 160mm dia.
15.2.1 Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead - 1:3:6 or richer mix.
12.41.2 Providing and fixing on wall face unplasticised rigid PVC rain water pipes conforming to IS : 13592 type A including jointing with seal ring conforming to IS : 5382 leaving 10mm gap for thermal expansion, (i) single socketed pipes. 110mm dia meter.
12.42.5.2 Providing and fixing on wall face unplasticised- PVC moulded fittings / accessories for unplasticised rigid rain water pipes conforming to IS : type A including jointing with seal PVC 13592 ring conforming to IS : 5382 leaving 10mm gap for thermal expansion. Bend 87.5deg. bend. 110mm.
12.43.2 Providing and fixing unplasticised - PVC clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4(1 cement : 4 coarse sand) and making good the wall etc. complete. 110mm.
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .