CA NO GE SU 54 2021 22 ADDN ALTN TO BLDG NO T 01 PROVN OF RETAINING WALL NEAR GUARD REST ROOM AT HELIPAD COLONY PROVN OF HARD STANDING AND ALLIED WORK NEAR BIKRAM PARK PROVN FOR BMW BAY AND WALL TILING OF GARBAGE COLLECTION AT CM

Amount

Excavation in trenches not exceeding 1.5 m wide & not exceeding 1.5 m in depth for foundations etc and getting out as in hard/dense soil complete all as specified and directed.

Surface excavation n. exc (not exceedin) 30 cm deep and averaging 15 cm deep and getting out in hard/dense soil complete all as specified and directed.

Excavation in post holes each not exceeding 0.50 cum getting out, returning filling in and well ramming earth around in layers not exceeding 25cm, watering and removing surplus soil to a distance exceeding 1.5 kilo mtr and making good distrub surfaces as in hard/dense soil complete all as specified and directed.

Returning filling in including spreading, levelling, watering and well ramming in layers n exc 25 cm thick as in soft/disintegrated rock complete all as specified and directed.

Removing excavated material exc 250m but n.exc 500 m and deposited where directed at a level not exc 1.50m above the starting point complete all as specified and directed.

Removing excavated soil material to a distance exc 50m and depositing at a level not exc. 1.5m above the base in soil complete all as specified and directed.

Demolition cement concrete in ground floors and paving ( unreinforced ) nexc. 15 cm thickness ( below or above ground floor) complete all as specified and directed.

Demolition of brick or stone masonary including all necessary arches, pillars, quions etc built in cement mortar complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed

Dismantling old serviceable/unserviceable barbed wire including removing of unserviceable barbed wire from site and serviceable materials kept in safe custody for re-use complete all as specified and directed.

Dismantling wall and ceiling boards (fibre,pulp, insulation etc) or insulation boards any thickness including cover fillets complete all as specified and directed.

Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish of the premises complete all as specified and directed.

Dismanttling of plain or corrugated steel sheetings any thicness as in roof coverings complete all as specified and directed.

Taking down cement plaster and raking out joints, hacking for key,scrubbing down with water built in cement mortar any description complete all as specified and directed.

Brick work with sub class 'B' brick straight or curved on plan exc 6m radious in CM 1:4 as in brick work/brick pillars etc. complete all as specified and directed.

Brick work with sub class 'B' brick straight or curved on plan exc 6m radious in CM 1:6 as in brick work/brick pillars etc. complete all as specified and directed.

15 mm thick rendering on fair faces of brick or concrete surfaces in Cm 1:6 and finishing the surfaces even and smooth without using extra cement.

Hardcore with broken stone or boulders of gauge n. exc 63 mm deposited, spread and levelled in layers n. exc 15 cm thick, watered and rammed to a true surfaces complete all as specified and directed.

Sand cushioning/filling under floors or laying interlocking tiles complete all as specified and directed.

Continous Brick edging with width equals to width of bricks, laid dry on edge vertically, complete all as specified and directed.

Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar (1:6) complete all as specified and directed.

All as per item No 21 above but except stones complete all as specified and directed.

Extra over stone walling for hammer dressing with maximum depression on face from straight edge held against the dressed surface n.exc 40 mm to face stones and dressing of face beds and joints, as specified of random rubble walling uncoursed or brought up to courses complete all as specified and directed.

Keyed pointing to random or polygonal rubble, uncourse or brought upto courses CM 1:3 complete all as specified and directed.

PCC (1:4:8) type-D2 using 40 mm graded stone aggregate as in foundations and mass concrete complete all as specified and directed.

Providing cement concrete 1:2:4 type B-0 in steps, seismic and other similar bands, parapets and railings up to 60 cm in hieght, coping, kneeless apex stones , bed plates, kerbs not provided for including weathering, slightly rounded or chamfered angles complete all as specified and directed.

PCC (1:4:8) type D-2 as in foundation, filling & mass concrete for in fixing MS bed plates fixed with MS Tubular post complete all as specified and directed.

M&L PCC 1:2:4 Type B1( using 20 mm graded crushed stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs etc complete all as specified and directed.

Cement concrete 75 mm thick in sub-base type D-2(1:4:8) (40 mm graded crushed stone aggregate) complete all as specified and directed.

M&L for cement concrete 1:3:6 type C1 (20mm graded aggregate) as in surface channels and drains including necessary formwork etc complete all as specified and directed.

Cement Concrete 1:4:8, type D-2 using 40mm graded crushed stone aggregates in bed to 200mm drain pipes incl packing under and haunching againist the sides pipesafter they are laid and tested complete all as specified and directed.

100 mm thick cement concrete (1:4:8) type D2 as sub base to floor complete all as specified and directed.

PCC (1:2:4) type B-2 (40 mm graded aggregate as in fdn, filling in post holes complete all as specified and directed.

PCC (1:2:4) type B-0 12.50 mm thick (12.5 mm graded aggregate) as in coping including fixing broken glass pieces on PCC coping, on compound wall, (sizes and intermediate distance between two broken glass pieces will be complete all as specified and directed and approved by GE).

25mm thick PCC type B-0(using 12.5mm graded stone aggregate) as in sub base for receiving floor finishes complete all as specified and directed.

Providing Precast cement concrete 1:2:4 type B-1 (20mm graded aggregate ) as in manholes cover slab etc complete all as specified and directed.

75 mm thick plain cement concrete, type C-2, (1:3:6) using 40 mm graded aggregate as in plinth protection complete all as specified and directed.

5mm thick CM 1:4 rendering on fair surfaces of ceiling work and finished even and smooth without using extra cement all as specified

Rendering 15 mm thick on fair faces of brick work in cm 1:6 finished even and smooth without using extra cement complete all as specified and directed.

15mm thick rendering in CM 1: 4 on fair faces of brick work or concrete surfaces for backing coat for tiles complete all as specified and directed.

20mm thick screed bed or bedding layer in cement mortar 1:4 for laying floor finishes complete all as specified and directed.

Screed bed or bedding layers of 15mm thick cement mortar 1:4 for laying floor finishes complete all as specified and directed.

Material and labour for providing Reinforced Cement Concrete design mix M-25 using 20 mm graded aggregate as in foundation including rafts, footings, foundation beams, plinth beams, bases of columns etc complete all as specified and directed.

Material and labour for providing Reinforced Cement Concrete design mix M-25 using 20 mm graded aggregate as in columns, pillars, piers, posts and struts complete all as specified and directed.

Material and labour for providing Reinforced Cement Concrete design mix M-25 using 20 mm graded aggregate as in beams, cantilever, lintels over 1.5 m complete all as specified and directed.

Material and labour for providing Reinforced Cement Concrete design mix M-25 using 20 mm graded aggregate as in slabs supported on walls, beams and columns in floor, roof, landing, balcknies, conopies, decks, slab and in shelves and like complete all as specified and directed.

Use and waste formwork to sides of concrete foundation footings base of coloumns sides and soffits (if any) of foundation and plinth beams, and similar work vertical or to batter for rough finished flat surface of concrete complete all as specified and directed.

Use and waste formwork to sides of columns, pillars, posts, struts, piers and stanchions, rectangular or square for rough finished flat surfaces of concrete complete all as specified and directed.

Formwork to flat sides and soffits of or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams complete all as specified and directed.

Formwork to soffits of suspended flat slabs such as roof slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

Formwork to edges of concrete flats, treads breaks in floors, window cills, concrete railings,openings in concrete walls, floor and roofs n exc 20cm wide and sides of RCC/PCC bands in wall, horizontal or sloping and similar work exc 10 cm but n.exc 20 cm wide complete all as specified and directed.

M&L for 10 mm thick rendering on fair faces of brick /concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement complete all as specified and directed.

M&L for 15 mm thick rendering in two layers (10mm + 5mm) on fair faces of brick/concrete or stone surfaces in cement mortar 1:4 and finished even and smooth without using extra cement complete with water proofing compound complete all as specified and directed. (WPC shall be measured separtely).

Supply only Liquid water proofing compound complete all as specified and directed.

Dura stone tiles of size 305mmx305mmx10 mm thick as in floors set and jointed in neat cement slurry and pointed in coloured cement to match the surface of tiles complete all as specified and directed. (Note :Shade/colour as approved by GE)

Double charge, dark shade vitrified ceramic tiles, area of each tile n.exc 0.36 Sqm, 10 mm thick (square or rectangular) of superior quality as in floor and walls surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match the light shade of tiles complete all as specified and directed.

All as per item No. 56 above but on skirtings/dado/vertical surfaces of walls, complete all as specified and as directed.

Non skilled coloured ceramic tiles (Square/rectangular) 7 to 8 mm thick, area of each tile exc 0.11 sqm bu tnot exc 0.18 sqm as in floors, set and jointed in neat cement slurry nand pointed in while or coloured cement to match the surface, complete all as specified and directed

Glazed coloured ceramic tiles in vertical surface 300 x 450 x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the surface complete all as specified and directed.

Machine pressed precast concrete interlocking paver blocks lacquor finish any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 grade with grey cement and pigment all as specified and directed

Lacquar coated Chequered tiles 30 cm x 30 cm x 20-25 mm thick, set jointed and pointed in neat cement slurry as in path with white cement and pigment etc complete all as specified and directed.

Pre painted galvalume aluminium zinc coating GI based corrogated steel sheet 0.50mm thick crimpted/tapard at the external end slop of any colour having tansile strength 550 Mpa as in roof covering fixed with self tapping screws and caps etc complete all as specified and directed.

Pre-painted plain galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick in ridges, hips, valley gutters at the external end slop of any colour having tansile strength 550 Mpa as in roof(ridges) covering fixed with self tapping screws and caps etc complete all as specified and directed.

Cement concrete 1:4:8 type D-2 (40mm graded aggregate) in bed to 150mm dia pipes incl packing under, and hunching against the sides of pipes after they are laid and tested for complete all as specified

Roof trusses (framed) trussed, purlins, crane gantries rails and fastenings and heavy brackets, post, eves board incl frame work and similar work framing (beam, tee, channel or flat sections) including distance pieces cleats including welding reavrign etc. complete all as specified and directed.

MS flat iron as in wind ties etc confirming to fe 410-0 or Fe 310-0 including clamps complete all as specified and directed.

MS flat iron as in wind ties, securing bolts post and struts in fencing including cutting tops to shape as directed, drilled holes knotching for wiresetc. etc confirming to fe 410-0 or Fe 310-0 including clamps complete all as specified and directed.

Mild steel screws, bolts (machine made) with hexagonal and square heads at one end and screwed at other, or screwed both ends each screwed end to be fitted with washer and one hexagonal and square nut n. exc. 5 Cm long dia of neck is 5 to 10mm complete all as specified and directed.

Mild steel round bars 10mm dia and over , cut to length fixed to Galvanised steel netting, securing with mild steel wire to keep the chain link fencing in straight shape complete all as specified and directed.

Chain link MS galvanised fencing any size or type complete all as specified and directed. (Make Tata or Equivalent)

Mild steel conforming to grade Fe-165 (Fe-290) angle post or struts in fencing fixed independently including cutting and bending to shape as directed drilling holes, notching for wire etc.complete all as specified and directed.

Angles for roof truss with purlin, rafter, struts and post and fixed with angle cleats or other connecting plates conforming to Gde Fe 410-0 or Fe-310-0 complete all as specified and directed.

Preparation of new steel surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide chrome primer complete all as specified and directed.

Mild steel round bars 10 mm dia and over cut to lenth, bent to shape required, including cranking,bending, spirally for hooping for columns, hooking ends fixed on PCC floor of Fe-and binding waith and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

All as per srl item No. 74 above but 5 mm dia and over including 10mm dia in stirrups, spaces and binders etc complete all as specified and directed.

M&L for mild steel TMT bars 6 mm to 8 mm dia cut to length bent to shape required including cranking bending spirally for hooping ends and binding with and incl mild steel wire ( annealed ) not less than 0.90 mm dia or securing with clips complete all as specified and directed.

Hard drawn steel wire fabrics cut to length bent to shape required and tying with and including mild steel wire (annealed) not less than 0.90 mm dia, weight n.exc. 4 Kg per Sqm complete all as specified and directed.

6 mm thick non asbestos fibre cement building designer boards or tiles fixed in ceiling of size 600mm x 600mm panel confirming to IS 14862 , incl aodised aluminium snap grid frame work with size of grid 605 mm x 605mm for seanless ceiling comprises of aluminium perimeter l section members, incl fixing with 4mm thich GI wire adjustable suspenders incl. all accessories complete all as specified and directed.

Preparation of new plastered or un- plastered surfaces and walls including cornices, pilasters etc and applying two Coats of cement base paint over a coat of primer complete all as specified and directed.

Applying one coat birla wall care putty on newly plastered wall surfaces including preparation of surface by brooming down or steel wire brushing, scrapping down vegetation growth, efflorscent salts and trading oil and greasy spot complete all as specified and directed.

Applying two coat of cement based paint of newly plastered surfaces complete all as specified and directed.

Aluminium powder coated frame suitable for sliding/openable/fix, partition, doors, windows, ventilator, guard bar, grill and similar work with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

Aluminium powder coated door shutters, aluminium section weighing 0.55 Kg/m including necesssary joining cleats, glazing clips, rubber neoprene packing handles 2 Nos in each door hinges, sliding bolt and tower bolts anodised aluminium snap beading screws etc complete all as specified and directed.

Aluminium powder coated windows/ventilator shutters, side hung type without sash bars, aluminium section weighing 0.55 Kg/m including necesssary joining cleats, glazing clips, rubber neoprene packing handles 2 Nos in each door hinges, sliding bolt and tower bolts anodised aluminium snap beading screws etc complete all as specified and directed.

Sheet glass quality 5 mm thick (tinted/one side view glass) in squares n. exc 0.5 sqm each pane and glazing incl all fitting complete all as specified and directed.

110 mm dia PVC (SWR) pipes single socketed in any length as in weepholes of retaining wall complete all as specified and directed.

Double action floor sprig hydraulic all regulated made up of min 1.25 mm thick aluminium steel foundation box, main body with s s covering pivot made of brass other parts made of mild steel heavy duty complete all as specified and directed.

Shingle filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled, and blinded with earth and rammed including watering complete all as specified and directed.

Framed work as in door or gates of angle or other section complete for drilled for sheet fixing to be prepared for hanging or slidingalso fastening and fixing etc. including all fittings complete all as specified and directed.

Mild steel plain black sheet covering to door chowkhets cut to size, edges holes punched screws rivete/welded as required complete all as specified and directed.

Powder coated aluminium anodised sliding windows shutters, aluminium section weighing 0.55 kg/m including necessary jointing cleat glazing clips, rubber packing, anodised aluminium snap beading screws etc. including all fittings complete all as specified and directed.

300 mm long aluminium alloy anodised sliding door bolt with hasp staple (bolt type ) and fixing clips of sheets ,cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed.

Butt hinges, 100 mm size extruded aluminium alloy with galvanised mild steel hinge pin, anodised complete all as specified and directed.

150mm long Aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

150 mm length Aluminium handles fabricated type anodised complete all as specified and directed.

100 mm length Aluminium handles fabricated type anodised complete all as specified and directed.

4 mm thick figured glass, pin head type and glazing complete in suares exc 0.50 sqm in each pane including glazing clis, rubber acking, powder coated aluminium snap beading, serews complete all as specified and directed.

Aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixedb with aluminium staples complete all as specified and directed.

Floor door stoper (140 mm length) of aluminium alloy body complete all as specified and directed.

Door closer hydraulically regulated, designation no 2 universal type suitable for door shutter of 701 to 850 mm in width and of weight between 36 to 60 kg Aluminium (extruded section) body complete all as specified and directed.

Aluminium mortice lock vertical type size 100 mm brass 4 lever etc complete all as specified and directed.

Brass mortice lock, vertical type, size 100 mm, 4 leaver complete all as specified and directed.

50 mm thick cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in plinth protection laid in alternate bays (n exc 2 sqm each) area with 6mm wide joints and 10mm wide joints between the walls and plinth protection, finished even and smooth without using extra cement, outward slope of not less than 1:12, the joints shall be filled with mastic filling comprising one coat of bitumen 85/25 grade and three parts of sand by weight, complete all as specified and directed.

Preparation of new plastered surfaces on walls and applying three coats of white wash complete all as specified and directed.

Preparation of new plastered surfaces on ceiling and applying three coats of white wash complete all as specified and directed.

Preparation of new plastered surfaces on walls and applying two coats of cement based paint complete all as specified and directed.

Preparation of newly plastered surfaces of walls applying two coats of oil bound distamper over one coat of chalk whitening of desired finish as approved by GE.

Mild steel window (Box type) factory made with side hung shutters incl pintol hinges, steel handles, steel peg stay and all locking arrangement complete with glazing bars dovetailed or welded incl one shop coat of red oxide primer complete all as specified and directed. Note : (i) The window shall be fabricated as per Drg CEUZ/TD/1269/2008 Sh 1/3 (ii) Glazing, wire gauge shall be measured and paid separately.

Mild steel ventilators (Box type) factory made with top hung shutters and bottom fixed type shutters incl pintol hinges, steel handles, steel peg stay and all locking arrangement complete with glazing bars dovetailed or welded incl one shop coat of red oxide primer complete all as specified and directed. Note : (i) The window shall be fabricated as per Drg CEUZ/TD/1269/2008 Sh 1/3 (ii) Glazing, wire gauge shall be measured and paid separately.

Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 quality A incl one shop coat of zinc chromate primer paint incl preparation of surfaces at contractor's workshop before fabrication complete all as specified and directed.

S&F 4 mm thick glass sheet of ordinary quality n exc 0.5 Sqm in each pane complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube and fixed in opening as per specification and drawing complete all as specified and directed.

S&F Factory made solid panel PVC Moulded door shutter 28 to 30mm thick stiles with 2,4 or 6 raised panel design with 2mm thick Moulded PVC sheet on the front face and 2mm thick plain coloure PVC sheet on back face complete all as specified and directed specification and drawing.

S&F aluminum handles cast type, anodised, 150 mm size complete all as specified and directed.

S&F mild steel cold rolled butt hinges medium weight 100 mm long complete all as specified and directed.

M&L for pressed steel frames size 105 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc comlete as specified supplied and fixed complete all as specified and directed.

S&F 35mm thick plain framed II nd class hard wood panelled factory made shutters (two panel) with lock rail and panel of 9mm thick BWP commercial ply with size of rail and stiles as per IS 1003 (part-1) kin seasoned and chemically pressure treated complete all as specified and directed.

S&F Aluminum alloy powder coated sliding door bolt 300 mm long and not less than 12mm dia with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

M&L for Two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces of any description over 10cm width or girth including preparation of surfaces complete all as specified and directed.

S&F for steel water tubing of nominal bore dia 15 mm medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings( such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) complete all as specified and directed.

S&F for steel water tubing of nominal bore dia 20 mm medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings( such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) complete all as specified and directed.

S&F for 20mm dia, Ball brass, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

S&F 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F for 500 ltrs capacity rotational moulded polythylene water storage tank (Cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed in SSR Part I.

S&F 10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.

S&F for PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F for Angle valve, cast copper alloy fancy type screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15 mm bore complete all as specified and directed.

S&F, 15 mm dia bib tap fancy type chomium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed.

S&F Vitreous China wash basin (Pedestal), white, flat back, size 550 mm x 400 mm excluding tap, chain, plug and porcelain stopper but including brackets and cutting for and pinning in ends of brackets complete all as specified and directed.

S&F Pillar taps 15mm bore fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' and cold with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and directed.

S&F for brass chromium plated tubular towel rail, 20mm dia, D type, 60 cm long between flanges complete all as specified and directed.

S&F for chromium plated soap dish and fixed with CP brass screws in wooden /plastic cleat complete all as specified and directed.

100 mm dia cast iron sanitary connection pipe upto 300 mm length complete all as specified and directed.

S&F cast iron soil, waste and vent pipes (sand cast) 100mm bore in any length with or without ears with cement joints laid in trenches or in floor complete all as specified and directed.

S&F cast iron soil, waste and vent pipes (sand cast) 75mm bore in any length with or without ears with cement joints fixed to wall complete all as specified and directed.

S&F Cast iron bend (any radius) diminishing pieces or tapers 100mm bore fitted with oval access door complete all as specified and directed.

S&F Cast iron bend (any radius) diminishing pieces or tapers 75mm bore fitted with oval access door complete all as specified and directed.

S&F 75mm bore Cast iron cowls complete all as specified and directed.

M&L cast iron floor trap 75 mm, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

S&F Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe), bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed.

S&F Vitreous china urinal partition white of size 310 x 700 mm about 40 cm above floor line complete all as specified and directed.

S&F stainless steel wall mounted cloth hanger with 6 peg set complete all as specified and directed and as approved by GE.

Stack clamps made out of 75mm by 5mm flat iron and 16mm dia round iron stays, incl bolts and nuts and securing ends of stays to wall or roof for 75mm bore complete all as specified

Salt glazed stone water drain pipe 200 mm bore in trenches and jointed as spfd complete all as specified and directed.

SFRC manhole covoer size 600 mm x 600 mm dia x 70 mm thick with frame, sides protested by angle iron, set in cement mortar 1:4 complete all as specified and directed. Note (i) Make SFRC manhole/drain cover and frame : (a) M/S PC concrete. (b) M/S K K Manhole (c) Or equivalent as approved by GE (ii) Contractor will provide manufacturer test certificate of SFRC cover & frame

Taking down carefully, copper/ aluminum point wiring (light, fan, socket or power/ LED Light fittings) complete fitting such as switch, sockets, ceiling rose, pendants socket any type, rectangular board terminal boxes etc and making good disturbed surfaces of walls floors and ceiling complete all as directed.Keeping the LED lights in safe custody.

Point wiring for one light/ fan/bell point controlled by one switch using 1.5 Sq mm FRLS copper conductor cables (multistanded) PVC insulated and unseathed in and including PVC concealed conduit (thickness not less than 1.5mm and 20mm dia), medium grade with Modular metal flush boxes & metal back plate for mounting in adequate module of switches, sockets & regulators etc with front plate modular type including supplying and laying PVC insulated unsheathed 1100 volts coppper conductor cable 1.5Sq mm as earth wire stranded and conected to earth dolly as specified. Make: Havells/ Finolex/ Polycab/ Gloster.

All as per Srl item No 148 but for 3 pin 5 Amps socket outlet independent including copper PVC insulated PVC unsheathed 1.5 sq mm earth wire and connected to earth dolly.

All as per srl item No 148 but for 3 pin 6 Amps socket outlet independent including copper PVC insulated PVC unsheathed 1.5 sq mm earth wire and connected to earth dolly.

All as per srl item No 148 but for 3 pin 5 Amps socket outlet on the same board including copper PVC insulated PVC unsheathed 1.5 sq mm earth wire and connected to earth dolly.

All as per Srl item No 148 but for 3 Pin 16 Amps socket outlet independent with cable 2.5 Sq mm including copper PVC insulated PVC unsheathed 1.5 sq mm earth wire standard and connected to earth dolly.

All as per Srl item No 148 but for 3 Pin 15 Amps socket outlet independent with cable 2.5 Sq mm including copper PVC insulated PVC unsheathed 1.5 Sq mm earth wire and connected to earth dolly.

S&F Exhaust Fan Ventil Air - DS 300mm Metallic Range Make: Havells or equivalent to Bajaj/ Philips/ Crompton complete all as specified and directed by Engineer-in-Charge.

S&F for New E-Lite LED Curve, high lumen batten with efficacy of 100 lumens in 20 W Make- Havells Cat pt No LHEXBXPNIN1W020 or equivalent to Crompton/ Syska complete all as specified and directed by Engineer-in-Charge.

S&F in replacement of New E-Lite LED Curve, high lumen batten with efficacy of 100 lumens in 10 W Make- Havells Cat pt No LHEXBXPNIN1W010 or equivalent to Crompton/ Syska complete all as specified and directed by Engineer-in-Charge.

S&F in replacement of LED bulk head luminaire, 10 W (ENDURA RUGBY) 230 Volts wall/surface mounted complete with with LED lamp 10 watt, with all accessories, pre-wired, including providing flexible copper wire, twin core cable Cat Part No. LHEOAOP7UZ6W010 Make: Havells or equivalent to Crompton/ Syska complete all as specified and directed by Engineer-in-Charge.

S&F for modular switch 6 Amps single pole one way 230 volt , with outer strip complete all as specified and directed by Engr In charge.Make:- Havells/ Legrand/ Indo Asian.

S&F for modular switch 16 Amps single pole one way 230 volts 50 Hz with outer strip complete all as specified and directed by Engr In charge. Make:- Havells/ Legrand/ Indo Asian.

S&F for modular socket 3 Pin 6 Amps flush type 230 volt,50 Hz with outer cover/inner cover complete all as specified and directed by Engr In charge. Make:- Havells/ Legrand/ Indo Asian.

S&F for modular socket combined 2-in-1, 6 Pin 6 & 16 Amps flush type 230 volt,50 Hz with outer cover/inner cover complete all as specified and directed by Engr In charge. Make:- Havells/ Legrand/ Indo Asian.

S & F Ceiling rose, surface bakelite 65x 50mm two to three terminals fixed on PVC Round Blockcomplete all as specified and directed by Engr In charge. Make:- Havells/ Legrand/ Indo Asian.

S & F in replacement sheet metal enclosures for DBs when MCBs to be used double door DB SPN 8 way 240 volts with 200 amps rated bus bar and neutral link in cluding chases wall for dixing DB and making good distributed wall surfaces to match with existing specification. Equivalent HPL/ Legrand/ Anchor complete all as specified and directed.

S & F in replacement MCB single pole 230 volt any rating from 10 to 40 amps 'C' series, with rupturing capacity 10 KA ,inculding providing thimble for out going cable Make:-- Havells/ legrand/ Schneider.

S & F in replacement MCB single pole and neutral 230 volt any rating from 63 Amps 'C' series, with rupturing capacity 10 KA ,inculding providing thimble for out going cable Make:-- Havells/ legrand/ Schneider.

S&F in replacement New decorative ultra slim square profile LED lighting fixture with polycorbonate ,environmental friendly energy efficient 20 W complete all as specified and directed by Engineer-in-Charge.Make- Havells/ Syska/ Philips

S&F in replacement Trim plus LED panel round shaped recess mounted panel in light weight 12 Watt complete all as specified and directed by Engineer-in-Charge.Make- Havells/ Syska/ Philips

S&F in replacement of Decorative, wall mounting, brushed nickel finish fixture with opal glass diffuser suitable with 9 W lamp B22 base 230 Volts wall/surface mounted complete with with LED lamp 9 watt, with all accessories, pre-wired, including providing flexible copper wire, twin core cable complete all as specified and directed by Engineer-in- charge. Make:- Havells cat LHFOAJE1TZ1I060 or equivalent to Crompton/ Syska

S&F Wall Mounted Fan 400mm sweep five star rated 230 volt,50 Hz complete all as specified and directed by Engineer-in-Charge.Make:- Havells or equivalent to Philips/ Crompton

S&F in replacement Sub main wiring with two single core PVC insulated with copper conductor cable stranded of size 10 Sqmm in PVC concealed conduit 25mm dia including PVC insulated copper conductor cable 6 Sq mm as earth lead all as specified. Including taking down old sub main wire. Make:- Gloster/ Finolex/ Polycab

Fan regulator electronic, stepped type hum free suitable control speed of fan from 0 to 100% and connecting electrically complete all as specified and directed.

Supply and Fixing Ceiling Fan 1200 mm sweep ES50 White energy saving 5 star rating. Make : Havells or equavalent to Bajaj/Philips/Cromption complete all as specified and as directed by Engr-in-Charge

Supply and Fixing 34 W (2x2) LED ceiling light flat panel for ceiling mounting which provides soft-light and glare free symmetrical illumination. Make Each : Havells, Cat pt No PLUTOSURFACE2X2PLS34WLED857S or quavalant to HPL/Philips/Wipro

SINGH CONST CO

VISHWANATH AND SONS

khajuria builders

vmd traders

RAMAN KUMAR

RAMAN CONSTRUCTION CO

SODHI TRADING CORPORATION

AKBAR FURNITURE HOUSE AND TIMBER MERCHANT