Procurement of valves, joints, clamps etc. as required for water supply department.

Amount

Providing and supplying D.I. fittings with ISI mark Mechanical joint confirming to tables 12 to table 31 of IS 95232000 upto latest amendments including cost of SBR EDPM gaskets, Nuts, Bolts, Washers and Ductile iron follower glands. Fittings should be with internally Ordinary portland cement mortor lined and externally metallic zinc coatingzinc rich paint with finishing layer of black bitumen coating including transportation and excluding all statutary duties and taxes such as GST levied by Gol and GoM in all respect etc. complete.

MJ Collar/Coupling (GP joint) - 80mm

MJ Collar/Coupling (GP joint) - 100mm

MJ Collar/Coupling (GP joint) - 150mm

MJ Collar/Coupling (GP joint) - 200mm

MJ Collar/Coupling (GP joint) - 400mm

Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete As per MJP DSR 2019-20 SECTION - I : PIPES APPURTENANCES page no. 126

Sluice valves - PN -1 without byepass arrangement - 80 mm

Sluice valves - PN -1 without byepass arrangement - 100 mm

Sluice valves - PN -1 without byepass arrangement - 150 mm

Sluice valves - PN -1 without byepass arrangement - 200 mm

Sluice valves - PN -1 without byepass arrangement - 250 mm

Providing and supplying I.S.I. mark rubber gasket suitable for C.I. or D. I. pipe of all class for tyton joints including inspection charges, transportation upto departmental stores excluding GST levied by GOI & GOM in all respect etc. complete.

Sealing ‘O’ Rings of SBR (for CID Joints)

Supply of C. I. Mechanical Compression Flanged / Socket Tailpiece(Popularly known as I TM Flanged / Socket Tailpiece) suitable for making flanged connection with the plain barrel of C. I. Spun Pipes ( as per - IS - 1536 /2001) and D. I. Pipes ( as per IS: 8329 / 2000).The Tailpiec to be supplied complete with sealing rubber gasket of S.B.R, C.I. Follower Glands and M.S. Nut Bolts.The whole assembly should be mechanically and hydraulically tested to the provisions as laid down in IS:1538 /1993. The rates are inclusive of cost of material, freight charges, loading, transportation and unloading at departemental store, excluding GST levied by Gol andGoM in all respect, etc. complete as directed.

Providing and supplying C.I. detachable joints suitable for A. C. pressure pipes manufactured as per IS-1538-1993 standards of following calass and diameter including cost of insurance, railway freight, inspection charges, unloding from railway wagon, loding into truck, transporting to departmental store, unloading, stacking and cost of rubber rings, nut bolts. excluding GST levied by GOI & GOM in all respect etc. complete (IS-1538-1993) Sr 13 page 65

Class 20

Nut bolts kg Page 10

Providing and supplying Air Valves as per IS- 14845-2000 and MJP’s standard specifications double orifice type combined with isolating sluice valve, mounted in horizontal position and operated by wheel gearing, small orifice elastic ball resting on a gun metal orifice nipple, large orifice vulcanite ball seating on moulded seat ring, inlet face and drilled, including insurance, third party inspection charges, loading, unloading, transportation upto departmental store, excluding GST levied by GOI & GOM in all respect etc. complete.

b) Double Ball Flanged Type - PN -1.6

Supply of CI Mechanical joint All Socket Tees as dimensionally described in Table -18 of IS - 13382/1992 complete with sealing rubber gasket of S.B.R. (dimensionally described in IS- 12820/1989) with cast iron follower gland and mild steel nut bolts coated or otherwise protected from rusting and suitable for C. I. pipes.

100x100x80 mm dia

100x100x100 mm dia

150x150x80 mm dia

150x150x100 mm dia

200x200x100 mm dia

200x200x150 mm dia

250x250x150 mm dia

250x250x250 mm dia

Suction pipes 3 inch

Suction pipes 4 inch

Foot Valve 4 inch

Foot Valve 3 inch

Demolition hammer Machine ( Breaker )- 1200 Watt

Angle grinder machine - 1000 Watt

Drill Machine Tool set 500 Watt

MS clamp for 400 mm cemet pipeline ( As per measurement)

Rajesh Construction

Mayuresh Motiram Jadhav