Renovation of Irrigation Guest House (Minister Residence) at A.G. More, Doranda, Ranchi

Amount

Providing and applying plaster of paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete. E/I.

Providing and applying white cement based putty of average thickness 1mm of approved brand and manufacturer,over the plastered wall suface to prrepare the surface even and smooth complete.job as per direction of E/I.

Providing two coats of plastic emulsion paint of approved shade and make over a coat of cement primer over new surface including preparing plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty wherever required, scaffolding washing of floor and taxes all complete as per building specification and direction of E/I.

Providing two coats of plastic emulsion paint of approved shade and make over old surface including washing cleaning and preparing the walls scaffolding washing of floor and taxes all complete as per building specification and direction of E/I.

Finishing walls with Acrylic Smooth exterior paint of required shade New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20kg/ 10 sqm)

Finishing wall with premium acrylic smooth exterior paint with silicone additives of required shade of: old work (two or more coats applied @ 1.67ltr/10sqmm over and including base coat of water proofing cement paint applied @ 2.20kg/10sqm)

Providing &Applying high quality acrylic modified resin based texture of Dholpur/Red sand stone patter with anti algae and Uv resistace properties to be aapplied as intermediate fiish in desired pattern @ 43.04 kg/s10 sqm to form film of 1-1.15mm thickess after scrapping and propperly cleanig the surace to remove loose particles from the plaster surface,followed by top coating with premium acrylic smooth exterior paint with silicoe additives of required shade by two or more cots @ 1.43 litre/10sqm,complete as the direction of E/I.

Dismantling old plaster and pointing in cement or lime and raking out joints to 15mm depth, watering and disposal of unserviceable materials with all leads all complete as per direction of E/I.

Providing 6mm cement plaster (1:4) in celling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Dismantlingtile work in floors and roofs laid in cement mortar including stacking material with in 50 metres lead for thickness of tiles 10mm to 25mm including all complete job as per direction of E/I.

Providing and laying 6mm precast white glazed tiles in walls over 12mm cement mortar (1:3) and jointed with grey cement slurry flush pointing with white cement including rubbing, polishing and cost of curring taxes and royalty all complete as per building specification and direction and E/I.

With "A" grade white Tiles.

Providing and fixing 10 mm thick acid and/or alkali resistant tiles in dado/Skirting.o fapproved make and colour using acid and/or alkali resisting mortar bedding, and joints filled with acid and/or alkali resisting cement as perIS : 4457, complete as per the direction of Engineer-in- Charge.(in flooring on a bed of 10mm thick mortar 1:4(1 acid proof cement:4 coarse sand)(Acid and alkali resistant tile)(in flooring)

Providing and laying Ceramic glazed floor tiles of size 300x300 mm(thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar1:4 (1 Cement : 4 Coarse sand),jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigments etc., complete

S/F/F VIP Bath room fitting including all complete job as per direction of E/I.

Soap dish

Towel Ring

Bib cock (Long tahread)

Angular stop cock

Mirror of 6mm thick 600x450mm

pillar cock (Long neck)

Supplying, fitting and fixing viterous white glazed earthen ware I.W.C. of Parry Hindustan or any other I.S.S. approved make with 100 mm H.C.I., "p" trap 15 litres C.I.. or C. pull and let go flushing cistern of names or other I.S.S. equivalent make, complete with all fittings, C.I. or C.C. brackets 32 mm alkathene/P.V.C. telescopic flush, pipe about 2 M long with one brass coupling and clamps G.I. chain and pull including supplying and fixing a pair of viterous white glazed earthenware where footrest to be fixed in floor 15 mm C.I. body brass spindle stop cock of weight not less than 50 grms. 15 mm P.V.C. connection pipe 450 mm long and the exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/l.

(a) 510mm longwith 10.0 lit. low level P.V.C. cistern

Supplying, fitting and fixing viterous white glazed earthen ware wash hand basin of Parry or Hindustan or any other I.S.S. approved make supported on pointed c.l. or R.S. brackets 32m C.I. brass waste 15mm dia C.I. body brass spindle stop cock of approved quality of weight not less than 350grms., 32mm P.V.C. waste pipe 750mm long with brass coupling at one end and making plumber joints etc. all complete as per specification and direction of E/l.

Providing and fixing Chlorinated polyvinyl chloride (CPVC)pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i.e. fixing the pipe with clamps at 1.m.spacing.This included jointing of the pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of E/I. concealed work including cutting chases and making good the walls etc.(Internal work)(Concealeld work)

15mm nominal outer dia pipes

Providing and fixing Chlorinated polyvinyl chloride (CPVC)pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i.e. fixing the pipe with clamps at 1.m.spacing.This included jointing of the pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of E/I. concealed work including cutting chases and making good the walls etc.(Internal work)(Exposed on wall)

20mm nominal outer dia pipes

25mm nominal outer dia pipes

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion(i)single socketed pipes.

75mm dia

110mm diameter

Providing and fixing on wall face unplasticised PVC moulded fittings, accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring confirming to I:5382 leaving 10mm gap for thermal expansion.

shoe(plain)

110mm dia

Single Tee with door

Clips-110mm dia

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing apes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer’s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with12.5 mm thick tapered edge gypsum moisture resistant board

Providing and fixing factory made Upvc glazed /wire mesh windows/vdors comprising of lead free uPVC multi-chambered fame and mulion(where eve required)extruded profiles having minimum wall thickness of 1.70mm for series R1 and R2 profiles and 2.10mm for series R3 and R4 profiles conforming to EN 12608 in any shape,colour and design duly reinforced with galvanized mild steel section made of required shape &size as prCPWD specification,UPVC extruded glazing beads,interlocks and inline sash adaptor ( where ever required) of appropriate dimensionEPDM gasket,hardware,SS 304 grade fasteners of miniumi 8mm dia with countersunk head,comprising of matching kpolyamide PA6 grade sleeve for fixing frameto finished wall asper IS 1367:part 1 to 14,plastic packers,plastic caps and necessary stainless steel screws etc Profile of frame,sash &mulion ( if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all comers,including drilling of holes for fixing hardware and drainage of water etc.After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality all compelte as per approved drawig conforming to CPWD specification and direction of E/I

Three track thre panels sliding window with two glazed & one wire mesh panels with aluminium channel for roller track,wool pile,nylon rollers with SS 304 body using R2 series withframe (70mm & above)(40mm&above)& both glazed and fly scen sash(25mm&above)x(50mm & above) with zinc ally (zamak) powder coated touch locks with hook(height upto 1.2metre)

Providing and fixing alumiunum work for door ,windows ,ventilators and partitions with extruded built up standard tubular sections, appropriate z sections and other sections of approved make conforming to IS:733 and IS:1285,fixed with dash fasteners of required dia and size including necessary filling up the gaps at junctions,i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc.Aluminium sections shall be smooth, rust free, straight ,mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling C.P. brass/stainless steel screws .all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing and paneling to be paid for separately) Anodised aluminium (anodised transparent or dyed to requireid shade according to IS:1868,Minimum anodic coating of grade AC 15)

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Anodised aluminium (anodised transparent or dyed to requireid shade according to IS:1868,Minimum anodic coating of grade AC 15)

Providing and fixing glazing in aluminium door, windows ,ventilator shutters and partitions etc with EPDM rubber/neoprene gasket etc complete as per the architectural drawings and the directions of E/I.(cost of aluminium snap beading shall be paid in basic item) with float glass panes of 5.0mm thickness(weight not less than 12.50kg/sqm)

Providing and fixing fly proof wire gauze to windows,clearstory windows& doors with M.S.flat 15x3mm and nuts & bolts complete Galvansied M.S.wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides including all complete job.as per direction of E/I.

Supplying of 4mm thick ACP approved quality including all complete job as per direction of E/I.

waterproofing for old land new roof slab providing and laying water proofing treatment on roof slab by applying two component factory designed ready to use acrylic modified flexible materials applied with brush,roller or spray for water proofing coating as per manufacturer specification with foollwing items.

a)surface prepaation-providing and cleaning of concrete surface to remove dust oil grease including removal of existing loose paint/coating and cement laitance by cleaning with compressed air & water jet including all materials,labour,tools complete ponding test to be done after plugging all outlets and to be checked from soffit to indentity seepaage,leakage.On indentification of seepage,cement grouting to be done with non shrink expanding admixture of sika India Pvt.Ltd/MYK schomberg/Dr.Fixit/Fosroc or equivalent.Providing and reparing of all conners and joints such as those between the parapet wall and the roof slab etc.shall be chamfered with 150mmx150mm fillet of mortar cement sand a:4) admixed with acrylic polymer of sika/Foscroc/MYK schemberg/Dr.Fixit or equivalent.Before chanfering surface irregularities,damaged concretein base slab,dead cracks if any,with anyt acrylic polymer modified repair mortar including a coat of bonding agent of the same with lkcement shutty including all materials,labour tools commplete.

(b)Ist coat-Applying Ist coat of two compnent acrylic modified ready to use flexible component mataerials on surface salurated dry roof and side wall of parapet wall upto 600mm by brush or roller after Ist coat of application 45 grm of Fibre glass cloth to lay when the first layersis-do- will be maseured.

(C) 2nd coat to apply the 2nd coat of two compounent anylic modified ready useFlexible cementitious materials right angle to the Ist coat over the glass fibre laid surface,2nd kcoat should be applied @ 0.7kg/sqmt/coat .For the purpose of measurement the entire treated surface will be measured.After kthree days of drying the 2 nd coat,The rain water outlets to be plugged and ponding ktest to be done for 48 hours to indentity seepage,leakage from soffit and if found necessary rectification to be deon as per ksatisfaction of E/C.The waterproof coating to be protected from damgae before screed over it.Water proofing coating to be protected from damgae before screen over it.Water proofing Brand sika Topseal 109hi/Fosroc Brushbod RFX/Dr fixit pidifin 2K/MYK Auafin TG.Product performance chemical,Base part A,Acrylic copolymer,PartB-speciaally graded cementtitios powder Density 1.6 kg/1(,oxed demsotu)at

(d)Protection of treapled surface with PCC-The treated surfaace should be covred with 25mm to 50mm PCC of M20 grade(1:1.5:3) with proper slope(1:120) towards the rain outlet in of 2mtx2mt keeping 6mm gap between the paned joint intergal water proofing admixture conforming to IS 2645 @ of 100ml per bag of cement to be added in the acreed concrete (paid outlet and concerte surface should be packed properly with rich concree and kthe kperipheral mouth to be sealed with moisture insentive epoxy putty of sika India pvvt.Ltd/MYK.schemberg/Dr.Fixit/Fosroc.For the pupose of measurment kthe enite treated surface will be measured;

(e) Grgove of PCC surface should be filled with polysulphide seallant(paid separately)Brand-sika India Pvt Ltd/MYK schomberg/Dr.Fixit/Fosroc warantly for five years.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

Supplying fitting and fixing M.S.Grill made of 20x6mm M.S.flat as per approved design and drawing properly fabricated with joints continous fillet welded and finished smooth carriage of grill to work site,hoisting as per building specification and direction of E/I(where materials to not supplied by the deptt)

Supplying, fitting and fixing 20 guage G.C.I. Sheet gate fitted on M.S. Angle frame of size 60X60X6mm. Including cost of fabrication, providing necessary locking arrangement with haskal and domny duly fixed in P.C.C. (1:2:4) blocks of required size applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/I.

Providing two coat of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface throughly , scaffolding and taxes all after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I.

Providing and fixing stanless steel(Grade 304) railing made of Hollow tubes,channells,plates etcincluding welding,grinding,buffing,polishing and making curvature( wherever required) and fitting the same with necessary stainless steel nuts and bolts complete,I/C fixing the railing with necessary accessories & stainless steel dash fasteners,stainless steel bolts etc,of required sizie,onthe top of the floor or the side of waist slab with suitable arrangment as per approval of Engineer-incharge,(for payment purpose only weight of stainless steel members shall be considered excluding fixing accessoreis such as nuts,bolts,fastners etc)

Taking down old door and window shutters including stacking serviceable materials within 15M,. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.

Supplying, fitting and fixing 35mm thick solid core type non-decorative single leaf flush door shutter in door and windows with black board core blended with high quality phenol formal dehydes synthetic resine both side commercial veneered of standard make with oxidised iron fittings such as hinges, towerbolts, handle, cleat and sand blocks and taxes all complete as per building specification and direction of E/I.

Providing and fixing plain lining with necessary screws,nuts & bolts,nails,including a coat of approved primer on one face,and fixed on wooden/steel frame work,complete as per direction of E/I.12mm thick commercial ply conforming to IS:1328 BWR type including all complete job.as per direction of E/I.

Providing and fixing 6mm commercial ply thick as per drawing for plain lining/cladding with necessary screws,including priming coat on unexposed surface all complete job.

Providing and fixing decoravtive high pressue laminated sheet of plain/wood grain in glose/matt,suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS:2046 Type S,including cost of adhesive of approved quality including all complete job as per direction of E/I.1.5mm thick

Supply of Fevicol/ktcat/vamicol approved quality including all complete job as per direction of E/I.

Steel work in built up tubular ( round, square or rectangular hollow tubesetc.) trusses etc., including cutting, hoisting, fixing in position andapplying a priming coat of approved steel primer, including welding andbolted with special shaped washers etc. completeHot finished welded type tubes

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.

Providing 250mm. Wide brick drain in cement mortar (1:6) with av. 150mm clear depth and 250mm apron including cost of eartwork involved with 75mm cement concrete (1:4:3) over one brick designation 75A flat soling in proper grade and slope at the base the drain duly plastered in C.M. (1:3) with punning over exposed surface all complete as per building specification and direction of E/I.

Dismantling pucca brick or lime work including stacking serviceable materials in countable stacks within 15M. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.

Supplying of Anglle iron lpost & strut of required size including bottom to be split and bent at right kangle in lopposite direction for 10cm length and drilling holes uupto 10mm dia etc complete (Y shape post with angle 65x65x6)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size)

Providing and fixing concertina coil fencing with required dia 600mmdia 10metre openable length(total length 90m)(having 50nos,round per 6 metre length) up to 3 m height of wall with existing angle irn ‘Y’ shaped palced 2.4m or 3.00m apart and with 9 horizontal R.B.T.stud tied with G.I.staples and G.I.clips t retain horizontal including necessary bolts or G.I.barbed wire tied to angle iron all complete as per direction of Enginner-in-charge withreinforcedd barbed tape(R.B.T)/spring core(2.5mm thick) wir f high tensile strength of 165kg/sqmm with tape (0.52mm thick) and weight 43.478gm/metre (cost of M.S.angle,C.C.blocks shall be paid separately)

Providing primer one coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning, removing dust, dirt, scales smokes and grease and cleaning the surface throughly including cost of scaffolding and taxes all complete as per building specification and direction of E/I. (Mode of measurement area shall be multiplied by the co-efficient as indicated in building specification)

Providing two coat of painting with ready mixed paint of approved shade and make over steel surface including cleaning the surface throughly , scaffolding and taxes all after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I.

Carriage of materials from nearest approved sources of supply including loading into trucks and unloading from trucks and stacking properly at work site as directed by the E/I.

sand lead 8K.M.

chips lead 22K.M.

Brick lead 8K.M(1K+7P)

Stone Metal 20 km lead

Supply of unbranded special Transparent Polycarbonatae sheet length 2400millimeter product id: 5116877-49484248482 including all complete job.(length:2400mm,Thickness:10mm,width:1200mm)

supplying and fixing wall paper of decorative approved design as per direction of E/I. inclouding cost of wall paper,adhesive,labour and scaffolding all complete as per direction of E/I.

Supplying and fixing of HINDWARE Box Rim Type European pattern Toilet seat,Product id:5116877-34229376786 including all compelte job.

Supplying and fixing of Hindware push Button Type Flushing cistern Single Flush system 10ltr Product id: 5116877-24101813257 including all complete job

Supplying and fixing of Health Faucet including all complete job.

Supplying and fixing Jaquar vitreous china sinks/wash Basins Flat Back and square LYS WHT 38931) product id:5116877-71859610321 including all complete job.

Supplying and fixing of Jaquare 15mm Brass Basin Mixer (Extruded,Rolled,cast die cast) Bib Trap product id 5116877-56219462576 including all complete job.

Supplying and fixing of Jaquare 15mm leaded Tin,Brass Bib Tap(wall mixer 3 in 1 FUS-29281)product id 5116877-74760076795 including all complete job.

Supplying and fixing of Jaquare 20mm Bib Tap (Extruded,Rolled,cast die cast) product id 5116877-97991782423 including all complete job.

Supplying and fixing of Hindware 8mm Brass (Extruded,Rolled,cast die cast) Stop valve (Externally threaded) product id 5116877-51647937837 including all complete job.

Supplying of coronet 600 15PVC Transpared pipe mm connection pipe with nuts.product id 5116877-42645055626 including all complete job.

Supplying of Fidelis Healthcare stainles steel liquid soap dispenser of capacity 400ml(soap Dispenser SS)product id 5116877-34683236574including all complete job.

Supplying of PRIMA Towel Rail stainless steel PRIMA(CP TOWEL RACK 699MM PIL 4504H)product id 5116877-58034482094including all complete job.

Supplying of jaquar Towel Ring stainless steel(SS 202)(TOWEL RING SQUARAE (AKP 35721P)product id 5116877-4692558141including all complete job.

Supplying of PRAYAG 15 mm Bib Tap conforming to IS 8931:latest (Prayag cat no 9306 N(Bib cock with flange) Product it :5116877-25079535475including all complete job.

Supplying of PRAYAG Hanging system Rectangular Mirror (Prayag cat noBLM 01 LOOKING MIRROR 600X450MM) Product it :5116877-25268804340including all complete job.

Supplying of jaquar Bathroom concealed showers Cast Brass Grade LCB-2 of IS:292/1983)product id 5116877-92394641774including all complete job.

Supplying of PRAYAG Soap Dish-case stainless steel PRAYAG(CAT NOGBA 151(soapo Dish)Product it :5116877-67098044641including all complete job.

Supplying fitting and fixing of Roller/Roman Blind curtain of approved brand and shade including all complete job as per direction of E/I.

Add 18 % GST (in Basic Rate must fill 12)

Add 1% Labour Cess (in Basic Rate must fill 1)

ARUN KUMAR (BID ID -675271)