Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹41.4 LAccepted-AOC | L1 | Accepted-AOC Reasonable rate | |
| 2 | L2₹44.9 L+₹1.1 L (2.63%)Rejected-Finance | L2 | Rejected-Finance Quoted amount higher than L1 | |
| 3 | L3₹45.0 L+₹1.3 L (2.97%)Rejected-Finance | L3 | Rejected-Finance Quoted amount higher than L1 | |
| 4 | L4₹45.8 L+₹2.1 L (4.84%)Rejected-Finance | L4 | Rejected-Finance Quoted amount higher than L1 | |
| 5 | L5₹46.9 L+₹3.2 L (7.30%)Rejected-Finance | L5 | Rejected-Finance Quoted amount higher than L1 |
Tender Value
₹42.7 L
EMD Value
₹85,460
Closing Date
8 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
COL N K CHAUDHARY
HQ 137 WKS ENGR PIN 914137 CO 99 APO
SPL REPAIR TO BLDG NO P 30 QTR NO OR 2 1 TO 8 OR MD ACCN IN ZONE E AT MIL STN AGARTALA
2022_MES_538612_1
8628/E8
Open Tender
Civil Works
Item Rate
180 days
AGARTALA
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
AGE I AGARTALA
₹85,460
13 Oct 2022
16 Jul 2022
16 Aug 2022
16 Jul 2022
8 Aug 2022
1 Aug 2022
Amount
Dismantling floor, hearth or wall tiling including cement mortar bedding, (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.
Dismantling of AC / CGI sheet corrugated / Semi corrugated sheets in wall cladding or in roof covering complete all as specified and directed.
Dismantling wall /ceiling board(fibre pulp insulation) or insulation boards any thickness including cover fillets complete all as specified and directed.
Dismantling timber boarding of any description fixed in any position complete all as specified and directed.
Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.
Demolition of PCC/ Lime concrete from sunken floor (ground or 1st floor) and removing and depositing materials exc 150 mtrs but n exc 250 mtrs away complete all as specified and directed..
Demolition and breaking up 100 mm dia internal dia bore drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and directed.
Material & Labour Salt-Glazed stoneware drain pipes internal dia100mm laid in trenches and jointed complete all as specified and directed.
Roughening surfaces of old concrete floor by picking, sweeping clean & washing down with water to remove dust etc and brushing neat cement slurry at the rate of 3 kg of cement per sqm complete all as specified and directed.
Supply and fix in repair 100mm bore CI Nahani trap with grating incl all joints & making good to floor & tested complete, jointed to waste pipe tested complete all as specified and directed.
Supply and fix in repair 75 mm bore CI Nahani trap with grating incl all joints & making good to floor & tested complete, jointed to waste pipe tested complete all as specified and directed.
Taking up or down 15mm bore steel water tubing & connections complete all as specified and as directed..
All as per item No. 13 above but 20 mm bore -ditto-
Taking down cement plaster of any description built in cement mortar on brick/concrete surfaces including racking out joints hacking for key, scrubbing down with, water etccomplete all as specified and as directed.
Taking down chowkat with shutter/without taking off shutter from the frame n.exc 1.50 Sqm each complete all as specified and as directed.
Taking down chowkat with shutter/without taking off shutter from the frame exc 1.50 Sqm but n.exc 4.00 Sqm each complete all as specified and as directed.
Hacking out old broken glass ( any thickness, sizes, quality or description) from wooden frames or glazed with putty or fixed with beads complete all as specified and as directed.
Excavation in post holes each n exc 0.5 cum getting out returning filling in and removing earth or broken rubble mixed with earth around in layers not exc 25 cm watering and removing surplus soil to a distance not exc 50 m and making good surface as in soft/loose soil complete all as specified and as directed.
Supply & fixing Fe-410-W(Gde-E-250) quality-B rolled mild steel section in joist, channel, angle or tee sections, fixed independently,without connecting plates, etc.(cut to ordinary lengths i.e., within 20 mm of the length indicated)complete all as specified and as directed.
Material and labour for PCC (1:3:6) type C2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed.
Supply and fixing well-seasoned 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.
Supply & fixing 35mm thick Factory made Flush shutter solid core construction with block board core and plywood face panels commercial type on both sides complete all as specified and as directed.
Supply and fixing 35mm thick 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) complete all as specified and as directed.
Supply & fixing Factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm wood grain printed PVC sheet used instead of plain colour PVC sheet & edges will be painted to match with printed sheet and reinforced with MS square tube complete all as specified and as directed.
Supply and fixing factory made solid PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement supplying and fixing in the frame at site as per specification and drawing complete all as specified and as directed.
Materials and labour mild steel work such as hold fasts, hooks, clamps etc and similar work conforming to Fe 290. Gde-165 complete all as specified and as directed.
Supply & fixing100mm size type B-21. Butt hinges, extruded aluminum alloy with galvanized MS hinge pin anodized complete all as specified and as directed.
Supply & fixing 125 mm size Butt hinges, heavy weight, cold rolled mild steel complete all as specified and as directed.
Supply & fixing 150mm size extruded aluminium alloy handles, fabricated type anodized.complete all as specified and as directed.
Supply & fixing 200mm long aluminium anodized barrel tower bolts of extruded section.complete all as specified and as directed.
Supply & fixing Mild steel sliding door bolts of size 300mm length of bolt, plate type, stove enamelled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate & two on staple plate. complete all as specified and as directed.
Supply & fixing Steel ventilator with top hung shutter including hinges, steel peg stay complete all as specified and as directed.
Supply and fixing mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors, ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.
Supply & fixing steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay, glazing bars, dovetailed or welded for recieving glass complete all as specified and as directed.
All as per item No. 35 above but without glazing bars
Material and labour for cutting holes in brick work , built in cement mortar depth of cutting not exc half brick and making good the surfaces in PCC (1:2:4) type B1 (using 20 mm graded stone aggregate) after fixing of hold fasts/ lugs and like etc complete all as specified and as directed.
Supply & fixing 4 mm thick sheet glass ordinary quality & glazing with oil putty in squares n exc 0.5 sqm in each pane complete all as specified and as directed.
Supply & fixing 4 mm thick sheet glass frosted ordinary quality & glazing with oil putty in squares n. exc 0.5 sqm in each pane. complete all as specified and as directed.
Supply and fix stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm & fixed with tinned tacks or galvanised wire staples complete all as specified and as directed.
Supply & fixing in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm & fixed with tinned tacks or galvanised wire staples complete all as specified and as directed.
Supply & fixing Mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed..
Material and labour for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.
Material and labour for preparation of old steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamal paint complete all as specified and as directed.
Material and labour for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.
Materials and labour for preparation of new plastered or unplastered ceiling surfaces and applying three coats of white wash exc 10 cm width or girth complete all as specified and directed.
Materials and labour for preparation of old plastered ceiling surfaces and applying one coat of white wash complete all as specified and directed.
Materials and labour complete removal of internal wall finishes by scrapping down and preparation of plastered or unplastered surfaces by applying min 1mm wall care putty and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.
Materials and labour Preparation of new plastered surfaces by applying 2mm wall care putty and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.
Materials and labour preparation of old plastered surface of walls and applying two coats of acrylic exterior weather resistant paint over a coat of alkali resistant primer including removal of existing treatment complete all as specified and directed.
Materials and labour preparation of New plastered surface of walls and applying two coats of acrylic exterior weather resistant paint over a coat of alkali resistant primer complete all as specified and directed.
Material and labour for complete removal of internal ceiling finishes by scrapping down and applying three coats of whitewash complete all as specified and as directed.
Material and labour for non skid ceramic coloured tiles (Premium Quality) 7 to 8mm thick (Square/ rectangular) area of each tile exc 0.06 sqm but n.exc 0.11 sqm in floor etc set and jointed in neat cement slurry and pointed in white cement with pigment to match the shade of tiles over and including 15mm thick screed bed in CM (1:4) complete all as specified and as directed.
Material & Labour for non skid ceramic coloured tiles 7 to 8mm thick (square /rectangular) area of each tile exceeding 0.11sqm but not exc 0.18 sqm in floors etc. set & jointed in neat cement slurry & pointed in white cement with pigment to match the shade of tiles over and including 15mm thick screed bed in CM (1:4) complte all as specified.
.-Ditto- all as per item No 54.00 above but in skirting and dado laid over and including 10mm thick rendering in cement mortar (1:4) and -ditto-.
Material and labour for glazed ceramic coloured tiles (Premium Quality) of size 350x250x7mm thick as on vertical surfaces, set and jointed in neat cement slurry and pointed in white cement with pigment to match the shade of tiles laid over and including 10mm thick cement plaster in CM (1:4) complete all as specified and as directed.
Material and labour for pre-polished machine pressed chequred tiles 25cm x 25cm x 20-22mm thick, in floor, set jointed and pointed in grey cement with pigment to match the shade of tiles over and including 15mm thick screed bed in CM (1:4) complete all as specified and as directed.
Material and labour for 25mm thick of min size 550 X 550mm size machine cut kota stone slab flooring over and including 20mm thick screed bed in cement mortar (1:4) with roughening of surface, laid and jointed with grey cement slurry @ 4kg/sqm mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.
Material and labour for 20 mm thick machine cut kota stone slab on verticle surface as skirting/dado over and including 10mm thick cement plaster in cement mortar (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.
Materials and labour for 10 mm thick rendering in cm (1:6) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed .
Materials and labour for 5 mm thick rendering on cement concrete surfaces as in ceiling in cement mortar (1:4) and finished the surfaces even and smooth without using extra cement complete all as specified and directed.
Taking down complete existing roof treatement from roof surface and roughening surfaces of old concrete floor by picking, sweeping, cleaning and washing down with water to remove dust and brushing with neat cement slurry with 3 kg cement per sqm complete all as specified and as directed.
Materials and labour 15mm thick rendering in cm (1:4) on concrete/brick surfaces with integral water proofing compound @ 3% by wt of cement, all as specified and as directed. Note :- (Water proofing compound measured & paid separately)
Materials and labour for making the grooves to 'V' section in existing parapet walls/columns over RCC roofs cleaning out and tacked the polymeric membrane into yhe grooves and sealed solidly with a hot mixture of bitumen and clean dry sand in the ratio of 1:1 by weight etc all as specified and as directed.
Materials and labour for clearing of plastered roof surface & applying one coat of cold bitumenous primer @ 0.25 lits per sqm conforming to IS 3384-1986, and applying a layers of APP based polymeric membrane, 3mm thick (minimum) weight 3.50 Kg/sqm reinforced with polyster non woven fabric (weighing not less than 160 gms/sqm) shall be applied over Bitumenious primer (Application of polymerie memberane shall be by torch application, over laps shall be minimum 100mm on the transverse direction & 75 mm on the longtudinal direction) coved fillet in PCC (1:2:4) type BO of radius 75 mm shall be provided at the junction of roof& other vertical surfaces & surfaces shall be painted with hot paving bitumen of penetration value 30/40 conforming to IS 73 @ 1.20 kg/sqm over a coat of bitumenous primer @ 0.30 ltrs per sqm & applying one coat of aluminium paint over the APP nmodified membrane @ 0.11 kg/sqm all as specified and directed.
Supply only integral water proofing compound
Supply & fixing in repair stainless steel plate rack of size 31'' x 36'' x 10'' complate all as specified and directed.
Supply & fixing in repairs gun metal gate valve 20mm dia with iron wheel head screwed both ends for iron pipe complete all as specified and directed.
Supply and fixing as in repair for vitreous china squatting pan of ‘Orissa pattern’, size 580 mm x 440mm (white) with ‘P’ or ‘S’ trap, front or back inlet and foot rests, any pattern complete including provision of PCC bedding and connection to trap, flushing pipe, anti syphonage pipe, etc. including making good the disturbed floor complete all as specified and as directed.
Supply and fixing as in repair 10 litre capacity low level PVC flushing cistern white, syphonic action type, with inlet, ball valve, float, handle, fixed with cast iron bracket (of suitable size) and providing 32 mm dia PVC flush pipe and making all necessary connections complete all as specified and as directed.
Supply and fixing as in repair vitreoues china WHB with padestal, white, flat back, of size 450X300mm including CP brackets, CP waste coupling 32 mm bore including 15mm bore PVC connection pipe 450mm long with PTMT nuts at both ends complete all as specified and as directed..
Supply & fixing in repair brass chromium plated tubular towel rail, 20 mm dia, D type, 60cm long between flanges complete all as specified andas directed.
Supply & fixing in repair pillar taps 15mm dia bore fency type with capstain heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and as directed.
Supply & fixing in repair 15mm bore brass chromium plated mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all specified and as directed.
Supply and fixing as in repair 125mm dia chromium plated shower rose with revolving joints fixed to 15mm bore GI Pipe complete all as specified and as directed.
Supply & fixing in repair 15 mm angular stop valves, cast copper alloy, screwed down, high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.
Supply & fixing for flexible PVC waste pipe for using wash basin/kitchen sik 32mm size length N.Exc 1.0Mtr fixed with waste coupling all as specified and directed.
Supply and fixing as in repair CP soap dish complete all as specified and as directed.(Prayag model No Cat no BA -05 or equivalent make.
Fixing only 15mm bore galvanised steel water tubing including all fittings and fixed complete to walls/ ceiling or laid in floors complete all as specified and as direcetd. (Note: Serviceable pipes obtained from taking down under Sch item No 13.00 here-in-above shall be reused under this item after cleaning for refixing)
Fixing only 20mm bore galvanised steel water tubing including all fittings and fixed complete to walls/ ceiling or laid in floors complete all as specified and as direcetd. (Note: Serviceable pipes obtained from taking down under Sch item No 14.00 here-in-above shall be reused under this item after cleaning for refixing )
Supply & fixing 20 mm bore medium grade galvanised steel water tubing with all fitting & fixed complete to walls or ceiling or laid in floors complete all as specified and as directed.
All as per item No 82 above but 15 mm bore -ditto-
Supply & fixing PVC connector 15mm size with PTMT nuts of length 600mm complete all as specified and as directed.
Supply & fixing in repairs 15mm bore fancy type chromium plated bib taps with crutch of butterfly handle screwed down for iron pipes, complete all as specified and as directed.
Supply & fixing in repairs 15mm bore stop valve fancy type,chromium plated , screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions. complete all as specified and as directed.
Supply and fix in repairs sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, wqashers and wastes, incl bedding in cement mortar to dwarf wall or incl fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410mm x 330 mm x 160 mm and waste fittings 40mm dia, brass, chromium plasted for glazed ware sinks basins etc with long screwed shanks and fly-nuts, flange end bedded in red lead cement and otehr end fixed but exclusive of fixing of supply and waste pipe complete all as specified and directed.
Material and labour II nd class hardwood plain fillets square, rectangular or triangular in sectional area exc 13 Sqcm & n. exc 25 Sqcm clean swan secured with nails complete all as specified and as directed.
Material and labour II nd class hardwood plain fillets square, rectangular or triangular in sectional area exc 6 Sqcm & n. exc 13 Sqcm clean swan secured with nails complete all as specified and as directed.
Supply & Fix 18/19 mm thick exterior grade prelaminated particle board (prelaminated on one side) with decorative choice lamination and other side balancing white lamination fixed with screws to timber frame work/shutters complete all as specified and as directed.
Extra over rates of block board or veneered particle board for external teak wood lipping, 6mm thick fixed with nails complete all as specified and as directed.
Supply & Fix in repair 20mm dia mild steel chromium plated curtain rod fixing with brackets, stop, rollers complete all as specified and as directed.
Supply & Fix aluminium handles, cast type anodised 100 mm complete all as specified and as directed.
Supply & Fix 40mm dia copboard knobs fixed with nut, screw and washer of brass polished complete all as specified and as directed.
Supply & fixing 100 mm size Butt hinges medium weight cold rolled mild steel complete all as specified and as directed.
Supply & Fix 100 mm aluminium anodised Hasp and staple, safety type,including bolt to hinge plate fixed with screws complete all as specified and as directed.
Supply & fixing continious (Piano) hinges, mild steel, bright finish or electro galvanised of 30mm width (when open) complete all as specified and as directed.
Supply & fixing1000 ltrs capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted & fixed in position including providing necessary connection all as specified and directed including taking down of old tank complete.
Supply & fixing in repair 25 mm bore ball brass valve high pressure with polyethelene float & fly nut compelete screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.
Materials and labour for mass concrete filling using PCC ( 1:5:10) type E2 cusing 40mm graded stone aggregate as in filling of sunken floor complete all as specified and as directed.
M & L 20mm thick cement plaster in CM 1:4 mixed with water proofing compound @ 3% and applying water profing treatment on sunken portion with acrylic based polymer modifed cementitious composite compound as specified and approved & cement slurry in two layers, 1st layer @ 0.488 Kg/ Sqm mixed with composite compound @ 0.253 Kg/Sqm, & the second layer slurry @0.242 Kg/Sqm mixed 0.126 Kg of compound complete with min 4 hours allowed to air cure between these layers and applying 200 µ polyflim with adhesive complete all as specified and as directed. Note:-WPC will be measured and paid Separately
Supply and fix in repair 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring loints, fixed to walls or laid in floor complete all as specified and as directed.
Supply and fix in repair 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring loints, fixed to walls or laid in floor complete all as specified and as directed.
Supply and fix in repair 75 mm bore PVC (SWR) bends in any types complete all as specified and as directed.
Supply and fix in repair 110 mm bore PVC (SWR) bends in any types.complete all as specified and as directed.
Supply and fix in repair 75 mm bore PVC (SWR) branch piece, single (Single Y) equal or unequal complete all as specified and as directed.
Supply and fix in repair 110 mm bore PVC (SWR) branch piece, single (Single Y) equal or unequal complete all as specified and as directed.
Supply and fix in repair110 mm bore PVC (SWR) vent cowl complete all as specified and as directed.
Supply & fixing in repair low density (LDPE) polyethylene pipe of pressure rating 6 Kg/Sq cm bore of tube 32 mm complete all as specified and as directed.
Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws as per manufactures instruction complete all as specified and as directed.
Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws as per manufactures instruction complete all as specified and as directed.
Material and labour for 4mm thick Asbestos cement plain building boards fixed to timber framework with screws complete all as specified and as directed.
Supply & fixing 2nd class Hard wood 20 mm thick boarding planed both side with butt joints fixed with nails in any situation complete all as specified and as directed.
M&L for providing 100 mm thick cement concrete type C-2, 1:3:6 using (40 mm graded brick aggregate) as in path or paveway finished rough without using extra cement even and to recieve the topping layer complete all as specified and directed.
Materials and labour 25mm thick P.C.C (1:2:4) type B-0 using 12.50 mm graded stone aggregate as in sub floor finished even and rough to recieve the topping layer complete all as specified ans as directed. .
Material and labour for 75mm thick PCC (1:3:6) type C2 (using 40mm graded stone aggregate) as in plinth protection, paving, footpath etc and finished the surface even and smooth without using extra cement complete all as specified and as directed.
Demolition of brick work or stone/boulder masonry, built in cement mortar including all quions, arches, pillers etc complete all as specified and as directed.
Materials and labour Brick work with sub class B bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.
Materials and labour Brick work with sub class B bricks straight or curved on plan to any radius in half brick thick walls, built in cm 1:4 complete all as specified and directed.
Material and labour PCC 1:3:6 type C2 using 40 mm graded aggregate as in surface channel/drain complete all as specified and directed.
Material and labour Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms, moulds mitred stopped end etc complete all as specified and as directed.
.-Ditto- all as per item No 121.00 above but add or deduct for each 25mm girth or part there off over or under 30cm and -ditto-.
Material & Labour for writing letters or figures (block, Roman, Italic or Indian) n.exc.30 cm high complete all as specified and directed.
Taking down carefully existing copper/Aluminum point wiring (light,socket or power) complete including fittings such as switches, ceiling roses, pendents, sockets, boxes, light fitting etc and removing from site and making good disturbed surfaces of walls, floors etc complete all as specified and as directed.
Material and labour for point wiring (surface type) for one light/fan/call bell point with 1.5 sqmm PVC insulated (FR-LSH) unsheathed copper cable multistranded conductor 1100 volts grade controlled by one way switch including 1.5 sqmm PVC (FR-LSH) insulated unsheathed copper cable multistrand conductor 1100 volts grade for continuity earth wire connected to common earth dolly drawn through and including PVC casing caping of suitable size with all accessories and PVC rectangular boxes for mounting switch, socket and fan regulator etc complete all as specified and as directed. Note: (i) Wiring shall be done in proper colour coding using red , yellow, blue for phase, black for neutral and green for earth. (ii) The cost of making good the disturbed surfaces is deemed to be included in the quoted rate.
.-Ditto- all as per item No 125.00 here-in-before but for 3 pin 6 amps socket outlet on the independant board .
.-Ditto- all as per item No 125.00 here-in-before but for 3 pin 6 amps socket outlet on the same board.
.-Ditto- all as per item No 125.00 here-in-before but for one 3 pin 16 Amps socket outlet on independent board with 2.5 sqmm PVC (FR-LSH) insulated un-sheathed copper conductor cable multistranded conductor 1100 volts grade and 2.5 Sqmm PVC (FR-LSH) copper conductor cable as earth continuity conductor.
Supply & fixing switch piano flush type (ISI marked), single pole, one way 5 Amp, 240 Volts complete all as specified & directed.
Supply & fixing switch piano flush type (ISI marked), single pole, one way 16 Amps, 240 Volts complete all as specified & directed.
Supply and fixing socket outlet 2 in 1, 3 pin, 6 Amp 240 volts piano complete all as specified & directed.
Supply and fixing socket outlet, 2 in 1, 3 pin 16/15 Amp,240 volts complete all as specified & directed.
Supply and fixing fan regulator 100/120 watt step rotary socket type AC 220 volts complete all as specified and as directed.
Supply and fixing ceiling rose, PVC/polycarbonate, isolated body surface bakelite, 65mm x 50mm, ISI marked three terminals complete all as specified & directed.
S&F energy saving high power LED building security light of 25W made up of pressure die cast aluminium housing with embedded PC cover having TOP opening seperate driver compartment with IP66 protection including GI pipe bracket made out of 40mm dia light grade pipe of length 1.2 Mtrs, bend to shape 120-130 degree and MS clamps made out of 25x3mm flat iron 2 Nos including nut and bolts for fixing the bracket and making connections in flexible conduit all as directed. Make : Cat No ENDURAPEARLSL25WLED757SASYTOPC Endura pearl of Havells or equivalent make as mention in list of approved make in PS.
Supply & fixing environment friendly, energy saving, surface mounted, decorative bulk head edge lit LED luminaire 10W or min 800 lumens with IP 65 with suitable fixing arrangement complete with all accessories internally prewired and including connectingup with and including twin core twisted flexible copper conductor cable of suitable size in flexible conduit all as specified and as directed. Make : Cat No RUGBYNEONFT10WLED860SSYMTOPC of Havells or equivalent make as mention in list of approved make in PS.
Supply & fixing, IP >= 20, Class I, LED light fitting 1 x 20 W (4 FT), CRI >= 80, CT >= 5700 K, wall / surface mounted, integrated type with all accessories internally prewired and including connecting up with and including twin/three core twisted flexible copper conductor cable of suitable size in & incl flexible hose from ceiling rose to fitting complete all as specified and as directed. Make : Cat No ENDURALINEARNEOBS20WLED840SPCWH of Havells or equivalent make as mention in list of approved make in PS.
Supply & fixing, IP >= 10, Class I, LED light fitting 1 x 10 W (2 FT), CRI >= 80, CT >= 5700 K, wall / surface mounted, integrated type with all accessories internally prewired and including connecting up with and including twin/three core twisted flexible copper conductor cable of suitable size in & incl flexible hose from ceiling rose to fitting complete all as specified and as directed. Make : Cat No ENDURALINEARNEOBS10WLED840SPCWH of Havells or equivalent make as mention in list of approved make in PS.
Supply and fixing bell push piano type one way 5/6 Amp,240 volt single pole complete all as specified & directed.
Supply and fix call bell ding dong AC 240 volt,single pole 50HZ complete all as specified & directed.
Supply and fixing MCB, single pole 'B' series having braking capacity 10 KA, 6 to 32 Amp, 240 volts, complete all as specified & directed.
Supply & Fixing MCB SPN having braking capacity 10 KA, 40 Amp, 240 Volt 'B' Curve complete all as specified and directed.
Supply & Fixing MCB TPN having braking capacity 10 KA, 63 Amp, 240 Volt 'C' Curve complete all as specified and directed.
Supply and fixing sheet metal enclosure for 8 way DBs double door type 240volts, 200 Amps rated bus bar ,IP-43,IK -09 with metal door including necessary connection all as specified and as directed.
Supply and fixing as in replacement MCB DB Vertical TPN 4 way (double door) incommer including bus bar retural link, earth bar and din rail, recessed will wall surfaces by chase cutting and making good surfaces of wall complete all as specified and as directed by the Engr-in-Charge. Make : Havells cat part No DHDLVDRWGOFO04 or equivalent make as mention in list of approved make in PS.
Materials and labour for sub main wiring with two single core, FRLS, multi stranded, PVC insulated, 1100 Volt grade, cable with copper conductor of size 4 Sqmm in and drawing through existing surface / recessed steel/ PVC conduit including continuous PVC insulated copper conductor single core earth contunuity conductor of size 4 Sqmm connected common earth complete all as specified and as directed. Note : (i) 3 Runs of 4 Sqmm cable and one run of conduit shall be measured as one unit length. (ii) The cost of making good the disturbed surfaces is deemed to be included in the quoted rate.
Labour only Hanging or Refixing of Ceiling Fan 5 star rated any size Including provision of suitable flexible cable as required complete all as specified and directed.
Labour only Hanging or Refixing of Electric storage water heater with capacity of 25 ltr, by 5 star rated any size Including provision of suitable flexible cable as required complete all as specified and directed.
Materials and labour for earthing complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly and preferably vertically in ground, earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 m below ground level connetced with galvanised wire of 4mm dia by means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead to be protected by galvanised iron pipe of 15mm bore (light grade) and other end connected to earthing test point or lightening arrestor or main controlling switch as directed including providing funnel with 20mm bore galvanised iron pipe (medium grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate), 50mm thick precast RCC (1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia) including necessary earth work in excavation, returning filling and removal of surplus earth upto a distance not exceeding 50 m etc all as shown on electrical plate No. 3 of MES Schedule Part-I(2009) complete including testing on completion including taking down old unserviciable earthing set all as specified and as directed. Notes:- (i) Main earthing strip from earth plate electrode to rest point upto length of 7.5 meters length shall deemed to be included in the unit rate quoted against this item. (ii) On testing after completion if the desired resistenance is not obtained the contractor shall redo the earthing without any extra cost to the department.
SHRI RAJESH DEY
M/S UTTAM GANGULY ENTERPRISE
M/s Amrit Gope
M/S SANKAR GOPE
M/S PAUL ENTERPRISE
M/S SWAPAN DEBNATH
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .