85776SPECIAL REPAIR TO BLDG NO. 20 (GYMNASIUM) AT ALC UNDER GE (SOUTH) PUNE

Amount

Dismentling floor, hearth or wall tiling incl cement mortar bedding but not backing removing servicable tiles to store and rubbish off the premises.

Demolition of cement concrete in ground foors and paving not exc. 15 cm thick complete all as specified and as directed.

M/L for cement concrete type B-1. 1:2:4 (20 mm graded stone aggregate) of 30 mm thick as in levelling course under ceramic tile flooring etc complete all as specified and as directed.

M&L hand cut kota stone slab flooring of size 600 mm X 600 mm and 20-25 mm thick over cement screed base laid and jointed with grey cement slury mixed with pigmen to match the shade of the slab including rubbing and polishing complete, including 20-25 mm thick screed bed in CM 1 : 6 complete all as specified and as directed.

All as per item No 04 here- in- above but in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slury mixed with pigmen to match the shade of the slab including rubbing and polishing complete, including 10 mm thick backing coat in CM 1:4 complete all as specified and as directed.

Dismentling of stone boulder/ concrete masonary work built in cement mortor incl precast concrete articles.

M&L PCC block masonry in 1:5:8, type E2 and built in CM 1:6 Complete all as specified and as directed.

Grinding of old kota stone/ cement tile flooring in floor including rubbing and polishing complete all as specified under Cl. No. 13.47.4 of SSR Pt-I & directed by Engr-in-Charge.

M&L for joint free non skid ceramic tile 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm and n exe 0.18 sqm in floor etc, set, jointed in cement slurry and pointed in white or coloured cement to match the shade of tiles laid over & including 15 mm thick screed bed in CM 1:6 etc complete as in flooring all as specified and directed.

All as per item No 09 here- in- above but in skirting /dado set, jointed in cement slurry and pointed in white or coloured cement to match the shade of tiles including 10 mm thick backing coat in CM 1:4 etc incl triangular filleting in cement mortar (1:4) on top of tiles complete all as specified and as directed.

M&L for PCC 1:3:6, type C2 of 75 mm thick as in plinth protection etc complete all as specified and as directed.

Taking down cement plaster including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L for rendering 15 mm thick cement mortar 1:4 on concrete surfaces using water proofing compound of 3% by weight of cement complete. (Note WPC shall be measured and paid separately)

Supply only integral water proofing compound ISI marked complete all as specified and as directed.

M&L for 10 mm thick plastering in CM 1:6 on fair faces of bricks or concrete surfaces finished even smooth with thin layer of finish with 3 mm thick wall care putty complete all as specified and as directed.

M&L for preparation new plastered surfaces of wall and applying two coats of cement base paint over a coat of primer complete all as specified and as directed.

M&L for preparation new palstered surface of wall and applying two coats of oil bound distember over a coat of primer complete all as spd and directed.

M&L for preparing old surface including scraping of wall and applying one coat of oil bound distember complete all as specified and as directed.

M&L for preparing old surfaces of wall and applying one coat of cement base paint complete all as specified and as directed.

Taking up or down carefully steel tubing and connection including cleaning for refixing or removal to store of size 15 mm bore pipe.

All as per item No 20 here- in- above but 20 mm dia bore pipe.

Refixing old steel tubing and connections in new or old postion (wall /floor /ceilings etc) of size (concealed) with new GI fittings complete all as specified and directed for 15 mm dia bore pipe .

All as per item No 22 here- in- above but 20 mm dia bore pipe .

S&F GI tubes "medium grade" galvanized with all fittings and fixed complete to walls and ceiling or laid in floors etc (concealed type) complete all as specified and directed for 15 mm dia bore pipe..

All as per item No 24 here- in- above but 20 mm dia bore pipe.

M&L for Stone, concrete block or slab ,Cutting chases, pinning in stone/ concrete block walls, making good to facings where required and pointing in CM 1:4 for consealed water tubing etc complete all as specified and as directed.

S&F rotational moulded polythylene water storage tanks of tripple layers (cylindrical vertical with colsed top) hoisted and fixed in postion incl tank nipple & necessary fitting all as specified and directed of 500 ltrs capacity, including dismantling of capacity exc 250 ltr and n. exc 500 ltr.

S&F ball brass valves high pressure with polythene float and fly nut of 15 mm complete screwed for iron pipe as specified and directed by the Engineer-in-Charge.

S&F in repairs fancy type pillars taps CP 15 mm dia , cast copper alloy with capstan heads cromium plated, screwed down high pressure with long screwed shanks of and flynuts complete, screwed for iron pipe complete all as specified and directed.

S&F in repairs shower rose fancy type bass chromium plated 125 mm dia heavy duty pattern with swivel joints type screwed for 15 mm bore including jointing to pipe or unions complete all as specified and as directed.

S&F in repairs bib tap fancy type of cast copper alloys with crutch or butter fly handle screwed down screwed for iron pipe or for brass fenule and fixed to 15 mm bore pipe complete all as specified and as directed.

S&F in repairs vitreous China squatting pan, `Orissa' pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) incl lime conrete bedding complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan, 'Pedestal' coloured, including fixing bolts etc including PVC seat cover white with flat bottom including MS, CP or aluminium anodised hinges devices etc complete all as specified and directed.

S&F for oval shaped coloured vitreous china WHB table top fancy type of overall size 595 x 380 mm, including 32 mm CP waste coupling, PVC waste pipe etc complete, including granite slab counter of black colour as approved and of size 1.20 m x 0.60 m includingrounding edges etc, complete, horizontally supported by 01 No of 35 mm thick cuddappa stone slab one side polished and vertically supported by 02 No 35 mm thick complete all as specified and directed by Engr-in-Charge.

S&F in repairs vitrous china wash hand basin white 550 mm x 400 mm flat back inclduing and providing CI brackets, wste pipe 40 mm dia medium grade, CP brass wast coupling 32 mm dia with check nut washer etc complete all as specified and directed by Engineer-in-Charge.

Vitreous China urinals, half stall type, complete including providing and fixing plus, bedding urinal against wall in cement mortar 1:2 securing urinal to plus with and including 60 mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets of capacity 5 Ltrs, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe).

M&L for 15 mm dia brass push tap of chromium plated high pressure screwed for iron pipe suitable for urinal complete all as specified and directed.

S&F in repairs urinal spreader of brass body chromium plated for fixing with 15 mm dia pipe suitable for urinal complete all as specified and as directed.

S&F in repairs 15 mm dia brass self closing angle cock prismatic for urinal with wall flanges and 200 mm connecting pipe complete all as specified and directed.

S&F stop cock cast copper fancy type with long shank and cup alloy with capstan heads screwed down high pressure of 20 mm dia (concealed type).

S&F PVC connection 15 mm size with PTMT nuts of length 450 mm.

S&F in repairs 10 litres capacity PVC flushing cistern high level including ball valve inlet & outlet connection 15 mm dia PVC pipe with check nuts on both ends, PVC waste pipe 32 mm upto WC connection and GI 15 mm dia overflow pipe upto floor level complete all as specified and as directed.

S&F in repair tubular towel rail brass chromium plated 20 mm dia 600 mm long fixed with brass screws complete all as specified and as directed.

S&F 32 mm dia PVC waste pipe for urinal, cistern & WHB fixed in position complete all as specified and as directed.

S&F steel grating 150 mm with central hole as reqd size complete all as specified and directed.

M/L for PVC (SWR) floor trap 100 mm including jointing with CM 1:4, 75 mm dia

Taking down chowkats or frames of wooden / steel exc 1.5 sqm & n.exc. 4 Sqm (without taking off shutters from the frames) & removing from site.

Taking down chowkats or frames of wooden / steel n exc 1.5 sqm (without taking off shutters from the frames) & removing from site.

Taking down shutter of wooden / steel exc 1 sqm & n.exc. 2 Sqm complete & removing from site.

S&F solid PVC door frame of size 50 mm x47 mm made out of 5 mm plain colour PVC sheet, reinforced with MS square tube, supplying and fixing in opening all as per specification and drawing.

S&F factory made solid panel PVC door shutter 30 mm thick (styles) consisting of frame made out of M.S tubes for top & bottom rails; M.S frame shall be covered with heat moulded plain colour PVC ‘C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and single side prelaminated PVC sheet 5 mm thick for top rail, lock rail and bottom rail and stile and rails having one side feathered edge, on other side 10 mm 900 bent edge, panelling to be fitted in MS frame welded/sealed to the stiles and rails and 15 mm thick PVC sheet beading inside and decorative PVC beading of 10 mm x 10 mm all as per specification and drawing indication in SSR Part-II 2010 complete all as specified and as directed.

S & F pressed steel frames for doors with one or more rebates incl necessary fixing lugs, hinges, lock strike plate etc complete as specified size of frame 105 x 60mm filled with PCC 1:3:6 type C-0 complete all as specified and as directed.

M&L for plain framed, panelled shutter 35 mm thick with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm thick veneered partical board with commercial veneering on both face.The size of rail and stile as per IS: 1003,kiln seasoned and chemically pressure treated complete as directed.

S & F butt hinges 100 mm size MS cold rolled medium weight all as specified.

S & F butt hinges 75 mm size MS cold rolled medium weight all as specified.

S&F aluminium anodised barrel tower bolts of extruded section 200 mm long.

S&F aluminium anodised barrel tower bolts of extruded section 150 mm long ISI mark.

S&F aluminium alloy sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section etc length of bolt 300 mm ISI mark.

S&F Extruded aluminium alloy handles, fabricated type., anodised 150 mm size ISI mark.

S&F Extruded aluminium alloy handles, fabricated type., anodised 100 mm size ISI mark.

S&F in repairs 300 mm MS ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and as Directed.

S&F floor door stopper, aluminium alloy body and tongue anodised with hard drawn steel spring of 140 mm size overall.

S&F in repairs aluminium powder coated decorative type curtain rod 20 mm dia complete all as specified and as directed.

S&F aluminium powder coated brackets suitable for 20 mm dia curtain rod (minimum projection from wall 75 mm) fixed in wall including drilling, rawl plug, screws etc complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of old wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed.

M&L for Preparation of new wooden surfaces exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer. complete all as specified and as directed.

M&L for Preparation of old steel surfaces exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

M/L for prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5 mm thick and 150 GSM of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws including dismantling of AC sheets corrugated or semi corrugated complete all as specified and as directed.

M&L for Plain, galvanised, mild steel sheeting, 1.00 mm thick in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 including dismantling of AC sheets corrugated or semi corrugated complete all as specified and as directed.

Dismantling wrought rion or mild steel iron of any description not otherwise provide for. complete all as specified and as directed.

S&F MS structural steel work, framed as in trusses, purlins, rafter, post grill,gaurd bar etc. conforming to grade E-250 (Fe-410W, quality A) including shaped washers and necessary cutting required length, notching drilling, riveting and or welding or connecting with nut bolts with angle cleats, fish plat, gusset plate and also erecting in true position complete as directed.

M&L for Gypsum ceiling board for ceiling prepainted, perforated finish, 595 x 595 x 9 to 10 mm thick in size, of approved brand/make, laid over and including grid work of size 600 mm x 600 mm, made out of 0.5mm thick G.I. tee 32 x 24 mm for main, 25x24mm for cross tee and 20 x 20mm angle fixed on wall, powder coated finish on exposed faces of tee and angle. hung from ceiling using 2 mm thick G.I. Suspension wires spaced at 1200 mm on main runners including making niches for fans/light including dismantling ceiling / boarding of any description, fixed in any position complete all as specified and as directed.

M&L for granite 20-22 mm thick (of any type) work (table rubbed and polished) in steps ,pillar, window cill,shelf and like in cement mortar (1:4) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.

Rounding to edges of stone slabs one edge, such as in steps,shelf cooking platform, and other similar situations complete all as specifed and directed.

S&F in repair for CP Health faucet fixed as directed.

S&F high density 40 mm bore polythylene pipes (HDPE) of pressure rating 6 kg/cm2 fixed complete to wall or in floors with necessary socket, elbow & bend etc complete fixed to wall or in floors etc all as complete and directed.

M&L for cement concrete in cills,steps,coping, kneeler, apex stone, water troughs or of other similar works slightly rounded or chamfred angles and throating of type B0 1:2:4 and using (12.5 mm stone agg) complete all as specified and as directed.

M&L for cement concrete in surface channels and drains avg 50 mm thick type B0 1:2:4 using 12.5 mm stone agg complete all as specified and as directed.

Removal of old building material/concrete beyond the lead included in the rates, including loading, unloading and stacking at the destination to a distance not exc. 5.00 km.

S & F glass ventilators lower type using 4 mm thick plain / tinted glass, and using aluminium powder coated sections and rubber beading etc complete all as specified and directed. (a) SP 20048 (b) Glazing Clips 19352

S&F aluminum partition with 12 mm thick prelaminated particle board of choice colour in bottom panel and 5mm thick frosted/design glass in top panel fixed with clips aluminium, beads, rubber gaskets etc., centre to centre distance of vertical member shall n.exc 1 m and horizontal member shall n.exc 1.10 m using following aluminum powder coated section as specified complete as directed (a) SP – 20048 (b) DP - 20047 (c) Glazing clips - 19352

S&F aluminum anodized three track sliding window with two shutters of 5 mm thick frosted glass with concealed lock, imported bearing good quality track and shutter PVC glazing clips and necessary fitting etc as specified as per manufacturer instructions with the following size and directed by Engineer-in-Charge.(a) Bottom rail . 20619 (b) Top & Vertical rail. 20681 (c) Handle. 20606 (d) Inter lock 20724 (e) Top & bottom & sides 20844

M&L for point wiring with 1.5 sqmm PVC insulated (R/Y/B for phase and black for neutral) unsheathed multi stranded copper conductor ,1100 volts grade ,FRLS cable in and including PVC casing / caping not less than 2 mm thick with all accessories and 1.5 sqmm green in colour PVC insulated standed copper conductor cable for earth continuity connected to common earth dolly including pressed steel terminal box/PVC box surface /flush type with 3 mm thick pre laminated hylem/PVC sheet for mounting fitting such as switches ,sockets , fan regulators etc complete all as secified and directed by Engineer in charge for one light/fan/bell point controlled by one switch.

All as per item No 84 here- in- above but for 3 pin 5 Amps socket outlet point on same board.

All as per item No 84 here- in- above but for 3 pin 5 Amps socket outlet point on the independent board.

Taking down the existing ceiling fan of any size , and deposited to MES E/M store for safe custody complete all as directed by Engineer in Charge.

M&L for cleaning ,overhauling ,lubricating ,spray painting ,with one coat of synthetic enamel paint ,wiring MES No, after overhauling and refixing the fan complete all as specified and as directed.

S&F ceiling fan regulator Electronic step type suitable for fan 1200 mm sweep fans complete all as specified and as directed..

M&L for point wiring with 2.5 sqmm PVC insulated (R/Y/B for phase and black for neutral) unsheathed multi stranded copper conductor ,1100 volts grade ,FRLS cable in and including PVC casing / caping not less than 2 mm thick with all accessories and 2.5 sqmm green in colour PVC insulated standed copper conductor cable for earth continuity connected to common earth dolly including pressed steel terminal box/PVC box surface /flush type with 3 mm thick pre laminated hylem /PVC sheet for mounting fitting such as switches ,sockets , fan regulators etc complete all as secified and directed by Engineer in charge for one 15 amp socket controlled by one switch in and incl PVC casing caping complete..

All as per item No 90 here- in- above but 2.5 sqmm for 15 amps socket outlet point on the same board.

S&F Piano type switch 5 amps single pole.

S&F ceiling rose surface type 65 x 50 mm three terminals.

S&F switch Piano type 15 Amps SP one way all as specified.

S&F socket outlet 2 in 1 (multipurpose) 3 pin 5 and 15 Amps flush type all as specfied.

S&F socket outlet 5 Amps 3/5 pin 230 volts flush type.

S&F lamp holder (Angle /bracket) insulated body with back plate for batten fitting.

S&F box type LED light fitting,1 x 20 watt , 230 V,C surface mounting white powder coated CRCA sheet steel housing with a perforated metalic frame complete with 20 W LED tube complete with all accessories prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed.

S&F in replacement of LED energy efficient street light fitting 25 Watt LED pressure die cast aluminium housing in heat resistant glass covered with IP-66 protection and including GI pipe as required length and size with fixing accessories complete complete all as specified and as directed.

S&F in replacement of sleek LED mirror light fitting 10 Watt complete in all respect having high output diffuser complete all as specified and as directed.

M&L for sub main wiring complete with two single core 4 sqmm ,1100 volts grade , PVC insulated ,standed copper conductor cable with continuous copper earth conductor of 1 x 4 sqmm in PVC casing caping of suitable size not less than 20 mm including taking down old U/s worn out sub main wiring complete all as specified and as directed.

S&F vertical 4 way TPN double door ,recess mounted/wall mounted , MCCBs as incomer is 3 pole V-tec of 63A rating & 16KA breaking capacity ,MCCB is pre-fitted at factory & including price of MCCB complete all as specified and as directed.

S&F MCB DB ,SPN 8 way , double door ,with 200 amp rated busbar 240 V.

S&F in repair MCB SPN 10-40A , 10 KA , C series,Amps 230 Volts, complete all as specified and as directed.

S&F in repair MCB SP 6-32A , 10 KA , C series , Amps 230 Volts,complete all as specified and as directed.

M&L for plate earthing for sub station equipments (transformer ,lighting ,arrestor and feeder pillar box ) complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6.3 mm thick, buried directly in ground vertically (in earth pit not less than 2.25 metres below normal ground level) with the top edge of the earth plate at a depth not less than 1.5 m below normal ground level), the earth electrode surrounding by adequate quantity of charcoal dust and salt to a packed thickness of 15 cm on all sides and incl GI wire of 4 mm dia bolted (with GI nuts , bolts & check nuts) and riveted to earth plate electrode at one end and connected t o metalic bodies of HT/LT equipments etc at the other ,earth strip encased in and including 20mm bore GI medium grade pipe with all fittings from top of electrode to body of equipment fixed with and including clamps , bolts nuts and washer and also including providing watering pipe 20 mm bore GI pipe medium grade from bottom of earth pit to top of electrode complete with earth in PCC 1:2:4 type B0 using 12 mm graded crushed stone aggregate ,RCC cover , funnel,wire mesh including necessary excavation and earth work ,etc complete all as specified and shown in electrical plate No 3 of SSR Pt-I NOTE:- (1) Refilling of earth Pit shall be caried out with black cotton soil. (2) GI wire of 4 mm dia & GI protection pipe up to 7.5 m length will be measured under this item.

M&L for fixing earth continuty or main earth lead fixed to wall or buried in ground or drawn in GI pipe with 4 mm GI wire.

Taking down carefully point wiring any type and size for light /fan /5 /15 amps plug point and switch socket etc and making good the disturbed surfaces.

Taking down carefully by unscrewing from the boards,outlets boxes/ceiling/walls the fitting and fixture such as switches,sockets,ceiling rose,lamp holder etc of any type /size and capacity.

Taking down Main switch /DBs of any make and type including teakwood board etc complete and making good the disturbed surfaces including colour wash.

M&L for sub main wiring complete with four single core 4 x 6 sqmm, 1100 volts grade, FRLS, PVC insulated standered copper conductor cable with continuous copper earth conductor of 6 sqmm in PVC casing caping of suitable size not less than 32 mm complete all as specified and directed by Engineer-in-Charge.

S&F in replacement of LED 36 Watt racess mounting 2x2 luminaire of 36 watt , white powder coated CRCA housing with highpower LEDs. Aluminium front frame with flat white high transmission acrylic cover prewired and all accessories complete all as specified and as directed.

Taking down carefully by unscrewing from the ceiling/ walls the fittings etc of any type/size and capacity.

S G Engineers

TULSAYA CONSTRUCTION

M/S Abhishek Builders

Suma Construction

Parhar Enterprise

Agarwal Agencies