Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | FIRST₹43.9 LAccepted-AOC 26 3 3RD CROSS GANESHA BLOCK SULTANPALYA RT NAGAR POST BANGALORE 560 032 | BANGALORE | BANGALORE | KARNATAKA | 560032 | FIRST | Accepted-AOC BEING LOWEST | |
| 2 | SECOND₹45.7 LRejected-Finance | SECOND | Rejected-Finance BEING NOT LOWEST | |
| 3 | THIRD₹48.4 LRejected-Finance 10 AISHWARYA 1ST FLOOR 2ND CROSS ANNAYAPPA GARDEN NEW THIPPASANDRA HAL HAL III STAGE BANGALORE 560075 | BENGALURU URBAN | KARNATAKA | 560075 | THIRD | Rejected-Finance BEING NOT LOWEST |
Tender Value
₹46 L
EMD Value
₹92,000
Closing Date
5 Jan 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF MARATHAHALLI
GE AF MARATHAHALLI WIND TUNNEL ROAD, KEMPAPURA, YEMALUR POST, BANGALORE. PIN- 560037
ADDN ALTN TO MES INSTALLATION AT AKASH VIHAR AND VISHWA VIHAR CAMP AND CERTAIN OTHER SANCTIONED WORKS UNDER GE AF MARATHAHALLI
2023_MES_630983_1
8661/E8
Open Tender
Civil Works
Works
180 days
GE AF MARATHAHALLI
AS PER ENIT
7 documents required · 7 mandatory
₹500
GE AF MARATHAHALLI
₹92,000
Yes
7 Feb 2024
4 Dec 2023
10 Jan 2024
4 Dec 2023
5 Jan 2024
18 Dec 2023
Amount
M & L for Surface excavation n.exc. 30 cm deep and averaging 15cm deep and getting out in soft loose soil.
M & L Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out hard/dense soil all as specified and as directed.
M & L Excavating over areas n.exc 1.5m deep and getting out in soft/loose soil all as specified and as directed.
M&L for Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm each complete all as specified and directed.
M & L for Removing excavated material and depositing outside MoD land, abiding all local regulations and all as specified by Engr-in-Charge.
Demolition of brickwork or stone/boulder masonry, built in cement mortar, complete all as specified and directed.
M & L for pre cast cement concrete block masonry with solid block exc 10 cm thick in width (with plain or interlocking joints as directed) complete, in walls and set in cement mortar 1:6 of PCC 1:3:6 (Type C1) all as specified and as directed.
M & L for concrete 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) in foundation, filling and mass concrete all as specified and directed.
M & L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface with broken bricks all as specified.
M & L for 100 mm thick cement concrete 1:4:8 type D-2, (using 40 mm graded crushed stone aggregate) as in sub floor all as specified and as directed.
M & L for 100 mm thick cement concrete type B1, 1:2:4 (using 20 mm graded crushed stone aggregate) as in flooring, finished even and smooth without using extra cement, all as specified and as directed.
M&L for 75 mm thick PCC 1:3:6 type C-2, using 40 mm graded crushed stone aggregate as in plinth protection finished even and smooth withou using extra cement. Note: Joints of the plinth protection should be filled with sand and bitumen mortar and sealed with bitumen grading and contractors quoted rates are deemed to include this element
Material & Labour for PCC 1:2:4 type B-1(using 20 mm graded crushed stone aggregate) as in surface channels/benching of manhole, drain, laid to shape and slope and surfaces complete etc all as specified and directed.
M & L for sand filling pathway in layers n. exc 30cm thick, including watering and consolidation as directed.
Supply & Fix machine pressed Pre-cast cement concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80mm thickness M-40 Grade with grey cement and no pigment, colour laid over and including machine compacted sand cushion all as specified and directed.
Material and labour for 20mm thick screed bed or bedding layer in CM 1:4 for laying of tiles, complete all as specified and directed.
Material and labour for Chequered cement concrete tiles 20cmx20cmx25mm thick, set, jointed and pointed with white cement and pigment in floors, complete all as specified and directed.
M & L Rendering 15mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement all as specified.
M&L for RCC (Nominal mix), 1:2:4 type B1 (20 mm graded aggregates) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete concrete all as specified and directed.
Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides of soffit (if any) of foundation and plinth beams, and similar work vertical or batter for rough finished surface all as specified and directed.
M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete as specified.
S & F Rolled mild steel in sections Fe 410 grade E-250 as in framing for poles, cladding, glazing and the like fixed with angle cleats and connecting plates, etc
S & F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 E-250 all as specified and as directed.
S & F Mild steel bolts diameter of neck exc 12 and n.exc 20mm purpose made. with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut. Exc 30cm long all as specified.
S & F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment all as specified and as directed.
S & F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet (flat) 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensilestrength of 550 Mpa as in ridges/eaves gutter, fixed with self tapping screws as specified.
M & L for two coats of synthetic enamel paint over a coat of primer including preparation of new steel surfaces not otherwise described, over 10cm width or girth complete all as specified.
Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm surfaces incl comlete removal of existing treatment on old surfaces. Make: APEX from Asian Paint or Equivalent in BERGER/ NEROLAC.
M & L for two coats of cement based paint on newly plastered cement painted walls, pillasters, cornices, etc., including necessary preparation of surfaces all as specified and as directed.
M & L for Complete removal existing tretment on walls washing, rubbing down and stopping of existing treatment Two coats of cement based paint over a coat of primer on walls, pillasters, cornices, etc., including necessary prepration of old finished surfaces all as specified and as directed
M&L Cement concrete 1:2:4 ( type B-2), (40 mm graded crushed stone aggregate) as in mass concrete & filling etc complete all as specified and directed
S & F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165all as specified and as directed.
Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed complete all as specified
M&L Rendering 15mm thick cement mortar in 1:4 on fare face of brick work or concrete surfaces even and smoothe without using extra cement complete all as specified and directed.
S&F Powder Coated aluminium frame (minimum thickness of powder coating 50 micron) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified Note: Glass will be measured and paid seperately.
S&F Powder Coated aluminium door shutters (minimum thickness of powder coating 50 micron) aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified. Note: Glass will be measured and paid seperately.
S&F Aluminium extruded section body, Door closer hydraulically regulated, deisignation No.3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg and fixed, complete all as specified and directed.
M&L for 12 mm thick prelaminated particle board, interior grade, prelaminated both sides with decorative choice laminations, fixed with screws to timber frame work, all as specified and directed.
Supply only Sheet glass of 5.5mm, ordinary quality, in squares n.exc 0.5 sq. m each pane complete all as specified.
Taking down carefully copper/aluminium point wiring of any type of batten or conduit (Light, Fan, Socket or power) complete removing material from site and making good the disturbed surfaces of walls, roofs etc including two coats of white/colour washing/ distempering etc to match the existing complete all as directed by EIC.
Taking down fan, sealing cable end,dismantling blades and removing fan and blades to store and after false ceiling work hanging only ceiling fan (M.D supply) with extension rod as per site required and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and directed.
Taking down carefully unserviceable sub main wiring of any size and type including making good the disturbed surfaces of walls, ceilings etc including two coats of white /colour washing/ distempering etc to match the existing complete all as directed by EIC.
Taking down carefully unserviceable distribution boards/metal enclosures of any type and capacity including wooden board and making good the disturbed surfaces of walls, ceilings etc including two coats of white/colour washing/ distempering etc to match the existing complete all as directed by EIC.
M & L point wiring with 1.5 sqmm nominal cross sectional area, single core, 1100 Volts FRLS grade, stranded, PVC insulated, unsheathed copper conductor cable drawn through PVC concealed conduit of suitable size, complete with all PVC conduit accessories/ fittings, brass screws, washers etc, Sunk Zinc coated pressed steel terminal boxes to accomodate modular switches & plates including all cutting/chases etc in walls and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated copper conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed for One light point /Fan point controlled by one switch.
All as per item No.45 above but One 5 Amps socket point on same board with other switches
All as per item No.45 above but One 5 Amps socket point on independent board.
All as per item No.45 above but wiring complete with 2.5 Sqmm for 3 pin 15A socket multipurpose on independent board .
All as per item No.45 above but wiring complete with 4 Sqmm for AC point
Material and Labour for ceiling rose 3 terminals complete all as specified & directed.
Supply & fixing modular switch 06 Amps 1 module complete all as specified & directed
S & F modular socket 06 Amps 2/3 pin combined 2 module complete all as specified & directed.
Supply & fixing modular switch 16 Amps 1 module complete all as specified & directed
S & F modular socket 06/16 Amps 2/3 pin combined 2 module complete all as specified & directed.
S&F modular White cover plate with frame 3 module complete all as specified & directed
S&F modular metal flush box 3 module complete all as specified and directed.
S&F modular White cover plate with frame 6 module complete all as specified & directed
S&F modular metal flush box 6 module complete all as specified and directed.
S&F modular White cover plate with frame 12 module complete all as specified & directed
S&F modular metal flush box 12 module complete all as specified and directed.
S & F in repair electronic fan regulator modular type, 2 module, 120W including complete all as specified and directed.
Taking down old u/s T5 28Watts light fitting, S&F Supply and fixing LED lights fitting 1x 18W, 220V AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. Make : Bajaj /CG/Philips/Havells
S&F in replacement single pole and neutrla enclosure with two pin and earth plug and socket including 1Nos MCB 20Amps capacity complete all as specified and directed by Engr-in-charge.
S & F MCB SPN 32 Amps, 'C' series, 240 V complete incl making conections all as specified and directed.
S & F MCB SP 6-32 Amps, 'C' series, 240 V complete incl making conections all as specified and directed.
S & F MCB DB SPN 8 Way with 200 Amps rated busbar, Double door, 240 volts flush to wall including all cutting etc on wall and making good the disturbed surfaces to match the existing complete all as specified and directed.
M & L for sub main wiring complete with two runs of 4 Sqmm single core FRLS grade PVC insulated unsheathed cable 1100Volt grade multistranded copper conductor drawn through and including PVC conduit/ casing caping of suitable size and accessories in concealed/surface of wall, roofs etc with one run of PVC insulated copper conductor 2.5 Sqmm single core as earth continuity conductor connected with earth dolly and mains complete all as specified and directed.
Supply and fixing in repair of Earthing to panel with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick, buried directly in ground (earth pit not less than 2.25m below normal ground level) with top edge of earth plate not less than 1.5m below normal ground level connected to galvanised earth lead wire 4.0mm dia by means of bolts, nut, check nuts and washers of galvanized iron or steel all as shown in electrical plate No.3 of MES Schedule pt-I 2009, GI earth lead strip protected by GI pipe 40 mm dia light grade and connected to earth test point including excavation in any type of soil,returning filling, disposal of soil, providing charcoal dust and common salt upto top edge of earth plate, construction of PCC pit with RCC cover, funnel, watering pipe of 20mm dia GI light grade and provision of earth test point including testing on completion complete all as specified and directed.
Supply and fix Switch piano flush type single pole one way 5 Amps, 230 V complete all as specified
Supply and fix ceiling rose surface PVC / polycarbonate isolated body with three terminals all as specified and as directed.
Supply and fixing Switch socket combination 5 pin, 5 Amps, flush type universal complete all as specified
Supply and fixing Switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal complete all as specified.
Supply and fixing in repairs stepped type electronic fan regulator 5 step speed control for fans all as specified and as directed.
Supply and fixing LED lights fitting 1x 20 W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.
Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated.
Supply and fixing LT UG cable of size 16 Sqmm , 4 core XLPE insulated screened PVC bedded, galvanised steel strip wounded ,electric power cable 1100 volts ,with stranded aluminium conductor and making connection with suitable lugs complete all as specified and directed.Note: (i) Earth work excavation , sand cushioning, bricks for protection, GI pipe etc shall be measured and paid for separately under relevant items of this schedule..
Supply and Fixing in repairs MCB DB SPN 2 way,single door, 240 V, AC, 50 Hz, with 200Amp rated bus bar
Supply and Fixing in repairs MCB SPN 32 Amps rating, 10 KA 'C 'curve, 240V, 50 Hz AC Complete all as specified and as directed.
Supply and Fixing in repairs MCB SP 5 to 32 Amps rating, 10 KA Ç 'curve 240V, 50 Hz AC Complete all as specified and as directed.
Excavation in trenches in Hard / dense soil not exceeding 1.5 metre wide and not exceeding 1.5 metre deep for laying of cables etc, getting out and forming bottom surface to required gradient complete all as specified and directed.
S&F Intelligent analog addressable Multisensory smoke & thermal detectors with base, and the detector shall suitable for a common base across the system. The addressing on the system could be either with DIP switch setting/ rotary or software programmed. The detector shall be working on a fast/smouldering smokes & also for the desicipated heat across a given said area of coverage complete all as specified and directed.
S&FIntelligent analog addressable manual call point the call station shall be suitable to be fixed on a common 3"x3" junction box and shall be of the resettable type. The manual call point shall be made of 16 SWG sheet metal and shall be painted red. There shall be a preference to have LED indications on the call point for alarm condition. The cables entering the box shall be made to run through conduit which shall be concealed. The call point module shall be housed inside the back box and shall be easily accessible in case of any functional failure complete all as specified and directed.
S&F Intelligent analog addressable Electronic sounder cum strobe complete all as specified and as directed
S&F Intelligent analog response indicators complete all asspecified and as directed
S&F 04 zone loop analog addressable fire alarm control panel with capacity to take 20 detectors or devices per loop and shall have a built in battery back up of 48 hrs back up under normal condition and 8 hours back up against the alarm condition.The panel shall also be able to cater for the repeater and networking functions for any future expansions. The panel shall have an inbuilt capacity or externally connected to the voice annunciation system, such as telephone dialer and speech processor. There shall be suitable earthing done for the panel complete all as specified and as directed.
Brick protection cover on cable with sub class 'B' brick, laid dry and flat adjacent to each other complete all as specified.
Supply, Installation, commissioning and testing of Isolator base fully monitored for short/ open circuit compatible with ESP Analogue addresseble protocol, electronically addressed approved by LPCB, unit incorporated an amber LED to show when it is isolating a section of a loop complete all as specified and directed by Engr-in-Charge.
S& F Armoured shielded, sheathed and twin twisted wires inside the armoured cable, 1100 V grade with copper conductor complete with fixing accessories such as spacer plates saddle/wall clips etc of size 1.5 sqmm 04 core complete all as specified and as directed.
Supply and fixing GI earth wire 4.0 mm dia for interconnecting of earth electrodes complete all as specified and directed.
Supply, laying riddled earth soil conformed IS-1255, cushioning to cables with a layer of riddle earth soil 15cm deep before laying the cable and 8 cm depth after laying of cable, complete all as specified.
Ashraya Nirman
VARALAKSHMI CONSTRUCTIONS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .