Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.2 LAccepted-AOC | L1 | Accepted-AOC AOC Awarded | |
| 2 | L2₹38.2 L+₹5.6 L (17.3%)Rejected-AOC | L2 | Rejected-AOC Rejected | |
| 3 | L3₹47.3 L+₹14.8 L (45.4%)Rejected-AOC A 47D RAM DUTT ENCLAVE UTTAM NAGAR NEW DELHI 110059 | WEST | DELHI | 110059 | L3 | Rejected-AOC Rejected |
Tender Value
Refer Docs
EMD Value
₹50,000
Closing Date
6 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (P) AF Gurgaon
GE (P) AF Gurgaon Near Atul Kataria Chowk Gurgaon
CA NO. GE(P)AF/GUR-46/2022-23 REPAIRS TO DOORS, WINDOWS, CUP BOARDS, CEILING AND WALL PENELLING AT AF STN PALAM UNDER GE (P) AF GURGAON.
2022_MES_536863_1
GE (P) AF/Gur-46/2022-23
Open Tender
Miscellaneous Works
Item Rate
270 days
GE (P) AF Gurgaon
All as per NIT
10 documents required · 10 mandatory
₹500
GE (P) AF Gurgaon
₹50,000
Yes
10 Sept 2022
9 Jul 2022
8 Aug 2022
9 Jul 2022
6 Aug 2022
23 Jul 2022
Amount
Taking down chowkhat or frames with shutters (without taking off shutters from the frame) n.exc. 1.5 Sqm each complete all as specified and as directed.
Taking down chowkhat or frames with shutters (without taking off shutters from the frame) exceeding 1.50 sqm each and n.exc. 4 Sqm each complete all as specified and as directed.
Taking down shutters only exc 1 Sqm and n.exc. 2 Sqm each complete all as specified and as directed.
S&F 35mm thick factory made flush shutters, solid core construction, with Block board core and plywood face panels, commercial type on both the faces complete all as specified and as directed.
M&L for 35mm thick 2nd class Factory made hard wood Plain framed panelled shutters (any numbers of panels) with panels of timber flat on both sides feather edged or veneered particle board medium density wood particle board with commercial face veneers S&F to chowkats complete all as specified and directed by Engineer-in-Charge.
S&F aluminium colour powder coated door Frame and shutter single or double leaf glazed/pre laminated particle board interior panels fabricated including aluminium powder coated beading rubber Gasket and packing materials and shall be drilling in existing wall and thrust bolt suitable size complete comprising the following:- (a) Door frame section 101.60x44.45x1.93 mm fixed as per spd (b) Door Shutter Vertical Style of Size 85x44.45x2 mm as per spd. (c) Door Shutter Top style section 95.25x44.45x2.00 mm as per spd. (d) Aluminium coloured powder coated middle lock rail/bottom rail section 150x44.45x1.93mm cat No.20002. (e) Aluminium coloured powder coated Tower Bolt 02 Nos in each shutter 200 mm long as spd. (f) Aluminium coloured powder coated handle 02 Nos in each shutter 150 mm long as per spd. (g) Door Floor spring ISI Marked Make-Sandhu, Amar or equivalent. (h) Six lever mortice lock brass on in each door. (j) 12 mm thick partical board (pre laminated both face) exterior grade ISI Marked (k) Tinted glass/Plain glass(Colour) 5mm thick.
S&F aluminium coloured power coated (shade or tint as directed by GE) Side Hung window/ventilator frame and Shutter with section as per TD-109/2012 sheet (1/4 to 4/4) comprising the following:- (a) Al coloured powder coated window frame section 101.60x44.45x1.93 mm fixed as per spd (b) Aluminium coloured power coated double shutter (Glass and Wire Mesh shutter) 44x44x1.50mm top/bottom/sides style. (c) Aluminium coloured power coated butt hinges 8 Nos in each window 100 mm sizes as per spd. (d) Aluminium coloured power coated tower bolt 3 Nos in each window 150 mm long as per spd. (e) Aluminium coloured power coated handle 2 Nos in each window 100 mm long as per spd. (f) Tinted/coloured glass 5 mm thick fixed to window with rubber gasket & Al Powder coated beading. (g) Aluminium coloured power coated grill make deco grill DG-104 fixed with "H" Section. Note : If ground requirement for sliding window/AC window contractor should provide as per direction of Engineer-in-Charge without any price adjustment.
S&F in repairs aluminium powder coated Ventilator with Top Hung shutters /fixed type with section of 16 guage including necessary jointing cleats, glazing clips, rubbers gasket, anodised aluminium snap beading, screw, powder coated aluminium anodised fittings complete all as specified and directed by Engineer-in-Charge.
S&F PVC door frame of size 50x47mm with a wall thickness of 5mm made out of extruded 5mm rigid prelaminated PVC foam sheet mite cut at two corners and jointing with 2 Nos of 150mm long brackets of 15x15mm MS square tube of two vertical door profiles are to be reinforced with 19x19mm MS square tube of 19 guage WPDM rubber gasket weather seal tobe provided throughout frame the door frame shal be fixed to the wall using 100mm long MS screws through the frame by using PVC fastners. A minimum of 04 Nos screws to be provided for each vertical members and minimum 02 Nos of horizontal members,Make:-Rajshri,Sintex or Equivalent.
S&F for 30mm thick factory made solid panel prelaminated PVC door shutter consisting of frame made out of MS tube of 19 guage thickness and size of 19x19mm for styes and 15x15mm for topo and bottom rails. MS frame shall have a coat of steel primer of approved make and manufacturer. MS frame adhered with 5mm thick heat moulded PVC `L' channel of size 30x75mm forming styles and 5mm thick, 100mm wide PVC sheet for top rail lock rail and bottom rail on either side and 5mm thick 20mm wide PVC sheet as gap inserted for top rail and bottom rail. panelling of 5mm PVC sheet to be fitted in MS frame to the styles and rails with 5mm thick 30mm wide PVC sheet beading on either side and jointed together with solvent cement adhesive etc Complete all as specified and as directed by Engineer- in- Charge.
S&F in repair 18/19 mm thick prelaminated particle board interior gde prelaminated one side with with decorative choice and other side white lamination fixed with screws as in cup board shutters & shelves and pelmet boxes etc all as directed. Make : Duro/National/Archid Ply wood or equivalent out of make specified in CA .
S&F in repair 25 mm thick Block board interior Gde 2 quality commercial type decorated face veneer on one face fixed with screws as in cup board shelves etc all as directed. Make : Duro/National/Archid Ply wood or equivalent out of make specified in CA .
S&F 2nd class hard wood plain fillets not exc 3 sqcm sectional area, square, rectangular or tringular in section, wrought fixed with nails complete.
S&F in repairs 100 mm long, Stainless Steel designer pattern handles Suitable for fixing in cupboards all as directed and as specified by Engr-in Charge
S&F in repair, 40mm Magnet catcher fixing in cup board as approved by engr-in-Charge
S&F in repairs, 50 mm Stain less steel Concealed hinges suitable for cupboard complete all as specified and as directed by Engr-in-Charge
Taking down old Aluminum door/windows of any description size exc.1.5 sqm but not exc. 4.00 sqm and M&L for complete over hauling of the glass pane frame/rubber beading/aluminum glazing clip sliding system locking system incl. necessary oiling and adjustment etc and refixing in same location complete all as directed. Note :- Glass Pane/rubber beeding/aluminum beading will be measured and paid separately under subsequent items.
All as per Srl Item No 17 here-in-before above but n.exc 1.5 Sqm -ditto-
S & F in repair rubber beading to be fixed over glass panes in Aluminum windows complete all as directed.
S&F in repair, aluminum anodised glazing clip to the alumiinum window frames after fixing the glass panes complete all as specified and as directed.
Dismantling structural steel work incl. steel door, gate, window guard bars, grills etc. complete all as specified and as directed.
M&L fabricated frame work as in doors frame using MS Box section of required size for making rebate to fix Shutter and other section with gusset plate rails, braces etc. complete drilled for fixing Door Shutter with MS Butt Hinges and hole for tower bolt, sliding boltetc or other covering door etc to be prepared for hanging with and including hinges all as specified and as directed.
M&L for mild steel works as in grills and railing of Fe-410-0or Fe 310-0, complete all as specified and as directed by Engr-in-charge
M&L PCC for 1:2:4 type B-1 (using 20mm graded stone aggregate) as in coping, benching & for fixing railing, holdfast, bed block, plateform for tank etc complete all as specified and as directed.
Hacking out old broken glass (any th size, quality or description) from wooden or steel frames glazed with putty or fixed with wooden beads complete all as directed.
S&F 4.0mm thick sheet glass plain pane best quality fixing to Aluminium/Steel/wooden Sections as in Panel of Doors/Windows/Ventilator and Panelling Works with necessary fixing Arrangements viz Jointing Cleats, Glazing Clips, Rubber Packing, Screws, etc. or fixed with Oil Putty, as required/ordered at Site(s), complete and fixed all as specified and as directed.
S&F 4.0mm thick Glass pane figured pin headed type, best quality, fixing to Aluminium/Steel Sections as in Panel of Doors/ Windows Shutters and Panelling Works with necessary fixing Arrangements viz Jointing Cleats, Glazing Clips, Rubber Packing, Screws, etc. or fixed with Oil Putty, as required/ordered at Site, complete all as specified and as directed.
S&F in repair 12 mm thick prelaminated particle board interior gde prelaminated one side with with decorative choice and other side white lamination fixed with screws as in cup board shutters & shelves and pelmet boxes etc complete all as specified and as directed.
S&F in repair for Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of apoerture 1.40mm and fixed with aluminium/woodem/steel beads complete all as specified and as directed.
S&F 100mm long MS medium weight, cold rolled butt hinge ISI Marked, fixed with flat head SS screw/welded with MS frame complete all as specified and as directed.
S&F in repairs, MS Helical door spring 300 mm long complete all as specified and as directed by Engr in Charge (Note:- Helical spring will be fixed by welding if required in MS frame)
S&F 75 mm butt hinges made up of extruded anodised aluminumfixed with flat head SS screw complete all as specified and as directed.
S&F for 125mm long extruded anodised aluminum alloy handle fabricated type fixed with flatb head SS screw complete all as specified and as directed.
S&F for 150mm long anodised aluminum barrel tower bolt of extruded aluminium section fixed with flat head ss screw complete all as specified and as directed.
S&F aluminum alloy sliding door bolt 300mm long with hasp, staple (bolt type) adnd fixing clips of sheets, cast of exctruded sections and fiing bolts or extruded section and all as specified
S&F in repair Stain less Steel telescopic Kitchen Trolley channel 20" long complete all as specified and directed by Engr in charge.
S&F in repair 300mm long MS Stove enamelled black with 16mm dia sliding door bolt with and including 06 No bolt and nuts, four on bolt plate and two on staple plate, all as specified and as directed.
S & F in repair floor door stopper of size 75 mm long aluminium alloy body and tongue, anodized with hard drawn steel spring incl cleats etc fixed to door.
S&F in repairs 25mm dia 16 gauge Aluminium powder coated curtain rods including cutting and fixing complete all as specified and as directed by Engr-in-Charge
S& F in repairs designer pattern wall bracket suitable for 25mm dia curtain rods complete all as specified and as directed by Engr in Charge
S& F in repairs designer pattern side knobs/Domes suitable for 25mm dia curtain rods complete all as specified and as directed by Engr in Charge
M&L preparation of new or previously untreated surfaces of wood of any description not otherwise described width or girth and applying two coats of synthetic enamel paint over & including one coat of pink primer complete all as specified.
M&L preparation of new or previously steel surfaces of any description not otherwise described width or girth and applying two coats of synthetic enamel paint over & incl one coat of red oxide primer complete all as specified.
S&F in repairs contineous (piano) hinges, mild steel powder coated of 40 mm width of flaps(when open) complete all as specified.
Demolition of wall and ceiling and boards (Fibre, pulp, insulation etc.) or insulation board / slabs any thickness incl cover fillets complete all as specified and as directed.
M&L for suspended false ceiling consisting of suitable GI sections of ‘T’ Angle & FI as per Std engineering practices with ‘E’ board classic ceiling boards 4mm thick in grid of 0.60x0.60mtr including cutting holes and making good holes for main joints, suspending with 4mm dia GI wire to roof slab, roof trusses, purlins & rafters etc and all as per approved and directed
S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement & fixing at site on PVC frame complete all as specified and as directed.
S&F in repairs aluminum door seal fixed to bottom of door shutters complete all as specified by engr in charge
S&F in repair, 6mm thick Glass shelf (22x6") with Brass CP Bracket with brass nut, complete all as specified and directed by Engr in charge. Cat part No- ES01A of make-Nixo/hilife or equivalent out of makes specified in list of makes.
S&F in repair, 6mm thick glass corner shelf (12"x12") with C type Brass CP bracket, complete all as specified and directed by Engr in charge. Cat No-ES03A of Make-Nixo/Hilife or equivalent out of makes specified in list of makes.
Taking down Cement Plaster from wall and ceiling in patches of any description including raking out Joints, hacking for Key, scrubbing down with Water, etc., and removing same from the Site(s). (Note :- Rate included for four storey building including scaffolding and all safety measures)
M&L for 15mm thick rendering in CM 1:4 on fair faces of brick or concrete surfaces including finishing even and smooth without using extra cement all as specified and as directed by Engineer in Charge.
Dismantling Plain or corrugated steel sheeting any guage, thickness, including removing to store complete all as specified and as directed.
Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to walls,fixed vwith self tapping screws as specifierd
Taking down old U/s rolling shutter /steel gate of area n exc 25 Sqm Each of any discription and refixing after overhauling including nessary welding of iron plates replacement of bottoms strips replacement of springs , replacement of gear , replacement of ball bearing , replacement of MS sheeet hood, making of good surfaces , applyng 2 coats of synthetic enamel paint over a coat of primer and refixing with smooth functioning complete all as specified and as directed by engr-in-charge.
M&L for 20 mm thick granite (any type) slab for window cills and etc laid with 15 mm thick CM 1:4 as in bedded in floor/wall and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing all as specified and directed by Engr-in-charge
M&L for preparing new plastered surfaces plastered on walls including cornices plasters and applying two coat of oil bound distemper in patches over a coat of primer complete and over 1 to 2 mm thick birla putty punning complete all as specified.
M&L for 15mm thick rendering in CM 1:6 by using manufacture/washed stone yellow/grey sand for plaster on fair faces of brick or concrete surfaces including finishing even and smooth without using extra cement all as specified and as directed by Engineer in Charge.
M&L for 10mm thick rendering on concrete surfaces as in ceiling finished even and smooth w/out using extra cement in CM 1:4 by using manufacture/washed stone yellow/grey sand complete all as specified and directed by Engineer in charge.
Demolition of Cement Concrete reinforced of any description, not exc. 150mm thickness (above or below Ground Level) and removing the same from Site(s), complete all as specified and as directed.(up to 4 storey building).
Re-baring by drilling holes and fixing nozzle if required in existing concrete/brick work as in column, beams, slabs and foundation etc in any position and any description size of hole 14mm, 16mm & 22mm suitable for dowels of size 10mm, 12mm & 16mm respectively (minimum depth 140mm for 10mm & 12 mm dia bars and 180mm for 16mm dia bar, cleaning the surface properly with blow out pump & round brushes and fixing of dowel bars with epoxy resin (resin+hardner). Make: Sika, Fosroc or concressive 1450 of BASF complete all as specified and directed by Engr-in-charge. Note:- (i) Adequate lap length shall be provided as per IS-456-2000.(ii) Reinforced TMT bars where incorporated in work will be paid under item respective items of BOQ.(iii) The work shall be carried out upto four storied building with scaffolding.
M & L for RCC (1:1.5:3) Type A1 using 20mm graded Stone aggregate as in beams, Coln and chajja etc. in patches complete all as specified and as directed by Engr-in-charge
Form work to sides and soffit of beams,Coln, slabs, chajja, landings and similar work for rough finished flat surfaces complete all as specified and as directed.
S & F mild steel TMT bars 10mm dia and over cut to length bent to shape required including cranking bending spirally for hooping etc and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed.
Taking down old damaged grit wash Plaster including backing coat from wall of any description on brick/concrete surfaces including raking out Joints, hacking for Key, scrubbing down with Water, etc., and removing same from the Site(s), complete all as specified and as directed. (Note :- Rate included for four storey building including scaffolding and all safety measures)
M&L for Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand: 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified (Payment for providing grooves shall be made separately)
M&L for forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge.
Dismantling of existing roof tiles/roof treatment from roof and parapet of any description and removing the rubbish all as specified and as directed by Engr-in charge.
Cleaning top surfaces by brooming, wire brushing, removing grass, raking out joints to receive plaster and removing debris, grass etc outside the defence land complete all as specified and directed by Engineer-in-Charge. Note :- 1. Plaster shall be measured and paid separately under appropriate item of Sch ‘A’. 2.Rate of this item is inclusive of disconnect fitment at water tank or solar heater etc and refixing in the same position after compeleting of roof treatment.
M&L for 15 mm thick cement plaster by using manufacture sand in CM 1:4 on brick/concrete surfaces of roof and parapet, mixed with water proofing compound, finished even and smooth without using extra cement (Including 4 Story building) complete all as specified and as directed by Engineer-in-Charge. Note :- Water proofing compound shall be measured & paid separately.
Supply only liquid water proofing compound complete all as specified and as directed.
M&L for roof treatment applying PU & Acrylic based Elostomeric Coat in UV shafe having OVOC coating apply two coats as per manufacturer's instructions to protect roof over clean plastered surface complete all as specified & directed by Engr-in-charge. Note :- (i) Water proofing gurantee for 10 years should be included in the quoted rate.
Demolition of brick masonry work, built in cement mortar of any description including rubbish of the premises complete all as specified and directed by Engineer-in-Charge.
M&L for brick work with sub class 'B' bricks straight or curved on plan exceeding 6m mean radius built in CM 1:4 including raking out joints complete all as specified and directed by Engr-in-charge
S&F PVC (SWR) Pipes 110mm in Bore (dia), Single Socketed, in any length with Rubber Ring Joints fixed to Walls or Laid in Floors, etc, including Taking down /up unserviceable Pipe, complete all as specified and as directed.
S&F PVC (SWR) Pipes 75mm in Bore (dia), Single Socketed, in any length with Rubber Ring Joints fixed to Walls or Laid in Floors, etc, including Taking down /up unserviceable Pipe, complete all as specified and as directed.
S&F PVC (SWR) Bend suitable for PVC (SWR) Pipes 110mm in dia, jointing with Solvent Cement and fixed-in-repairs, complete all as specified and as directed.
S&F PVC (SWR) Bend suitable for PVC (SWR) Pipes 75mm in dia, jointing with Solvent Cement and fixed-in-repairs, complete all as specified and as directed.
S&F for Stack Clamp made of GI Channel section with 10mm dia U bolt and nut fixed to wall to hold the vertical pipe of dia up to 100/110 mm dia complete all as specified and as directed.
M&L for welding in repairs thickness of Metal to be welded n.exc 6mm for railing, Post, Angle etc complete all as specified and as directed.
S&F in repair 500 ltrs rotational moulded polyethylene water storage Three layer tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed by Engr-in-charge .
S&F in repair 1000 ltrs rotational moulded polyethylene water storage Three layer tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed by Engr-in-charge .
Taking down existing water tank of capacity 500 to 1000 Ltr and refixing after necessary cleaning/water proofing treatment on roof surface including replacement of tank nipple etc complete,
S&F in repairs 20mm dia PTMT high pressure Ball Valve with Aluminium epoxy coated rod and ball suitable to sustain water pressure from 20mm bore water, Standard of PTMT of approved make with Minimum weight 210 Gm, any Colour complete all as specified and as directed.
S&F Galvanised Steel Water Tubing 20mm Bore (dia), ‘Medium Grade’ with all ISI marked Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation including Taking up or down unserviceable Steel Water Tubing with Fittings and Connections, etc. complete all as specified and as directed.
S&F Galvanised Steel Water Tubing 25mm Bore (dia), ‘Medium Grade’ with all ISI marked Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation including Taking up or down unserviceable Steel Water Tubing with Fittings and Connections, etc. complete all as specified and as directed.
S&F in repairs 20 mm Bore Gun metal globe/gate valves with iron lever fixed, screwed both ends complete all as specified and as directed by Engineer in charge.
S&F in repairs 25 mm Bore Gun metal globe/gate valves with iron lever fixed, screwed both ends complete all as specified and as directed by Engineer in charge.
S&F Structural steel Beam and stanchion fixed in wall to support old slab by cutting and pining in existing walls cut to shape, drilled & welding etc, as necessary, gusset plates, each fixed independently, conforming to Fe 410w (GDE -E-250) and repair the hole with PCC 1:2:4 and making good with plaster complete.
Repairs to old Steel gate leaf of size 1.50 to 2.50m wide by taking down, repairing including cutting into the size, repairing of locking and hinging arrangement including erecting in position and welding including necessary painting complete all as specified and as directed.
M&L for preparation of newely plastered ceiling surface and applying three coats of white wash complete and all as specified and as directed
M&L for preparing new plastered wall surface including cornices plasters by brooming down or steel wire brusing, scraping down, smoke spots and applying two coat of exterior emulsion paint 100% acrylic of approved colour and shade over a coat of primer and over 1 to 2 mm thick birla putty punning complete all as specified and as directed by Engineer-in-charge including necessary scaffolding upto 4th floor.
S&F in repair mild steel works Fe-410 or 310 as in framed works such as sun Shade/ grills/ guard bar/ Cooler Stand/Stair case Railing/Balcony Railing etc by using MS tube & box/Angle section and MS flats with ends of bars shoulders and or riveted or forged into spikes complete.
M&L for preparation and old decorated surfaces of steel and iron surfaces of any description over 10 cm width or girth and applying one coats of synthetic enamel paint complete all as specified and as directed.
Removal of debris/malwa to a distance exc 10Km but n exc 15 Km and depositing out side the MD land and as directed by Engr-in-charge.
Note: The amount of Rs 1,36,125/- against Schedule of Credit on Page No 138 shall be deducted from the total amount quoted against Sch 'A' while deriving the Contract Sum for Acceptance.
kailash chawla
akhil enterprises
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .