ADDN/ALTN TO KITCHEN AND PROVN OF DRAINAGE SYSTEM AT P-218 MG ROAD AT NCC OFFRS MESS UNDER GE WEST LUCKNOW

Amount

Demolition of brick work built in CM including all quions, arches, pillars etc complete all as specified and directed.

M & L for Brickwork with fly ash bricks, straight or curved on plan exc 6 m mean radius, built in CM 1:6 complete all as specified and directed.

M & L for brick work with fly ash bricks straight or curved on plan exc 6m mean radius in half brick thick walls built in CM 1:4 complete all as specified and directed.

Taking down cement plaster or cement plastering, any description from brick wall including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

M & L for 15 mm thick rendering in CM (1:4) using WPC @ 2% by weight of cement on fair faces of brick wall or concrete surfaces finished fair and even complete all as specified and directed. (Note :- WPC shall be measured and paid separately)

Supply only Integral water proofing compound confirming to IS-2645-2003 of approved make.

M & L for 15 mm thick rendering in CM (1:6) on other than fair faces of brick wall or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M & L for 10 mm thick rendering in CM (1:3) on ceiling finished even and smooth without using extra cement complete all as specified and directed.

M & L for preparation of new surfaces of wall and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed.

M & L for complete removal of existing treatment of old surface of wall and and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed.

M & L 1 mm thick Birla white putty on new or old plastered surfaces of walls (two or more coats) complete all as specified and directed.

M & L for preparation of new plastered surface of wall and applying two coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour over and incl Priming plastered and other surfaces with alkaliresistant priming paint complete, as per manufacturer's specification, complete all as specified and directed.

M & L for complete removal of existing treatment of old surface of wall and applying distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. including over and incl Priming plastered and other surfaces with alkaliresistant priming paint complete, complete all as specified and directed.

M & L for for preparation of new plastered ceiling surface and applying three coats of white wash complete all as specified and directed.

M & L for preparation of old treated ceiling surface and applying two coats of whitewash complete all as specified and directed.

M & L preparation of new steel surface of any description exceeding 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer all as specified.

Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and removing serviceable tiles to store yard and rubbish off the primises as directed.

M & L for glazed ceramic colour tiles of size 300 x 600mm x 7mm thick on walls etc, set & jointed in neat cement slurry and pointed in white or colours cement to match the colour of tiles as in skirting/dados over and including 10mm thick backing coat in CM 1:4 all as specified and directed.

M & L for coloured vitrified ceramic tiles, Dark shade (Double Charged) 10mm thick (square/rectangular) polished, area of each tiles exceeding 0.42sqm but not exceeding 1.00sqm as in floor, set and jointed in neat cement slurry and pointed in coloured cement to match the surface over and including screed bed or bedding layer 15mm thick in cement mortar 1:6 complete all as specified and directed.

M & L 18-20mm thick granite stone slab, machine cut and polished in both side as in shelves and partition in cupboards, bedded and jointed with grey cement slurry and pointed with white cement (1:2) using marble dust with admixture of pigment to match the shades of granite stone, including rubbing, grinding, polishing including making sandwich moulding to edges complete all as specified and directed.

M & L for 20mm thick granite stone slab as in cooking platform, window cill over 15mm thick screed bed in CM 1:4 including cutting, polishing & rubbing and including rounding of exposed edges complete all as specified and directed.

M & L for drilling through holes in granite stone for pipes etc not exc. 25 mm dia all as specified.

Demolition of RCC as in lintel, shelves etc nexc 15 cm thickness (below or above ground level)

M & L for RCC 1:2:4, type B1 using 20mm graded stone aggregate in RCC lintel, shelves, hold fast etc. with necessary form work complete all as specified and directed.

M & L for Mild steel TMT bars 10mm dia and over as in reinforcement, cut to length, bent to shape required including hooking ends and binding with MS wire (annealed) not less than 0.9mm dia all as directed and specified.

Taking down steel tubing and connections and fittings 15mm bore including cleaning for refixing or removing from site complete all as specified and directed.

Taking down steel tubing and connections and fittings 20mm bore including cleaning for refixing or removing from site complete all as specified and directed.

M & L for GI tubing 15mm dia, medium grade, galvanised with all fittings fixed to wall and floor all as specified.

M & L for GI tubing 20mm dia, medium grade, galvanised with all fittings fixed to wall and floor all as specified.

M & L for cutting and chaseing in brick wall built in cement mortar for concealed GI tubing and making good in CM, 1:3 not exc 10cm in girth.

Taking down eaves Gutters rain water pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc, including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.

S & F PVC (SWR) Pipes 110 mm dia single socketed in any length with rubber ring joints , fixed to walls complete all as specified and directed.

S & F 75mm PVC SWR pipes single socketed in any length with rubber ring joints, laid in trenches or in floor complete all as specified and directed.

S & F PVC (SWR) bends any radius 110mm dia.

S & F PVC (SWR) single TEE equal 110mm dia.

S & F PVC (SWR) bends any radius 75mm dia.

S & F in repair 75mm dia PVC Floor trap incl grating fixed in floor with cement complete all as specified and directed.

S & F in repair 15mm bore CP brass wall / sink mixer fixed to GI pipe with pvc connection pipes complete all as specified.

S & F in repair cast copper alloy long body bib taps chromium plated 15mm bore pipe with crutch or butterfly handle complete all as specified and directed.

S & F in repair Angle valve cast copper alloy with capstain head chromium plated screwed down, high pressure with long shanks and fly nuts screwed for 15mm bore pipe complete as specified and directed.

S & F in repair 15mm bore PVC connection 450mm long with brass/PVC coupling and washer as directed.

S & F stainless peg sets consisting 06 Nos of pegs of approved quality complete all as specified and as directed.

S & F in repair sink with drainage board size 1145x510 mm, bowl size 560x410x200 mm made of stainless steel sheet 1.00mm thick with plugs, washers and wastes pipe & coupling etc incl bedding in cement mortar to draft wall or cantilever brackets and connection union to pipe all as specified and directed.

S & F in repair stainless steel kitchen plate rack made out of 0.63mm thick stainless steel sheet of size 750x600 mm including screws and weight not less than 5.00 Kg complete all as directed.

S & F in repair rotantional moulded polythylene water storage tanks 1000 ltr capacity (cylindrical vertical with closed top ) hoisted and fixed in position all as specified in SSR part-I complete all as specified and directed.

S & F ball valves high perssure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed 20 mm bore, complete all as specified and directed.

S & F Gun-metal, globe or gate valves 20mm with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

S & F Gun-metal, globe or gate valves 15mm with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) n.exc 1.50 Sqm and removing from site as directed.

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) exc 1.50 Sqm but not exc. 4.0sqm each and removing from site as directed.

S & F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of Frame size 65x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp?ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made

S & F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge),minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately)

S & F 0.9 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions and complete all as specified and directed.

S & F Mild steel framed work such as grills, grating, framed guard bars and similar work conforming to Fe 290 Gde E -165 complete all as specified and directed.

S & F 18mm thick factory made 100% solid WPC flush shutter (for cupboard, wardrobe ,etc) made from co-extruded three layer rigid foam sheet Single extruded) with 0.8 to 1mm thick outer layer having density not less than 1400kg/cum and density of center core not less than 600kg/cum, with prelamination on both front and back side manufactured by and ISO 9001/2015 certified company complete all as specified and directed.

S & F Powder coated Aluminium three track sliding type glazed/gauzed window shutters with 4mm thick plain sheet glass and stainless steel wire cloth with 0.36 mm dia of wire and average width of aperture 1.4mm) with members of window shutter of section 38x12x1.25 to 1.5 mm and other standard Bombay sliding sections including necessery fiber wheel rollers suitable handles to facilitate sliding and all necessary jointing cleats, glazing clips, rubber packing, powder coated aluminium snap beading, etc all as specified and directed at site.

S & F Aluminium Butt hinges, 100mm size complete all as specified and directed.

S & F 200mm long aluminium anodised barrel tower bolts of extruded section complete all as directed and directed.

S & F alumunium handle, fabricated type, anodised 150 mm long complete all as specified and directed.

S & F aluminum alloy anodized sliding door bolt 300mm long with hasp and staple (bolt type) and fixing clip of sheet and cast in extruded section and fixing bolts and sliding bolt of extruded section complete all as directed and directed.

S & F Floor door stopper of aluminium alloy body and tongue, anodised,with hard drawn steel spring,fixed 140 MM Overall length of cover plate.

S & F Continuous (piano) hinges width of flange (whene open) 30mm mild steel, bright finish or elecrogalvanised fixed with screw to timber frame work complete all as spacified and directed.

S & F 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and as directed.

S & F magnet catcher heavy duty for cupboard shutter complete all as specified and directed.

S & F 8 to 10 mm dia anchor fastner of length exc 75 mm but n. exc 150 long including drilling holes in concrete/masonary walls/ stucture using electrically operated drill machine compete all as specified and directed at site. Note-Rate quoted includes cost of one 3 mm thick GI washer and one hexagonal GI nut per bolt.

S & F in repair fancy type 25mm dia stainless steel curtain rods/Cupboard hanging rods including bracket/junctions /wall to wall and with rings of best quality as approved by Engineer-in-Charge.

Provn of modular kitchen cabinet with 28 to 30 mm thick WPC Board having 2 mm thick moulded prelam PVC sheet on both side with drawer basket, drawer slide, backs plash, fancy type SS handles & knobs, multi purpose basket, vegetable basket, cup & saucer tray and dish rack made of stainless steel materials and fixing with all necessary fittings like, SS self closing hinges decorative handles,magnets,complete all as specified and directed. (Note for measured flat in fixed position not in depth).

Earth work in excavation of all kinds of soil by mechanical means (Hydraulic excavator) / in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil complete all as specified and directed.

Surface excavation of soft/loose soil n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out complete all as specified and directed.

Removing excavated surplus soil n.exc 50m and deposting where directed at a level n.exc 1.5 m above from the starting point complete all as specified and directed.

M & L for cement concrete (1:3:6) Type C-2 (40mm graded aggregate) as in surface channels and drains complete all as specified and directed.

M & L for cement concrete 1:2:4 type B1 using 20 mm graded aggregate as in channels, benching etc complete all as specified and directed.

M & L for brickwork with sub class ‘B’ old sized burnt clay bricks, straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and directed.

M & L for rendering 15mm thick on fair faces of brick work surfaces in CM (1:4) and finished even and smooth without using extra cement complete all as specified and directed.

M & L for 25mm thick cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in coping and finishing the surfaces even and fair (without using extra cement) complete all as specified and directed.

Extra for forming fair finished drain or channel not exc 25cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and directed.

M & L for precast reinforced cement concrete (1:2:4) type B1 (Using 20mm graded stone aggrgate) as in landings, cover slabs (for manholes, drains etc), chajjas, water troughs mangers, shelves and similar articles with plain faces, set in cement mortar (1:4) complete all as specified and directed.

Taking down carefully aluminium conductor point wiring (light, socket or power) complete including fittings such as switches, ceiling roses, pendants, regulators, sockets etc. and removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately)and making good disturbed surfaces of walls, floors, etc. to match with the existing good disturbed surfaces of walls, floors etc. match with the existing complete all as specified.

M & L for Point wiring complete with 1.5 sqmm PVC (FRLS) insulated stranded copper conductor single core cable drawn through rigid non metalic PVC conduit and conduit accesseries concealed in walls/ceiling, electrogalvanised pressed steel modular metal flush box 1/2 module to 8 module concealed in wall duly painted with two coat of black bituminous paint over a coat of red oxide primer along with white cover plate with plate up to 12 module for housing modular switches, and sockets 1.5 sqmm PVC insulated (green insulation copper conductor) earth continuity cable drawn with wiring and connected to common earth dolly all as specified for :-(Modular frame and plates will paid seprately)

Ditto all as above item No 79 hereinbefore but but socket outlet point 5 amps on independent board

Ditto all as above item No 79 hereinbefore but one socket outlet point on same baord

M & L for Point wiring complete with 2.5 sqmm PVC (FRLS) insulated stranded copper conductor single core cable drawn through existing rigid non metalic PVC conduit and conduit accesseries concealed in walls/ceiling, electrogalvanised pressed steel modular metal flush box 1/2 module to 8 module concealed in wall duly painted with two coat of black bituminous paint over a coat of red oxide primer along with white cover plate with plate up to 6 module for housing modular switches, and sockets 2.5 sqmm PVC insulated (green insulation copper conductor) earth continuity cable drawn with wiring and connected to common earth dolly all as specified for :- (Modular frame and plates will paid seprately)

S&F modular switch, single pole, 1 way 5/6 Amp, 230 Volts, 1 module complete all as specified and directed.

S&F modular switches single pole, 1 way 15/16A, 230 V,1 module complete all as specified and directed.

S&F modular socket, single pole, 5 pin 5/6 Amp, 230 Volts, combined 2 module complete all as specified and directed.

S&F modular socket, single pole, 5 pin 15/16 Amp, 230 Volts, combined 2 module complete all as specified and directed.

S & F ceiling rose surface bakelight two to three terminal complete as directed

S&F modular rotary step type fan regulator, single pole, 120 W, 2 module, complete all as specified and directed.

S&F modular white cover plate with frame, 1 module complete all as specified and directed.

S&F modular white cover plate with frame, 3 module complete all as specified and directed.

S&F modular white cover plate with frame, 6 module complete all as specified and directed.

S&F modular white cover plate with frame, 8 module complete all as specified and directed.

M&L for sub main wiring comprising two single core, 4 Sq mm nominal cross sectional area multi on same copper conductor cable, PVC insulated FRLS Grade unsheathed 1100 Volts grade drawing in and over PVC conduits and conduit fittings complete (concealed type) including S&F 4 Sq mm nominal cross sectional area on same copper conductor cable, PVC insulated unsheathed 1100 Volts grade earth wire complete all as specified (Cutting chases and making good of disturbed surfaces shall deem to be including in the unit rate quoted by tendered)

S&F in replacement sub main wiring with two single core PVC insulated (FRLS) unsheathed multistranded copper conductor of size 6 sqmm nominal cross sectional area and one run of 6 sqmm nominal cross sectional area PVC insulated (FRLS) unsheathed multistranded copper conductor green colour as continuous earth wire drawn in and including not less than 20mm dia 'medium grade' PVC concealed conduits (ISI marked) and fittings complete all as specified and directed. NOTE:- One unit length shall measured as two run of main wire and one run of conduit & earth wire.

S&F sheet metal enclosure for MCB DB double door type, single pole and neutral 4 way 240 Volts with 100/125 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way complete all as specified and directed.

Supply and Fixing wall/surface mounting luminaires integrated LED Batten 20/22 W, 6500 K,100 lumens/watt , 230V with extruded Aluminium housing 4 feet long with frosted PMMA/PC diffuser & integrated electronic driver, 25k burning hours ,2.5 KV surge protection complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangements all as per specified and directed by Engr-in-charge

S&F in repair LED Building security light 24/25 Watt with high power LED source (>110lumen/watt) PDC housing, “ IP66 and IK 07 average life 50000 burning hours with 4 KV inbuilt surge protection potted driver including Electrical connection with PVC three core copper flexible wire & all necessary fixing accessories such as bracket of GI pipe light grade 40 mm dia 0.60 mtr long bend to shape as per suitable size along with all accessories, fixed on wall including bolts & nuts.

Supply and fix wall mounting fans 400 mm (white) string controlled oscillating type including provn of flexible three core cable from ceiling rose to terminal for making connection, fitting on wall including all necessary fixing accessories complete all as specified and as directed .

S&F sheet metal enclosure for MCB DB double door type, triple pole and neutral 4 way 415Volts with 100/125 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way complete all as specified and directed.

S&F in replacement of sheet metal enclosure (MCB DB) single phase and neutral with 200 Amps rated bus bar 8 way double door type , 240 volts as directed.

S&F MCB, triple pole & neutral 63 Amp, 415 volts, 10 KA breaking capacity, 'C' curve complete all as specified and directed.

S&F MCB, single pole & neutral 32-40 Amp, 230 volts, 10 KA breaking capacity, 'C' curve complete all as specified and directed.

Supply and fixing modular ac box power unit with socket plug top and MCBs with a two pin and one pin for earth plug and socket complete with one single pole MCB 20 Amp complete all as specified.

S&F MCB SP 6 to 32 Amp 240 volts 10 KA breaking capacity as directed.

Supply and fix modular type blanking plates, one module complete all as specified and directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 450 mm sweep with, blades, and frame and louvers ® including provn of flexible three core cable from ceiling rose to terminal for making connection , fitting on wall including all necessary fixing accessories complate all as specified and as directed.

Supply and fix electric water heater, storage type steel body with steel inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc including all necessary fixing accessories complate all as specified and as directed.

S&F Auto Clean Filterless Hood Wall Mounted Kitchen Chimney, Suction Capacity 1200 m³/hr AND Touch Control type minimum 60 cm including civil work as spacified and directed by engineer in charge

M & L of Earthing complete with galvanized steel earth plate electrode 600x600x6 mm thick, burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less 1.5 mtr deep below normal ground level connected to galvanized earth lead wire 4.0 mm dia by means of nut, bolts, check nut & washer of galvanized iron or of steel, earth lead protected by 15 mm dia GI pipe light grade watering pipe 20 mm dia GI light grade GI wire meshed funnel alternate layer of char coal and salt PCC chamber, reassed for and including RCC cover including all necessary excavation & earth work, earth 7.5 mtr wire connected to main switch board, testing the earthing after completion all as specified and shown in electric plate No 3 of MES SSR Part-I 1991 print and as directed .

M/S S S A ASSOCIATES (BID ID -3374679)

M/S Reliance Construction (BID ID -3360432)

MS SANTOSH KUMAR SINGH (BID ID -3365672)