Refurbishment of Toilets at CTL, GCTL, Mat. Lab. and allied civil works at Sea side Buildings, North site, BARC, Trombay, Mumbai.

Amount

Dismantling Plain Cement concrete manually / by mechanical means carefully with out damaging adjecent structures including disposal of debris within 200 m lead as per direction of Engineer-in-charge

Dismantling of RCC works carefully manually with out damaging adjecent structuresexcluding cutting of reinforcement including stacking of steel reinforcement bars and disposal of unserviceable materials within 200 m lead as per direction of Engineer-in-charge

Dismantling brick work in Cement mortar carefully with out damaging adjecent structures including stacking of materials and dispoal of unserviceable materials within 100 m lead as per direction of Engineer-in-charge

Dismantling old plaster/skirting carefully,raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 100 m lead

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 100 m lead For thickness of tiles above 25 mm and up to 40 mm

Removing/dismantling the sanitary appliances along with all connections, chiselling the embedded portions, screwing out all inter connections and proper plugging of the inlets and outlets to avoid leakages/water spilling etc.from all the floor level stacking the dismantled materials within 50 mtr. lead and as directed by Engineer-in-charge.

Dismantling Water closet, bowl type/flat back urinals with cisterns, Wash basin, flushing cistern of any size, sinks etc., including stacking of useful materials near the site and disposal of unserviceable materials within 200 m lead

Existing GI/CI/PVC etc. pipelines along with all fixtures & resurfacing the surface if required with existing finish etc. complete as directed.

Shower, Bib tap, stop cock, piller tap, gate valve, ball cock, Nahani trap, bottle trap, urinal spreader, Flush cock.

Taking out doors, windows and clear storey openings (steel /wood) shutter including stacking within 100 m lead (only shutters)of area 3.00 Sq.M and below

Lead charges for lead Exceeding 3 KM but not exceeding 4 KM, by mechanical transport including loading, unloading, stacking /levelling etc. 'Notes: The rates in respect of this Item are applicable for NET Quantities arrived at after making deduction for voids @ 20% in respect of soil and @ 30% in respect of debris from corresponding TRUCK Measurement.

Debris

Providing and laying in position cement concrete of 1:3:6 (1cement, 3crushed sand, 6graded stone aggregate of maximum size 20mm) including consolidation, finishing, curing etc. complete as per specification sand drawings but excluding the cost of Formwork shuttering, centering Complete at all levels

Supplying, Stacking and Laying of 150 mm thick rubble soling stones as under floor base including packing with smaller stone and compacting, ramming including spreading and consolidation of blinding material, moorum etc. complete all as per specifications and as directed by the Engineer-in-charge

Providing, centering, shuttering Form work using steel plates, timber planks for all types of structures including necessary strutting, proping, staging, supports etc and deshuttering the same after the specified time all as per drawings and specifications at all levels

For Sub Structure

For Super Structure

Providing Reinforcement Steel for reinforced cement concrete at all levels including supplying, preparation of bar bending schedules, cutting, bending, transporting, fixing, tieing in position with PVC coated G.I binding wire, all labour charges, cost of cover blocks in specified grade of concrete etc. complete as per specifications and drawings. 'Steel supplied by the contractor

Using TMT bars of specified grades all dia bars. TMT bars to be supplied by the contractor confirming to IS:1786.

Providing and constructing Brick work in cement mortar using Standard bricks of approved quality / class, make / brand in foundation and plinth including curing, raking out joints simultaneously pointing below plinth level if specified complete as per drawing specifications and as directed by the Engineer-in-charge

Brick work in C.M 1:6 using crushed sand.

Providing and constructing Half brick masonry using Flyash/ Flyash Lime bricks with minimum 70 kg / Sq.cm strength of approved make and size in partition walls in C.M 1:4 (using crushed sand) including scaffolding, raking out joints, curing etc. complete and with stiffners of RCC 1:2:4 (105 X 75 mm size) at every 900 mm height including form work curing etc. complete as per specifications but excluding reinforcement in Super Structure up to Floor - II level. (Reinforcement will be paid under relevant item)

Providing 15 mm thick plastering using Ready mix Internal Plastering compound of approved equivalent for Internal faces of brickwork / concrete surfaces including preparation of the surface, curing, cleaning, scaffolding complete all as per specifications and as directed at site.

Providing 20 mm thick plastering using Ready mix External Plastering compound of approved equivalent for External faces of brickwork / concrete surfaces including preparation of the surface, curing, cleaning scaffolding up to 10 metres height all as per specificationst including forming drip moulds wherever necessary and as complete. and as directed by Engineer-in-charge.

Providing and Laying cement concrete 1:2:4 in Super structute (1 cement, 2 river sand 100%, 4 Brick aggregates 20 mm to 40 mm) for filling Sunken floors of Toilet bath & kitchens admixed with proprietary water proofing compound confirming to IS 2645 and approved by Engineer-in-charge including scaffolding, consolidation, finishing curing etc.

Providing and fixing Cast Iron Nahani Trap / Floor Trap of 100 mm inlet and 75 mm outlet, (weighing 5.80 Kgs each), jointing with Lead with the connection pipes, placing as per the drawings, embedding in Cement concrete 1:2: 4 and making circular hole up to floor level using 110 mm O/D PVC pipes of 6 Kgs / sq.cm pressure and fixing 1 No 125 mm dia C. P Brass Grating , complete all as specifications and drawings and as directed by Engineer-in-charge

Providing and fixing square mouth S.W. gully trap grade 'A' complete with CI grating brick masonry chamber with water tight CI cover with frame of 300 x 300 mm size (inside) the weight of cover to be not less than 4.5 kg and frame to be not less than 2.70 kg as per standard design

150 x 100 mm size Gully Trap "P" type

Providing, Laying, jointing, fixing and testing Heavy quality(C-Class) Galvanised Iron pipes and ISI marked fittings like tees, elbows, bends, unions nipples, reducers etc. as required for the work, including testing the pipes and fittings for 10.00Kg/Sq.cm hydralic pressure with a minimum period of two hours duration with clean water, including cutting, threading, jointing with hempyarn, whitelead, jointing Teflontape, exposed/concealed by chasing walls and making good by filling with concrete 1:3:6, complete all as per specifications and drawings, including two coats of anticorrosive bitumastic paint for all concealed lines /two coats of synthetic ename paint for all exposed lines all as directed by the Engineer-in-charge.(Note: the item includes the cost of approved type of clamps and brackets for fixing of G.I pipe to walls)

15 mm dia G.I pipe

20 mm dia G.I pipe

40 mm dia G.I pipe

50 mm dia G.I pipe

Providing, supplying, fixing in position, under floors or in walls Centrifugally cast iron pipes including required specials like bends, tees, 'Y' collers, cowl etc for Soil, waste and ventilation pipes Confirming to IS.3989 ( approved make) including cost of Jointing with spun yarn and molten lead of specified quantity, caulking the joints, including testing of pipes,painting with primer, fixing at walls with necessary approved type of clamps and brackets complete all as per drawings and specifications and as directed at site.

75 mm dia Centrifugally cast (spun) iron socketed pipe as per IS:3989 using 0.90 kg lead / joint

100 mm dia Centrifugally cast (spun) iron socketed pipe as per IS:3989 using 1.00 kg lead / joint

Providing & fixing in position heavy pattern screw down gun metal Gate Valve with handles and wheels conforming to IS:778 including testing for 10Kg/cm2 pressure with clean and potable water with a minimum testing duration of two hours etc.as per specification and as directed by the Engineer-in-charge.

Providing and fixing white vitreous china laboratory sink of size 530 x 430 x 180 mm with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass trap with C.P. brass unions complete including painting the fittings and brackets with 3 coats of white enamel paint over a coat of primer, cutting and making good the walls wherever required complete as per specifications and as directed by the Engineer-in-Charge.

Providing and fixing viterious China washbasin of approved make and colour with C.I. brackets, 15mm C.P. brass pillar tap of approved make, 15mm x 600mm long PVC Inlet connection, 32 mm heavy quality C.P. brass waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls and testing complete all as per specifications and as directed by the Engineer-in-charge

White vitreous China washbasin size 630 x 4450 mm and equivalent sizes with single 15 mm C.P. brass pillar tap

White vitreous China counter top / counter below wash basin size 560 x 410 mm /560 x 450 mm with single 15 mm C.P. brass pillar tap (OVAL / ROUND Models)

Providing and fixing Heavy Quality CP Brass Bottle trap 31/32 mm approved make) single piece moulded with height of 270mm, effective length of tail pipe 260 mm from the centre of the waste coupling 77 mm breadth with 25 mm minimum water seal,of approved make for wash basins / urinal etc all as per specifications and directed by the Engineer in Charge.

Providing and fixing Heavy Quality 15mm C.P brass swan neck pillar cock of approved make as per specifications and as directed by the Engineer-in-charge.

Providing and fixing C.P brass bib cock of heavy quality of specified / approved make as per specifications and as directed by the Engineer-in-charge

15 mm dia bib cock of approved type and make .

Providing and fixing 15mm C.P brass pillar cock of heavy quality of approved make and type as per specifications and as directed by Engineer-in-charge.

Providing and fixing C.P Brass Angle cock of Heavy Quality of specified / approved make, for wash basin inlet / flush cistern etc. as per specifications and as directed by the Project Engineer (Samples to be got approved by the Project Engineer)

15 mm n.b CP Brass Angle cock of approved equivalent make and type

Providing and fixing C.P Brass Concealed Stop cock of Heavy Quality of specified / approved make as per specifications and as directed by the Project Engineer (Samples to be got approved by the Project Engineer)

15 mm n.b CP Brass Concealed stop cock of approved equivalent make and type

Providing and fixing PVC inlet connection pipes heavy quality suitable for hot and cold including CP brass unions and nuts 15 mm dia 600 mm long

Providing and fixing Heavy Quality C.P Brass waste coupling of following dia for wash basin and sink of approved make, size and quality all as directed by the Engineer-in-charge

C.P Brass Waste coupling 32 mm Dia of approved make Half threaded or Full threaded as per requirement.

CP Brass Waste coupling 38 mm dia of approved make Half threaded or Full threaded as per requirement.

Providing and fixing Heavy Quality Stainless Steel/C.P Brass Grating of approved make as specified for Floor traps /Nahani Traps all as directed by the Engineer-in-charge

SS Grating 125 mm dia

Providing and fixing Brass 15mm C.P presstomatic series auto shut urinal flush cock of approved make and quality

Providing and fixing white vitreous china European type Water Closet with 'P' or 'S' Trap with solid seat and lid of approved make, 10 litre low level white PVC flushing cistern with manually controlled device (handle lever) conforming to IS:7231, flush bend, fixing EWC with C.P brass screws, 15 mm PVC heavy quality inlet connection of 450 mm long, including testing , commissioning & cleaning etc. complete all as per drawings and specifications and as directed by the Engineer-in-charge.

E.W.C pan in White colour with ISI marked white solid plastic seat and lid.

Providing and fixing Indian water closet (Orissa pan) of apperoved make with 100 mm China ware P or S trap, One no. 10 litre High level or low level white PVC flushing cistern with flush pipe & bend with manually controlled device (handle lever) conforming to IS:7231, PVC 15 mm Inlet connection with all fittings and fixtures complete including all connection, embedding in position commissioning, cleaning etc. all as per drawings and specifications and as directed by the Engineer-in-charge.

White Vitreous china Orissa pattern W.C. pan of size 580x440 mm.

C.P. Brass towel rail 600 mm long of approved make with 30mm CP brass screws with concealed fitting arrangement all as directed by the Engineer-in-charge.

Providing and fixing white vitreous china flat back half stall urinal size 580 x 380 x 350 mm/610 mm of approved make with Push cock of approved make, with CP brass flush pipe unions, heavy quality C.P. brass spreaders, C.P waste coupling with dome grating, clamps complete all as per specifications drawings and as directed by the Engineer-in-charge

Providing and laying/fixing in position Minimum 15 mm thick double side machine polished granite slabs of size 75 x 50 cm or approved size and shape of approved colour & quality including machine/hand cut, polishing, buffing the edges all in line, level, (curvature corners if required) in cement mortar 1:3 with best workmanship, finishing, curing completefor Urinal partition in telephonic black shade by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase and finished smooth as per direction of Engineer-in-Charge.

Providing and fixing Vertical type, wall mounted, heavy duty stainless steel liquid soap dispenser of approved make (500 ml).

Providing and fixing Heavy Quality C.P Brass Health Faucet with 1.50 metres flexible hose (Hand Shower) with wall brackets or approved equivalent make and type as per specifications and as directed by the Engineer-in-charge.

Providing and fixing stainless steel toilet paper holder recessed type of approved make and type with S.S screws as directed by the Engineer-in-charge complete.

Providing and fixing mirror of superior glass of approved quality and of required shape and size with 6mm thick Plain A.C sheet backing fixed to walls with consealed Brass C.P Mirror screws and consealed washers etc.complete all as per specifications and as directed by Enginner-in-Charge

Providing and Fixing CP brass 100 mm dia shower rose with Shower arm of Specified make as per specifications and as directed by Engineer-in-charge complete

Providing and fixing IS: 3564 marked aluminium die cast body tubular type universal hydraulic door closer of approved make with necessary accessories and screws etc. in wooden doors / steel doors with necessary bolts & nuts complete as per specificationsand as directed by the Engineer-in-charge.

Providing and fixing anodised aluminium baby latch of size 75 X 12 mm ISI marked of approved make transparent or dyed to requried colour or shade with necessary screws etc.

Providing and fixing anodized aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / Z sections and other sections of approved make conforming to IS 733 and IS 1285 fixed with rawl plugs and screws or with fixing clips or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC / neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically whereever required including cleat angle, aluminium snap beading for glazing / panelling, C.P brass / stainless screws all complete as per drawings and and directions of Engineer-in-charge including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required filling the gaps using silicon grout sealent etc. (fittings glazing and panelling shall be paid for separately)..Anodised Aluminium sections (Minimum anodizing thickness of 15 micron)Note: The contractor shall provide screws, MS tie rods etc. No extra payment will be made for it. 'NOTES : 1) The rates for aluminium is inclusive of all fastners required for fabrication and fixing in the walls. 2) All joints shall be of mittered Joints. 3) A long M.S. rod threaded at both ends to be provided in all aluminium door shutters in Top & bottom Horizontal members internally connecting Vertical members and fixed with M.S washers & nuts. 4) Only Aluminium members alone shall be measured and paid for.

Extra for colour anodizing

Providing and fixing glazing in aluminium doors, window, ventilator shutters and partitions etc with PVC / Neoprene gasket etc. complete as per the architectural drawings and directions of the Engineer-in-charge (Cost of snap beading shall be paid in basic item)

With clear float glass panes of 6.00 mm thickness

With frosted glass panes of 5.00 mm thickness

Providing and fixing approved quality stain less steel body roller wheels of approved make for sliding shutters

Providing and fixing approved quality and shape star locks cum handle of approved make for sliding shutters

Providing and fixing anodised aluminium tower bolts of size 250 X 12 mm ISI marked of approved make, transparent or dyed to requried colour or shade with necessary screws etc.

Providing and fixing aluminium handles 175 mm long Inner grip 125 mm with 12 mm dia rod plate type BOW handles ISI marked of approved make, anodised transparent or dyed to req. colour or shade with necessary screws etc. complete.

Providing and fixing soap dish Jaquar CAN-1131N of approved equivalent make or approved equivalent quality or product meeting technical parameters including making good the same after fixing the Soap dish etc. complete all as per specifications and as directed by the Engineer-in-charge

Providing and fixing minimum 15 mm thick gang saw cut mirror polished (premoulded and prepolished) machine cut Granite of Telephone Black colour for kitchen platforms, vanitiy counters, Wash basin Counters, Door Frames, window sills, facias and similar locations of required size, colour and texture laid over 20 mm thick base cement mortar 1:4 (using crushed sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing the edges to give high gloss finish etc. complete as directed by the Engineer-in-charge at all levels.

Cuddapah stone slab over Kitchen Platform to support Granite Slab etc. using 25 mm to 30 mm thick machine cut double machine polished slabs in single piece upto a maximum length of 1.80 metres laid over 20 mm thick cement mortar bedding 1:4 finished to proper levels, cured etc. complete.

Providing and fixing 1st quality ceramic glazed floor tiles of minimum 300-600 mm long and 300-600 mm wide and thickness not less than 6 mm conforming to IS 15622 of approved make in all colours and shades as approved by Engineer-in-charge over a bed of 20 mm thick bed of cement mortar 1:4 (using crushed sand) and jointing with grey cement slurry including pointing with white cement based Tile grout of approved make and matching shade complete as per patterns, drawings and specifications complete as directed by the Engineer-in-charge.

Providing and fixing 1st quality ceramic glazed wall tiles confirming to IS 15622 of approved make in approved shade and colour of any size( 320x 480 mm / 300x600 mm / 300 x 450 mm and equivalent sizes) as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (using crushed sand), setting the tiles in Cement slurry and pointing the joints with matching colour Tile grout compound of approved make of matching shade including using PVC Tile Trim in the exposed corners, complete as per drawings, patterns and specifications complete.

Providing and fixing FRP door shutters flush door / panelled type with plain colour or wooden veneer finish of approved make, design & colour. made out of 1.5 mm thick FRP skin moulded over wooden frame work of 40 mm wide and required thickness wooden styles and minimum 100 mm wide lock rails and wooden blocks for door stoppers, tower bolts, baby latch, aldrop, handles etc.wherever required and core filled with Polyurethane Foam and fixing with 4 Nos 100 mm(ISI marked) stainless steel hinges with S.S. wood screws

35 mm thick panelled door type of approved colours including the cost of 100 mm ISI marked heavy quality stainless steel butt hinges with necessary screws.

Extra for providing and fixing mirrors with approved make-stainlesssteel 304 grade STUDS (with wall spacers) complete all as per specifications and as directed by the Enginner-in-charge

Providing and fixing Chlorinated PVC (CPVC) pipes having thermal stability for hot & cold water supply (as ASTM Standard 2846 & SDR - 11 Grade) including all CPVC Plain & Brass threaded fittings, fixing the pipe with clamps including chasing the walls, concealing the pipes and making good the same etc. This includeds jointing of pipes & fittings with CPVC Solvent cement & testing the joints complete all as per specifications, drawings and as directed by the Project Engineer.

40 mm outer dia CPVC pipe (Concealed).

Raising of Inspection chambers of Internal size clear dimention of 900 x 600 mm/Circular manhole 0.9 m dia in 230 thick brick masonry with Cement mortar 1:4 Plastering of 20 mm thick cement mortar 1:4 on inside & out side and all exposed sufaces finished with a floating coat of neat cement, brick corbelling at top to provide opening of 900 X 450 mm/circular manhole 0.56 m dia, Fixing of C.I Frame and cover with CC 1:2:4 concrete, and fixing Cast Iron Steps if necessary at 300mm intervals complete.(C.I steps will be paid separately under relevant item)

Taking out C.I cover with frame from R.C.C Top slab of inspection chambers of various sizes including demolishing of R.C.C work manually / by mechanical means and stacking of useful materials near the site and disposal of unserviceable materials within 50 m lead as per direction of Engineer-in-Charge

Providing and constructing Inspection chambers of Internal size clear dimention of 900 x 600 mm in 230 thick brick masonry with Cement mortat 1:4 over a bed of 150 mm thick 1:4:8 cement concrete foundation, Plastering with cement mortar 1:4 & 20 mm thick on inside, out side and all exposed sufaces finished with a floating coat of neat cement, brick corbelling at top to provide opening of 900 X 450 mm, embedding the Frame and cover with CC 1:2:4 concrete, and fixing Cast Iron Steps if necessary at 300mm intervals complete . Depth of Chamber not exceeding 900 mm. (Excavation, Soling, Cast Iron Cover and C.I steps will be paid separately under relevant item)

Extra Depth over initial Depth of 900 mm for Chambers of 900 x 600 mm internal size.including fixing Cast Iron Steps (C.I steps shall be paid under relevant item)

Supplying and fixing Cast Iron Man hole cover or Cast Iron Steps of approved make of weight specified in the drawings or as directed by Engineer in charge.

Providing and applying white cement based wall putty of approved make over concrete or Plastered surface up to 3 mm thick to get uniform surface free from undulation including cleaning complete all as directed by the Engineer-in-charge

Providing and applying wall painting two coats on new work with premium plastic emulsion paint of approved brand to give an even shade, including a coat of approved cement primer, including preparation of the surfaces, scaffolding complete as per specifications and as directed by the Engineer-in-charge.

Providing structural Repairs in Old Damaged concrete structures /surfaces with approved Polymer. With following operations 1) Removal of loose/Spaled or damaged concrete by chipping and cleaning the concrete suface and Reinforcement steel with wire brush and with water jet.2) Cleaning the Re bars with Acetone for complete Rust removal and washing with water jet to make the surface free from Acid content. 3) Applying Protective Coat / bond coat using Polymer and Cement in the proportion of 1:1.5 ( 1 part of polymer and 1.5 parts of cement in Synthetic enamal paint like consistancy with brush 4) Reinstate the area with polymer modified mortar in layers of maximum 20 mm with the proportion of Cement 50 Kg : Washed and dried river sand 87.50 kg : Silica sand 37.50 Kg. mixed with 10 litres of Polymer (1 Kg cement : 1.75 kg Washed and dried river sand : 0.75 Kg Silica Sand : 200 ml polymer) 5) If thickness of repair exceeds 20 mm, after every 20 mm thick bond coat as per 2 above to be applied before continuing further structural repair works. This work is inclusive of all materials, labour, scaffolding complete all as directed at site. Approved equivalent make suitable for Structural repair shall be used. Payment shall be made for quantity of polymer in Litres consumed in the work. Note : Scaffolding will be paid seperately under relevant item.

Providing and fixing double Tubular scaffolding system using H- Frames / APS system or (cup lock type) on the exterior side upto seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre horizontal and vertical tubes joining with cup and lock system with M.S. tubes, M.S. tube challies, M.S clamps and M.S staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connection with building etc. wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and as approved by the Engineer -in - charge. The elevational area of the scaffolding shall be measured for payment purposes. The payment shall be made once irrespective of duration of scaffolding.

Dismantling C.I pipes of following dia in shafts / open piping including taking out the pipes manually, breaking lead caulked joints, melting of lead, making into blocks including stacking of pipes within a lead of 200 m as per direction of Engineer-in-charge

150 Dia C. I Pipe

100 Dia C. I pipe

Carrying out core cutting beyond 50 mm up to and including 100 mm Dia. size in RCC slab at various levels using Non Vibrational core drilling machine attached with circular Diamond cutting core bit as required at site & as per instruction of Engineer-in-Charge including labour, material, machine, consumable tools & tackles etc. with safety precaution etc. complete. Breaking of brick bat coba and plaster will measured and paid in relevant items

Carrying out core cutting beyond 100 mm up to and including 150 mm Dia. size in RCC slab at various levels using Non Vibrational core drilling machine attached with circular Diamond cutting core bit as required at site & as per instruction of Engineer-in-Charge including labour, material, machine, consumable tools & tackles etc. with safety precaution etc. complete. Breaking of brick bat coba and plaster will measured and paid in relevant items

Carrying out core cutting beyond 150 mm up to and including 200 mm Dia. size in RCC slab at various levels using Non Vibrational core drilling machine attached with circular Diamond cutting core bit as required at site & as per instruction of Engineer-in-Charge including labour, material, machine, consumable tools & tackles etc. with safety precaution etc. complete. Breaking of brick bat coba and plaster will measured and paid in relevant items

Providing, supplying, fixing in position in walls Rain water down take pipes using Centrifugally cast iron pipes (3.00 metres long) including required specials like bends, shoes etc for Rain water down take pipes Confirming to IS.3989 approved equivalent make including cost of Jointing with spun yarn and molten lead of specified quantity, caulking the joints, including testing of pipes, painting with primer, fixing at walls with necessary approved type of clamps and brackets complete all as per drawings and specifications and as directed at site.

150 mm C.I . Rainwater down take pipe with 1.20 Kgs lead / joint (pipe as per IS 3989)

100 mm C.I Rain water down take pipe with 1.00 kg lead / joint conforming to relevant IS

Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams

Providing SFMC Microconcrete for strengthening of structural members including mixing, pouring, curing as per manufacturer specifications and as directed by the Engineer-in-charge. 'Note : The quoted rate shall include for all lifts, leads, tools & tackles, scaffolding, cost of engaging machineries, consumables, transportation etc. complete.

Using 100% SFMC

Removing the top layer of cement mortar over brick bat coba and applying on same surface with polymer modified cement mortar with 3% polymer of weight of cement keeping water cement ratio less than 0.5 in 20 mm thick complete as per manufactures specification & as directed by Project Engineer.

M/S A.M CONSTRUCTIONS