Hubballi Division-Proposed Construction of Changing room & Seprate wash room (6-No's) For ladies station Masters and Points Women at Sulebhavi, Suldhal, Sambre, Londa, VAsco-da-Gama and Sanvordem under Sr.DEN/West/UBL jurisdication.(Maintainence Period: 36 Months)

Item Breakup - A-SCH-A

88 mm, weighing not less than 170 gms 18.0 WATER SUPPLY 18.7S C.P.V.C. PIPES Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one 18.8 step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge, Concealed work, including cutting chases and making good the wall etc. 50 18.8.2 20 mm nominal dia Pipes Metre 120 513.75 61650 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes 18.9 jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.-External work 51 18.9.1 15 mm nominal dia Pipes Metre 120 221.35 26562 52 18.9.2 20 mm nominal dia Pipes Metre 120 275.25 33030 53 18.9.3 25 mm nominal dia Pipes Metre 120 370.65 44478 C.I. SLUICE VALVES/ FIRE HYDRANTS & 18.31S FIXTURES 18.48 Providing and placing on terrace (at all floor Litre 6000 9.7 58200 levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking 54 arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 18.54S PTMT FITTINGS Providing and fixing PTMT bib cock of 18.54 approved quality and colour. 18.54.3 15 mm nominal bore, 165 mm long, weighing Each 12 156.65 1879.8 55 not less than 110 gms Providing and fixing PTMT stop cock of 18.55 approved quality and colour. 18.55.2 20 mm nominal bore, 89 mm long, weighing Each 12 113.85 1366.2 56 not less than 88 gms Providing and fixing PTMT grating of approved 18.58 quality and colour. 18.58.1 Circular type 57 18.58.1.1 100 mm nominal dia Each 12 33.2 398.4 19.0 DRAINAGE HUBLI DIVISION-ENGG/SOUTH WESTERN RLY Constructing brick masonry circular manhole 1.52 m internal dia at bottom and 0.56 m dia at top in cement mortar 1:4 (1 cement : 4 coarse sand) inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 (1 19.13 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design : 2.30 m deep with SFRC Cover and frame (heavy duty HD- 20 grade designation) 560 mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg. fixed in cement concrete 19.13.1 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately) : 19.13.1.1 With common burnt clay F.P.S. (non modular) Each 6 49193 295158 58 bricks of class designation 7.5 Total 6451491.72

Item Breakup - B-SCH-B

Preparation of Site plan, GAD and designing Sqm foundation and other structuraldesign, preparation of detailed structural drawing and submission of design calculation with check print for verification and corrections, carrying out correction as per corrected check print and submission of 4 copies of drawing with negative and floppy etc., as per general arrangement drawing and submission of completion drawing as per the execution in tracing paper/tracing film after completion of work duly incorporating any deviation/changes carried out during execution from original approved drawing without completion drawing final bill will not be finalized.

Conducting Soil Investigation from recognized Each Government Institution Note:- The Structural Drawings and Design has to be proof checked by any Governmaent Recognised University and No extra payment will be made for the same. Total 83280.00

Item Breakup - A2-SCH-A2

Item Breakup - B1-SCH-B1 ELETRICAL

Excavation in trenches in any kind of soil of cum required width for laying LT UG cables, including excavation for joints, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m

Supply and laying of high density polyethylene Metre pipe (HDPE pipe) of size 50 mm (nominal bore) category of PE-80, PN-6 along with accessories (T joint/straight coupler etc.), ISI marked and drawing LT cables all as per specification

Transportation, commissioning of LTUG cable 4cx25/4cx16/4cx35/4cx50 sqmm as per specification. Note:- LT UG cable will be issued by Railways. The contractor will be responsible for collection of cables from the Elect Maintenance/Works Depot including loading, unloading, transportation and return of un- used cables back at Depot. Costs of these provisions are deemed to be included in the quoted rates.

Supply and making end termination with brass Each double compression gland and aluminum lugs for 4 x 16 sqmm size of PVC insulated and PVC sheathed / XLPE aluminum conductor cable of 1.1 KV grade all as per detailed specification and as directed.

Earthning arrangements (Pipe earthing) as per Each detailed technical specification conforming to IS:3043 and as per drawing enclosed with tender specifications.

Supplying and fixing 6 way, Double door, Each single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required-

Supplying and fixing 5 A to 32 A rating, Numbers 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load, Double pole in the existing MCB DB complete with connections, testing and commissioning etc all as specified and directed. HUBLI DIVISION-ENGG/SOUTH WESTERN RLY

Supplying and fixing 5 A to 32 A rating, 240 V, Numbers 18.00 10 kA, "C" curve, miniature circuit breaker suitable for inductive load, Single pole in the existing MCB DB complete with connections, testing and commissioning etc, all as specified and directed

Supplying & fixing of 20/22 W LED Batten Numbers 24.00 fitting, 240 V AC with diffuser and driver including all connected materials as per detailed specification and as per PCEE/SWR specifications.

Supply, Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 Nos, blades, 30 cm long down rod, 2 Nos. canopies, shackle kit, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min, 350 RPM (tolerance as per IS 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. including necessary MS hooks as required complete all as per detailed specifications and as directed by Engr-in-Charge

Supply & fixing of single phase AC 230 V, 50 Numbers Hz modular type BLDC Exhaust fan 200 mm sweep complete with all accessories such as frame with louvers, necessary mounting arrangements, nuts bolts, fasteners including making suitable openings on walls, finishing the surfaces etc all as specified and directed.

Supplying and fixing 3 pin, 5 A ceiling rose on Numbers 42.00 the existing junction box / wooden block including connections etc.all as specified and directed

Supplying and fixing suitable size Gl box with Numbers 24.00 modular plate and 28 cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. complete all as specified and as directed.

Supplying and fixing suitable size Gl box with Numbers modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. complete all as specified and as directed.

Material and labour for circuit/ submain wiring Metre along with earth wire with size of cable 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire of FRLS PVC insulated copper conductor, single core cable in surface/recessed medium class PVC conduit including all necessary connected works such as cutting chases, drilling holes on wall /ceiling etc including plastering/ making good the disturbed surfaces all as specified and as directed HUBLI DIVISION-ENGG/SOUTH WESTERN RLY

Material and labour for circuit/ submain wiring Metre along with earth wire 35 with size of cable 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire of FRLS PVC insulated copper conductor, single core cable in surface/recessed medium class PVC conduit including all necessary connected works such as cutting chases, drilling holes on wall /ceiling etc including plastering/making good the disturbed surfaces all as specified and as directed.

Material and labour for circuit/ submain wiring Metre along with earth wire with size of cable 2 X 4 sq. mm + 1 X 4 sq. mm earth wire of FRLS PVC insulated copper conductor, single core cable in surface/recessed medium class PVC conduit as required including all necessary connected works such as cutting chases, drilling holes on wall / ceiling etc including plastering / making good the disturbed surfaces all as specified and as directed.

Material and labour for point wiring to Light Numbers 42.00 fittings /Ceiling fans /Exhaust fan / calling Bell by means of 1.5 sqmm PVC insulated and multi-stranded copper wire in 25 mm dia PVC conduit pipe concealed wiring with required accessories and fixing on wall, and running of 1.5 sqmm PVC insulated and multi-stranded copper wire for earth continuity including provision of modular switch for Light fittings/Ceiling fans /Exhaust fan/ Call bell points control and ceiling rose to be mounted on round block including fixing & connection with all connected materials and works. Total 366245.76