Various electric work against Municipal Corporation for quality power supply in Aligarh City on Semi

Amount

Safe carriage of following material from Store Centre, Sarsol, Aligarh to the respective site of work including the work of its loading & unloading at the repective ends and its erection as per direction of supervising engineer, including the cost of arrangement of labour, T&P carrier etc. required for proper completion of work as per RESSPO Norms:-

ST Pole 11 Meter Long

ST Pole 13 Meter Long

ST Pole 09 Meter Long

PCC Pole 8.5 Meter Long

11 KV XLPE Cable 3x70sq.mm.

11 KV XLPE Cable 3x120sq.mm.

11 KV XLPE Cable 3x185sq.mm.

ACSR Dog Conductor

ACSR Weasel Conductor

Distribution Box with Clamp

AB Cable 3x120+1x95+x16 sq.mm.

AB Cable 3x95+1x70+1x16 sq.mm.

Distribution Transformer 25 KVA

Distribution Transformer 63 KVA

Distribution Transformer 100 KVA

Distribution Transformer 250 KVA

Distribution Transformer 400 KVA

11 KV D.O. Fuse Set

11 KV TPMO

33 KV Pin Insulator

33 KV Pin with Nut

11 KV Pin Insulator with Pin

11 KV Polymer Pin Insulator with Pin

11 KV Disc Insulator

11 KV Disc fitting

L.T. XLPE Cable 3.5x150 mm.

L.T.XLPE Cable 3.5x400 mm.

33 KV V Type Cross Arm

11 KV V Type Cross Arm

33 kv Vacuum Circuit Breaker 800A,750MVA

33KV/110 Volt. PT

33KV CT/PT Metering Pole mounted Unit

33 KV Post Insulator

33 KV Control Pannel

11 KV CT/PT Pole Mounted Unit

11 KV Incoming VCB 600/300/5A

11 KVOutgoing VCB 200/100/5A

GI Wire 6 SWG

GI Wire 8 SWG

GI Wire 10 SWG

Earthing Complete

Stay complete(GI Stay Rod 16x1800mm, 5 Kgs. Stay wire 7/8, Stay clamps, Insulator, Bolts, Nuts & Washers)

Single Phase Meter Box

Battery With Charger 24 Volt

11 KV cable Jointing Kit 3x70sq.mm. (Outdoor)

11 KV cable Jointing Kit 3x120sq.mm. (Outdoor)

11 KV cable Jointing Kit 3x185sq.mm. (Outdoor)

Stone Pad

ABC Connector

Suspension Clamp with I Hook

Deadend Clamp with I Hook

AL Lug 240sqmm

AL Lug 400sqmm

Top Channel size 125x65x2240 mm.

Dropper Channel size 100x50x2028 mm.

Tee off Chennal size 125x65x1300 mm.

33 KV F Clamp

11 KV F Clamp

Base Angle size 75x75x6x2028 mm.

Pole Clamp

Danger Board with Clamp

Barbed wire

Nut Bolt & Washer

Number Plate with clamp

Gaurding Angle

I Bolt

L.T. Incoming Panel with metering equipment (1- L.T. C.T. Operated Three Phase Meter Box, 2- 6 in 1 Deep Drawn Metal Meter Box, 3- 63/100/160/250/400 KVA L.T. Distribution Boxes)

Neutral & body earthing of Distribution Transformer by digging of pit upto water level depth (approx. 125 feet) and then inserting 1-¼” dia GI pipe of ‘A’ grade, conforming to the requirement of IS specification and then connecting the top of the inserted pipe and transformer body through GI strip of size 40x6 mm with the help of nut and bolt or through gas welding, as per direction of supervising engineer. It includes the cost of all material labour, T&P, carrier etc. required for proper completion of work. The aforesaid work shall be carried out as per RESSPO norms.

Construction of plinth at various 11/0.4 KV Sub-station suitable for distribution transformer having size 5’x 5’ x 5’ out which 2’ below the ground. Work will include digging of foundation 2’ deep & brick work with Ist class bricks having cement and sand mortar of ratio 1:6 on all the walls, each of 9” thickness. The area inside the wall shall be duly filled by mud up to the height of appropriate level from ground level and shall be duly watered & rammed. Above the filling C.C. of ration 1:6:12 (Cement sand and brick ballast) giving 4” layer shall be provided. Above C.C. layer RCC layer having 4” thickness and with ratio 1:2:4 of cement sand and stone ballast shall be provided Re-enforcement shall be provided by providing net of (8 Nos. + 8 Nos.) M.S. rods of size 10 mm dia and each of 5’ length in the middle of the top of C.C. layer. The plinth shall be plastered with 12mm thick plaster in ratio 1:4 at all sides. This work will include cost of labour, T&P and all material required for construction of plinth which shall be provided by the contractor as per RESSPO Norms.

Providing and fixing of welded wire mesh fencing around transformer plinth with M.S. Angle of size 35X35X6 mm. length and 1.20 Meters height, such panels shall be supported on M.S. Angle from of size 40X40X6 mm. having 04 Nos. corner supports of height 1.65 Meters including extended legs for grouting which will be used as a door for entry of the personnel or removal/shifting of transformer with welded hinges, sliding belt etc. for locking the arrangement as per drawing and specifications the fencing will be painted one coat of red oxide primer and then two coats of bus green synthetic enamel paint. The rates should be inclusive of all materials required for proper completion of above work (length of each fencing approx. 11 Meters)

Dismantling and removal of following material from the existing line and then stacking in the respective JE’s (Store) as per direction of Supervising Engineer. It includes the work of cartage, cost of labour, T&P carrier etc. required for proper completion of work.

Dismentling of old and used conductor/ABC/XLPE Cable

Dismentling of old and used ST Pole

Dismentling of old and used Iron Scrap

Dismentling of 10KVA Distribution Transformer

Dismentling of 25KVA Distribution Transformer

Dismentling of 63KVA Distribution Transformer

Dismentling of 100KVA Distribution Transformer

Dismentling of 250KVA Distribution Transformer

SHARMA ELECTRIC WORKS