Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹9.1 CrAccepted-AOC KHASRA NO 183 10 SHYAM VIHAR HISAR HISAR HARYANA 125001 | HISAR | HARYANA | 125001 | ₹9.1 Cr Quoted ₹10.0 Cr | 1 | Accepted-AOC rates negotiated in TAC |
| 2 | 2₹10.3 CrRejected-Finance | ₹10.3 Cr | 2 | Rejected-Finance Rates at higher side |
| 3 | 3₹10.4 CrRejected-Finance | ₹10.4 Cr | 3 | Rejected-Finance Rates at higher side |
| 4 | Not Admitted-Fee/PreQual/Technical PLOT NO 219 TOP FLOOR INDUSTRIAL AREA PHASE 1 PANCHKULA HARYANA | PANCHKULA | PANCHKULA | HARYANA | - | - | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification |
Tender Value
₹9.8 Cr
EMD Value
₹19.6 L
Closing Date
19 Jan 2026, 5:00 pmClosed
Pardeep
Executive Engineer (E), Madhuban
Providing Estate Electrical Services in Maharishi Valmiki Sanskrit University at Mundri, Distt. Kaithal
2026_HBC_494621_1
2026F9A2998C FD54 4FFD 82BD 46588D1A67BB57HHC
Open Tender
Electrical Works
365 days
MUNDHRI
2 documents required · 2 mandatory
₹20,000
₹19.6 L
Yes
20 Mar 2026
5 Jan 2026
20 Jan 2026
5 Jan 2026
19 Jan 2026
5 Jan 2026
HSR PART [20.71.2]Supply, erection, testing of Ceiling fans IS marked (as per IS code 374) with suitable GI pipe complete in all respects complete as per directions of Engineer-in-charge 2. 56" (1400mm) [Through Rate]
[20.72]Supplying, errection, testing of Exhaust fan (as per IS code 374) having a capacity of 45 cubic metre per minute complete with suitable G.I sheet ducting in structure confirming to latest IS specifications complete in all respect to satisfaction of Engineer-in-charge. [Through Rate]
[20.84]Providing and fixing of insulated rubber matting suitable for 11 KV installation 1 M x 2 M x 12 mm thick (IS code 15652-40091) as per specification complete and as per directions of Engineer-in-charge [Through Rate]
[23.12]Providing and fixing outdoor duty Ply of 12 mm thick frame suitable for exhaust fan up to 450 mm sweep etc complete as required [Through Rate]
[23.22.1.10]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 1.10. Supply and erection of Modular case circuit breaker single pole/4 pole on existing wall/pedestal/Panel including bounding to earth and making necessary connections required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work. 4 pole MCCB 125 to 160 amp, 25 KA [Through Rate]
[23.22.2.2]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 2.2. MCCB Enclosure made of Sheet Steel suitable for mounting MCCB of following ratings MCCB up to 250 A FP [Through Rate]
[23.22.4.4]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 4.4. Supply and erection of double door sheet steel enclosure distribution board suitable for MCBS and ELCBS etc. recessed in wall including bonding to earth with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-Charge of the work. SPN DB Double Door 16 way ( 2 incoming and 14 outgoing) [Through Rate]
[23.22.5.1]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 5.1. Supply and erection of miniature circuit Breaker 240/415 V in the existing distribution board including making necessary connections:- 6 amp. to 32 amp Single Pole [Through Rate]
[23.22.5.8]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 5.8. Supply and erection of miniature circuit Breaker 240/415 V in the existing distribution board including making necessary connections:- 40 amp to 63 amp. MCBs FOUR POLE [Through Rate]
[23.23.1.3]MISCELLANEOUS 1.3. Supply and fixing Galvanised Iron flexible pipe complete with socket nipples and check nuts etc. at both ends (Up to length of one metre):- Size 25 mm dia [Through Rate]
[23.23.10]MISCELLANEOUS 10. Supplying and drawing of 1 no UTP 4 pair CAT 6a LAN Cable in the existing surface/recess MS/PVC conduit as required [Through Rate]
[23.23.6.4]MISCELLANEOUS 6.4. Supply and erection of MS cable tray , duly pained as required including erection of the same on wall or ceiling with necessary fixture and other material required to complete the job in all respect up to the entire satisfaction of Engineer-in Charge of the work. MS perforated cable tray painted with powder coating 600 X 50 X 2 mm [Through Rate]
[23.23.7.4]MISCELLANEOUS 7.4. Supply and erection of cable tray cover made of 1.25 mm thick GI sheet as required including erection of the same on existing cable tray with necessary fixture and other material required to complete the job in all respect up to the entire satisfaction of Engineer-in Charge of the work. GI cable tray Cover , suitable for cable tray of 600 X 50 X 2 mm [Through Rate]
[23.23.8.2]MISCELLANEOUS 8.2. Supply and laying of multicore telephone cable conductor size 0.51 mm bright annealed copper conductor PVC insulated and sealed in existing pipe/channel and making necessary connection complete in all respect up to the entire satisfaction of the Engineer-in charge of the work. 4 pair telephone wire [Through Rate]
[23.24.1]MS STAND, BUS BAR CHAMBER AND PANELS 1. Supply and erection of M.S. angle iron frame duly welded for housing M.S. sheet & main switches etc. on it, fixed on wall by means of suitable size of rag bolts with cement concrete, duly painted with three coats of approved paint including one coat of red oxide. [Through Rate]
[23.24.2.2]MS STAND, BUS BAR CHAMBER AND PANELS 2.2. Erection of Cubical type Electrical Panels/ Feeder Pillars including necessary mounting Frame made of suitable size I section of required size on existing foundation/platform etc as required Panels/Feeder Pillars having incomers of more than 200 A and up to Four pole 400 A , Base Mounting frame made of ISMC 150*75*5.7 mm [Through Rate]
[23.24.3.5]MS STAND, BUS BAR CHAMBER AND PANELS 3.5. Supply and erection of metal clad bus bar chamber made from 1.6 mm thick M.S. sheet and fixing with rag bolts on wall or on existing pedestal/angle iron frame including bonding, detachable top and bottom including painting and necessary connection etc. (Aluminium bars). 200 amp 4 bars of 55 cm each (cross section 38 mm x 6 mm) chamber over all size 60 cm x 45 cm x 18cm [Through Rate]
[23.26.1]SAFETY ITEMS 1. Supply and erection of Medium Voltage caution notice plate of size 200*150 mm in three languages. [Through Rate]
[23.26.2]SAFETY ITEMS 2. Supply and erection of High Tension Voltage caution notice plate of size 250*200 mm in three languages. [Through Rate]
[23.26.3]SAFETY ITEMS 3. Supply and erection of shock restoration chart in glass frame. [Through Rate]
[23.26.4]SAFETY ITEMS 4. Supply & Erection of mild steel bucket stand suitable for 6 Nos. fire buckets,(but without bucket) including the cost of welding and painting of complete stand will one coat of red oxide and 2 coats of approved paint of red colour with all labour and material required to complete the job in all respect up to the entire Satisfaction engineer in charge of the work (size 6x4 made of GI pipe 32mm dia). [Through Rate]
[23.27.2]Supply and erection of Godrej Almirah typeM.S. pedestal made of 50 mm x 50 mm x 6 mm angle iron frame with 3.00 mm thick M.S. sheet covering including shutters with suitable hinges and locking arrangement with Godrej type handle including round bars . The top covering should have downward overhang of 75 mm on all sides of pedestal , having two sets of water proof ventilation holes of suitable size on the sides , at top and bottom , each set containing four Nos. holes to discharge the heat produced by the current . The shutters fixed with rubber gasket of superior quality and of suitable size to make it water proof . The pedestal duly painted both inside and outside with two coats of approved paint and primary coat and its legs are embeded upto the entire depth in 1:2:4 cement concrete block , projected 75 mm all around the pedestal and and 200 mm above the ground level including the cost of all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of the work:- 2. M.S. pedestal of size 750 mm wide , 900 mm high , 300 mm deep and bottom totally open , duly embeded in cement concrete block of size 900 mm x 450 mm x 200 mm above ground level , having a base of size 1050 mm x 600 mm x 250 mm below ground level . 0 0 [Through Rate]
[23.27.5]Supply and erection of Godrej Almirah typeM.S. pedestal made of 50 mm x 50 mm x 6 mm angle iron frame with 3.00 mm thick M.S. sheet covering including shutters with suitable hinges and locking arrangement with Godrej type handle including round bars . The top covering should have downward overhang of 75 mm on all sides of pedestal , having two sets of water proof ventilation holes of suitable size on the sides , at top and bottom , each set containing four Nos. holes to discharge the heat produced by the current . The shutters fixed with rubber gasket of superior quality and of suitable size to make it water proof . The pedestal duly painted both inside and outside with two coats of approved paint and primary coat and its legs are embeded upto the entire depth in 1:2:4 cement concrete block , projected 75 mm all around the pedestal and and 200 mm above the ground level including the cost of all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of the work:- 5. M.S. pedestal of size 1200 mm wide ,1500 mm high ,450 mm deep and bottom totally open , duly embeded in cement concrete block of size 1350 mm x 600 mm x 200 mm above ground level , having a base of size 1500 mm x 750 mm x 250 mm below ground level . 0 0 [Through Rate]
[23.4.1.2]COPPER WIRING WITH MODULAR SWITCHES IN PVC CONDUIT (SURFACE/RECESS) 1.2. Wiring for Light/Fan/call bell point with modular type switch/socket and GI box, Modular type face plate etc in 1.5 sqmm FRLS PVC insulated copper conductor cable in 1.6 mm thick PVC conduit pipe. Group B [Through Rate]
[23.4.4.2]COPPER WIRING WITH MODULAR SWITCHES IN PVC CONDUIT (SURFACE/RECESS) 4.2. Wiring in PVC conduit system for 3-pin 5amp. Plug point by using 2 no 1.5 sqmm FRLS copper wire and 1 no 1.5 Sqmm FRLS copper wire , including providing 1 no 5/6 Amp 3/5 pin Modular type socket and 1 no 5/6 Amp Modular type switch required GI Box ,modular face plate etc complete as required Group B [Through Rate]
[23.4.5.2]COPPER WIRING WITH MODULAR SWITCHES IN PVC CONDUIT (SURFACE/RECESS) 5.2. Wiring in PVC conduit system for 3-pin 15amp. Plug point by using 2 no 4 sqmm FRLS copper wire and 1 no 4 Sqmm FRLS copper wire for earthling , including providing 1 no 15/16 Amp 3/6 pin Modular socket and 1 no 15/16 Amp Modular switch required GI Box , modular face plate etc complete as required Group B [Through Rate]
[23.5.6.1]COPPER WIRING IN EXISTING PVC/MS CONDUIT PIPE SURFACE/RECESSED FOR ELECTRICAL POINTS 6.1. Wiring main and sub mains in two single core for phase and neutral wire and one single core for earth wire PVC insulated Copper conductor cable 1100 Volts grade in existing MS/PVC Conduit etc as required. 1 run of Size 1.50 Sqmm(1/1.40mm) [Through Rate]
[23.5.6.3]COPPER WIRING IN EXISTING PVC/MS CONDUIT PIPE SURFACE/RECESSED FOR ELECTRICAL POINTS 6.3. Wiring main and sub mains in two single core for phase and neutral wire and one single core for earth wire PVC insulated Copper conductor cable 1100 Volts grade in existing MS/PVC Conduit etc as required. 1 run of Size 4 Sqmm(1/2.24mm) [Through Rate]
[23.5.6.4]COPPER WIRING IN EXISTING PVC/MS CONDUIT PIPE SURFACE/RECESSED FOR ELECTRICAL POINTS 6.4. Wiring main and sub mains in two single core for phase and neutral wire and one single core for earth wire PVC insulated Copper conductor cable 1100 Volts grade in existing MS/PVC Conduit etc as required. 1 run of Size 6 Sqmm(1/2.80mm) [Through Rate]
[23.5.6.5]COPPER WIRING IN EXISTING PVC/MS CONDUIT PIPE SURFACE/RECESSED FOR ELECTRICAL POINTS 6.5. Wiring main and sub mains in two single core for phase and neutral wire and one single core for earth wire PVC insulated Copper conductor cable 1100 Volts grade in existing MS/PVC Conduit etc as required. 1 run of Size 10 Sqmm(1/3.50 mm) [Through Rate]
[23.7.6.2]PVC CONDUIT PIPE ONLY (SURFACE OR RECESSED) FOR ELECTRICAL POINTS 6.2. Supply and erection of PVC CONDUIT ISI marked (Medium) recessed in wall/ceiling etc. including the cost of PVC bends, inspection boxes, iron hooks and cement concrete etc. complete in all respect up to the entire satisfaction of Engineer-in-Charge of work. PVC pipe of 25 mm dia. [Through Rate]
[23.8.11.7]FITTING AND ACCESSORIES 11.7. Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect. step type Fan Regulator 2 modules 300 watt [Through Rate]
[23.8.4]FITTING AND ACCESSORIES 4. Supply and erection of 10.5 cm dia M.S.Fan box including 8 mm dia 30 cm long M.S. Road made into suitable suspension hook and erected in R.C.C. slab for the erection of fan complete with all labour and material required to complete the job. [Through Rate]
[24.1.1]EARTHING AND LIGHTENING ARRESTOR 1. Earthing with GL earth pipe 4.5 m long and 40 mm dia with masonry enclosures on the top etc. (but without charcoal or coke and salt) as required. [Through Rate]
[24.1.10]EARTHING AND LIGHTENING ARRESTOR 10. Providing and fixing 25 mm x 5mm copper strip on surface or in recess for connections etc. as required with all labour and material. [Through Rate]
[24.1.12]EARTHING AND LIGHTENING ARRESTOR 12. Supplying and laying 6 S.W.G G.I. wire at 0.50 m below ground level from earth electrode including thimbles, soldering etc. as required. [Through Rate]
[24.1.13]EARTHING AND LIGHTENING ARRESTOR 13. Providing and fixing 4.00 mm dia G1. Wire on surface or in recess for loop earthing as required. [Through Rate]
[24.1.2]EARTHING AND LIGHTENING ARRESTOR 2. Extra for using salt and char coal/coke for pipe earth electrode as required. [Through Rate]
[24.1.3]EARTHING AND LIGHTENING ARRESTOR 3. Earthing with G.I. earth plate 600 mmx 600 mm x 6 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) complete as required. [Through Rate]
[24.1.4]EARTHING AND LIGHTENING ARRESTOR 4. Earthing with tinned copper earth plate 600mmx600mmx3mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) etc. complete as required. [Through Rate]
[24.1.5]EARTHING AND LIGHTENING ARRESTOR 5. Extra for charcoal or coke and salt for G.I. plate or copper plate earth electrode. [Through Rate]
[24.1.7]EARTHING AND LIGHTENING ARRESTOR 7. Supplying and laying 25mm x 3 mm G.I. strip in 40 mm dia,GI pipe as/from earth electrode including soldering etc. as required. [Through Rate]
[24.1.8]EARTHING AND LIGHTENING ARRESTOR 8. Providing and fixing 25 mm x 3mm G.I. strip on surface or in recess for connections etc. as required with all labour and material. [Through Rate]
[24.1.9]EARTHING AND LIGHTENING ARRESTOR 9. Providing and fixing 25 mm x5 mm copper strip in 40 mm dia G.I. pipe from earth electrode as required. [Through Rate]
[24.10.1]CIVIL ITEMS (USED COMMONLY IN ELECTRICAL WORKS) 1. Digging & refilling of trench 30 cm wide below ground level for erection of pipe/cable (up depth of 1 Metre. underground cable excluding the cost of cable/pipe complete in all respect. [Through Rate]
[24.10.5]CIVIL ITEMS (USED COMMONLY IN ELECTRICAL WORKS) 5. Digging of pucca road of required size for making pit for of foundation for street light pole etc complete in all respect up to the entire satisfaction of Engineer-in charge. [Through Rate]
[24.14.19]LT CABLES (Aluminium Conductor, Armoured and Unarmoured) PROVIDING& ERECTION/ LAYING OF PVC/ XLPE INSULATED UNDERGROUND ALUMINIUM CONDUCTOR UNDERGROUND CABLE ONSURFACE/ EXISTING CABLE TRAY COMPLETE IN ALL RESPECT WITH NECESSARY CONNECTION UPTO THE ENTIRE SATISFACTION OF ENGINEER IN CHARGE OF THE WORK 19. 16 Sq mm 2 core (UnArm.) [Through Rate]
[24.14.24]LT CABLES (Aluminium Conductor, Armoured and Unarmoured) PROVIDING& ERECTION/ LAYING OF PVC/ XLPE INSULATED UNDERGROUND ALUMINIUM CONDUCTOR UNDERGROUND CABLE ONSURFACE/ EXISTING CABLE TRAY COMPLETE IN ALL RESPECT WITH NECESSARY CONNECTION UPTO THE ENTIRE SATISFACTION OF ENGINEER IN CHARGE OF THE WORK 24. 16 Sq mm 4 core (Arm.) [Through Rate]
[24.14.32]LT CABLES (Aluminium Conductor, Armoured and Unarmoured) PROVIDING& ERECTION/ LAYING OF PVC/ XLPE INSULATED UNDERGROUND ALUMINIUM CONDUCTOR UNDERGROUND CABLE ONSURFACE/ EXISTING CABLE TRAY COMPLETE IN ALL RESPECT WITH NECESSARY CONNECTION UPTO THE ENTIRE SATISFACTION OF ENGINEER IN CHARGE OF THE WORK 32. 25 Sq mm 4 core (Arm.) [Through Rate]
[24.14.38]LT CABLES (Aluminium Conductor, Armoured and Unarmoured) PROVIDING& ERECTION/ LAYING OF PVC/ XLPE INSULATED UNDERGROUND ALUMINIUM CONDUCTOR UNDERGROUND CABLE ONSURFACE/ EXISTING CABLE TRAY COMPLETE IN ALL RESPECT WITH NECESSARY CONNECTION UPTO THE ENTIRE SATISFACTION OF ENGINEER IN CHARGE OF THE WORK 38. 35 Sq mm 3.5 core (Arm.) [Through Rate]
[24.14.48]LT CABLES (Aluminium Conductor, Armoured and Unarmoured) PROVIDING& ERECTION/ LAYING OF PVC/ XLPE INSULATED UNDERGROUND ALUMINIUM CONDUCTOR UNDERGROUND CABLE ONSURFACE/ EXISTING CABLE TRAY COMPLETE IN ALL RESPECT WITH NECESSARY CONNECTION UPTO THE ENTIRE SATISFACTION OF ENGINEER IN CHARGE OF THE WORK 48. 50 Sq mm 4 core (Arm.) [Through Rate]
[24.14.54]LT CABLES (Aluminium Conductor, Armoured and Unarmoured) PROVIDING& ERECTION/ LAYING OF PVC/ XLPE INSULATED UNDERGROUND ALUMINIUM CONDUCTOR UNDERGROUND CABLE ONSURFACE/ EXISTING CABLE TRAY COMPLETE IN ALL RESPECT WITH NECESSARY CONNECTION UPTO THE ENTIRE SATISFACTION OF ENGINEER IN CHARGE OF THE WORK 54. 70 Sq mm 3.5 core (Arm.) [Through Rate]
[24.14.62]LT CABLES (Aluminium Conductor, Armoured and Unarmoured) PROVIDING& ERECTION/ LAYING OF PVC/ XLPE INSULATED UNDERGROUND ALUMINIUM CONDUCTOR UNDERGROUND CABLE ONSURFACE/ EXISTING CABLE TRAY COMPLETE IN ALL RESPECT WITH NECESSARY CONNECTION UPTO THE ENTIRE SATISFACTION OF ENGINEER IN CHARGE OF THE WORK 62. 95 Sq mm 3.5 core (Arm.) [Through Rate]
[24.14.70]LT CABLES (Aluminium Conductor, Armoured and Unarmoured) PROVIDING& ERECTION/ LAYING OF PVC/ XLPE INSULATED UNDERGROUND ALUMINIUM CONDUCTOR UNDERGROUND CABLE ONSURFACE/ EXISTING CABLE TRAY COMPLETE IN ALL RESPECT WITH NECESSARY CONNECTION UPTO THE ENTIRE SATISFACTION OF ENGINEER IN CHARGE OF THE WORK 70. 120 Sq mm 3.5 core (Arm.) [Through Rate]
[24.14.76]LT CABLES (Aluminium Conductor, Armoured and Unarmoured) PROVIDING& ERECTION/ LAYING OF PVC/ XLPE INSULATED UNDERGROUND ALUMINIUM CONDUCTOR UNDERGROUND CABLE ONSURFACE/ EXISTING CABLE TRAY COMPLETE IN ALL RESPECT WITH NECESSARY CONNECTION UPTO THE ENTIRE SATISFACTION OF ENGINEER IN CHARGE OF THE WORK 76. 150 Sq mm 3.5 core (Arm.) [Through Rate]
[24.14.88]LT CABLES (Aluminium Conductor, Armoured and Unarmoured) PROVIDING& ERECTION/ LAYING OF PVC/ XLPE INSULATED UNDERGROUND ALUMINIUM CONDUCTOR UNDERGROUND CABLE ONSURFACE/ EXISTING CABLE TRAY COMPLETE IN ALL RESPECT WITH NECESSARY CONNECTION UPTO THE ENTIRE SATISFACTION OF ENGINEER IN CHARGE OF THE WORK 88. 240 Sq mm 3.5 core (Arm.) [Through Rate]
[24.14.94]LT CABLES (Aluminium Conductor, Armoured and Unarmoured) PROVIDING& ERECTION/ LAYING OF PVC/ XLPE INSULATED UNDERGROUND ALUMINIUM CONDUCTOR UNDERGROUND CABLE ONSURFACE/ EXISTING CABLE TRAY COMPLETE IN ALL RESPECT WITH NECESSARY CONNECTION UPTO THE ENTIRE SATISFACTION OF ENGINEER IN CHARGE OF THE WORK 94. 300 Sq mm 3.5 core (Arm.) [Through Rate]
[24.15.3]HT CABLES (Aluminium Conductor, Armoured and Unarmoured) Providing and erection/ laying of XLPE (E) 11 KV HT Aluminium Conductor Armoured Cable ISI Mark Laid in 1 per meter below ground level with sand and bricks with all labour and material including digging and refilling of trench as required to complete the job in all respect upto the entire satisfaction of the Engineer-In-Charge of the Works 3. 70 Sq mm 3 core [Through Rate]
[24.15.4]HT CABLES (Aluminium Conductor, Armoured and Unarmoured) Providing and erection/ laying of XLPE (E) 11 KV HT Aluminium Conductor Armoured Cable ISI Mark Laid in 1 per meter below ground level with sand and bricks with all labour and material including digging and refilling of trench as required to complete the job in all respect upto the entire satisfaction of the Engineer-In-Charge of the Works 4. 95 Sq mm 3 core [Through Rate]
[24.15.8]HT CABLES (Aluminium Conductor, Armoured and Unarmoured) Providing and erection/ laying of XLPE (E) 11 KV HT Aluminium Conductor Armoured Cable ISI Mark Laid in 1 per meter below ground level with sand and bricks with all labour and material including digging and refilling of trench as required to complete the job in all respect upto the entire satisfaction of the Engineer-In-Charge of the Works 8. 240 Sq mm 3 core [Through Rate]
[24.2.10]LT CABLE 10. Supply and erection of cable route marker made of 50 cm long 10 mm dia M.S. Rod welded/riveted at the top with 10 cm dia 3 mm thick MS plate inscribed with cable word on it, having a cross arm 30 cm long of the same dia welded at the bottom, in exiting trench 45 cm below ground level. [Through Rate]
[24.2.8.10]LT CABLE 8.10. Supply and erection of aluminium lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work. 120 sqmm [Through Rate]
[24.2.8.13]LT CABLE 8.13. Supply and erection of aluminium lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work. 240 sqmm [Through Rate]
[24.2.8.14]LT CABLE 8.14. Supply and erection of aluminium lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work.300 sqmm [Through Rate]
[24.2.8.2]LT CABLE 8.2. Supply and erection of aluminium lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work. 4 sqmm to 6 sqmm [Through Rate]
[24.2.8.3]LT CABLE 8.3. Supply and erection of aluminium lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work. 10 sqmm [Through Rate]
[24.2.8.4]LT CABLE 8.4. Supply and erection of aluminium lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work. 16 sqmm [Through Rate]
[24.2.8.5]LT CABLE 8.5. Supply and erection of aluminium lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work. 25 sqmm [Through Rate]
[24.2.8.6]LT CABLE 8.6. Supply and erection of aluminium lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work. 35 sqmm [Through Rate]
[24.2.8.7]LT CABLE 8.7. Supply and erection of aluminium lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work. 50 sqmm [Through Rate]
[24.2.8.8]LT CABLE 8.8. Supply and erection of aluminium lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work. 70 sqmm [Through Rate]
[24.2.8.9]LT CABLE 8.9. Supply and erection of aluminium lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work. 95 sqmm [Through Rate]
[24.3.3.1]HT CABLE 3.1. Supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required :70 to 120 sqmm [Through Rate]
[24.3.3.3]HT CABLE 3.3. Supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required : 240 to 400 sqmm [Through Rate]
[24.3.4.1]HT CABLE 4.1. Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required :70 to 120 sqmm [Through Rate]
[24.3.4.3]HT CABLE 4.3. Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required :240 to 400 sqmm [Through Rate]
[24.3.5.3]HT CABLE 5.3. Supplying and making straight through cable jointing with heat shrinkable jointing kit complete with all accessories including ferrules suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required : 185 to 240 sqmm [Through Rate]
[24.4.15.2]STREET LIGHT 15.2. B.S.E.N. 10025 High Masts "Supply, installation, testing and commissioning of 16 mtr. long High Mast manufactured from B.S.E.N. 10025 or equivalent grade material in, 2 (two) section hot dip, galvanized inside and outside in single dip, suitable for wind velocity as per IS 875 Part-3 suitable for 9/12 nos. luminaire loading fully motorized (power tool) with starter & cable complete along with standard accessories supplied by the manufacturer with 3 nos. steel wire rope double drum system and twin dome aviation light with LED without foundation but including cost of set of foundation nut and bolts, installation at site complete in all respect upto entire satisfaction of Engineer -in-Charge Thickness of Top and Bottom Section = 3 mm & 4mm (minimum) Top Dia = 150 mm and Bottom Dia = 410mm Thickness of Galvanization - Top = 65 micron (minimum) and Bottom = 85 micron (minimum)" [Through Rate]
[24.4.2.3]STREET LIGHT 2.3. Supply and erection of GI bracket made of 32 mm dia medium class GI pipe, having 15 deg angle from horizontal, suitable for fixing on top of Street Light pole 120 cm long, with 30 cm high suitable size pole cap [Through Rate]
[24.4.6]STREET LIGHT 6. Supply and erection of Three Phase weather proof M.S. box of size 30 cm x 20 cm x 15 cm with hinged cover made of 2 mm thick MS sheet, locking arrangements, housed in wall/fixed on pole , including the cost of 1 no 4 way 16 A Bakelite connector, 1 no. 16 amp TP MCB and 4 Nos. 16 amp. neutral links fixed on Bakelite sheet in the M.S. box and necessary connections. [Through Rate]
[24.4.8.5]STREET LIGHT 8.5. Supply and erection of Hot Dip Galvanized octagonal pole of 3mm thickness, with base plate including cost of nut and bolts , earthing studs, Integral Cable termination arrangement 5 mm thick Bakelite base plate on suitable welded MS/GI bracket 32 A four way connector 2 no 10 A SP MCB , end cover and all accessories as supplied by the manufacture including Providing RCC foundation of M25 grade (1 Cement:1 Stone aggregate: 2 Coarse sand) i/c excavation, steel reinforcement (Fe 500) @80 kg/cum of concrete contents, concrete cover 50mm, anchor bolts etc. over a bed of PCC 1:5:10 of required dimensions for octagonal poles of various heights as per following specifications complete in all respects and as per directions of Engineer-in-charge 7 Metre Long pole with top dia 75 0mm and bottom dia 150 mm with base plate of size 300 x 300 x 20 mm [Through Rate]
[24.5.1.1]MISCELLANEOUS ITEMS 1.1. Supply and jointing three core submersible flat cables of approved make with bare bunched copper conductor insulated and sheathed with PVC for submersible pump motors /fountain lights etc with voltage grade 1100 volts marked with IS:694, 1990 including cost of jointing, materials as well as carriage, loading, unloading etc. complete in all respect up to the entire satisfaction of Engineer- in-Charge. Submersible Copper Cable 3 Core 1.5 sqmm [Through Rate]
[24.5.1.2]MISCELLANEOUS ITEMS 1.2. Supply and jointing three core submersible flat cables of approved make with bare bunched copper conductor insulated and sheathed with PVC for submersible pump motors /fountain lights etc with voltage grade 1100 volts marked with IS:694, 1990 including cost of jointing, materials as well as carriage, loading, unloading etc. complete in all respect up to the entire satisfaction of Engineer- in-Charge. Submersible Copper Cable 3 Core 2.5 sqmm [Through Rate]
[24.5.2.1]MISCELLANEOUS ITEMS 2.1. S/E mark double walled corrugated (DWC) HDPE, pipe 10 Kg/Cm2 ,laid 0.75 Metre below ground level including digging and refilling of earth including cost of suitable size socket/coupler for HDPE pipe including the cost of labour and material required to complete the job in all respect up to the entire satisfaction of Engineer in charge of the work. DWC/HDPE pipe 40/32 mm outer dia/ inner dia [Through Rate]
[24.5.2.2]MISCELLANEOUS ITEMS 2.2. S/E mark double walled corrugated (DWC) HDPE, pipe 10 Kg/Cm2 ,laid 0.75 Metre below ground level including digging and refilling of earth including cost of suitable size socket/coupler for HDPE pipe including the cost of labour and material required to complete the job in all respect up to the entire satisfaction of Engineer in charge of the work. DWC/HDPE pipe 50/40 mm outer dia/ inner dia [Through Rate]
[24.5.2.3]MISCELLANEOUS ITEMS 2.3. S/E mark double walled corrugated (DWC) HDPE, pipe 10 Kg/Cm2 ,laid 0.75 Metre below ground level including digging and refilling of earth including cost of suitable size socket/coupler for HDPE pipe including the cost of labour and material required to complete the job in all respect up to the entire satisfaction of Engineer in charge of the work. DWC/HDPE pipe 63/50 mm outer dia/inner dia [Through Rate]
[24.5.2.4]MISCELLANEOUS ITEMS 2.4. S/E mark double walled corrugated (DWC) HDPE, pipe 10 Kg/Cm2 ,laid 0.75 Metre below ground level including digging and refilling of earth including cost of suitable size socket/coupler for HDPE pipe including the cost of labour and material required to complete the job in all respect up to the entire satisfaction of Engineer in charge of the work. DWC/HDPE pipe 90/75 mm outer dia/inner dia [Through Rate]
[24.5.2.5]MISCELLANEOUS ITEMS 2.5. S/E mark double walled corrugated (DWC) HDPE, pipe 10 Kg/Cm2 ,laid 0.75 Metre below ground level including digging and refilling of earth including cost of suitable size socket/coupler for HDPE pipe including the cost of labour and material required to complete the job in all respect up to the entire satisfaction of Engineer in charge of the work. DWC/HDPE pipe 120/105 mm outer dia/ inner dia [Through Rate]
[24.7.5]RCC FOUNDATIONS FOR DG SET 5. 250 KVA DG Set [Through Rate]
[24.7.8]RCC FOUNDATIONS FOR DG SET 8. 750 KVA DG Set [Through Rate]
[24.9.2]RCC FOUNDATIONS FOR HIGH MAST OCTAGONAL POLES 2. Providing RCC foundation of M25 grade (1 Cement:1 Stone aggregate: 2 Coarse sand) i/c excavation, steel reinforcement (Fe 500) @ 75 kg/cum of concrete contents, concrete cover 50mm, anchor bolts etc. over a bed of PCC 1:5:10 of required dimensions for high mast octagonal poles of various heights as per following specifications complete in all respects and as per directions of Engineer-in-charge 16m high mast pole [Through Rate]
NS PART Category: Erection of supports for lines varying from 11 KV to 33 KV complete with accessories including Insulators; Sub Category: Erection Item-Erection of H.T. Dead End, H. Pole structure with two stays.
Supply, Installation, Testing and Comissioning of High Security Mi Fare Cards @approx 1000 cards 1 Product13.56MHz RFID-cards MIFARE DESFire EV2 2K - 8K 2 Material PVC 3 Read Range up to 10cm 4 Frequency13.56 MHz 5 Chip type MIFARE®
Supplying and erection of stay set complete (galvanised) with 19/20 mm dia X 1.8 metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm, thimble, stay clamps, turn buckle ( 20 mm X 60 cm ), 7/ 4.00 mm dia G.I. stay wire and strain insulator etc in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling etc. as required. /[3Q]
Supply and erection of metal exhaust fan, double ball bearing suitable for single phase A.C. 230 Volts, 50 HZ capacitor, 900 RPM (Heavy duty) complete with mounting ring, blade including aluminum anodized louver shutter (Thickness of frame 1.00 mm and blade thickness 0.80 mm) complete with fixing and making necessary connections etc.. (i) Size 300 mm sweep with louver shutter. [3Q]
Supply of 18/20 watt rating 4 feet long LED Tube light Batten suitable for operation on 230 volt, 50 Hz supply.
Supply of Wall Fan 16` Sweep ( 400mm)oscilating pipe light duty complete with built-in regulater, blade, jali etc. .Make:- as per HPHC approved Brand List WITHOUT GST..
Supply, Installation, Testing and Commissioning of UL/FM Certified Extinguishing agent filled in PESO Approved Filling Station: 4 Kg FK-5-1-12 Clean agent filled in PESO approved stored pressure type seamless steel cylinder as per IS 7285 (life 15years) with automatic type DLP valve assembly PI marked, TPED (Transportable Pressure Equipment Directive) approved, Used Standards for type approvals ISO 17871:2015 in conjunction with EN ISO 10297:2014 EN ISO 14246: 2017-12, Push in connector, End of line adapter, UL listed Pr. Switch, end of line plug, T connector, Safety Burst Disc at 28 Bar and Mounting Bracket. Stored Pressure type fitted with Pressure gauge, UV Resistance, Operating Pressure 15 bar, Hydraulic Pressure Tested to 250 bar, Burst Pressure at 350 bar, Red Powder coated. Certified by National Test House, Dept of Consumer Affairs, Govt. of India. system design as per NFPA 2001 and Installed as per LPS 1666.
Supply, Installation, Testing and Commissioning of UL/FM Certified Extinguishing agent filled in PESO Approved Filling Station: 2 Kg FK-5-1-12 Clean agent filled in PESO approved stored pressure type seamless steel cylinder as per IS 7285 (life 15years) with automatic type DLP valve assembly PI marked, TPED (Transportable Pressure Equipment Directive) approved, Used Standards for type approvals ISO 17871:2015 in conjunction with EN ISO 10297:2014 EN ISO 14246: 2017-12, Push in connector, End of line adapter, UL listed Pr. Switch, end of line plug, T connector, Safety Burst Disc at 28 Bar and Mounting Bracket. Stored Pressure type fitted with Pressure gauge, UV Resistance, Operating Pressure 15 bar, Hydraulic Pressure Tested to 250 bar, Burst Pressure at 350 bar, Red Powder coated. Certified by National Test House, Dept of Consumer Affairs, Govt. of India. system design as per NFPA 2001 and Installed as per LPS 1666
Supply, Installation, Testing and Commissioning of Master Control Unit inbuilt A/v alarm Control Panel along with sounder cum strobe of 24VDC operated red colour MS housing , 2 NO/NC potential free relay contact for Main Fire Alarm. Modbus for BMS Integration. Gas discharge led indicator, battery led indicator, system status Led indicator, AC power ON Led indicator.
Supply, Installation, Testing and Commissioning of UL Certified Linear pneumatic Heat Detection Tube (ID-6mm and OD-8mm) for automatic fire detection and suppression system made by special modified polyimide (PA), colour red RAL300, burst temperature 1310C, inner diameter 6mm, outer diameter 8mm. Pressurized with dry nitrogen at 15 bar pressure with all necessary fittings and supports. Certified by National Test House, Dept of Consumer Affairs, Govt. of India.
Supply and erection of 11 Meter PCC pole including excavation and refilling with soil, ramming and compacting in all respect as per DHBVN specifications and upto entire satisfaction of Engineer incharge of the work.
Supply and erection of 9 Meter PCC pole including excavation and refilling with soil, ramming and compacting in all respect as per DHBVN specifications and upto entire satisfaction of Engineer incharge of the work.
Supply and erection of 45 Watts LED IP66 street light fitting white colour, pressure die cast aluminium street light luminary, operation on single phase 240 v AC supply with minimum 50000 working hours ,120 Lumens /watt with power factor )0.95 with petty material required for connections to complete the job in all respect up to the entire satisfaction of engineer- in charge of the work .
Supply and erection of LED Flood light 250 Watt,Unique modular made up of pressure die cast aluminium housing with toughened glass and high power LEDs and secondary lenses with IP66 protection.Available in NB/MB/WB angles. 10KV SPD included System Efficacy =110/120/135 LPW. operation on single phase AC supply complete in all respect up to the entire satisfaction of Engineer- in -charge of the work including making necessary connections etc.
Oil Piping Supply, installation, testing and commissioning of the following MS class ‘C’ pipes cut to required lengths and installed with all welded joints. Providing the necessary fittings like elbows, tees and reducers, sockets, hot dip galvanized supports and accessories including ceiling Hanger, Hardware complete as per site requirement. MS pipes (For 625 KVA DG Set) complete in all respect up to the entire satisfaction of Engineer - in - charge of the work including making necessary connections etc.
Oil Piping Supply, installation, testing and commissioning of the following MS class ‘C’ pipes cut to required lengths and installed with all welded joints. Providing the necessary fittings like elbows, tees and reducers, sockets, hot dip galvanized supports and accessories including ceiling Hanger, Hardware complete as per site requirement. Ball valves (For 625 KVA DG Set) complete in all respect up to the entire satisfaction of Engineer - in - charge of the work including making necessary connections etc.
Oil Piping Supply, installation, testing and commissioning of the following MS class ‘C’ pipes cut to required lengths and installed with all welded joints. Providing the necessary fittings like elbows, tees and reducers, sockets, hot dip galvanized supports and accessories including ceiling Hanger, Hardware complete as per site requirement. MS pipes (For 250 KVA DG Set) complete in all respect up to the entire satisfaction of Engineer - in - charge of the work including making necessary connections etc. (For 250 KVA DG Set)
Oil Piping Supply, installation, testing and commissioning of the following MS class ‘C’ pipes cut to required lengths and installed with all welded joints. Providing the necessary fittings like elbows, tees and reducers, sockets, hot dip galvanized supports and accessories including ceiling Hanger, Hardware complete as per site requirement. Ball valves (For 250 KVA DG Set) complete in all respect up to the entire satisfaction of Engineer - in - charge of the work including making necessary connections etc. (For 250 KVA DG Set)
SITC of Providing and fixing 75 mm x 12mm GI strip on surface or in recess for connections etc. as required with all labour and material. complete in all respect upto the entire satisfaction of Engineer - in - charge of the work including making necessary connections etc.
SITC of Providing and fixing 50 mm x 6mm GI strip on surface or in recess for connections etc. as required with all labour and material. complete in all respect upto the entire satisfaction of Engineer - in - charge of the work including making necessary connections etc.
SITC of Providing and fixing 50 mm x 10mm Copper strip on surface or in recess for connections etc. as required with all labour and material. complete in all respect upto the entire satisfaction of Engineer - in - charge of the work including making necessary connections etc.
SITC of Supply and fixing of factory wired integral LED flood light luminaries with die cast aluminum housing built with driver set suitable for 80 to 90 watt. Confirming to IP 66 protection complete in all respect. complete in all respect upto the entire satisfaction of Engineer - in - charge of the work including making necessary connections etc.
Day Oil Tank Supply, installation, testing and commissioning of day oil storage tank fabricated from 6 mm thick MS plates. Tank shall include 450 mm ID manhole cover, level indicator with duly calibrated scale and flanged connection for inlet, outlet, overflow drain and probe provision for level controller and breather. complete in all respect upto the entire satisfaction of Engineer - in - charge of the work including making necessary connections etc.
Supply Installation Testing and Commissioning of Long Life Maintenance Free Earthing System. The Rod shall be of Copper Bonded Steel with 17.2 mm dia. and 10 feet length with a core of mild steel molecularly bonded with min. 250 microns coating of 99.99% pure electrolytic grade Copper and exothermically welded Cu Busbar of 50X6X200mm both tested by CPRI capable of bearing fault current of 25 kA. Along with earth enhancement compound tested by RoHs complying IEC 62561-7 in a sealed bag of minimum 30 kg (10 kg Bag x 3) resistivity is less than 0.12 ohm meter . with Suitable Poly-plastic Pit Cover with lockable arrangement. The chemical earth pit shall have minimum 25 years warranty with all term and conditions. complete in all respect upto the entire satisfaction of Engineer - in - charge of the work including making necessary connections etc.
Supply, Installation, Testing and Commissioning of UHF Long Range Readers for Boom Barriers 1 Power Supply 100-240V, DC plus 9V to 12 V(Power Adapter) 2 Interface RS232, RS485, Wiegand 26/34 (TCP/IP and Wi-Fi Optional ) 3 Indicators Buzzer 4 Housing ABS Plastic UHF RFID 5 Read Range 0 – 8m 6 Write Range 0 – 2m 7 Antenna Built-in 8dBi Linear/Circular Polarized Antenna (As per requirement) 8 Operating Mode Answer, Active, Trigger 9 Reading Rate Software Programmable 10 Operating Mode Answer, Active, Trigger 11 Power Output 0-30 dBm (adjustable) 12 Frequency Hopping FHSS
Supply, Installation, Testing and Commissioning of DC CCS2 type Dual Gun 60kW (30 plus 30kW or 60kW single gun dynamic) rating Electric Vehicle Charging Station having following features.Input Supply Requirements: Three Phase Supply, 400VAC, 3 Ph 4W plus PE, Input Power Factor: 0.9 Total Harmonic Distortion (THD): =5% Efficiency: =95% Output power rating: 60kW, Output voltage : 150-1000VDC Output DC Current: Max 200A per Gun, DC output current regulation accuracy : = ± 1% No. of Outputs: 2Nos. Connector: CCS2 Gun (IEC 62196-3), Length - 5 Mtr each. Protection: Overload, Short-Circuit, Overcurrent, overvoltage / under voltage, Over/Under Temperature, over/under frequency, Neutral loss, Surge Protection, Residual current detection: 30 mA AC, DC Insulation Monitoring. Connectivity: Ethernet/ Wifi/ BLE/ 4G/2G Communication Protocol: OCPP 1.6j Energy Metering: Independent AC Energy Meter and DC energy meter at each input and output, User authentication : RFID system (ISO/IEC14443A/B, ISO/IEC15693), OCPP, QR code, Mobile APP. User Interface: 7inch full color touchscreen LCD or better with English and Hindi viewing option, Emergency Shutdown Red Mushroom Button Status Indicators LED: Yes (Power, Available, Charging, Fault) IP and IK rating : IP54, IK10 Cooling: Forced Air Cooling, Mounting Type: Floor Mount, Operating altitude : upto 2000m Derating Above 2000m Storage temperature range: -20 degree C to 75 degree C Ambient Temperature: -20 degree C to 55 degree C, Compliance / Standards: CE, IEC61851/IEC62196-3/ ISO15118 and DIN70121, ISO9001/14001, complete in all respect upto the entire satisfaction of Engineer - in - charge of the work including making necessary connections etc. (Make:- iGreenVOLT, EATON, Tata Power, ABB India, Bolt.Earth, Delta)
CMS Software Integration one time, License for 1 charger with web portal for CMS, IOS/ Android application with integrated payment gateway, remote fault diagnostics, monitoring, OCPP 1.6 based. Mobile application will be valid for unlimited users with 1 year subscription. complete in all respect upto the entire satisfaction of Engineer - in - charge of the work including making necessary connections etc. (Make:- iGreenVOLT, EATON, Tata Power, ABB India, Bolt.Earth, Delta)
Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/ Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type-A) with blank Gunmetal/Stainless Steel cap and chain as required. complete in all respect upto the entire satisfaction of Engineer - in - charge of the work including making necessary connections etc. Single headed Gunmetal.
Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc. complete in all respect upto the entire satisfaction of Engineer - in - charge of the work including making necessary connections etc. 100 MM Dia.
Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required. complete in all respect upto the entire satisfaction of Engineer - in - charge of the work including making necessary connections etc. 4 way-150 mm dia MS Pipe.
Proving and fixing ISI Marked Dual Type Non-return valves flanged end class PN-1.6 as per IS:5312/2004 in pipe lines including jointing and cost of Nut Bolt , rubber insertion complete in all respect upto the entire satisfaction of Engineer - in - charge of the work including making necessary connections etc. i) 150mm dia (Dual Type NRV)
Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc. complete in all respect upto the entire satisfaction of Engineer - in - charge of the work including making necessary connections etc. 200mm dia.
Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A). complete in all respect upto the entire satisfaction of Engineer - in - charge of the work including making necessary connections etc. Stainless Steel (Grade 304).
Providing, laying, testing and commissioning of `C` class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete in all respect upto the entire satisfaction of Engineer - in - charge of the work including making necessary connections etc. 150mm diameter.
Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required. complete in all respect upto the entire satisfaction of Engineer - in - charge of the work including making necessary connections etc. 80mm dia
Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange. complete in all respect upto the entire satisfaction of Engineer - in - charge of the work including making necessary connections etc. (ii) 200 MM dia.
Proving and fixing ISI Marked Dual Type Non-return valves flanged end class PN-1.6 as per IS:5312/2004 in pipe lines including jointing and cost of Nut Bolt , rubber insertion etc. complete in all respect upto the entire satisfaction of Engineer - in - charge of the work including making necessary connections etc. (i) 80 mm dia (Dual Type NRV)
Supply and erection of Fire Extinguisher ISI marked CO2 type of 4.5 Kg capacity as per IS :7285 duly erected/ hags on wall with hooks i/c the cost of hook, screws etc. with all labour and material required to complete in all respect upto the entire satisfaction of Engineer - in - charge of the work including making necessary connections etc.
Providing and fixing pressure gauges with all accessories complete in all respect upto the entire satisfaction of Engineer - in - charge of the work including making necessary connections etc.
Providing, laying, testing and commissioning of `C` class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete in all respect upto the entire satisfaction of Engineer - in - charge of the work including making necessary connections etc. 80mm diameter.
Providing and Fixing of ABC Type 6 kg (Stored Pressure) Fire Extinguisher filled with Mono Ammonium Phosphate Powder MAP 50% Confirming to ‘IS 4308’, Nitrogen Pressurized, Controllable Discharge Mechanism, Pressure Gauge, Discharge Hose and Nozzle and Epoxy Polyester Powder Coated Mild Steel body, Fire Extinguishers As per ‘IS 15683 : 2018’ ISI Marked. complete in all respect upto the entire satisfaction of Engineer - in - charge of the work including making necessary connections etc.
Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required. complete in all respect upto the entire satisfaction of Engineer - in - charge of the work including making necessary connections etc. 150mm dia.
Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required. complete in all respect upto the entire satisfaction of Engineer - in - charge of the work including making necessary connections etc. 100mm dia.
Supplying, fixing, testing and commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required. complete in all respect upto the entire satisfaction of Engineer - in - charge of the work including making necessary connections etc. 100mm dia.
Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted between flange and landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete in all respect upto the entire satisfaction of Engineer - in - charge of the work including making necessary connections etc.
Providing, laying, testing and commissioning of `C` class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding. excavation and providing cement concrete blocks as supports anticorrosive treatment with coaltar/asphalt tape as per IS 10221. Refilling the trench etc. of following sizes complete in all respect upto the entire satisfaction of Engineer - in - charge of the work including making necessary connections etc. 150 mm dia
Providing, laying, testing and commissioning of `C` class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete in all respect upto the entire satisfaction of Engineer - in - charge of the work including making necessary connections etc. 100mm diameter.
Providing, laying, testing and commissioning of `C` class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete in all respect upto the entire satisfaction of Engineer - in - charge of the work including making necessary connections etc. 200mm diameter
Supply and Erection of hose box double door (750x 600x 250mm) suitable for 2 nos. hose pipe 15 meter, 1 no. short branch pipe complete in all respect. complete in all respect upto the entire satisfaction of Engineer - in - charge of the work including making necessary connections etc.
Supplying and fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required complete in all respect upto the entire satisfaction of Engineer - in - charge of the work including making necessary connections etc. Gun metal.
Supplying, fixing, testing and commissioning of double flanged sluice valve of rating PN 1.6 with non-rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required complete in all respect upto the entire satisfaction of Engineer - in - charge of the work including making necessary connections etc. 80mm dia.
Supplying, fixing, testing and commissioning of double flanged sluice valve of rating PN 1.6 with non-rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required complete in all respect upto the entire satisfaction of Engineer - in - charge of the work including making necessary connections etc. 150mm dia
Providing and fixing of pressure switch in M.S. pipe line including connection etc. as required complete in all respect upto the entire satisfaction of Engineer - in - charge of the work including making necessary connections etc.
Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS Sheet, 1200mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required. complete in all respect upto the entire satisfaction of Engineer - in - charge of the work including making necessary connections etc.
Supplying, installation, testing and commissioning of electric driven pressurisation pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Jockey Pump) Horizontal type, multistage, centrifugal pump of cast iron bodyand bronze impeller with stainless steel shaft, mechanical seal conforming to IS : 1520. Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase 50 Hz AC supply with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-`F` insulation, conforming to IS : 325. M.S.fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. Suitable cement concrete foundation duly plastered and with anti vibration pads. complete in all respect upto the entire satisfaction of Engineer - in - charge of the work including making necessary connections etc. 180 lpm at 88 m Head
SITC of NMS and Wireless Access Controller point . It should support Centrali-ed Management for WLAN and LAN Infrastructure . The Solution should support 50 AP”s and 25 switches. The solution should expandable upto 400 AP”s and 100 Switches. The Controller should 2 x 10/100/1000 Mbps Ethernet Ports, Quad-Core A72 @ 1.2 GH- Processor, 1 x 1 USB 3.0 Port, 500 Maximum Number of WLAN Groups, Multi-Site Management, Operating temp. 0 to 40 degree, Operating Humidity: 10—90% RH non- condensing. Certification: CE, FCC, RoHS. complete in all respect upto the entire satisfaction of the Engineer-in-charge of the work.
SITC of Door Frame Metal Detector with below mentioned specifications DFMD 1. General, i. Type of usage Outdoor, ii. Detection Zones Multiple Zone, iii. Function Detects ferrous, Non-Ferrous and alloy metals concealed in the body of a person when passed through it`s arch Door Frame Construction i Water proof: Yes, ii Weather proof: Yes 2. Detection i. Metals detectable Ferrous, Non-Ferrous, Ferrite and Alloys, ii. Uniform detection from top to bottom Yes, iii. Capable of Metal Detection in all orientations Yes iv. Detect multiple objects of various size, weight and shape in all the zones simultaneously form head to toe: Yes, v. Capable of Metal Detection in Walking speed of interception: Yes, vi. Performance independent of the speed of person passing through: Yes 3. Security i. Revision to secure access to the control unit by a pass word protected alpha numeric keypad: Yes, ii. Re-setting after alarm condition Auto Re-set (auto) within 3 seconds, iii. Walk/Stop indicator for traffic control Yes, iv. User friendly self-testing diagnostics to identify faulty condition: Yes 4. Power Supply / Battery i. Source of Power AC mains supply / by rechargeable battery ii Power Supply 220V plus 10% VAC. Make: Godrej, Smith, Rapiscan, garret.
SITC of Lockable outdoor IP 66 Junction box for Outdoor Switch and PDU with all necessary accessories, civil, electrical works and peripheral items. Standard. IP 65 Outdoor Pole Rack 9U x 550 W x 500 D Outdoor rack for switch Mounting. Mounting Options: Pole/Wall-Mount with optional Floor/Base-mounting provision. Construction: Welded GI steel, 1.2mm to 1.5mm thickness, front accessibility. Front Door: Equipped with filter, louver, and unique key lock.Material: Galvani-ed steel with anti-corrosive powder coating. Cooling: Two 90CFM, 230V AC fans on front door and top cover for rainwater and dust resistance. Thermal Management: Self-adhesive thermal foam installed inside.Additional Features: Door Hinges: 2 Nos. Gasket: As per IP55 standard. Hood for Air Inlet: Front side. Integrated Side Panels: Welded with canopy and bottom cover. Rigid Frame: For pole fixing. Internal Components: 19” Angles: 2 Nos. for equipment mounting. Hori-ontal Cable Manager: 1U loop type— 1 No. 6 Socket 5Amp PDU: 1 No. Cantilever Tray: 1U, 250mm Depth - 1 No. Load Capacity: 40 kgs or more (static load). Color: Dual-tone grey powder coating (RAL 7035/7037 Combo). Standards: Conforms to DIN 41494 or equivalent. 100% assured compatibility with equipment conforming complete in all respect upto the entire satisfaction of the Engineer-in-charge of the work.
SITC of SFP Module 1000Base-LX Fiber SFP LC duplex connector 1310 nm, for distances up to 10 km Single Mode Fiber ROHS Compliant Compliant with SFP Transceiver MSA specification Compliant with Specifications for IEEE 802.3z/Gigabit Ethernet Compliant with Industry Standard RFT Electrical Connector and Cage Single plus 3.3V Power Supply and TTL Logic Interface EEPROM with Serial ID Functionality `Laser Class 1 Product which comply with the requirements of IEC 60825-1 and IEC 60825-2`. All the SFP modules and Network Switches should be of same OEM. complete in all respect upto the entire satisfaction of the Engineer-in-charge of the work.
SITC of Smart Air condition Rack for server installed for CCTV system. The Rack should be having overall dimensions of minimum 800 mm wide x 1380 mm height x 1000 mm depth, IP 54 or IP 55 design, ACDB- minimum 6 Socket 5/15 Amp, Cable Manager 1U MS/PVC- Hori-ontal, Din rail kit etc. and the work should be complete in all respects with supply of Smart Air condition Rack in Police Stations at different locations in Haryana as per list attached including cartage, loading, unloading and fixing all the existing equipment`s such as Server, 24 port switch etc. with making connections of existing cables and configuration with CHMS in original condition complete in all respect with all labour and petty material required to complete the job up to the entire satisfaction of Engineer-In-Charge with following specification:- 1. Should have internal indoor Air Circular system to maintain the internal temperature of rack up to 30? C suitable for working on 24 x7. 2. The Rack should be capable to reduce the Server Noise level should not be more than 30 dB ( in vacuum environment). 3. The Rack should be indoor type with air-conditioning system inbuilt consisting of Cooling Capacity: Minimum 1000W, Air Flow of cooling system: 120 CFM, High static backward curved fan ,alarms for critical failure, Controller Unit with Electronic Microprocessor based LED display 4. Fault Protections with alarming:- High Temperature, Low Temperature, Over load/Under load, Over Voltage/under voltage, Humidity indication with control, Alarm indicators: High Temp Fault, Low Temp Fault and Cooling Fault. S. Dimension of Indoor AC Unit Should be approximate 445mm X 900mm X 260mm (W x D x H) 6.The rack should be equipped with surge protector with minimum following specification: a)The SPD should be MOV based, Nominal Voltage 240V AC. b)Surge handling Capacity: 20KA (Nominal) and 40 KA (Maximum) @ Impulse discharge current (8/20) ps c) Protection Level: 1.9KV, Response time: = 25 ns (L-N) and = 100 ns (N-G) d) Max. backup fuse with branch wiring: 125 A (G), Short-circuit current rating: 25 kA 7. The smart rack should have inbuilt fire and smoke sensor/ Multi criteria detector with hooter. 8. The rack should have provision with auto cut-off power supply to the equipment`s installed inside the rack in case the temperature inside the smart rack increase above 40 Deg Celsius and restore the power supply when temperature dip below 40 Deg Celsius.Should have LCD / LED display for temperature inside the rack. 9. The Rack should have 24U Usable space (Approximate 800mm Width x 1000mm Depth) 10. Rack should be provided with Aero Acoustic sheet of minimum 10mm for sound proofing with thermal insulation. Rack structure should be made of 1.2 mm thick CRCA sheet with sides and Rear Fixed panels, welded structure as per requirement. 11. Cable entry provision at bottom and back panel (cable gland shall be used for termination of cables, unused openings shall be sealed properly). Rack should be finished with pre-treated powder coating 12. Copper refrigerant piping from indoor to outdoor unit, stand, Conduit pipe with power copper cable 3 core x 2.50 sq mm as per actual requirement at site. complete in all respect upto the entire satisfaction of the Engineer-in-charge of the work.
SITC of outdoor 2mp Fixed Bullet Camera with STQC Compliance Image Sensor 1/2.7 inch Progressive Scan CMOS or better Resolution Min. 1920 × 1080 at 20 FPS or better Video Compression H.265, H.265 plus , H.264, H.264 plus Audio Compression `G.711ulaw/ G.711alaw/ G.722.1/G.726/ MP2L2/PCM/MP3/ AAC3, Should support Environment Noise Filtering` Streaming Min. three compressed stream (Individually Configurable) ID/Password Multi-level user ID/Password Encryption HTTP(SSL/TLS)/HTTPS Simultaneous Live View Up to 6 channels Physical Layer 1 RJ45 10M/100M self-adaptive Ethernet port Security Password protection, complicated password, HTTPS encryption, IP address filter Protocol TCP/IP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, NTP, UPnP, SMTP, IGMP, 802.1X, QoS, IPv4, IPv6, UDP, Bonjour, SSL/TLS, PPPoE, ARP, SNMP Lens Type Fixed focal lens 2.8/4 mm Alarm 1 inputs, 1 output Image Enhancement BLC, HLC, 3D DNR Image Parameters Switch Yes Image Settings Rotate mode, saturation, brightness, contrast, sharpness, gain, white balance adjustable by client software or web browser Target Cropping Yes Illumination `Colour: 0.005 Lux @ (F2.8, AGC ON), B/W: 0 Lux with IR Inbuilt IR (Up to 30 mtrs. or better)` Privacy Mask Yes Electronic Shutter 1/3 s to 1/100,000 s with slow shutter support Wide Dynamic Range 120dB Day and Night Day, Night, Auto, Schedule Region of Interest (ROI) 1 fixed regions Operating Temperature `-30 °C to plus 60 °C Humidity 95% or less (non-condensing)` Internet protocol Support IPv4 and IPv6 Housing IP66 False alarm Filter Yes Edge based video content Analytics Trip Wire detection, Motion Detection, Video tampering, Power Source 12 VDC, PoE: 802.3at/af. complete in all respect upto the entire satisfaction of the Engineer-in-charge of the work.
SITC of Camera Type PTZ Camera with STQC compliance Image Sensor 1/1.8 inch CMOS or better Resolution 4 MP (2560 × 1440) at 25 FPS or 6K better Video Compression H.265 or better Audio Compression G.711alaw, G.711ulaw, G.722.1, G.726, MP2L2, PCM Streaming Min. Three compressed stream (Individually Configurable) and each stream support Min. 25fps Security User/802.1x Authentication, IP Address filtering, Watermark, HTTPS encryption Protocol IPv4/IPv6, HTTP, HTTPS, 802.1x, QoS, FTP, SMTP, UPnP, SNMP, DNS, DDNS, NTP, RTSP, RTCP, RTP, TCP/IP, UDP, IGMP, ICMP, DHCP, PPPoE, Bonjour Simultaneous Live View Up to 20 channels User Up to 32 users Optical Zoom 32 × Optical Focus Auto Digital Zoom 16x Pan and Tilt Range 360° endless, -15° ~ 90°(auto-flip) Pan and Tilt Speed Pan Manual Speed: 0.1° - 160°/s, Pan Preset Speed: 240°/s Tilt Manual Speed: 0.1° ~ 120°/s Tilt Preset Speed: 200°/s Scan 8 patrols, Min. 32 Presets in each patrol and 4 pattern Number of Preset Min. 300 Dynamic Noise Reduction 3D DNR Defog Support Illumination Colour: 0.005 Lux @ (F1.5, AGC ON), B/W: 0.001 Lux@(F1.5, AGC ON), 0 Lux withIR IR Range Smart IR 200m or better Edge Storage MicroSD/microSDHC/microSDXC slot supporting memory card for min. 256 GB. In the event of failure of connectivity to the network storage the camera shall record video locally on the SD card automatically. After the connectivity is restored these recordings. shall be automatically pulled by the network storage recorder such that no manual intervention is required to transfer the SD card based recordings to network storage. Auto Gain Control Support Back Light Compensation Support High Light Compensation Support Region Of Interest Support Electronic Shutter 1/1 sec ~1/30,000 sec, slow shutter White Balance Auto Wide Dynamic Range 120 dB Support S/N Ratio >52dB Privacy Mask 24 privacy masks programmable Edge based video content Analytics Line crossing detection, Intrusion detection, Unattended baggage detection, Object removal detection, Face detection/capture, Audio exception detection, Region entrance detection, Region exiting detection Smart Tracking Manual tracking, Auto-tracking Day and Night Support ICR Audio Interface 1 input, 1 output Alarm Interface 2 input, 1 output Ethernet Interface 1 RJ45 10M/100M self-adaptive Ethernet port Protection Level IP66/IP67, TVS 6000V Lightning Protection, Surge Protection and Voltage Transient Protection Anti-Vandalism rating IK10 (Excluding glass window) Mounting Bracket Wall/Pole Mount Operating Temperature and Humidity -30°C to 65°C Humidity 90% or less (non-condensing) Power Supply Hi-PoE and 24 VAC complete in all respect upto the entire satisfaction of the Engineer-in-charge of the work.
SITC of NVR Up to 64 Channel with IP video input 64 Ch Incoming bandwidth Min. 380 Mbps Outgoing bandwidth Min. 250 Mbps Recording resolution Up to 12 MP Video o/p interfaces `HDMI / VGA simultaneous output provided HDMI port x 2 nos Supporting 4K (3840 × 2160/60Hz) VGA port x 2 nos Supporting (1920 × 1080/60Hz)` Audio o/p 2 ch, RCA Two-Way Audio Support Decoding format H.265 plus ,H.265,H.264 plus ,H.264 Decoding Capability 32-ch@1080p (30 fps) Synchronous playback Up to 16 channel VCA storage Should support VCA detection alarm is supported Network Protocol TCP/IP, DHCP, IPv4, IPv6, DNS, DDNS, NTP, RTSP, SMTP, SNMP, NFS, iSCSI, UPnP™, HTTP, HTTPS SATA interfaces 8 SATA interfaces with each supporting 16TB eSATA 1 eSATA interface Raid Type RAID0, RAID1, RAID5, RAID6, RAID10. Support global hot spare Serial interface RS-232: RS-485 Network interfaces 2, RJ-45 10/100/1000 Mbps self-adaptive Ethernet interface USB interface Front panel: 2 × USB 2.0: Rear panel: 2 × USB 3.0 Alarm in/out 16/9 Interoperability ONVIF Power supply 100 to 240 VAC, 50 to 60 Hz Intelligent Analytics by NVR Facial Recognition, Perimeter Protection Consumption (without hard disk) = 30 W (without HDD) Working temperature -10 to plus 55° C (14 to 131° F) Working humidity 10 to 90 %. complete in all respect upto the entire satisfaction of the Engineer-in-charge of the work.
SITC of Hard Disk consisting of SATA 10TB Surveillance HDD complete in all respect upto entire satisfaction of Engineer-In- Charge of the work.
SITC of HDMI 1.4 Version, 10.2 Gbps Transmission Bandwidth and 4K @ 30 H- or 4K @ 60H- 4:2:0 Resolution Si-e 10Mtr. complete the job in all respect up to the entire satisfaction of the Engineer-in- charge of the work.
SITC of 55 Inch Led smart Screen Resolution - 3840 x 2160, Crystal processor 4K, Mirroring, Wireless TV On, Brightness 350cd/m2, 24/7, Inbuilt Memory 16 GB, 2GB DDR3 2133Mh- RAM, Android OS Version 9, Built in Google Play store, Screen Mirroring for Android and Windows devices, preinstalled APPs: YouTube, Netflix, etc. HDMI x 3, USB x 2, RJ45 x 1, AV IN x 1, SPDIF Out - Yes Optical, Headphone out, Viewing Angle 178/178 degree, Sound Surround Mode - Yes, Speaker output - 2 x 10W, Rated Power Consumption 150W, Standby Power Consumption 0.5W, Power Supply AC 110V — 240V. complete in all respect upto the entire satisfaction of Engineer - in - charge of the work including making necessary connections etc.
SITC of Workstation with i7 Processor, 16GB RAM, 1 TB HDD, 4GB Graphic, Windows OS or better specs, as recommended by VMS Software. The server shall be suitable for any open platform software, as per STQC Specification complete in all respect upto the entire satisfaction of engineer in charge of the work. Make: HP / Dell / IBM .
SITC of 4MP Vari-focal Bullet Camera for ANPR with STQC Compliance Camera, Image Sensor 1/2.9 inch Progressive CMOS or better Resolution Min. 2560x1440 @ 20 fps Compression H.264,H.265 Streaming Min. three compressed stream (Individually Configurable) ID/Password Multi-level user ID/Password Physical Layer 1 RJ45 10M/100M self-adaptive Ethernet port Protocol Minimum TCP/IP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTSP, NTP, UPnP, SMTP, QoS, IPv4, IPv6, UDP, Bonjour, SSH, Multicast Lens Type 2.7mm to 13.5mm Lens Vari-focal Audio Port 1IN/1OUT Built-in Microphone Yes Dynamic Noise Reduction 3D DNR Antibanding Support Illumination Colour: 0.005 Lux @ (F1.6, AGC ON), B/W: 0 Lux with IR Inbuilt IR IR Range and White Light IR : 50 m Auto Gain Control Yes Back Light Compensation Yes High Light Compensation Yes Electronic Shutter 1/3 s to 1/100,000 s White Balance Yes Wide Dynamic Range 120dB ONVIF Profile S, G, T Video Bit Rate 32 Kbps to 8 Mbps Edge Storage MicroSD/microSDHC/microSDXC slot supporting memory card for min. 512 GB. Day and Night switch Day, Night, Auto, Schedule Region of Interest (ROI) 1 fixed regions Privacy Mask 4 programmable polygon privacy mask Operating Temperature `-30 °C to plus 60 °C Humidity 95% or less (non-condensing)` Housing IP67, IK10 Edge based video content Analytics Line crossing detection, Intrusion detection, Motion Detection, Video tampering, Human and Vehicle Detection General Function Anti-banding, heartbeat, mirror, privacy mask, flash log, password reset via email, pixel counter Power Source 12 VDC, PoE: 802.3at/af. complete in all respect upto the entire satisfaction of the Engineer-in-charge of the work.
SITC of 12 core, 1U, LC OM3, LIU Loaded with Pigtails, Splice tray, 1U height, 19-inch rack mountable. Fiber optic LIU should include with LIU Box itself,. Adapter panel - Cold Steel, 1.5mm Thickness. Rubber fiber slotted bracket built-in, metal splice shelf to protect the fibers. 4 Fiber spools Built-In for 900um tight buffered Fiber Storing. Pigtail: Polishing: Utili-es UPC polishing on the tip to provide high yield during installation. Insertion Loss: Typical: = 0.2dB, Maximum: 0.3dB. Return Loss: = 30dB. Repeatability: = 0.2dB over 200 mating cycles. Connector Type: Ceramic ferrule Connector, Mechanical Transfer Registered Jack (MT-RJ) made of polyphenylene supplied. Transmission Distance: 10Gb/s - 550m, 1Gb/s - 1100m. Minimum Bend Radius: 30mm during installation. Working Temp. -10 deg. C to plus 70 deg. C, Storage Temp. -20 deg. C to plus 70 deg. C. Cable Specifications: Color: Aqua. Lengths available: 1m, 2m, and 3m. Other lengths available upon request. complete in all respect upto the entire satisfaction of the Engineer-in-charge of the work.
SITC of of 1/2 Way MS lighting junction box made up of 16SWG CRCA sheet undergone through various chemical treatment to keep them rust free and duly finished with black powder coated paint in black matt finish and5/15A Anchor or IEC Socket with suitable glands complete in all respect upto the entire satisfaction of the Engineer-in-charge of the work.
SITC of 8-port 10/100/1000 Base-T PoE Smart managed switch with 2 Fiber Uplinks, Physical Interface 8 # 10/100/1000 Mbps Base-T auto-sensing PoE plus ports 2 # 1000 Base-x SFP uplink ports 500MHz single core CPU or higher 128MB RAM, 32MB SPI FLASH Performance Packet buffer memory min. 512K Bandwidth: 20 Gbps full duplex Priority queues 8 Address database size: 8k media access control (MAC) 256 Multicast groups 32 Number of IPv4 static routes 64 VLANs 256 Number of DHCP snooping bindings 11.9 Mpps Packet forwarding rate Up to 10K Jumbo frames Acoustic noise level @ 25° C 0 dBA (fanless) 8 PoE plus ports Network Protocol and Standards IEEE 802.1Q static VLAN (64 groups, static) VLAN Tagging Protocol-based VLANs MAC-based VLANs Auto-VoIP VLAN / Auto-Voice VLAN Other Requirements Broadcast, multicast, unknown unicast , storm control Protected ports Port-based QoS prioritization on power Dynamic Power allocation DSCP-based QoS PoE timer PoE scheduling/timers Web-based configuration Remote/ Cloud managebility Password access control Multi-site, multi-network single pane-of-glass view TACACS plus and RADIUS support Firmware upgradeable through cloud 54V 1.25A external power adapter Environmental Specifications Operating temperature: 0° to 40° Storage temperature: –20° to 70°C Operating humidity: 90% maximum relative humidity, non-condensing Mean time between failures (MTBF): 1,200,041 hrs (137 yrs) Acoustic noise: 0 dB Storage humidity: 95% maximum relative humidity, Status LEDs Per RJ45 port: Link/activity, speed, PoE status Per SFP port: Link/speed Per device: Power, PoE Max Warranty and Support Lifetime hardware replacement warranty Lifetime free latest firmware support Replacement with New Product Only No refurbished Products.
SITC of Wireless Outdoor Access Point. The AP should support 802.11ax with aggregated throughput of 2.8 Gbps.Signal Rate: 5 GH-: Up to 2300 Mbps and 2.4 GH-: Up to 500 Mbps. It should have 1x 1G Gigabit Ethernet (RJ-45) Port (supports IEEE802.3at PoE). It should support Automatic Channel Assignment, Wireless Mac Address Filtering, Beamforming, 16 SSIDs, Reboot Schedule, WPA2, WPA3, 802.1X. Antennas: 2.4 GH-: 2x 4 dBi, 5 GH-: 4x 5 dBi, UL/DL OFDMA support, Transmission Power: (20 dBm(5 GH-, EIRP), IP67, Operating temp. 0 to 70 degree, Operating Humidity: 10—90% RH non-condensing. Certification: CE, FCC, RoHS. complete in all respect upto the entire satisfaction of the Engineer-in- charge of the work.
Supply of Perpetual Channel License for the ANPR camera. complete in all respect upto the entire satisfaction of the Engineer-in-charge of the work.
SITC of Core Switch with 24-port, Fiber 10/1Gbps and 4-Port 25/10/1Gbps Gbps uplinks, Layer-3, Stackable Fully Managed Switch. Should support 24-port fiber SFP plus 10/1Gbps and 4-Port 25Gbps uplinks or higher ready to use. Should support 4P of 25Gbps uplinks ready from day1 or Higher. Should support Redundant modular power supplies Industry standard SNMP, RMON, MIB, LLDP, AAA, sFlow, RSPAN and PTPv2 Should support Mini-USB console port to facilitate ease of use. Or an external convertor module should be supplied Should have built-in USB A port to facilitate upload and download of configuration file via pen drive Should support Minimum Quad-Core Cortex-A57 1.8Ghz 64-bit or higher CPU and 2GB RAM DDR4 Should support minimum of 8 units to be stacked in a single group or an external stacking module should be supplied. Should have Switching fabric more that 680Gbps and Throughput of 505.92 Mpps or higher. Should have min 2000 multicast groups. Should be preconfigured to work with AVoIP devices. Like encoders, decoders, controllers etc. L2 switching, L3 dynamic routing, time sensitive networking, AVB available without license Front to back cooling, always within depth and controlled thermal and acoustics should be present Intelligent fans configurable in Quiet Mode to minimize noise, or Cool Mode to minimize heat for silent operations Efficient authentication tiering with successive DOT1X, MAB and Captive Portal methods for streamlined BYOD should support Switch Mean time between failures (MTBF): 778,741 hours or better Should be capable to configure sFlow=416 samplers, 416 poolers, 8 receivers should support Advanced Layer 2, Layer 3 and Layer 4 feature set or better Should natively support Policy Based Routing, RIP, VRRP, OSPF and PIM or additional license should be supplied. Should support Expedited Leave Function or any other equivalent Should support Multicast streams routing between subnets, VLANs Should Natively support Voice VLAN with SIP, H323 and SCCP protocols detection and LLDP-MED IP phones automatic QoS and VLAN configuration Should have automatic IGMP versions to allow AVoIP devices (TX/Encoders and RX/Decoders) to be connected across multiple switches without lag. Should natively manage broadcast, Multicast and Unicast Network Storm Protection , CPU Protection , DoS attack protection Should be CE mark, commercial, FCC Part 15 Class A, VCCI Class A, Class A C-Tick, Class A EN 55022 (CISPR 22) Class A, EN 50082-1, EN 55024, CSA certified (CSA 22.2 #950), UL listed (UL 1950)/CUL IEC 950/EN 60950 compliant Network management software should be available to manage all the deployed switches in the network without additional charges. Should have ISO certified ODM vendor and certificates should be shared. Should support Lifetime Warranty on hardware of the product. Should support Lifetime firmware upgrade without any charges. Should support replacement with New Product Only, No repair or refurbished Products. complete in all respect upto the entire satisfaction of engineer in charge of the work.
SITC of Sandwich 4Pole Bus Trunking (3Ph 4W system) of Aluminium Busbars with 50% integral G.I. housing as earth, Rated Impulse Withstand Voltage (12KV) Bus Trunking enclosure shall be made of 1.6mm thick G.I. sheet, IP55 for Indoor and IP66 with canopy for Outdoor, multi layer insulation of Class-F, Temperature rise as per IEC 61439 – 1and6 Including 2 runs of external Aluminium Earthing of size 50x6mm complete in all respect upto the entire satisfaction of the Engineer-in-charge of the work. Make :- Simens,abb,schnider and cands 2000A, 50kA SC for 1 sec (IP55 for Indoor) (Straight Length) including Bends and Phase Transposition Unit
SITC of Sandwich 4Pole Bus Trunking (3Ph 4W system) of Aluminium Busbars with 50% integral G.I. housing as earth, Rated Impulse Withstand Voltage (12KV) Bus Trunking enclosure shall be made of 1.6mm thick G.I. sheet, IP55 for Indoor and IP66 with canopy for Outdoor, multi layer insulation of Class-F, Temperature rise as per IEC 61439 – 1and6 Including 2 runs of external Aluminium Earthing of size 50x6mm complete in all respect upto the entire satisfaction of the Engineer-in-charge of the work. (Make :- Simens, abb, schnider and cands) 1250A, 50kA SC for 1 sec (IP55 for Indoor) (Straight Length) including bends and Phase Transposition Unit.
SITC of Sandwich 4Pole Bus Trunking (3Ph 4W system) of Aluminium Busbars with 50% integral G.I. housing as earth, Rated Impulse Withstand Voltage (12KV) Bus Trunking enclosure shall be made of 1.6mm thick G.I. sheet, IP55 for Indoor and IP66 with canopy for Outdoor, multi layer insulation of Class-F, Temperature rise as per IEC 61439 – 1and6 Including 2 runs of external Aluminium Earthing of size 50x6mm complete in all respect upto the entire satisfaction of the Engineer-in-charge of the work. Make :- Simens, Abb, Schnider and CandS. End Connection including End Flange Fabrication Cost (Length of busbar shall be charged extra over and above the straight length), Adopt or box, Copper Flexible and Extension Link (For 2000A, 50kA SC for 1 sec Rating Bus Duct End Connection)
SITC of Sandwich 4Pole Bus Trunking (3Ph 4W system) of Aluminium Busbars with 50% integral G.I. housing as earth, Rated Impulse Withstand Voltage (12KV) Bus Trunking enclosure shall be made of 1.6mm thick G.I. sheet, IP55 for Indoor and IP66 with canopy for Outdoor, multi layer insulation of Class-F, Temperature rise as per IEC 61439 – 1and6 Including 2 runs of external Aluminium Earthing of size 50x6mm complete in all respect upto the entire satisfaction of the Engineer-in-charge of the work. Make :- Simens, Abb, Schnider and CandS End Connection including End Flange Fabrication Cost (Length of busbar shall be charged extra over and above the straight length), Adopt or box, Rubber Bellow, Copper Flexible and Extension Link (For 1250A, 50kA SC for 1 sec Rating Bus Duct End Connection)
SITC of Water mist and CAF(Compressed Air Cylinder) 50 Ltr Capacity Trolley Mounted Fire Extinguisher, Compressed Air Cylinder Material – Carbon Composite PET Liner Cylinder With Grapheme Nano Tube, Air Cylinder Capacity – 6.8 Ltr, Air Cylinder Pressure–300bar,Weight of fully charged Trolley mounted Fire Extinguisher–104kg. complete in all respect upto the entire satisfaction of the Engineer-in-charge of the work.
SITC of Digital Hybrid IP-PBX System configured for 4 Analog Trunk Connectivity , 10 Digital Extensions, 60 Analog Extension , 15 IP Extensions,Concurrent Calling 16 Channels. It should be possible to reach the capacity of system to 240 analog and 999 IP users without any add-on CPU or chassis/hardware platform.It should support maximum 128 IP-TDM calls and 500 IP-IP calls (without transcoding in Relay RTP Mode) as and when required in the future. System should have two Gigabit Ethernet ports for LAN and WAN to separate out local and VoIP traffic on external network.It should be suitable for DTMF as well as the FSK type of telephone instruments. It should have built-in multi-party conferencing without any software licensing. It should be possible to carry out 15 conferences of 3- participants at a time. The system shall have built-in web based software programming tool for system administration. The call ringing sequence would be programmable and have options such as simultaneous, hunting off, round robin and delayed simultaneous.The system shall support flexible numbering for extensions such as it may have extensions with 1 digit, 2 digits and up to 6 digits numbers as well as in combination of all.The system should have built-in outgoing Call Log buffer of 6000 calls, incoming call log buffer of 5000 and call log buffer of 1000 internal calls. Operator features shall have the assistance to extension, attended call transfer, call intercept, indication of call waiting, night service control etc. should be available by default. complete in all respect upto the entire satisfaction of the Engineer-in-charge of the work. Make : Avaya/Alcatel/Matrix
SITC of Operator-cum maintenance console with large Backlit Display of 240x60 Pixels Graphic LCD, 4 Context Sensitive Keys, Built-in 16 DSS Keys, High Quality Full Duplex Speaker Phone Features Call Forward, Waiting, Transfer, Hold, Conference, Redial, Ringer Lamp. Must have storage for minimum 20 calls per call log in the console itself. complete in all respect upto the entire satisfaction of the Engineer-in-charge of the work. Make : Avaya/ Alcatel/ Matrix
SITC of Digital DSS having 32 Direct Keys compatible with the IPBX and its console. With option to add multiple DSS with the console. Phone Features Message wait Lamp, Ringer Lamp. complete in all respect upto the entire satisfaction of the Engineer-in-charge of the work.
SITC of IP PHONE with large Backlit Display of 128 x 64 –pixel Graphical LCD (3.1 Inch),LED for Incoming/Ongoing Call, Mute, Hold, Interface: 2 X RJ45 10/100/1000 Mbps Ethernet Ports, Power Over Ethernet (IEEE 802.3af), Physical Features: 3 Feature Keys : Headset, Mute , Hands-free speaker phone, 4 Context Sensitive Keys, 2 Line keys Function such as navigation, Call Appearance , feature status, Phone Features: Alarms, Auto Answer, Call Forward, Call Hold, Call Transfer, Conference 3-Party, Conference Multiparty, Conference Dial In Conversation Recording , Emergency Conference , Emergency Dialing Last Number Redial , Ringer Lamp, Voice Mail, complete in all respect upto the entire satisfaction of the Engineer-in-charge of the work. Make Avaya/Alcatel/ Matrix
SITC of Caller ID Analog Handset with16 Digit LCD Display, Handsfree Speaker, FSK/DTMF compatible with auto detection, Incoming Call Memory of 99 Nos, Outgoing Call Memory of 18 Nos,6 One Touch Memory Keys. complete in all respect upto the entire satisfaction of the Engineer-in-charge of the work.
SITC of metal enclosure 100 pair mdf with copper crown. complete in all respect upto the entire satisfaction of the Engineer-in-charge of the work.
SITC of premium automatic boom barrier specially designed for high-traffic, secure vehicle entry management at parking lots, gated communities and industrial complexes. Its high-performance motor and robust mechanism support rapid open/close cycles and customizable boom length up to 6 meters. Advanced features include safety sensors for obstacle detection, IP55-rated weatherproof casing, and emergency manual override. integrates seamlessly. Features: - Rebound function in resistance, Quick lifting speed, long remote-control range 30m, Negligible Maintenance, 24V DC Brushless motor, Appearance Dimension 340mm * 272mm * 1000mm, Power Supply 220V ± 10% 50 ~ 60Hz, Voltage AC110V/220V, Motor 24v150w brushless 2-stage variable speed all copper DC motor, Working Environment -15°C ~ plus 70°C, Open Time 6 Sec, Integration Controller, UHF Reader etc. complete in all respect upto the entire satisfaction of the Engineer-in-charge of the work. MAKE:- Time watch / godrej / Neptune
SITC of Powder coated, 2MM CRCA sheet steel enclosed outdoor weatherproof type 11KV H.T. Metering Panel complete with the following:1set of 11/ v3KV / 110/ v3 Volt, 100/75 VA per phase burden and accuracy class 0.5/0.2 S, single phase construction, dry type cast resin PT. 03 Nos. of dual core 50/5A, 15 VA burden, accuracy class CL 0.5/0.2 S plus 5P10, 11 KV cast resin CTs, One Set of Phase Indicating Lamps.2 Sets of HRC fuses with fuse base (H.T. Fuse - 1A and LT fuse 2-6A)., 2 Nos. indoor cable end box suitable for 3C x 240 sq.mm. 11/33 KV, aluminum conductor XLPE Ar. cable (Incoming and Outgoing cable)., 1 No. UHVBN/ DHVBN approved digital Trivector meter with MDI in KVA of accuracy class - 0.5/0.2 S (Accuracy class shall be as per local board), With Sealing, Earthing, Interlock, IP55 Protection, vermin and dust proof mounted on suitable MS Channel, Danger Plate etc. complete in all respect up to the entire satisfaction of Engineer - in - charge of the work including making necessary connections etc. Note: The contractor shall get the Tri vector meter, CTs` and PT tested by UHVBN/ DHVBN and the charges for lesioning for the same will be paid extra. Note: The contractor shall ensure that the above panel meets the requirement as insisted by State/Local authorities (As per UHVBN/ DHVBN) for satisfactory operation and as per the Drawings.
Supply, installation, testing and commissioning of 1250 kVA, 11/0.433KV, 3 phase, 50 Hz plus /-3 Hz, delta/star connected, copper wound, Oil type transformer complete with all fittings and accessories i.e. two earthing Terminal, Air Release Plug, Silica Gel Breather, Oil Conservator with Oil Filling Hole and Drain Plug, Drain cum-Sampling Valve, Explosion Vent with Diaphragm, Radiators, with On Load Tap Changer, with RTCC panel, AVR relay, diagram and rating plate, Buchholz Relay with Alarm and Trip Contacts, winding temperature with Alarm and Trip Contacts, oil temperature indicator with Alarm and Trip Contacts and wiring up to marshalling box, Magnetic Oil Level Gauge lifting lugs, LT Busduct/ cable Box, HT and LT cable Box connection required as per technical specification. Make- Schneider/Kirloskar/CG/Siemens/ABB/Vol tamp/Sudhir Power/Amson transformers/ECE Industries ltd. The Losses of the 1250 KVA transformers shall be as per IS 1180, Level 2. Voltage Ratio: 11/0.433KV Vector Group: Dyn11 Tap Range: 9 Steps, plus 5% to -15% On-Load Tap Changer in Steps of 2.5% with R.T.C.C. and A.V.R. Losses at 50% Load: 1250 KVA: 3220 W or as per latest norms Losses at 100% Load: 1250 KVA: 8400 W or as per latest norms Insulation Class: A Max. Ambient Temperature: 50º C Max. Temperature Rise Oil/ Winding: 40º C/45º C % Impedance at 75º C: 5.0 % Tolerance as per IS Terminal arrangement (HV): Cable Box Terminal arrangement (LV): Busduct/LT Cable Box complete in all respect up to the entire satisfaction of Engineer - in - charge of the work including making necessary connections etc. and with 05 years onsite warranty.
Supply, installation, testing and commissioning of 800 kVA, 11/0.433KV, 3 phase, 50 Hz plus /-3 Hz, delta/star connected, copper wound, Oil type transformer complete with all fittings and accessories i.e. two earthing Terminal, Air Release Plug, Silica Gel Breather, Oil Conservator with Oil Filling Hole and Drain Plug, Drain cum-Sampling Valve, Explosion Vent with Diaphragm, Radiators, with On Load Tap Changer, with RTCC panel, AVR relay, diagram and rating plate, Buchholz Relay with Alarm and Trip Contacts, winding temperature with Alarm and Trip Contacts, oil temperature indicator with Alarm and Trip Contacts and wiring up to marshalling box, Magnetic Oil Level Gauge lifting lugs, LT Busduct/ cable Box, HT and LT cable Box connection required as per technical specification. Make- Schneider/Kirloskar/CG/Siemens/ABB/Vol tamp/Sudhir Power/Amson transformers/ECE Industries ltd. The Losses of the 800 KVA transformers shall be as per IS 1180, Level 2. Voltage Ratio: 11/0.433KV Vector Group: Dyn11 Tap Range: 9 Steps, plus 5% to -15% On-Load Tap Changer in Steps of 2.5% with R.T.C.C. and A.V.R. Losses at 50% Load: 800 KVA: 2147 W or as per latest norms Losses at 100% Load: 800 KVA: 5838 W or as per latest norms Insulation Class: A Max. Ambient Temperature: 50º C Max. Temperature Rise Oil/ Winding: 40º C/45º C % Impedance at 75º C: 5.0 % Tolerance as per IS Terminal arrangement (HV): Cable Box Terminal arrangement (LV): Busduct/LT Cable Box complete in all respect up to the entire satisfaction of Engineer - in - charge of the work including making necessary connections etc. and with 05 years onsite warranty.
APFC Capacitor Panel 420 KVAR (TTA) : Supplying, Installation, Testing and Commissioning of APFC Capacitor Panel, TTA (420 kVAR). A. INCOMER: 1 No. 1000A FP ACB (50KA) having Microprocessor based releases for O/L, S/C and E/F protection. B. METERING and INDICATION: i) 1 set of phases indicating lamps, ii) 1 No. 10 Step-Microprocessor APFC controller/Relay(Dual source purpose) shall continuously monitoring all three phases and LCD displays for various Electrical Parameters like voltage, input current, capacitive current, KVA demand, KW, powder Factor, self-diagnostic error code indication with printout facility of the above with RS 232/RS 485 port. Controller should mount on the front side of the panel. Capacitor bank having 3 phase MPP based mix dielectric low loss ISI marked powder capacitor. (Make- L and T/ Siemens/ Abb/ Schneider or their certified chinned partners/ system integrators as mentioned: - Dhillon Fabricator and Engineers/ Sudhir Power/ Unitech Power system/ Milestones/ Tricolite/ Neptune/ Trisqure).C. BUS-BAR: 1 Set of 1000A TPN Aluminum busbar with color coded PVC Sleeves. D. OUTGOINGS: 3 Nos. of 250A TP MCCB (25 KA) each with ON/OFF Push button and Indicator. 3 Nos. 100 KVAR 7% Detuned Filter AL Wound 440Vac plus 100 KVAR MPP Heavy Duty capacitor 480 Volt, Bank each with capacitor duty contactor. 2 Nos. of 125 A TP MCCB (25 KA) each with ON/OFF Pus button and Indicator. 2 Nos 50 KVAR 7% Detuned Filter AL Wound 440Vac plus. 50 KVAR MPP Heavy Duty capacitor 480 Volt Bank each with capacitor duty contactor. 1 Nos. of 32A TP MCB (10 KA) each with ON/OFF Pus button and Indicator. 1 Nos. 10 KVAR 7% Detuned Filter AL Wound 440Vac plus 10 KVAR MPP Heavy Duty capacitor 480 Volt Bank each with capacitor duty contactor. 2 Nos. of 16A TP MCB (10 KA) each with ON/OFF Pus button and Indicator. 2 Nos.5 KVAR 7% Detuned Filter AL Wound 440Vac plus 5 KVAR MPP Heavy Duty capacitor 480 Volt Bank each with capacitor duty contactor. complete in all respect up to the entire satisfaction of Engineer - in - charge of the work including making necessary connections etc.
APFC Capacitor Panel 270 KVAR (TTA) Supplying, Installation, Testing and Commissioning of APFC Capacitor Panel, TTA (270 kVAR). Detail of Panel: A. INCOMER: 1 No. 800A FP ACB (50KA) having Microprocessor based releases for O/L, S/C and E/F protection. B. METERING and INDICATION i) 1 set of phases indicating lamps, ii) 1 No. 10 Step-Microprocessor APFC controller/Relay (Dual source purpose) shall continuously monitoring all three phases and LCD displays for various Electrical Parameters like voltage, input current, capacitive current, KVA demand, KW, powder Factor, self-diagnostic error code indication with printout facility of the above with RS 232/RS 485 port. Controller should mount on the front side of the panel. Capacitor bank having 3 phase MPP based mix dielectric low loss ISI marked powder capacitor. (Make- L and T/ Siemens/ Abb/ Schneider or their certified chinned partners/ system integrators as mentioned: - Dhillon Fabricator and Engineers/ Sudhir Power/ Unitech Power system/ Milestones/ Tricolite/ Neptune/ Trisqure). C.BUS-BAR: 1 Set of 1000A TPN Aluminum busbar with color coded PVC Sleeves D OUTGOINGS: 1 Nos. of 250A TP MCCB (25 KA) each with ON/OFF Pus button and Indicator. 1 Nos. 100 KVAR 7% Detuned Filter AL Wound 440Vac plus 100 KVAR MPP Heavy Duty capacitor 480 Volt, Bank each with capacitor duty contactor. 3 Nos. of 125 A TP MCCB (25 KA) each with ON/OFF Pus button and Indicator. 3 Nos 50 KVAR 7% Detuned Filter AL Wound 440Vac plus. 50 KVAR MPP Heavy Duty capacitor 480 Volt Bank each with capacitor duty contactor. 1 Nos. of 32A TP MCB (10 KA) each with ON/OFF Pus button and Indicator. 1 Nos. 10 KVAR 7% Detuned Filter AL Wound 440Vac plus 10 KVAR MPP Heavy Duty capacitor 480 Volt Bank each with capacitor duty contactor. 2 Nos. of 16A TP MCB (10 KA) each with ON/OFF Pus button and Indicator. 2 Nos.5 KVAR 7% Detuned Filter AL Wound 440Vac plus 5 KVAR MPP Heavy Duty capacitor 480 Volt Bank each with capacitor duty contactor. complete in all respect up to the entire satisfaction of Engineer - in - charge of the work including making necessary connections etc..
Supply, Installation, Testing and Commissioning of EXTERNAL LIGHTING FEEDER (OUTDOOR TYPE-IP65) with following specification: - A INCOMING: 1 No. of 63A 4P Moulded Circuit Breaker with Ics=Icu=Icw 16KA Thermal Magnetic releases for O/L, S/C and E/F., 1 Nos. 63A 4P Contactor, 1 Set of phases indicating LED lamps, B bus bars: Electrolytic high conductivity Aluminum three phase and neutral bus bars with earthing rated at 100 amps having a maximum current density of 1 amp per sq. mm suitable to with stand symmetrical fault level of 25 kA at 415 volts. The neutral busbar is to be of 100% capacity., C OUTGOING i) 10 Nos.16A 4P MCB (10 KA), i) 10 Nos.16A DP MCB (10 KA), Note: Astronomical timer shall be used for light automation. complete in all respect up to the entire satisfaction of Engineer-in-charge of the work including making necessary connections etc.
SITC of 45-50W Post top with LED 3000K, 4000K, 5700K 240Vac CRI )80 MacAdam step 3 Dimension not less than Ø400 x 807 mm or Ø510 x 935 mm Light Distribution 360° Electronic driver ON/OFF, IP rating IP65/66, Spun aluminum top cover Ø400 mm of 1.6mm thickness, die cast aluminum decorative knob on top, Mild steel ( Sand Blasting with zinc primer supporting arm integrated with die-cast aluminum base suitable for mounting Ø76mm OD pipe. SS fasteners. Pure polyester powder coated process: Acid treatment and pure polyester powder coating. Clear acrylic diffuser with controlled downward light emission. Lamp fixed position. Lumen efficacy should be minimum 120lm/W. This luminaire should contain built-in LED modules. LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), Lifespan of the luminaire L70B10)50,000 hours at 40°C. Operating ambient temperature range is from -15°C to plus 50°C. Driver efficiency )88%, power factor )0.96, THD (10%, Surge protection 6KV .the fixtures proposed must have passed LM 79 and LM- 80, latest Reports will be submitted post the issuance of LOA to the successful bidder and before the supply of material, BIS Certified, test report from NABL certified labs complete in all respect up to the entire satisfaction of Engineer - in - charge of the work including making necessary connections etc.
SITC of Post top Lighting Pole of 4m-4.2m Height made out MS Pipe Ø76.1mm confirming to YSt 210 and facilitating the luminaire mounting at the top. The pole shall be surface mounted on a pre-formed foundation. The base plate of the of the pole shall be E 250 grade MS 200 mm x 200mm, 12mm thick confirming to IS2062:2011 shall be facilitated with elongated slots to suit the 300mm, J-type, M16 bolts, Grade 4.6 that shall be provided with suitable nuts and plain washers. The structurally sound pole emerging out of the base plate shall be architecturally designed with a decorative cast aluminum causeway base cover Ø330mm x 806mm(H) or Ø330mm x 625mm, the grade of pressure die-cast material shall be ADC12. A GDC embellishment is provided at appropriate height enhancing the decorative outlook of the pole. The grade of gravity die cast material shall be LM6. The Pole welding shall be done with certified welders using a V groove technique with a high end MIG welding process. A base compartment with a die cast aluminum door contoured to the polis`s shape housing the gear tray, prewired with 2 way connector The surface preparation of the pole and components shall be done by shot blasting which is environmentally safe eliminating the chemical and acid use and ensuring the thorough removal of impurities like, rust, oxides and other unwanted particles from the surface for high standard coating. The surface finish of the pole shall be Zilch rich primer coat and pure polyester powder coating or epoxy zinc phosphate primer followed by the environmentally stable Polyurethane based paint. Any other wiring/electrical consumables shall be under the scope of purchaser complete in all respect up to the entire satisfaction of Engineer - in - charge of the work including making necessary connections etc.
SITC of 12W square decorative Leser cut designer bollard LED 3000K, 4000K, 6500K 230-240Vac CRI )80 MacAdam step-3 Height 910mm Light Distribution Symmetrical, Electronic driver ON/OFF LUMINAIRE TYPE Bollard. IP rating IP66, Extruded square aluminum tube (grade 6063 with test certificate) Sq. 150 x 3mm thickness. Should have Bespoke laser cutting design options. SS fasteners. Must be equipped with Pretreated epdm black gaskets. Should have Die-cast aluminum mounting plate Sq.150 x 4mm thick with 3 elongated holes 20 x 12 to suit M10 bolts at PCD 90 with pure polyester powder coating. This mounting plate along with foundation bolts of suitable size to be used for ensuring firm grouting into the specially designed foundation. Hot dip galvanized foundation bolt. Mechanical resistance IK06. It should be Pure polyester powder coated process: Acid treatment and pure polyester powder coating. Optical grade clear toughened glass diffuser of 4mm thickness with controlled downward light emission. Lamp fixed position. This luminaire should contain built-in IP 65 LED modules. LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), Lifespan of the luminaire) 60,000 hours at 40°C. Operating ambient temperature range is from -15°C to plus 50°C. Driver efficiency )85%, power factor )0.9, THD (10%, Surge protection 2.5KV. BIS Certified, test report from NABL certified labs complete in all respect up to the entire satisfaction of Engineer - in - charge of the work including making necessary connections etc.
Please Enable Macros to View BoQ information
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.27 MB
BOQ_573082.xls
BOQ • 0.50 MB
1YBA99Z145051.pdf
Additional Documents • 4.88 MB
OT0145051.pdf
Other Document • 0.61 MB
Download all tender documents and submit your bid