REPAIR/MAINT TO FLOORING, ROOFING, JOINERY, CEILINGS, INCLUDING SANITARY FITTINGS AND REPAIR/REPLACEMENT/CLEANING OF SEWAGE LINE, MANHOLES, SEPTIC TANK, SOAK WELL INCL CLEANING OF DRAIN AND MISC WORKS AND PERIODICAL SERVICES TO MANASBAL UNDER GE

Amount

Taking down chowkhat with shutters (without taking off shutters from the frame) exceeding 1.50 Sqm but not exceeding 4 Sqm each, complete all as specified and directed.

Taking down chowkhat with shutters (without taking off shutters from the frame) not exceeding 1.50 Sqm each, complete all as specified and directed.

Taking down shutter of any description exceeding 1 Sqm and not exceeding 2 Sqm each and refixing in same opening by making good, complete all as specified and directed.

Taking down shutters of any description not exceeding 1 Sqm each, complete all as specified and directed.

S&F powder coated ( thickness of powder coating not less than 50 micron) Anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc, complete all as specified and directed.

S&F powder coated ( thickness of powder coating not less than 50 micron) Anodised aluminium door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handels 2 Nos in each door, hinges, anodised alumnium snap beading, screws etc, complete all as specified and directed.

S&F powder coated ( thickness of powder coating not less than 50 micron) Anodised aluminium window & ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised alumnium snap beading, screws anodised aluminium fittings such as peg stays 150mm long, hinge type B-21 100mm long, suitable handle, complete all as specified and directed.

S&F powder coated ( thickness of powder coating not less than 50 micron) Anodised aluminium window & ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (1 no.), complete all as specified and directed.

S&F for Anodised aluminium grill (anodised transparent or dyed to required shade according to IS : 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening all complete as per requirement, complete all as specified and directed.

S&F Sheet glass 4.8mm thick, ordinary quality & glazing with oil putty in square not exceeding 0.5 sq.m in each pane including hacking out old broken glass (any thicknesss, size,quality or description) from metal frame inlcuding punching or drilling out old glazing pins/spring clips & providing & fixing new ones all complete as per requiremen , complete all as specified and directed.

S&F Sheet glass 4.8mm thick, ordinary quality & glazing with oil putty in square exc 0.5 sq.m in each pane including hacking out old broken glass (any thicknesss, size,quality or description) from metal frame inlcuding punching or drilling out old glazing pins/spring clips & providing & fixing new ones all complete as per requirement, complete all as specified and directed.

S&F Figured glass 4.0mm thick, pin head type & glazing with oil putty in squares n exc 0.5 sq.m in each pane, complete all as specified and directed.

S&F in Galvanised mild steel wire cloth, 0.56 nominal dia of wire & average width of aperture 1.18mm with tinned tacks, or galvanised wire staples, complete all as specified and directed.

S&F 2nd class hardwood plain , solid , straight chowkhat and frames , wrought , framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints in 2nd class Hard wood, complete all as specified and directed.

M&L for Pressed steel frames for doors size 105x60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, complete all as specified and directed.

S&F factory made 35 mm thick 2nd class Hard Wood of plain framed panelled shutter ( two panels) with panels of timber flat on both sides feather edged), or of veneered particle board medium density or particle board with commercial face, complete all as specified and directed.

S&F 35mm thick 2nd class soft wood for Glazed skeleton shutters for door open rebated and prepared to receive glass gauge etc. (with sash bars) edges of framing plain, chamfered or rounded , fitted with cuts and mitred beads for securing glass etc. size of members of shutter as specified in SSR Part- I section -8 clause 8.23 (a), complete all as specified and directed.

S&F 30mm thick 2nd class soft wood for Glazed skeleton shutters for door open rebated and prepared to receive glass gauge etc. (with sash bars) edges of framing plain, chamfered or rounded , fitted with cuts and mitred beads for securing glass etc. size of members of shutter as specified in SSR Part- I section -8 clause 8.23 (b), complete all as specified and directed.

S&F for Factory made solid PVC door frame of size 50 x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube , complete all as specified and directed.

S&F for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and directed.

S&F 200 mm long aluminium tower bolt, complete all as specified and directed.

S&F 100 mm long aluminium tower bolt, complete all as specified and directed.

S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy, complete all as specified and directed.

S&F 75 mm size MS butt hinges medium wt. of cold rolled, complete all as specified and directed.

S&F 125 mm size MS butt hinges medium wt. of cold rolled, complete all as specified and directed.

S&F for Aluminium handles, cast type anodised150mm size, complete all as specified and directed.

S&F for Aluminium handles, cast type anodised 125mm size, complete all as specified and directed.

S&F for Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, with glazing bars, complete all as specified and directed.

S&F for Steel ventilators with top hung shutter including hinges, steel peg stay, complete all as specified and directed.

S&F for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165, complete all as specified and directed.

S&F in repairs mild steel wire cloth galvanized 0.56mm normal dia of wire and average width of aperture 1.18mm, complete all as specified and directed.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in squares n exc. 0.50 Sqm in each panes, complete all as specified and directed.

S&F in repairs 3mm thick sheet glass ordinary quality and glazing with oil putty in square n exc. 0.5 Sqm in each pane including hacking out of glass panes, complete all as specified and directed.

S&F MS Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for largegates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165, complete all as specified and directed.

M&L for PCC 1:3:6 type C1 using 20 mm graded crushed stone aggregate as in hold fasts, complete all as specified and directed.

S&F in repair 2nd class Hard Wood Plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads cross sectional area exceeding 13 sqcm and not exceeding 25 Sqcm , complete all as specified and directed.

M & L for 6mm veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face decrorative veneer and one face plain of required texture & colour fixed with nails to timber frame work for any surface with and including dismantling wall and ceiling boards of an description, complete all as specified and directed.

S&F 18/19 mm thick block boards, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work including dismantling boarding any descritption, complete all as specified and directed.

S&F for hasp and staple 150 mm size, safety type aluminium anodised with mild steel hinge pin including bolt to hinge plate, fixed with screws in repair, complete all as specified and directed.

S&F in repair mild steel 300mm long, ordinary rat tail rod pattern springs including roller and roller plate, complete all as specified and directed.

S&F in repair harrison curtain rails of anodised alluminium alloy with fixing brackets, stops rollers etc, complete all as specified and directed.

S&F in repairs Door closer aluminium (extruded section body) hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed, complete all as specified and directed.

S&F in repairs brass mortice lock, 4 levers, vertical type, size 100 mm of , complete all as specified and directed.

M&L for Preparing new surfaces of wood and wood based materials of any description over 10 cm in width or girth and applying two coat of synthetic enamel paint over a coat of pink primer , complete all as specified and directed.

M&L for Preparing new steel & iron surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide /zinc chrome primer , complete all as specified and directed.

M&L for Preparing new steel & iron surfaces plain or moulded, not exceeding 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of priming paints plaster coat when unconnected with other painting or when painted in a different tint, complete all as specified and directed.

Taking up or down steel tubing and connections, 15mm bore including cleaning for refixing or removal to store complete all as specified and as directed.

Taking up or down steel tubing and connections, 20mm bore including cleaning for refixing or removal to store complete all as specified and as directed.

M&L Lagging to pipes used in internal water supply or plumbing all round with, 25mm thick bonded mineral wool pre-formed mineral wool pre-formed `SNAP ON' pipe secions of density 144 Kg/cum conforming to IS 9842 on pipe of internal dia 20 mm complete all as specified and directed.

M&L 16mm outer dia for 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and directed.

M&L 20mm outer dia for 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and directed.

Cutting chases, pinning in brickwork and making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and paving not exceeding 15 cm thickness (below or above ground level) , complete all as specified and directed.

M&L for 25mm thick cement concrete 1:2:4 type B-0 using 12.5 mm graded stone aggregate in leveling course, benching etc, finished even & rough to receive cement mortar screed bed , complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding but not backing, removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

M&L Non skid ceramic coloured tiles 8 to 10 mm thick (Square/rectrangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18sqm, in floors etc over and including 15 mm thick cement screed bed in CM 1:6. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

Description all as per item 56 above but as on vertical surface such as skirting, dados and risers over and including 10mm thick rendering/backing coat in CM 1:4 including taking down plaster complete all as specified and directed.

M&L colour glazed ceramic coloured tiles in vertical surface 350X250X7mm/450x350x7mm thick over and including 10 mm thick rendering/backing coat in CM 1:4 and set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed.

S&F light shade vitrified Ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed in CM(1:4), complete all as specified and directed.

Description as per item 59 above but as on vertical surface such as skirting, dados and risers over and including 10mm thick backing coat in CM 1:4 including taking down plaster complete all as specified and directed.

M&L Granite (of any type) tiles 20mm thick machine cut, bedded & jointed with grey cement slurry & pointed with white cement with admixure of pigment to match the shade of granite stone including cutting & polishing over 15mm thick screed in CM(1:4), complete all as specified and directed.

Description as per item No 61 above but as on vertical surface such as skirting, dados and risers over and including 10mm thick backing coat in CM 1:4 including taking down plaster complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar sitution, complete all as specified and directed.

Dismantling wall and ceiling board (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.

S&F in repairs anodised aluminium snap grid frame work for false ceiling all as specified size of Grid 605 x 605mm, complete all as specified and directed.

M&L for providing & fixing Gypsum board 12mm thick in ceiling fixed with screw as per manufacturers instructions complete all as specified and directed.

S&F 5 mm thick PVC sheet fillet of width 35mm for all paneling inclusive of fixing on to wall to make PVC frame as per specification and drawing complete all as specified and directed.

S&F solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solven cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed.

M&L for wooden laminated flooring in strips of size120cm long , 20cm wide and 6-8 mm thick, fixed with PVC sheet and cushion (thermocol sheet) complete all as per manufacturer's instructions including dismantling existing flooring, complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including nsinital or similar pattern roof coverings, complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall , fixed with self screws or 'J'/'L' hook, complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screwes or 'J'/'L' hook, complete all as specified and directed.

M&L for bird proofing net (fishing net of PVC/Nylon) of superior quality of wire mesh of size not exceeding 25 x 25mm including stiching of ends longtudinal/transverse sides & for PVC rope holding with cotton clothes at both faces of net PVC/Nylon rope to be fixed at both end face of steel portal complete all as specified and directed.

Demolition of brick work built in cement or cement lime mortar, complete all as specified and directed.

M&L for brick work with sub class ‘B’ old size bricks, straight or curved on plan exceeding 6 m mean radius, built in cement mortar 1:6 , complete all as specified and directed.

M&L for brick work with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4, complete all as specified and directed.

M&L for cleaning of SGSW / RCC / PVC sewage line upto 250mm dia by rodding / auger rods & drain pipe machine as required from manhole to manhole including gully trap and getting out the sludge from any size of manholes & gully traps before & after cleaning process of SGSW / RCC / PVC sewage line and well flushing using clean water through water bowser pipe of any capacity (arranged by the Contractor) and removing the sludge etc to a distance n.exc 250m and burying the same underground by digging pit of suitable size from habitant area and returning & filling with excavated materials upto ground level including removal of surplus soil to a distance n. exc 250m with and including taking off manholes / gully trap covers and re-fixing the same after cleaning process, complete all as specified and directed. Note : 1. The Contractor / site supervisor will attend the complaint cell of AGE B&R-III to receive the complaint slips daily at 0900hrs to carry out the complaints and completion report will be submitted to concerned JE / AGE in the same day i.e. before 1700hrs. 2. If Contractor is to be failed to carry out to completion the jobs within the stipulated time period, the recovery will be chargeable at the rate of Rs. 75.00 per RM for every day.

M&L for cleaning / taking off of sludge (solid / semi solid) of any state from manhole of any size including gully trap having depth upto 3.00m by using machinary or manually as required and removing the same to a distance n.exc 250m and burying the same underground by digging pit of suatible size from habbatient area and returning & filling with excavated materials upto ground level including removal of surplus soil to a distance 250m with and includig taking off manholes / gully trap covers and re-fixing the same after cleaning process, complete all as specified and directed. Note : 1. The Contractor / site supervisor will attend the complaint cell of AGE B&R-III to receive the complaint slips daily at 0900hrs to carry out the complaints and completion report will be submitted to concerned JE / AGE in the same day i.e. before 1700hrs. 2. If Contractor is to be failed to carry out to completion the jobs within the stipulated time period, the recovery will be chargeable at the rate of Rs. 165.00 per Each Job for every day.

M&L for opening / cleaning of blocked WC of any type, traps and CI / PVC drain pipe including fittings (i.e. access door bends / tee etc) of any size at any floor & position with and including taking down of CI / CP / PVC grating and refixing the same at position with appropriate materials / fittings i.e. white cement, solvent, nuts & bolts etc and well flushing, pressure pumping, taking out all residue materials etc and removing the same to distance not exc 250 mtr, burried the same underground by digging pit of suatible size from habbatient area and covering same wrt the earth level including removal of surplus soil to a distance 250m, , complete all as specified and directed. Note : 1. The Contractor / site supervisor will attend the complaint cell of AGE B&R-III to receive the complaint slips daily at 0900hrs to carry out the complaints and completion report will be submitted to concerned JE / AGE in the same day i.e. before 1700hrs. 2. If Contractor is to be failed to carry out to completion the jobs within the stipulated time period, the recovery will be chargeable at the rate of Rs. 65.00 per Each Job for every day.

M&L for dewatering of contaminated waste effluent from septic tank, soakage well of any capacity by sewer jetting cum suction machine vehicle / honey sucker machine vehicle from any location and disposal to suitable place i.e. authorised civil location with and including taking off & re-fixing manholes covers etc, complete all as specified and directed. Note : 1. The Contractor / site supervisor will attend the complaint cell of AGE B&R-III to receive the complaint slips daily at 0900hrs to carry out the complaints within 48 hrs from receipt of compalints slip and completion report will be submitted to concerned JE / AGE before 48hrs as per complaint slip time. 2. If Contractor is to be failed to carry out to completion the jobs within the stipulated time period, the recovery will be chargeable at the rate of Rs. 730.00 per Cum for every day.

M&L for cleaning of septic tank of any capacity and depth including inlet / outlet chamber after mixing of contaminated waste effluent and sludge etc of septic tank by mixing machine to change the state of solid / semi solid sludge to liquid state by using extra water provided by the Contractor if required and getting out through sewer jetting cum suction machine vehicle / Honey sucker machine vehicle from any location and disposal to suitable place i.e. authorised civil location with and including taking off & re-fixing manholes covers etc , complete all as specified and directed. Note : 1. The Contractor / site supervisor will attend the complaint cell of AGE B&R-III to receive the complaint slips daily at 0900hrs to carry out the complaints within 48 hrs from receipt of compalints slip and completion report will be submitted to concerned JE / AGE before 48hrs as per complaint slip time. 2. If Contractor is to be failed to carry out to completion the jobs within the stipulated time period, the recovery will be chargeable at the rate of Rs. 1000.00 per Cum for every day.

Cleaning blockages from Nahani trap/Gully trap/water closet/WHB/sink by Roding etc and cleaning the sludge/soil pipe by removing the acess door cover in the bend and refixing it after cleaning, pouring water until smooth flow and from NT taking up and refixing the grating in CM (1:3) including testing by pouring the water until smooth flow, complete all as specified and directed. Note:- Each time cleaning of blockage shall be paid and measured seperately.

M&L for excavation in trenches not exceeding 1.5m wide and n.exc 1.5m in depth for foundation etc or for shaft,wells,cesspits,manholes,sewage line,pier holes not exceeding 10 Sqm on plan and not exceeding 1.5m in depth and getting out in any type of soil, complete all as specified and directed.

Demolition and breaking up existing sewage (SGSW/AC/PVC pipes and the like, 150 mm bore set in cement mortar and removing demolished material to a distance exceeding 50m and not exceeding 100 m, complete all as specified and directed.

M&L for cement concrete 1:3:6 type C-2 bed to drain pipes including packing under and launching against the sides of pipes after they are laid and tested in 150 mm bore of pipe complete all as specified and as directed.

M&L reinforced concrete pipes 150mm dia, class NP2, laid & jointed complete with collars, complete all as specified and directed.

Demolition of cement concrete of any description and in any position not other wise specified, complete all as specified and directed.

M&L PCC (1:4:8) type C2 in foundations, filling and mass concrete to sub base of manholes etc alongwith demolition, complete all as specified and directed.

M&L for brick work in repairs with sub class ‘B’ old size bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 incl demolition of brick work in any mortar complete all as specified and directed.

M&L PCC (1:2:4) type B1 as in coping, haunching and benching and other similar work (location) with weathering slightly rounded edges and throating etc as required with and incl all necessary form work all as specified and directed by Engr-in-Charge.

M&L rendering 10mm thick in CM (1:4) mixed with liquid WPC as per manufacturers instruction to concrete surface finished even and smooth w/o using extra cement., complete all as specified and directed.

Supply only liquid Water Proofing Admixture @ 200 ml/50 Kg of cement, complete all as specified and directed.

Returning, filling in soil, including spreading,levelling ,watering and well ramming in layers not exceeding 25 cm thick each layer as in soil, complete all as specified and directed.

Removal of excavated incl material (Soil) to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.50m above the starting poin, complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories, complete all as specified and directed.

S&F PVC (SWR) pipe single socketed, in any length with rubber ring joints, laid in tranches or in floors or wall (110mm bore) , complete all as specified and directed.

S&F PVC (SWR) pipe single socketed, in any length with rubber ring joints, laid in tranches or in floors or wall (75mm bore) , complete all as specified and directed.

S&F PVC (SWR) pipe single socketed, in any length with rubber ring joints, laid in tranches or in floors or wall (50mm bore) , complete all as specified and directed.

S&F PVC (SWR) bend 110mm dia any radius all as specified, complete all as specified and directed.

S&F PVC (SWR) bend 75mm dia any radius, complete all as specified and directed.

S&F PVC (SWR) branch piece, single (single Y) equal or unequal 75 mm dia, complete all as specified and directed.

S&F PVC (SWR) junction single (single T) equal or unequal (75mm dia), complete all as specified and directed.

S&F PVC (SWR) junction single (single T) equal or unequal (110mm dia), complete all as specified and directed.

S&F PVC (SWR) vent cowl 75mm dia, complete all as specified and directed.

S&F stack clamps for 100/110 mm bore of pipe made out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof etc, complete all as specified and directed.

S&F stack clamps for 75 mm bore of pipe made out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof, complete all as specified and directed.

M&L for 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement, complete all as specified and directed.

M&L for 75mm dia PVC (SWR) multi floor trap, plain with grating including jointing with solvent cement, complete all as specified and directed.

S&F in repair rotational moulded HDPE water storage tanks (cylindrical vertical with closed top) of 500 litres capacity, ISI marked, double layered hoisted and fixed in position including connecting up pipes including provision of 20mm bore brass body ball valves, high pressure and 25mm bore gun metal gate or globe valve with iron wheel head screwed both ends for iron pipe, and dismantling of existing water tank, complete all as specified and directed.

S&F in repair rotational moulded HDPE water storage tanks (cylindrical vertical with closed top) of 1000 litres capacity, ISI marked, double layered hoisted and fixed in position including connecting up pipes including provision of 20mm bore brass body ball valves, high pressure and 25mm bore gun metal gate or globe valve with iron wheel head screwed both ends for iron pipe, and dismantling of existing water tank, complete all as specified and directed.

S&F in repair 20mm bore ball brass valves, high pressure with polythene float and flynut complete screwed for iron pipe or brass ferrule and fixed, complete all as specified and directed.

S&F in repair PVC low level flushing cistern 10 litres capacity, white, with all fitting and fixtures including brackets and 32 mm bore PVC flush pipe 600mm long, fixed in repair complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc complete all as specified and directed.

S&F vitreous China squatting pan, ‘Orissa’ pattern, of size 580 mm x 440 mm white with integral foot rest complete including provn of plain cement concrete 1:5:10, type E-1 (using 20 mm graded crushed stone aggregate ) bedding, connection to trap, outgoing flushing pipe, anti sypohonage pipe,100 mm bore 'P' or 'S' of pipe etc, fixed in repair, complete all as specified and directed.

S & F in repair vitreous China wash hand basin white flat back of size 550 mmx400mm fixed on and fixing of cantilever brackets of mild steel angle 35 mm x 35 mm x 5 mm, 32mm dia brass waste coupling and 32 mm dia PVC waste pipe (rigid quality) including fixing of tap etc. complete all as specified and directed.

S&F in repair stop valves, 15 mm bore, fancy type, chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repair gun metal 20mm bore globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repair pillar tap cast copper alloy with capstin heads chromimium plated fancy type screwed down high pressure with or without lettered hot or cold with long screwed shank and fly nuts, screwed for iron pipe 15 mm bore, complete all as specified and directed.

S&F for grating doom 100 mm dia of PTMT (minimum weight 25 gms) , complete all as specified and directed.

S&F in repair brass chromium plated shower rose 65mm to 90 mm size with swivel joints, complete all as specified and directed.

S& F in repair PVC connections 15 mm, 600 mm length with PTMT nuts at both ends complete all as specified and directed.

S&F in repair bib taps long body cast copper alloy chromium plated with capstan head screwed down, screwed for iron pipe or for brass ferrule 15 mm bore of approved make complete all as specified and directed.

S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect, complete all as specified and directed.

S&F in repairs brass chromium plated wall mixer for mixing Hot & cold water , high pressure, screwed down for 15 mm bore iron pipe fixedcomplete all as specified and directed.

S&F in repair Pillar brass CP mixer for mixing hot & cold water screwed , chromium plated, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipes fixed in repairs, complete all as specified and directed.

S&F in repairs plastic water closet seat, black, closed pattern with flat bottom, & cover & mild steel CP or aluminised hinging device, complete all as specified and directed.

M&L for preparing old decorated plastered surfaces of wall including cornices,pilastered etc. by brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and applying one coat of cement base paint on wall surface complete all as specified and directed.

M&L for preparing old decorated plastered surfaces of wall including cornices,pilastered etc. by brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and applying one coat of oil bound distemper on wall surface (approved colour/ shade) complete all as specified and directed.

M&L for complete removal of existing treatment from walls (any number of layers) by scrapping with steel scrappers or any other means, including filling depressions of scrapped surfaces and applying two coats of oil bound distemper over and including a coat of suitable primer and 3mm thick wall care putty including preparation of surfaces, complete all as specified and directed. Note: The time difference between one coat and two coat, complete all as specified and directed.

M&L for complete removal of existing treatment from ceiling (any number of layers) by scrapping with steel scrappers or any other means, including filling depressions of scrapped surfaces and applying two coats of oil bound distemper over and including a coat of suitable primer, preparation of surfaces, complete all as specified and directed. Note: The time difference between one coat and two coa, complete all as specified and directed.

M & L for complete removal of existing treatment and applying two coats exterior emulsion weather proof paint over one coat of exterior wall primer incl. preparation of surfaces of old decorated walls etc, properly making of v shape crakes and filling of all crakes with crakes seal of walls, complete all as specified and directed.

M&L for preparation of old wood and wood based materials surfaces of any description, over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old steel surfaces of any description, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for applying one coat of synthetic enamel paint on steel & iron surfaces of any description, n exc 10cm width or girth when unconnected with other painting or when painted in different tint including preparation of old painted surface, complete all as specified and directed.

Taking down cement or cement lime plaster, any description, on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

M&L for rendering 10 mm thick in cement mortar 1:6 on faces of brick work or concrete surfaces, finished even and smooth without using extra cement, complete all as specified and directed.

M&L for rendering 5 mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished fair & even , complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:4 on faces of brick work or concrete surfaces, mixed with water proofing compound @ 2% by weight of cement, finished fair and even complete all as specified and directed.

M&L for finishing walls with Acrylic smooth exterior paint of required shade in new work (two coats applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @2.20 kg/10 sqm) complete all as specified and directed.

M&L for preparing new plastered or unplastered surfaces of walls and applying two coats of oil bound distemper in approved colour/shade over a coat of chalk whiting primer after preparation of surfaces complete all as specified and directed.

M&L for preparing new plastered or unplastered surfaces of ceiling and applying two coats of oil bound distemper in approved colour/shade over a coat of chalk whiting primer after preparation of surfaces complete all as specified and as directed.

M&L for synthetic enamel paint in lables, etc n.exc. 0.1 sqm each, including cutting in edge complete all as specified and directed.

M/S RAFIQ AHMAD SOFI AND SONS (BID ID -3107294)

G N Constructions (BID ID -3122126)

PARVAIZ AHMAD WANI (BID ID -3108210)

rafiq trading co (BID ID -3108630)