Interior and Renovation Work for the office of SIDBI at THANE-MUMBAI

Name of Work : Interior and Renovation Work for the office of SIDBI at THANE

DETAILED SUMMARY

S.No. Sub-Head NDSR Amount (in Rs.)

1 Civil & Interior Works 10,51,391.70 24,16,267.27

3 Electrical/FA/PA 9,16,480.00 8,06,607.45

6 Furniture Work 0.00 29,71,170.00

9 TOTAL i/c GST 99,64,825.00

Digitally signed by AMIT

Civil & Interior Works

S No. Description Unit Rate

Non DSR Total Qty DSR Amount NDS Amount

CIVIL AND INTERIOR

1 PARTITIONS AND WALL CLADDING - -

WALL PANELING :-Providing and fixing Paneling upto ceiling height

consisting of Aluminium frame and required board, frame work made of

Aluminium section made of 50x25 mm , consisting of floor and ceiling

channel 50mm wide having equal flanges of 25 mm and 0.50 mm thick,

fixed to the floor and ceiling at the spacing of 610 mm centre to centre

with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor

fastener or metal screws with nylon plugs and the studs 48 mm wide

having one flange of 34 mm and other flange 36 mm and 0.50 mm thick

fixed vertically within flanges of floor and ceiling channel and placed at a

spacing of 610 mm centre to centre by 6 mm dia bolts and nuts,

including fixing of studs along both ends of partition fixed flush to wall with

suitable anchor fastener or metal screws with nylon plugs at spacing of

450 mm centre to centre, and fixing of boards to both side of frame work

by 25 mm long dry wall screws on studs, floor and ceiling channels at the

spacing of 300 mm centre to centre. The boards are to be fixed to the

frame work with joints staggered to avoid through cracks, M.S. fixing

channel of 99 mm width (0.9 mm thick having two flanges of 9.5 mm

each) to be provided at the horizontal joints of two boards, fixed to the

studs using metal to metal flat head screws, including jointing and

finishing to a flush finish with recommended jointing compound, jointing

tape, angle beads at corners (25 mm x 25 mm x 0.5 mm), joint finisher as

per manufacture's specification and direction of engineer in charge all

complete.(Cost of Aluminium framing 600X600mm Paid saperately)

Paneling with 12 mm thick HDHMR board to IS: 5509

Digitally signed by AMIT

S No. Description Unit Rate

Non DSR Total Qty DSR Amount NDS Amount

WALL PARTITION-Providing and fixing partition upto ceiling height

consisting of Aluminium frame and required board, frame work made of

Aluminium section made of 50x25 mm , consisting of floor and ceiling

channel 50mm wide having equal flanges of 25 mm and 0.50 mm thick,

fixed to the floor and ceiling at the spacing of 610 mm centre to centre

with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor

fastener or metal screws with nylon plugs and the studs 48 mm wide

having one flange of 34 mm and other flange 36 mm and 0.50 mm thick

fixed vertically within flanges of floor and ceiling channel and placed at a

spacing of 610 mm centre to centre by 6 mm dia bolts and nuts,

including fixing of studs along both ends of partition fixed flush to wall with

suitable anchor fastener or metal screws with nylon plugs at spacing of

450 mm centre to centre, and fixing of boards to both side of frame work

by 25 mm long dry wall screws on studs, floor and ceiling channels at the

spacing of 300 mm centre to centre. The boards are to be fixed to the

frame work with joints staggered to avoid through cracks, M.S. fixing

channel of 99 mm width (0.9 mm thick having two flanges of 9.5 mm

each) to be provided at the horizontal joints of two boards, fixed to the

studs using metal to metal flat head screws, including jointing and

finishing to a flush finish with recommended jointing compound, jointing

tape, angle beads at corners (25 mm x 25 mm x 0.5 mm), joint finisher as

per manufacture's specification and direction of engineer in charge all

complete.(Cost of Aluminium framing 600X600mm Paid saperately)

Both side 12 mm thick HDHMR board to IS: 5509 SQM 3,850.00 125.00 4,81,250.00

Providing & Fixing decorative high pressure laminated sheet of plain /

wood grain in gloss / matt/ suede finish with high density protective

1.3 9.127 surface layer and reverse side of adhesive bonding quality conforming to - -

IS : 2046 Type S, including cost of adhesive of approved quality.

Providing and fixing framedglass door/glass partition wherever required

1.4 MR 12 mm thickness including all fittings, frames etc. as per direction of EIC( sqm 9,355.08 20.00 1,87,101.52

Floor spring lock and handle paid seprately)

Providing wood work in frames of doors, windows, clerestory windows and

other frames, wrought framed and fixed in position with hold fast lugs or

1.5 9.1 with dash fasteners of required dia & length (hold fast lugs or dash - -

fastener shall be paid for separately).

9.1.1 Second class teak wood cum 1,42,949.70 0.50 71,474.85

Digitally signed by AMIT

S No. Description Unit Rate

Non DSR Total Qty DSR Amount NDS Amount

INSULATION- Providing and fixing thermal insulation with Resin Bonded

rock wool conforming to IS: 8183, having density 48 kg/m3,50 mm

1.6 12.62 thick,wrapped in 200 G Virgin Polythene Bags fixed to wall wirh screw, SQM 322.50 80.00 25,800.00

rawel plug & washers and held and in position by criss cossing GI wire etc.

complete as per directions of Engineer-in-Charge.

Providing and fixing ISI marked flush door shutters conforming to IS : 2202

(Part I) non-decorative type, core of block board construction with frame

1.70 9.21 of 1st class hard wood and well matched commercial 3 ply veneering - -

with vertical grains or cross bands and face veneers on both faces of

35 mm thick including ISI marked Stainless Steel butt hinges with necessary

Providing and fixing aluminium extruded section body tubular type

universal HS 3000 Slimline Concealed Door Closer (having brand logo with

ISi, IS : 3564,embossed on the body, door weight upto 36 kg to 80 kg and

1.80 MR door widthfrom 701 mm to 1000 mm), with double speed adjustment with each 7,200.02 3.00 21,600.07

necessary accessories and screws etc. complete

TOWER BOLTS:- Providing and fixing aluminium tower bolts, ISI

1.90 9.97 marked, anodised (anodic AC 10 as per IS : 1868 ), transparent or dyed to - -

required colour or shade, complete:

DOOR STOPPER:- Providing and fixing bright finished brass hanging type

stopper with necessary screws, etc. complete.

MORTICE LOCK AND LEVER HANDLES- Providing and installing Tubular

Handle TH 123 with Roses & Escutcheon in SS packaged with Mortice

1.11 MR lockset 55mm backset, 20 SS forend, SS strike plate and EP Cylinder for all EACH 3,250.01 3.00 9,750.03

Providing and fixing 600 mmx25 mm H Type handle for Doors approved

1.12 MR make and designs as per engineer in charge EACH 6,505.38 7.00 45,537.63

Providing and fixing minimium 100 kg capacity flooor spring for Doors

1.13 MR approved make and designs as per engineer in charge EACH 11,500.00 7.00 80,500.00

Providing and fixing Glass door lock approved make and designs as per

1.14 MR engineer in charge EACH 2,850.00 7.00 19,950.00

2.00 CEILING - -

Digitally signed by AMIT

S No. Description Unit Rate

Non DSR Total Qty DSR Amount NDS Amount

Providing and fixing false ceiling at all height including providing and

fixing of frame work made of special sections, power pressed from M.S.

sheets and galvanized with zinc coating of 120 gms/sqm (both side

inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide

x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to

centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x

50mm long with 6mm dia bolts, other flange of cleat fixed to the angle

hangers of 25x10x0.50 mm of required length with nuts & bolts of required

size and other end of angle hanger fixed with intermediate G.I. channels

2.1 12.45 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to - -

which the ceiling section 0.5 mm thick bottom wedge of 80 mm with

tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre

to centre, shall be fixed in a direction perpendicular to G.I. intermediate

channel with connecting clips made out of 2.64 mm dia x 230 mm long

G.I. wire at every junction, including fixing perimeter channels 0.5 mm

thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter

of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm

centre, with 25mm long dry wall screws @ 230 mm interval, including fixing

of gypsum board to ceiling section and perimeter channel with the help

12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095-

(Part I) :2011 (Board with BIS certification marks) sqm 1145.95

Digitally signed by AMIT

S No. Description Unit Rate

Non DSR Total Qty DSR Amount NDS Amount

Providing and fixing mineral fibre false ceiling tiles at all heights of size

595X595mm of approved texture, design and pattern. The tiles should

have Humidity Resistance (RH) of 99%, Light Reflectance ? 85%,

Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as

per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking

T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick

(galvanized @120 gsm) comprising of main T runners of 15x32 mm of

length 3000 mm, cross T of size 15x32mm of length 1200 mm and

secondary intermediate cross T of size 15x32 mm of length 600 mm

to form grid module of size 600x600 mm suspended from ceiling using

galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm

outer diameter M-6 dash fasteners, 6 mm diameter fully threaded

hanger rod up to 1000 mm length and L-shape level adjuster of size

85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’.

The system should rest on periphery walls /partitions with the help of

GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm

thick sheet, to be fixed to the wall with help of plastic rawl plug at 450

mm centre to centre & 40 mm long dry wall S.S. screws. The exposed

bottom portion of all T-sections used in false ceiling support system

shall be pre-painted with polyester baked paint, for all heights. The

work shall be carried out as per specifications, drawings and as per

directions of the engineer-in-charge

CEILING PELMETS :- Providing and fixed pelmet of overall size

150mmx150mm and made hardwood framings hung from ceiling

2.3 MR @1000mm centre to centre with 1 nos of 12mm thk. fire retardant ply on RMT 960.00 5.00 4,800.02

vertical & 12mm thk. Commercial ply on horizontal surface (straight &

curved). Inclusive of finishing in Paint.

Providing the gypsum double sided cove of 150mm x 150mm having a

2.4 MR facia of 75mm to macth the specifications same as above RMT 675.00 1.00 675.00

GYPSUM BOARD VERTICAL BAND- upto100mm high gypsum band all round

the mineral fibre/ gypsum ceiling. In order to make the Mineral Fiber/

2.5 MR gypsum ceiling higher than the Gypsum Ceiling by upto 100mm as per RMT 395.00 10.00 3,950.01

drawings. (visible surface of gypsum band to not exceed 100mm)

including plastic emulsion paint.

3.0 FINISHING WORKS - -

Providing and applying plaster of paris putty of 2 mm thickness over

3.1 13.26 plastered surface to prepare the surface even and smooth complete. sqm 262.70 380.00 99,826.00

Digitally signed by AMIT

S No. Description Unit Rate

Non DSR Total Qty DSR Amount NDS Amount

Wall painting with premium acrylic emulsion paint of interior grade,

having VOC (Volatile Organic Compound ) content less than 50 grams/

3.2 13.83 litre of approved brand and manufacture, including applying additional - -

coats wherever required to achieve even shade and colour.

Applying priming coats with primer of approved brand and manufacture,

3.3 13.85 having low VOC (Volatile Organic Compound ) content. - -

With ready mixed pink or grey primer on wood work (hard and soft wood)

having VOC content less than 50 grams/ litre

Providing and fixing wall paneling and partition frame work made of

3.50 MR 25x50 mm aluminium section 600x600mm c/c distance as per approved SQM 834.76 350.00 2,92,166.70

4.0 MISCELLANEOUS WORKS - -

BLINDS Providing & supplying of Window Blinds as per the approved

sample in required shade and style consisting, of ZEBRA BLINDS comprising

of optima screen Fabric comprising of 22% polyester, 78% PVC, Fabric

weight 460-480G weight per sq m, Thickness 0.67 mm, Yarn count 18-

19/cm, having fire resistance standard – NFPA 701-89 small testing ISO-

5659-2 .Thetear resistance should be complying to ISO4674 & breaking

resistance – ISO 5081. The DRIVE UNIT shall be of clutch for quick, easy and

safe installation, moulded plastic with steel spring support and inserted

into the tube end. It shall be driven by a ball chain pulley with ball chain

and can be positioned at right side or left hand side of the Shade. The

Shade when lowering or raising, shall be automatically locked in position

upon release of the ball chain by means of a built in friction lock.Universal

clutch for left and right hand operation.Chain Gear Ratio of 1.75:1. The

END PLUG shall be molded of plastic witha steel location pin.The plug

shall be inserted into the tube end.(Opposite to the Drive Unit) for ease of

installation. The SUPPORT BRACKETS shall be of coated steel & provided

with covers and used in right hand or left hand positions differentiated by

the acceptance of the of the rectangular drive unit support or the round

idler plug pin.Can beinstalled (a) On Face (b) Ceiling Mount (c) On Frame

(d) in Recess. The Bracket should be protruding outside maximum of

80mm.The ROLLER TUBE shall be of extruded aluminum with 37mm internal

diameter & skin thickness of 1mm and shall incorporate a key way integral

with the tube to accommodate the spline. The BOTTOM RAIL shall be a

Flat Bottom made up of powder coated steel. The BALL CHAIN shall be

2mm diameter cord with 4.5mm diameter acetal balls moulded co-axially

to it on 6mm pitch to form an endless ball chain. It is used for raising or

Digitally signed by AMIT

S No. Description Unit Rate

Non DSR Total Qty DSR Amount NDS Amount

FROSTEDFILM(CRYSTALQUALITY):-Providing and fixing scotchcal over glass

4.2 M.R. surface as approval of the Architect. (Only film surface area shall be SQM 2,250.01 20.00 45,000.19

measured and paid).

Cabinet Shutters out of 19mm Commercial Plybaord finished in 1mm

Laminate of matching, Shutters to be fixed to a frame. Rigidly fixed on

both sides and top finshed in laminate. No internal carcass required. All

Hinges of hettich or equivalent. Internal Surface of the shutter in balancing

4.3 MR white laminate. All shutters to be provided with Stainless steel louvers at SQM 14,342.05 2.00 28,684.10

the top and bottom of the shutter as per the site requirements and

instrcution of the Engineer In charge.

Providing and Fixing Logo & Signage in 3D ,as per the approved Design/

pattern with Mat /Gloss Finish Brass Letters with Mettalic/ Acrylic Base,

4.4 MR complete as required at site with the direction of the Enginner In Charge sq inch 3,702.60 20.00 74052.00

Providing and Fixing of floor tiles with wear layer is of 0.5mm, made upof

Stone Polymer composite, 100% Water & Termite proof, Scratch/ Flame/

UV resistant, anti-microbial, 100% recyclable Green product having click

4.5 MR system with suitable skirting. Classification of abrasion resistance (Abrasion SQM 3,950.00 80.00 3,16,000.00

wheelfromH-18 Calibrade, loadApplied 1000 grams, No. of Cycles 14,400).

" ( Along with Matching Profiles)

Digitally signed by AMIT

Electrical/FA/PA

DSR- Description

S.No Unit Rate Total Qty DSR Amount NDSR Amount

1.0 DISTRIBUTION BOARDS.

Supplying and fixing following way, horizontal type three pole

and neutral, sheet steel, MCB distribution board, 415 V, on

surface/ recess, complete with tinned copper bus bar, neutral

bus bar, earth bar, din bar, interconnections, powder painted

including earthing etc. as required. (But without

MCB/RCCB/Isolator)

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C"

curve, miniature circuit breaker suitable for inductive load of

following poles in the existing MCB DB complete with

connections, testing and commissioning etc. as required.

Supplying and fixing following rating, four pole, (three phase

and neutral), 415 volts, residual current circuit breaker (RCCB),

1.4 having a sensitivity current 30 mA in the existing MCB DB - -

complete with connections, testing and commissioning etc. as

2.0 CABELS / MAINS - -

Supply ,laying,testing and commissoning of 1100V grade

armoured cable having sector / circular shaped aluminium /

copper conductor PVC insulated cores under ground PVC tape

wrapped inner sheathed, GI strip / wire armoured and overall - -

extruded PVC sheathed confirming to IS: 1554, laid on wall or

ceiling using GI clamps and spacers as per route shown at site

and further as directed by Engineer-in charge

2.1 MR 16 Sq.mm 4 core copper cable mtr. 825.00 20.00 16,500.00

2.1 MR 25 Sq.mm 4 core copper cable mtr. 1,450.00 50.00 72,500.00

4.0 WIRING - -

Wiring for light point/ fan point/ exhaust fan point/ call bell point

with 1.5 sq.mm FRLS PVC insulated copper conductor single core

cable in surface / recessed medium class PVC conduit, with

4.1 1.10 modular switch, modular plate, suitable GI box and earthing the - -

point with 1.5 sq.mm FRLS PVC insulated copper conductor single

core cable etc. as required.

a 1.10.3 One light point controlled by one 6A switch Per Pts 1,467.00 30.00 44,010.00

Wiring for group controlled (looped) light point/fan point/exhaust

fan point/ call bell point (without independent switch etc.) with

1.5 sq. mm FRLS PVC insulated copper

4.2 1.54 conductor single core cable in surface/ recessed steel conduit, - -

and earthing the point with 1.5 sq. mm FRLS PVC insulated copper

conductor single core cable etc. as required

Wiring for circuit/ submain wiring alongwith earth wire with the

following sizes of FRLS PVC insulated copper conductor, single

4.3 1.7 core cable in surface/ recessed steel conduit as required. - -

a 1.7.1 2x1.5sqmm+1x1.5sqmmearth wire Per mtr. 327.00 150.00 49,050.00

DSR- Description

S.No Unit Rate Total Qty DSR Amount NDSR Amount

No. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

2 X 4 sq. mm + 1 X 4 sq. mm earth wire

Wiring for twin control point wiring using 1.5 sqmm copper

conductor FRLS PVC insulated copper conductor cable drawn

through 25 dia MS conduit laid in surface/concealed over false

4.4 1.4 ceiling or in slab/wall chases including ,2way modular Per Pts 1,981.00 20.00 39,620.00

switches,modular plate ,suitable GI box and earthing the point

with 1.5 sqm FRLS PVC insulated copper conductor single core

cable as required

Supplying and fixing following modular switch/ socket on the

4.5 1.24 existing modular plate & switch box including connections but - -

excluding modular plate etc. as required.

c 1.24.4 3 pin 5/6 A socket outlet Each 122.00 60.00 7,320.00

d 1.24.5 6 pin 15/16 A socket outlet Each 197.00 80.00 15,760.00

Supplying and fixing following size/ modules, GI box alongwith

4.6 1.27 modular base & cover plate for modular switches in recess etc. as - -

Supplying and fixing following Modular base & cover plate on

existing modular metal boxes etc. as required.

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm

solid copper conductor PE insulated, shielded with fine tinned

copper braid and protected with PVC sheath in the existing

surface/ recessed steel/ PVC conduit as required.

Supplying and laying HDMI Cable with connector on both ends

upto 15m length or as per site requirement

5 LIGHTING FIXTURES - -

Supply, Installation, Testing and Commisioning of pre-wired round

shape Surface Mount 15Watt LED Down Lighter fitting complete

with all accessories, housing made of Aluminium Die-cast, System

Efficasy >100 LPW, CRI >80, CCT of 4000K. suitable for 220 V, 50 Hz,

The luminare rated life (L70) >50000 Hours with High efficiency

5.2 MR driver with inbuild surge protection, over voltage protection, short NOS 1,470.91 60.00 88,254.35

circuit protection and operating at >0.95 PF., BIS approved Driver

including connection with 1.5 sq. mm FR PVC insulated, copper

conductor, single core cable and earthing etc as required.

Supply, Installation, Testing and Commisioning of 600X600 36-

40Watt LED fitting complete with all accessories, housing made

of Aluminium Die-cast, System Efficasy >100 LPW, CRI >80, CCT of

4000K. suitable for 220 V, 50 Hz, The luminare rated life (L70)

5.5 MR >50000 Hours with High efficiency driver with inbuild surge NOS 3,250.00 28.00 91,000.00

protection, over voltage protection, short circuit protection and

operating at >0.95 PF., BIS approved Driver including connection

with 1.5 sq. mm FR PVC insulated, copper conductor, single core

cable and earthing etc as required.

6 WIRING FOR DATA AND VOICE OUTLETS - -

Supply and fixing the following sizes of PVC medium duty ISI

marked conduits (IS : 9537 Part-III) complete with accessories

6.1 such as bends, junction boxes, pull boxes etc., in recess or on - -

surface including cutting chases in the walls/floors and making

good the same complete as required.

Supplying and drawing of CAT 6A U/UTP cable, white jacket, 4

6.2 1.53 pair LAN Cable in the existing surface/ recessed Steel/ PVC - -

conduit as required.

DSR- Description

S.No Unit Rate Total Qty DSR Amount NDSR Amount

No. Supply & fixing of Plug in type information outlet (campatible with

6.3 MR data cables) in existing faceplate/ GI Box in wall/furniture/floor Nos. 582.51 60.00 34,950.56

complete as required.

Supplying and fixing following modular switch/ socket on the

6.4 1.24 existing modular plate & switch box including connections but - -

excluding modular plate etc. as required.

1.24.6 Telephone socket outlet Each 148.00 40.00 5,920.00

Supply and fixing of the following types Face Plates complete

with all accessories.

Supply & Fixing of Dual Faceplate, Duplex Port (for data and for

voice) or as required square plate having spring shuttered front

a. MR access for preventing ingress of dust, dimension as per Nos. 90.04 40.00 3,601.58

commercially available modular office furniture.

Supply ,laying ,installing , testing and commmissioning of the 50

pair multi core 0.61 mm annealed copper conductor PVC

insulated and PVC sheathed armoured telephone cables

6.6 MR generally conforming to ITD S/WS-11-C and IS 1554 part I direct in mtr. 457.57 50.00 22,878.28

ground /surface and / or in existing pipe as required and includig

making terminal joints, complete as required.

Supplying, installing, testing and commissioning of 24 port Cat 6A

patch panels available with block of four equipped with tool less

6.7 MR IO, Rack Mountable. 19" Modular Patch Panel, loaded CAT6A EACH 16,491.19 1.00 16,491.19

U/UTP 24 port LCS2 rack mountable to be compatible in 4nos of 6

X RJ 45 Tool less connector U/UTP unit in a block.

7 CABLE TRAY.& RACE WAY. - -

GI Raceway & Junction boxes ( Raceway on floor shall be of

aluminium only)

MR Providing and fixing 2 mm thick steel sheet factory fabricated

post galvanized raceway with internal partition/compartmentized

of the following sizes including providing removable 3 mm thick GI

cover, knock out holes and fixing accessories earthing with 8 SWG

copper earth wire complete as required including floor supports, - -

bends, access boxes, tap off boxes and cross over as per

specification and site requirement. (overhead / wall mounted

recovery & function boxes shall be 1.6 mm thick)

c) MR 150 mm wide x 38 mm deep raceway or as per site RM 1,603.10 10.00 16,031.00

d) MR 100 mm wide x 38 mm deep raceway or as per site RM 1,250.00 10.00 12,500.00

MR Providing and fixing 150 x 150 x 60 mm deep 1.6 mm thick GI

7.4 sheet junction box including providing 3 mm thick stainless steel Nos. 1,874.51 5.00 9,372.54

cover as per specification.

A. SITC OF FIRE ALARM SYSTEM & ACCESSORIES : - -

Supplying, installation, testing & commissioning of intelligent Pcs

1 17.2.4 analog addressable photothermal detector complete with 2858.00 10.00 28,580.00

mounting base complete as required.

Supplying, installation, testing & commissioning of addressable Pcs

manual call point complete as required.

Supplying, installation, testing & commissioning of addressable Pcs

horn cum strobe complete as required.

Supplying, installation, testing & commissioning of fault isolator Pcs

complete with base as required.

Supplying, installation, testing & commissioning of response Pcs

5 17.2.5 indicator on surface/recessed MS Box having two LED, metallic 276.00 1.00 276.00

cover complete with all connections etc as required.

Supply onstallation testing and commissioning of 4 loop

6 MR conventional fire panel as per direction of engineer in charge - -

Four loop panel Each 26550.00 1.00 26,550.00

B CABLES & ACCESSORIES FOR FAS : - -

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, RM

600/1000V rated with annealed copper conductor having

6 17.5.2 XLPE insulation, steel wire armouring & FRLS outer sheath 173.00 200.00 34,600.00

complete as required.

DSR- Description

S.No Unit Rate Total Qty DSR Amount NDSR Amount

C No. SITC OF PUBLIC ADDRESSABLE SYSTEM & ACCESSORIES : - -

Supplying, installation, testing & commissioning of Pcs

7 17.3.4 ceiling/wall mounted loud speaker, 3/1.5 Watt in ABS 2428.00 5.00 12,140.00

enclosure complete as required.

D CABLE & ACCESSORIES FOR PA SYSTEM - -

Supplying and drawing of cable Fire Retardant PVC insulated

copper conductor cable in the existing surface / recessed

17.5.3 steel conduit of following pairs, cores and size including - -

connections and interconnections etc. as required..

8 17.5.3.1 speaker cable Single pair, 2-core, 1.5 sqmm RM 54.00 200.00 10,800.00

Supplying, installation, testing & commissioning of digital Each

9 17.3.6 audio amplifier 50 Watt, 25V rms operating at 240 volt AC 96779.00 1.00 96,779.00

supply complete as required.

SUB HEAD (H) : UPS SYSTEM - -

Supplying, installation, testing and commissioning of (N+1) 10

kVA/27KW online double conversion fully microprocessor based

,indoor type, compact UPS system of mentioned rating with

designed output PF .9 at 40 degree and IGBT based PWM

technology to achieve THD < 5% and input power factor of

greater than 0.95 at 50% loading, Efficiency >= 93% at 50 % load,

13 MR suitable for three phase AC input voltage 320 V to 480 V, 50 Hz - -

+3% / - 3 % and three phase AC output voltage 415 ± 1% volts &

frequency 50 ± 0.5 Hz with all components as mentioned in BOQ,

specifications and schedule, complete as required and as per

technical specification. Each unit shall be comprising of the

following: Total 2 no.s (In parallel)

125% rated Rectifier cum charger unit +100% rated Invertor,

Integrated in UPS module

100% rated Inbuilt static switch at the invertor output + 2 Nos. - -

100% rated Inbuilt static switches at the static bypass line.

100% rated Inbuilt Maintenance Bypass. - -

Web-enabled Monitoring and Management through SNMP

protocols for multi-OS environmen

Inbuilt feature required for input phase seq protection and

automatic change. UPS should work on mains and should not go

to battery mode in case of input phase sequence change

Supplying, unloading, installing testing and commissioning of

necessary VRLA batteries of suitable size having 15 minutes back

up time to 30KVA UPS for full load (75Ah Batteries X 20 No.) to be

provided. 1 No spare batteryof same AH to be provided and cost

to be added. Total VAH = 18000VAH - -

Note : Concerning vendor needs to furnish the battery sizing

calculations at the time of GA approval and battery size has to

be as per the approved GA drawing.

Run the battery diagnostic test. - -

Automated unattended shutdown of computers. - -

Local notification through audible alarm. - -

Software should support :

latest version of Microsoft Windows/ Server, AIX, HP-UX, Sun Solaris, Set 380650.00 1.00 3,80,650.00

Linux, Novell Netware, MAC

Total DSR & Total Non DSR 9,16,480.00 8,06,607.45

1.0 VRF/VRV OUTDOOR UNIT Unit Rate Total Qty DSR Amount NDSR Amount

Supply Installation, Testing & Commissioning of modular type Variable

Refrigerant Flow/ Variable Refrigerant Volume air cooled Outdoor

units suitable for cooling and heating, having all hermetically sealed

inverter type Scroll Compressor(s), minimum two compressors for

above 14 HP modules, microprocessor based Controller, top

discharge type condensing unit(s), with R410A Refrigerant, vibration

1.0 1.1 isolators, with suitable foundation etc. complete as required.The unit Per HP 16415 20.00 3,28,300.00

shall deliver the rated capacity at AHRI Conditions and work even at

50°C ambient temperature without tripping.The unit shall be suitable

to work on 400V+/-10%, 3 Phase, 50Hz AC power supply.The unit shall

be filled with first charge of the refrigerant and ready for use as

required.The COP at AHRI conditions shall not be less than 3.1 and

IEER not less than 6.5 .

2.0 INDOOR UNIT

Supply, installation, testing and commissioning of following minimum

capacity 4-wayflow VRV/ VRF Cassette Type Indoor ceiling mounted

unit equipped with synthetic washable media pre-filter, fan section

with low noise fan/ dynamically balanced blower, multi speed motor,

coil section with DX Copper coil, electronic expansion valve, outer

cabinet, drain pump, grill, necessary supports, vibration isolation,

cordless remote control etc., suitable for operation on single phase

230V±10%, 50 HzAC supply, complete, as required. The unit shall have

automatic force shut down provision in case of fire on receiving

signal from BMS System. The cooling capacity of indoor unit will be at

air inl et conditions of 27 Degree CD Band 19 Degree CWB

4-Way Cassette type - -

Digitally signed by AMIT

1.0 VRF/VRV OUTDOOR UNIT Unit Rate Total Qty DSR Amount NDSR Amount

3.0 REFRIGERANT PIPING - -

Supply, Installation, testing and commissioning including

vaccumiazation and Nitrogen testing of following nominal sizes of

soft/hard drawn copper refrigerant piping for VRV/VRF system,

DSR 2019 complete with fittings, with suitable adjustable ring type hanger

3.0 VRF/VRV supports, jointing/brazing including accessories, insulated with XPLE - -

Item No 5 Class-O tubular insulation/with Class-O closed cell elastometric

nitrile rubber tubular sleeves sections of specified thickness as given

below for Suction and Liquid lines, all accessories as per

specifications etc. as required :

9.5 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick

12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick

15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick

19.2 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick

22.2 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick

34.9 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm with 19 mm thick

4 CONDENSATE DRAIN UPVC PIPE - -

Supply, installation, testing and commissioning of uPVC Pipe ,complete with

fittings, supports,U trap arrangement,Clean Plug with 6mm nitrile insulation and - -

accessories as per specifications, drawings.

4.3 MR Imported fittings Y-joints and headers etc. Nos 4281.4 8.00 34,251.26

Providing and fixing control cum transmission wiring of 2 core x 1.0 sq. mm copper

in suitable conduits between indoor and outdoor unit.

Digitally signed by AMIT

1.0 VRF/VRV OUTDOOR UNIT Unit Rate Total Qty DSR Amount NDSR Amount

MR Supply and fixing IP-55 based outdoor MCB box with 1 NOS 65 amp RCCB Nos 14650.0 1.00 14,650.00

Supply and fixing MS base frame for VRV outdoor stand as per approved size

Supply installation testing and commissioning Treated Fresh Air HRV capacity 800 CFM for

Fresh Air Ventilation as per approved make

2 MR-2 Providing and fixing of 24 gaze GI Ducting rectangular as per required SQFT 500.00 230.00 1,15,000.00

3 MR-3 Providing and fixing of Aluminium flexible Duct NOS 7.00 6,844.00 47,908.00

Providing and fixing powder coted louver and birdscreen for fresh air wall opening

5 MR-5 Providing and fixing of canvas connection NOS 1.00 6,200.00 6,200.00

6 MR-6 Providing and fixing Grill NOS 8.00 2,655.00 21,240.00

Digitally signed by AMIT

Sr. No. Item Description Unit Rate Qty Amount

1 Supply, Installation, Testing & Commissioning of 24 PORT Managed Network Switch Unit 52,650.00 1.00 52,650.00

Supply, Installation, Testing & Commissioning of 5MP IR IP H.265 Vandal Proof Dome camera with

2.8 to 12mm Motorized Lens,Smart IR, up to 30M IR distance,Up to 120 dB WDR (Wide Dynamic

Range),3D DNR (Digital Noise Reduction),H.265+, H.265, H.264, MJPEG,Corridor mode, Triple

1 streams,3-Axis, IP67, IK10 Vandal Resistant,Colour: 0.005Lux (F1.4, AGC ON), 0 Lux with IR,Video Nos 9,500.00 8 76,000.00

Compression H.265+, H.265, H.264, MJPEG,Behavior Detection Intrusion, Crossing line, Motion

detection, Object left, Missing object,Intelligent Identification Face detection, Defocus, Scene

Change,PoE (IEEE802.3 af) Power consumption: Max 7.2W,Edge Storage Micro SD Card, Up to

Supply, Installation, Testing and Commissioning of 16Ch Embedded Network Video Recorder with

2 4 Sata Supports 1 × RJ45 1000M ,4K Cameras, HDMI, VGA, RAID, Redundant power supply, Smart Nos 85,320.00 1 85,320.00

Analytics and ONVIF

SITC of SSD Hard Disk Drive 8TB, 24/7 surveillance category Only complete etc as required.etc.all

C. 200 Pair MDF Box -

1 200 Pair MDF Box with mounting Frame Nos. 32,500.00 1 32,500.00

Digitally signed by AMIT

Specifications Rate Qty Amount

DGM Table Supplying and placing in position of main table as per photograph/drawing .The table shall be

made out of 25mm thick pre -laminated particle board of approved shade. The working and

non working edges shall be finished with machine pressed with 2mm PVC egdge banding. The

table top shall be supported with MS powder coated "C" shape leg of size 50mm x 50mm with

4 connectors of size 40mm x 40mm. The front modesty are made out of 18mm thick prelaminated 65,650 1.00 65,650.00

particle board with 2mm thk pvc edge banding. The table shall be provisioned with Side unit of

overall size: 1800mm(L) x 450mm(D) x 675mm(H) . Side storage having a provision for three

equal drawer unit and two openable shutter & one open storage with shelf in it. The Side unit

top shall be made out of 18mm thick pre laminated particle board and rest all storage to be

made out of 18mm thick pre laminated particle board. Provision of Junction box, wire raceway

DGM High Supplying and placing in position of 360 degrees revolving high back chair . The chair of Size :-

Back Chair (W)590mm X (D)505mm X (H)1180mm - 1280mm. The chair shall be ergonomically design

contour lumbar back design made of 12mm thick BWR plywood (IS Grade - 303 for seat and

back) upholstered with leatheritte and cut foam. The chrome plated loop armrest with

padded upholstery is provided for extra comfort. The chair shall be provided with pneumatic

5 height adjustment which shall have stroke of 10.0 24,650 1.00 24,650.00

+/- 0.3 cm . Five star chrome base with nylon castors . Chair seat has foam of density 30- 35 (+/-

2kg /m3) Dimensions The backrest has a foam of 28kg/m3.

DGM Visitor Supplying and placing in position of medium back cantilever chair of size: (W)610mm X

Back Chair (D)505mm X (H)990mm.A contemporary design with an all black finish, . Material &

subtype:Premium Leatherette, Colour & Colour Family:Black, Dimension(W)610mm X (D)505mm

X (H)990mm, Back Type:Cantilever, Base:Cantilever Frame, Base Type:Cantilever, Maximum

6 Seating Height:19".The Seat & back are made up of 12mm thk hot pressed plywood upholstered 19,600 3.00 58,800.00

with PVC with polyurethane foam, chair seat has foam of density 32-35 kg/m3. The backrest

has a foam of 28kg/m3.

2 seater sofa Supplying, and placing in position of sofa with premium Leatherette upholstery adds class to

the soft cushioned backrest and seating. Material & subtype:Premium Leatherette, Colour &

Colour Family:as per requirement, Seating Height:16.14"

,Legs:Stainless Steel, Finish:Matte, Size:Compact, Style:Modern, Texture:Two Tone. steam beech

solid wood have used for framing construction of sofa .The seat cushion is made of multi

7 layered foam of density 32-35 kg/m3. The seating cushion have 2.75 & 42,500 2.00 85,000.00

1.75 inches of elastic webbing. The thread used is nylon bonded to provide lasting stitch

strength . The backrest has a foam of 28kg/m3 with polyster polyfill outer layer of 200 gsm. 2

seater Dimension(L)1390mm X (D)750mm X (H)710mm

Digitally signed by AMIT

Specifications Rate Qty Amount

AGM Table Supplying and placing in position of main table as per photograph/drawing .The table shall be

made out of 25mm thick pre -laminated particle board of approved shade. The working and

non working edges shall be finished with machine pressed with 2mm PVC egdge banding. The

table top shall be supported with MS powder coated "C" shape leg of size 50mm x 50mm with

connectors of size 40mm x 40mm. The front modesty are made out of 18mm thick prelaminated

particle board with 2mm thk pvc edge banding. The table shall be provisioned with Side unit of

overall size: 1800mm(L) x 450mm(D) x 675mm(H) . Side storage having a provision for three

equal drawer unit and two openable shutter & one open storage with shelf in it. The Side unit

8 top shall be made out of 18mm thick pre laminated particle board and rest all storage to be 55,650 4.00 2,22,600.00

made out of 18mm thick pre laminated particle board. Provision of Junction box, wire raceway

and 6 module fliptop box for wire passing or as per site requirement. Main Table Dimension

(L)1800mm X (D) 900mm X (H)750mm overall Side Runer Dimension (L)1800mm X (D) 450mm X (H)

AGM High Supplying and placing in position of 360 degrees revolving high back chair of size: 660mm (L) x

Back Chair 490mm(D) x 1315mm(H). The seat cushion to be upholstered on 10-12mm thick water proof

plywood and moulded foam. The seat to be made with 12 mm thick hot pressed BWR plywood

(IS grade - 303) upholsetered with Polyurethane foam and mesh fabric over it. The chair shall be

provided with self tension single locking mechanism and pneumatic height adjustment which

shall have stroke of 10.0 +/- 0.3 cm .The black .The pneumatic height adjustment shall have

adjustment stroke of 100 mm and shall be operated at 30kgs extension force.The Seat & back

are made up of 12mm thk hot pressed plywood upholstered with PVC with polyurethane foam,

chair seat has foam of density 32-35 kg/m3. The backrest has a foam of 28kg/m3. adjustable

arm rest and head rest

Conference Supplying and placing in position of conference table of required size as per image/drawing.

Table The work surface top should be of thickness 42mm top prelaminated particle board with 2mm

thick PVC edge banding. The side panel are made up of 36mm thick prelaminated particle &

13 modesty panel are made out of 25mm thick prelaminated particle board with 2mm thick PVC 95,000 1.00 95,000.00

edge banding. The wire carrier should be made from 0.6mm thick CRCA & powder coated 40-

50 microns. Also having a provision of 6 module flip top box & metal raceway for wire flow.

Digitally signed by AMIT

Specifications Rate Qty Amount

Medium Back Supplying and placing in position of 360 degrees revolving medium back chair . The Craze

chair chair of Size :-(W)590mm X (D)505mm X (H)1005mm - 1115mm. The chair shall be ergonomically

design contour lumbar back design made of 12mm thick BWR plywood (IS Grade - 303 for seat

and back) upholstered with leatheritte and cut foam. The chair shall be provided with

14 pneumatic height adjustment which shall have stroke of 10.0 +/- 16,500 57.00 9,40,500.00

0.3 cm . Five star chrome base with nylon castors . Chair seat has foam of density 30-35 (+/-2kg

/m3) The backrest has a foam of 28kg/m3.

Modular Dimesnion: 1500mm(L) x 1500mm(L) x 600mm(D) x 1200mm(H) Modular Workstation With Side

Workstation Top with 3 drawer Pedestal Size 1500W x 600D x 750/1200H.Partition NI-60mm Partition Ht.

1200mm, Double Raceway systems Skirting label and below the table top . lower tile both side

laminated and upper tile inside side fabric, White

15 Board and white Tinted Glass . With Side Top Size 900W x 400D x 750H 25mm thick Gabel end 32,650 16.00 5,22,400.00

18mm thick MDF board., and 3Drawer top supported Pedestal unit Size 400W x 400D x

725H made in 18mm thick..Complete Made in MDF Board.. Laminate 1- Frosty White,

Laminate2 For drawer Facia-Honkong Blue, Fabric-F 161 Dolphin Blue, Powder Coating-

Munshel Gray. and White Tinted Glass

lenior Dimesnion: 1200mm(L)x 600mm(D) x 750mm(H) Modular Workstation With 1200mm, Double

Workstation Raceway systems Skirting label and below the table top . lower tile both side laminated and

upper tile inside side fabric, White

Board and white Tinted Glass . With Side Top Size 900W x 400D x 750H 25mm thick Gabel end

15 18mm thick MDF board., and 3Drawer top supported Pedestal unit Size 400W x 400D x 26,500 20.00 5,30,000.00

725H made in 18mm thick..Complete Made in MDF Board.. Laminate 1- Frosty White,

Laminate2 For drawer Facia-Honkong Blue, Fabric-F 161 Dolphin Blue, Powder Coating-

Munshel Gray. and White Tinted Glass

Reception Supplying and placing in position of main table as per photograph/drawing .The table shall be

Table made out of 25mm thick pre -laminated particle board of approved shade. The working and

non working edges shall be finished with machine pressed with 2mm PVC egdge banding. The

table top shall be supported with MS powder coated "C" shape leg of size 50mm x 50mm with

connectors of size 40mm x 40mm. The front modesty are made out of 18mm thick prelaminated

particle board with 2mm thk pvc edge banding. The table shall be provisioned with Side unit of

overall size: 1800mm(L) x 450mm(D) x 675mm(H) . Side storage having a provision for three

12 equal drawer unit and two openable shutter & one open storage with shelf in it. The Side unit 35,600 1.00 35,600.00

top shall be made out of 18mm thick pre laminated particle board and rest all storage to be

made out of 18mm thick pre laminated particle board. Provision of Junction box, wire raceway

and 6 module fliptop box for wire passing or as per site requirement. Main Table Dimension

(L)1350mm X (D) 900mm X (H)750mm overall Side Runer Dimension (L)1200mm X (D) 450mm X (H)

Digitally signed by AMIT

Specifications Rate Qty Amount

Pantry Table Providing & Installation of Pantry table of size 1.2m x .9m x 1.05m (ht) made out of 19mm thk.

Commercial Board finished in Recon veneer and DU Pont Coreanof approved shade as per

17 design. The Recon surfaces to be white Duco painted. A glass top od width 0.2m on SS pegs to 15,550 3.00 46,650.00

be provided above table. One (1) number Drawer pedestal with 3 drawers to be provided

under the table.

Pantry chairs Providing & Installation of Pantry chairs of required dimension and as per instruction of EIC

19 TABLE CENTRE TABLE WITH GLASS TOP 16,500.00 1.00 16,500.00

20 TABLE SIDE TABLE WITH WOODEN STRUCTURE 12,500.00 1.00 12,500.00

Openable The storage top 25 mm thick, shutter and side panels are made of 18mm thick and back panel

Shutter is made of 09mm thick MDF of approved shade. All the edges of storage surface shall be

21 storage provided with machine pressed imported PVC lipping glued with hot melt EVA glue free from -

any VOC with free groove handle and suitable lock. All exposed area PVC edge lipping

Total Amount 29,71,170.00

Total Amount 29,71,170.00

Digitally signed by AMIT