Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.9 LAccepted-AOC | L1 | Accepted-AOC BeingL1 | |
| 2 | L2₹10.1 L+₹7,256 (0.72%)Rejected-Finance | L2 | Rejected-Finance Not Being L1 | |
| 3 | L3₹11.0 L+₹88,674.50 (8.81%)Rejected-Finance D 65 423 C 1 RANA NAGAR COLONY GATE NO 4 LAHARTARA VARANASI UP PIN 221106 | VARANASI | VARANASI | UTTAR PRADESH | 221106 | L3 | Rejected-Finance Not Being L1 | |
| 4 | L4₹11.2 L+₹1.1 L (11.3%)Rejected-Finance MISRA ELECTROSTATE CENTRE BAR ASSOCIATION COMPOUND CIVIL COURT AYODHYA 224123 UP | AYODHYA | AYODHYA | UTTAR PRADESH | 224123 | L4 | Rejected-Finance Not Being L1 |
Tender Value
₹11 L
EMD Value
₹22,000
Closing Date
1 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (MES) Faizabad
Garrison Engineer Military Engineer Services Faizabad
REPAIR MAINT OF PAO ORS MAIN OFFICE AND RESIDENTIAL AREA AT SAKET PURAM IN THE AREA OF AGE BR-I UNDER GE FAIZABAD
2023_MES_573181_1
8325/E8
Open Tender
Civil Works
Item Rate
180 days
Faizabad
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE (MES) Faizabad
₹22,000
Yes
5 Apr 2023
5 Jan 2023
3 Feb 2023
5 Jan 2023
1 Feb 2023
19 Jan 2023
Amount
Taking down chowkat with shutter (without taking off shutters from the frame) not exceeding 1.50 Sqm each complete all as specified and directed by Engineer-in-Charge.
Taking down chowkhat with shutter (without taking off shutters from the frame) exceeding 1.50 Sqm but not exceeding 4.00 Sqm each complete all as specified and directed by Engineer-in-Charge.
M&L for 2nd class hard wood, plain straight, solid chawkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints, supplied and fied complete all as specified and directed by Engineer-in-Charge.
S&F 35 mm thick, 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc (without sash bars), edges of framing plain, chamferd or rounded, fitted with cut and mitred beads for securing glass etc, size of members of shutter as specified in SSR Part-I Section 8 Clause 8.24(a) and fixed complete all as directed by Engineer-in-charge.
S&F 30 mm thick flush shutters, solid core construction with block board core and plywood face panels, commericial type on both sides complete all as specified and directed by the Engineer-in-Charge.
S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, fixed in opening as per specifications and shown on drawing given in SSR- Part-I complete all as specified and directed.
S&F factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rails, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded /sealed to the styles and rails with suitable PVC sheet beading and joined together with solvent cement, supply and fixing in frame at site as per specifications and shown on drawing given in SSR Part-I complete all as specified and directed.
S&F 200mm size MS helical door spring including roller and roller plate complete all as specified and directed by Engineer-in-Charge.
S&F 100mm long ISI marked butt hinges, medium wieght, cold rollled, mild steel and fixed complete all as specified and directed by Engineer-in-Charge.
S&F 150mm size aluminium anodised barrel tower bolt of extruded section and fixed complete all as specified and directed by Engineer-in-Charge.
S&F 150 mm long aluminium handle, cast type, anodised and fixed complete all as specified and directed by Engineer-in-Charge.
S&F 250mm size aluminium alloy anodised sliding door bolt with hasp, staple and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed by Engineer-in-Charge.
S&F stainless steel wire cloth 0.36 nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples/nails complete all as specified and directed.
S&F in repairs, stainless steel wire cloth 0.36 nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples/nails complete all as specified and directed.
S&F in repairs, fastener and stay (peg stay) cast iron melleable or mild steel casement stays of size 300mm with hinged joint and two plates with studs complete all as specified and directed by Engineer-in-Charge.
S&F in repairs, 75mm long cast iron or malleable cast iron handles, cast type, stove enamelled black complete all as specified and directed by the Engineer-in-Charge.
M&L for preparation of new wooden or wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by the Engineer-in-Charge.
Demolition of brick or stone boulder masonry built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings and precast concrete articles complete all as specified and directed by the Engineer-in-Charge.
M&L for brick work with old size fly ash bricks in cement mortar (1:6), straight or curved on plan to any radious complete all as specified and directed by the Engineer-in-Charge.
Taking down cement or cement lime plaster of any description on brick or stone walls including racking out joints, hacking for key, scrubing down with water etc complete all as specified and directed by the Engineer-in-Charge.
M&L for 15mm thick plaster in cement mortar (1:4) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed by the Engineer-in-Charge.
M&L for 15mm thick plaster in cement mortar (1:6) on other than fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed by the Engineer-in-Charge.
M&L for complete removal of existing decorative treatment of any description on wall surfaces and applying two coats of cement base paint over a coat of alkalic resistant primer complete all as specified and directed by the Engineer-in-Charge.
M&L for complete removal of existing decorative treatment on wall /ceiling surfaces and applying two coats of oil bound distemper including roller mat finishing complete all as specified and directed by the Engineer-in-Charge.
M&L for preparing old decorated plastered surfaces of walls by wire brushing, cleaning with water etc and applying two coats of weather proof paint on projected portion of columns, chajjas, fins & facias etc complete all as specified and as directed by Engineer-in-Charge.
M&L for preparing old decorated plastered surfaces of walls by brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of lime white wash complete all as specified and as directed by Engineer-in-Charge.
M&L for complete removal of existing decorative treatment of any description and preparing surfaces by applying 1mm thick wall care putty complete all as directed by Engineer-in-Charge.
M&L for preparing old painted wooden or wood based surface of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by the Engineer-in-Charge.
M&L for preparing old painted steel & iron surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by the Engineer-in-Charge.
Hacking out old broken glass of any thickness, size, quality or descripiton from metal / wooden frames including punching or drilling out old glazing pin/spring and providing new ones in lieu and S&F 3mm thick sheet glass, ordinary quality in squares n.exc 0.50 Sqm in each pane complete all as specified and directed by the Engineer-in-Charge.
Taking up or down 20 mm bore steel tubing and connections including cleaning for re-fixing or removal to store and S&F new 20 mm dia bore GI tubing, medium grade with all fittings and fixed to walls or laid in floors complete all as specified and directed by the Engineer-in-Charge.
Dismantling PVC water storage tank exc 250 but n.exc 500 ltrs capacity and removing to store and S&F new 500 ltrs capacity Rotational moulded polythene water storage tank in three layers (cylindrical vertical with close top), hoisted and fixed in position including all fittings complete all as specified in SSR Part-I and as directed by Engineer-in-Charge.
S&F in repair, 20mm size PTMT ball valve, high pressure with epoxy coated aluminium rod & high density plastic ball, screwed for 20mm dia bore iron pipe complete all as specified and directed by the Engineer-in-Charge.
S&F in repair, 20mm dia bore Gun- metal, globe or gate valve with iron wheel head, screwed both ends for 20mm dia bore iron pipes complete all as specified and directed by the Engineer-in-Charge.
S&F in repair, 15mm dia bore cast copper alloy bib tap, cromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed by the Engineer-in-Charge.
S&F in repair, 15mm dia bore health faucet, chromium plated, fancy type, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.
S&F in repair, 15mm dia bore PVC connection 450mm to 600mm long with hexagonal brass chromium plated nuts and washers on both ends complete all as specified and directed.
S&F in repair, 20 mm dia brass chromium plated 'D' type 600mm long (between flanges) tubular towel rail with hook and fixed complete all as specified and directed.
S&F in repair, 10 ltrs PVC valveless, syphonic action type flushing cistern, low level, white with inlet, ball valve, float and handle including brackets and connection to inlet and flushing pipes complete all as specified and directed by the Engineer-in-Charge.
S&F in repair, stainless steel sink with drainage board, made of stainless steel 1mm thick sheet for kitchen or laboratory, over all size 915mmx460mm and bowl size 410mmx330mmx160mm and fixed in position including bedding in cement mortar to dwarf wall or fixing to contilever brackets and connecting union to pipe including 40mm dia brass chromium plated waste coupling and waste pipe of suitable size complete all as specified and directed by the Engineer-in-Charge.
Demolition & breaking of 100mm dia bore AC, Salt Glazed Stone Ware (SGSW) pipes of any description, laid in floor / trenches or fixed to walls in any position and S&F new 110mm dia bore PVC (SWR) rain water / soil, waste & vent pipes, single socketed, fixed to walls including PVC clamps or laid in flooring in any length with rubber ring joints, complete all as specified and directed by the Engineer-in-Charge.
S&F in repair, 110mm bore PVC (SWR) bends of any radius complete all as specified and directed by the Engineer-in-Charge.
Demolition of cement concrete in ground floors, roofs and pavings etc n.exc 15cm thickness including floor finishes like tiles (if any) of any description complete all as specified and directed by the Engineer-in-Charge.
M&L for 25mm thick PCC (1:2:4) type B-0 (using 12.5mm graded crushed stone aggregate) as in sub floor / roof padding in any position, finishing the surface even and fair complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubish off the premises complete all as spcified and directed.
M&L for virified ceramic tiles 10 mm thick dark shade (square/ rectangular) polished, area of each tile not exceeding 0.36 Sqm, laid over and including 15mm thick screed bed or bedding layer in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engineer-in-Charge.
S&F factory made uPVC ivory colour or as approved by GE, fully glazed and gauzed casement windows and ventilators with frame and openable shutters as per following specifications:and as directed by Engineer-in-Charge:- (a) Frame : Frame of windows/ ventilators shall be made out of uPVC multi-chambered hollow profiles of size 109x58 mm (Villa series) i.e. double rebate suitably steel reinforced with transome/mullion joints mitered and fusion welded at all corners, free from all sharp edges and blurs complete and fixed to opening as per manufacturer's instructions/specifications. (b) Glazed Shutter : Glazed shutter shall be made out of uPVC multi- chambered hollow profiles of size 60x78mm suitably steel reinforced to enhance the structural suitability of windows / ventilators with and including all requisite builders hardware of suitable size as approved by GE and provision of EDPM gasket/ beading for fixing glass pane in air tight glazing system including 5mm thick plain sheet glass ordinary quality complete in all respects. (c) Gauzed Shutter: Gauzed shutter shall be made out of uPVC multi cavity hollow profiles of size 46x82 mm suitably steel reinforced to enhance the structural suitability of windows / ventilators with and including GI channel of 1.20mm thickness welded in corners with and including stainless steel wire cloth of 0.36mm dia wire with1.40mm aperture fitted in shutters and all requisite builders hardware of suitable size as per site requirement and as approved by GE complete in all respects. Note: (i) Cost of glass panes, SS wire mesh and builders hardware of suitable size and fixing of MS gaurd bars shall be deemed included in quoted rates. (ii) All builders hardware shall be resistant to or protected against atmospheric corrosion and fixed with screws penetrated at least 2mm in reinforcement. (iii) Nothing extra shall be allowed over and above the quoted rates for variations in sizes of profiles / sections on upper side, if required as per manufacturer's specifications..
Supply only mild steel framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, frame work of water tanks & similar work conforming to Fe.290.Gde-E-165 complete complete all as specified and directed. Note: (i) Cost of fixing of MS grills/gaurd bars is included in Item No. 48.00 here-in-before.
Taking down carefully copper / aluminium point wiring (light, fan, call bell, two way, socket or power) complete with fittingS&Fixtures such as switches, ceiling roses, pendants, regulators, tube fittings and other kitS&Fittings, removing unserviceable materials from work site and making good disturbed portion / surface of wall/ floor/ ceiling etc by using cement mortar (1:4) including white / colour wash / distempering etc as required to match with the existing surfaces / location complete all as specified and as directed.
M&L for new concealed type point wiring with PVC insulated PVC unsheathed electric (FRLS) cable of size 1.5 Sqmm nominal cross sectional area, 1100 Volt grade, single core having multi stranded copper conductor with 1.5 Sqmm green colour PVC insulated unsheathed electric (FRLS) cable having multistranded copper conductor as earth wire connected to earth dolly by providing lugs including non-modular type GI sunken boxes suitable for non-modular switches/sockets etc with 3mm thick hylam sheet with glossy finish including necessary cutting for fixing switches, sockets, regulators etc, drawn through and including non metallic rigid PVC conduit (ISI marked) medium grade not less than 20mm dia with all conduit accessories in concealed wiring system including cutting chases in wall and making good in cement mortar (1:4) with all necessary surface finishes such as white / colour wash / distempering etc to match the existing surfaces complete all as specified for the following:-
All as per Srl item No. 50.00 above but for one light/fan point controlled by one, one way switch
All as per Srl item No. 50.00 here-in-before but for one bell point controlled by one bell push.
All as per Srl item No. 50.00 here-in-before but for one light point controlled by 2 Nos two way switch
All as per Srl item No. 50.00 here-in-before but for one socket outlet point 6 Amps on independent board
All as per Srl item No. 50.00 here-in-before but for One socket outlet point 6 A on same board
All as per Srl Item No. 50.00 here-in-before but concealed point wiring with 2.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed (FRLS) cable and 1.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed (FRLS) cable, green colour as earth continuity wire for 16 Amps power socket point controlled by one, one way 16 Amps non-modular switch on independent board complete all as specified and directed.
All as per Srl Item No. 50.00 here-in-before but concealed point wiring with 4.0 Sqmm multi-stranded copper conductor PVC insulated, unsheathed (FRLS) cable and 2.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed (FRLS) cable, green colour as earth continuity wire for one AC socket point on independent board complete all as specified and directed.
S&F switch piano flush type polycarbonate single pole one way 6 Amps complete all as specified and directed.
S&F switch piano flush type polycarbonate single pole two way 6 Amps complete all as specified and directed.
S&F switch piano flush type polycarbonate single pole one way 16 Amps complete all as specified and directed.
S&F socket outlet polycarbonate 2 in 1, 3 pin 6 Amps flush type complete all as specified and directed.
S&F socket outlet polycarbonate 2 in 1, 3 pin 6/16 Amps flush type complete all as specified and directed.
S&F bell push piano flush type polycarbonate single pole, 5 Amps complete all as specified.
M&L for ceiling rose in polycarbonate 3 terminal brass flush type 6 Amps, 250 Volts, AC supply (ISI marked), fixed on & including 3 mm thick 75mm dia sunmica hylum plastic laminated round sheet complete all as specified and directed.
S&F electronic fan regulator 230 Volts, stepped type (5 steps) socket type, hum free 100/300 watt, complete all as specified and directed.
S&F in replacement, bell/buzzer Ding Dong type AC 230 Volts complete all as specified and directed.
Taking down existing submain wiring of any description and M&L for sub main wiring with two runs of 10.00 Sqmm (nominal cross-sectional area) FRLSH PVC insulated & unsheathed 1100 Volts grade multistranded copper conductor single core cable drawn through and including PVC concealed conduit of adequates size and fittings and accessories concealed in walls, floors and ceilings complete including one run of FRLSH PVC insulated & unsheathed single core multistranded copper conductor cable of size 10.0 Sqmm green in colour as earth continuity conductor connected to common earth dolly from main DB to Sub DB including cutting chases and making good in cement mortar (1:4) with all necessary surface finishes such as white / colour wash / distempering etc to match the existing surfaces complete all as specified. Note:- (i) Two runs of cable, one run of earth wire and one run of PVC non metallic conduit shall be measured as one run length. (ii) Cable required for connection to DBs and MCBs shall be deemed included in quoted rates. (iii) Earth wire shall run inside the conduit pipe.
All as per srl item No. 62.00 here in before but submain wiring with two runs of 6.00 Sqmm FRLSH PVC insulated copper conductor and one run of 6.0 Sqmm FRLSH earth continuity conductor complete all as specified.
All as per srl item No. 62.00 here in before but submain wiring with two runs of 4.00 Sqmm FRLSH PVC insulated copper conductor and one run of 4.0 Sqmm FRLSH earth continuity conductor complete all as specified.
M&L for rigid non-metallic PVC conduit of 20 mm dia including all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc for dressing of hanging wires all as specified and as directed.
Taking down unserviceable main switch, DB’s insulators, DB for MCB and board etc of any type and any capacity and further disposal including making good the disturbed surfaces in cement mortar (1:4) including applying white/colour wash / paint / distemper as required to match the existing surfaces complete all as specified and as directed.
S&F epoxy powder coated MCB distribution box double door TPN 4 way vertical type for MCBs alonwith provn of MCB as incomer with common bus-bar at incoming end of outgoing MCBs grouted / flush to wall including necessary cutting and making good disturbed surfaces in cement mortar (1:4) and applying white/colour wash / paint / distemper as required to match the existing surfaces complete all as specified and directed. Note: - MCBs shall be measured and paid for separately under respective item of Schedule 'A'.
S&F epoxy powder coated MCB distribution box double door SPN 8 way vertical type for MCBs alonwith provn of MCB as incomer with common bus-bar at incoming end of outgoing MCBs grouted / flush to wall including necessary cutting and making good disturbed surfaces in cement mortar (1:4) and applying white/colour wash / paint / distemper as required to match the existing surfaces complete all as specified and directed. Note: - MCBs shall be measured and paid for separately under respective item of Schedule 'A'.
S&F epoxy powder coated MCB distribution box double door SPN 4 way vertical type for MCBs alonwith provn of MCB as incomer with common bus-bar at incoming end of outgoing MCBs grouted / flush to wall including necessary cutting and making good disturbed surfaces in cement mortar (1:4) and applying white/colour wash / paint / distemper as required to match the existing surfaces complete all as specified and directed. Note: - MCBs shall be measured and paid for separately under respective item of Schedule 'A'.
S&F MCB, TPN, 63 A, 415V, 10kA, 'C' curve miniature circuit breaker (MCB), fixed in DB including necessary connection, testing and commissioning, complete all as specified.
S&F MCB, SPN, 40 A, 230V, 10kA, 'C' curve miniature circuit breaker (MCB), fixed in DB including necessary connection, testing and commissioning, complete all as specified.
S&F MCB SP, 6 to 32 A, 230 V, 'C' curve, 10 kA, miniature circuit breaker (MCB), fixed in DB including necessary connection, testing and commissioning, complete all as specified.
S&F in replacement, LED tube light fitting,1X20 Watt surface and wall mounted decorative ultra slim square profile with extruded polycarbonate, environmental friendly, energy efficient ready to use pack fitting including connection with & provn of twin core multi stranded copper cable of size 1.5 Sqmm from ceiling rose to tube light fitting complete all as specified and directed. Make : Havells Cat Part No. LHEXAPP7IN1W020 or equivalent as approved by GE
S&F in replacement, batten LED fitting 1x10 Watt, Cool Day Light (CDL), elite pride plus 5Watt 6500K LED including connection with & provn of twin core multi stranded copper cable of size 1.5 Sqmm from ceiling rose to tube light fitting complete all as specified and directed. Make : Havells Cat Part No. LHEXAPP7IN1W010 or equivalent as approved by GE
S&F in replacement, building security light LED 20 Watt, IP 66, including provision of GI bracket of siutable size, clamp and nut & bolt etc including PVC insulated flexible wire 3 core 23/0076 copper conductor, complete all as specified. Make : Surya Cat Part No. SLE UL 20W IP66 (LXN) or equivalent as approved by GE
S&F in replacement, LED numinair 600x600mm, 35/36 watt, 220 Volt AC recessed type high efficiency PMMA diffuser soft glair free light with driver, holders & LED lamp suitable for ceiling mounting including aconnecting up with driver using three core flexible copper conductor of suitable size complete all as specified and directed.
S&F in replacement, angle holder (metal ring) PVC / polycarbonate type with back plate, fixed on & including 3 mm thick 75mm dia sunmica hylum plastic laminated round sheet suitable for LED bulb complete all as specified and directed.
Taking down existing earthing of any description and M&L for new earthing complete with galvanized steel plate electrode 600 mm x 600 mm x 6 mm thick, burried directly in ground vertically in pit of depth not less than 2.25 metre below normal ground level with top edge of the earth plate at a depth not less than 1.5 meter below normal ground level surrounded with mixture of charcoal and common salt in alternate layers from all sides and electrode connected to 4mm dia GI earthing wire by means of GI bolts, nuts, check nuts and washers, earthing wire protected by GI pipe 20 mm bore (light grade) connected to main switch board or any other electrical equipment all as shown in electrical plate No. 3 of SSR-2009 Part I including all necessary excavation and earth work in any type of soil, 20 mm bore medium grade GI pipe for watering, funnel with wire mesh, PCC (1:3:6) type C1 in concrete chamber of size not less than 300x300x300mm (internal diamentions) with cover made of precast cement concrete (1:2:4) type B-1 (using 20mm grded stone aggregate) complete all as specified and directed by Engineer-in-Charge. Note: (i) The chamber shall be constructed at 1.00 meter away from outer edge of earthing pit. (ii) The unit rate includes earthing wire and protection pipe upto maximum 7.50 meter from earth plate, earth point / test point
JAI MAA VINHYAVASANI CONSTRACTION CO
R K BROTHERS
MISRA TRADING CORPORATION
Bidder Name
Saket Traders
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .