REPAIRS TO FLOORING, CEILING, ROOF SHEET AND OTHER B/R WORKS IN BLDG NO ....... AND CERTAIN OTHER LOCATION UNDER AGE B/R-I KAMPTEE.

Amount

Taking down cement plaster, any description on brick or stone walls including raking out joints hacking for key, scrubbing down with water etc complete all as specified and directed.

Demolition of brickwork built in cement mortar or cement lime mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L for brick work with fly ash bricks old size, straight or curved on plan exc 6m mean radius, built in cement mortar 1:4 complete all as specified and directed.

All as per item No 3 above but half brick thick wall in CM 1:4 complete all as specified and directed.

M&L for rendering 15 mm thick in two coats (10 and 5mm thick) in CM 1:4 on brick or concrete surfaces even & fair smooth, using water proofing liquid compound and without using extra cement complete all as specified and directed. Note:- Water proofing liquid will be measured and paid separately.

M&L for rendering 10mm thick CM 1:6 on brick or concrete surfaces finished fair even complete all as specified and directed.

Supply only liquid integral water proofing admixture (Make: Pidilite or its equivalent) complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying two coats of cement base paint on walls complete all as specified and directed.

M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of oil bound distemper over a coat of Birla white care putty complete all as specified and directed.

M&L for complete removal of existing treatment of walls and applying two coats of oil bound distemper over a coat of birla white care putty complete all as specified and directed.

M&L for complete removal of existing treatment on wall and preparation of surfaces and applying texture paint over a coat of primer or as per manufacturer's instruction complete all as specified and directed.

M&L for complete removal of existing treatment on wall and preparation of surfaces and applying two coats plastic emulsion paint over a coat of alkali resistant priming paint as primer complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding etc (but not backing) and disposal of rubbish outside of MD land complete all as specified and directed.

M&L for coloured non skid ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors/wall etc. set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including 15mm thick screed bed of cement mortar (1:6) etc complete all as specified and as directed.

M&L for coloured non skid ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding. 0.38 sqm, in floors/wall etc. set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including 15mm thick screed bed of cement mortar (1:6) etc complete all as specified and as directed.

All as per item No 15 above but as in skirting/ dado etc with 10mm backing in cement mortar 1:4 complete all as specified and directed.

M&L for coloured/ printed glazed/ charged/ double charged ceramic tiles 300x450x6 to 7mm thick, in floors/ walls skirting/ dado etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles including rendering 10mm thick in CM 1:4 complete all as specified and directed.

M&L for 10 to 12mm thick full body vitrified non skid, colour mahroon/ dark shade/ double charged/ ultacharged ceramic tiles (Square/ rectangular) polished, area of each tiles not exce 0.36 sqm, in floors/wall etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer 15mm thick mortar in CM 1:4 finished even and smooth for laying floor finishes complete all as specified and directed.

M&L for light shade vitrified ceramic tiles 10mm thick (square/ rectangular) polished area each tiles not exc 0.36 sqm in floor/wall etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15mm thick screed bed of cement mortar (1:6) complete all as specified and directed.

All as per item No 19 above but as in skirting/ dado etc with 10mm backing in cement mortar 1:4 complete all as specified and directed.

Demolition stone slabs and tiles of any description or thickness in laid bedded and pointed in any mortar floors, aprons etc and disposal of rubbish outside of MD land complete all as specified and directed.

S&F pre-polished granite 20mm thick fixed on platform/ shelves over 20mm thick screed bed in cement mortar 1:6 including necessary moulding etc complete all as specified and directed.

Dismantling of ceiling boards (fibre, pulp, insulation etc) or insulation boards/ blankets any thickness, including cover fillets/ GI SNAP GRID/ POP ceiling etc complete all as specified and directed.

S&F 5mm thick colour/ printed designer PVC wall/ ceiling sheet instips and channel feathered at the edges for fixing on solid PVC wall/ ceiling lining insulated PVC wall/ ceiling lining and solid PVC partition inclusive of solvent cement and fixing arrangements (suitable fillet, H-joint, U-end, J-edge, External corner and internal corner, horizontally, vertically or at any height and angle) at site, complete all as specified and directed. Note:- PVC wall/ceiling lining should be reversible, waterproof, washable, rib-reinforced, rigid, standard metal.

M&L for non-asbestos designer fibre cement building boards of size 595x595x4mm fixed or laid/ inserted to GI frame work with screws/clips as in ceiling laid flat or sloping complete all as specified and directed. Note:- GI frame work will be measured and paid for separately. Make:- Everest Oceanic Brand.

S&F GI framework for seamless ceiling of size 600mm x 600mm comprising of hot deep galvanized powder coated perimeter angle 0.43mm thick of size 24x24mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre, main runner Tee section 0.4mm thick with height 38mm and cross approx 1200mm centre to centre with GI cleat and steel expansion fasteners, including drilling holes for 4-6mm dia GI wire suspender and clips etc complete as per manufacturer's recommendations complete all as specified and directed. Note:- (i) Ceiling boards shall be measured separately. (ii) The grid system shall be as per specification of make as specified and directed.

M&L for POP board false ceiling 12/12.5 mm thick fixed in galvanised grid work including GI suspenders of 6 mm thick and joints of ceiling board shall be finished with textile tape etc complete all as specified and directed.

M&L for POP corners mouldings 150mm girth with screw on walls etc complete all as specified and directed.

M&L for preparing POP flase ceiling and applying two coat of Luster paint over a coat of primer as per recommended by manufacture etc complete all as specified and directed.

Excavating in trenches, not exc 1.5m wide and not exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exc 10 sqm on plan and not exc 1.5m in depth and getting out Soft/loose soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm complete all as specified and directed.

Removing excavated material not exc. 50m and depositing where directed at a level not exc. 1.5m above the starting point complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for, and disposal of rubbish outside of MD land complete all as specified and directed.

M&L for cement concrete type B-2, 1:2:4 as in foundation, filling and mass concrete (Using 40mm graded stone aggregate) complete all as specified and directed.

Dismantling timber scantling 40 Sqcm and over in section in any position unframed work complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Dismantling asbestos cement (corrugated, semi corrugated etc) sheet in roof covering complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering complete all as specified and directed.

M&L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps,cills, sunshades, shelves, lintels, etc.;and cutting chases for concealed cills, sunshades, shelves, lintels, etc. water tubing or concealed conduit wiring, etc. and making good, cutting exc 20cm girth complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 MPa as in weather boarding/ eaves board in approved design/ pattern/shape to match with existing adjacent water boarding/ eaves boards inclusive, as in ridges, hips, valley gutters, drip and straight and fixed with self tapping screw/nut bolt/normal GI screw/nail et as per site requirement and for entire completion of work at any height/ position complete all as specified and directed.

S&F acrylic corrugated/ plain sheet 3mm thick of any colour fixed as in roof covering/ cladding to wall etc, fixed with self tapping screws complete all as specified and directed.

Excavating in post holes (or similar holes) each not exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and as directed.

M&L for cement concrete type B-2, 1:2:4 as in foundation, filling and mass concrete (Using 40mm graded stone aggregate) complete all as specified and directed.

S&F Mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes for notching of wire, etc, flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F structural rolled mild steel as in roof trusses/post (framed), purlins crane gantries, rail and fastenings and heavy brackets framing etc (beam, tee, angle, channel or flat section) including distance pieces, cleats etc and similar work conforming to Fe 410-O or Fe 310-O complete all as specified and directed.

S&F framed work as in doors or gates of angle or other section with gusset plates, rails braces, etc. complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering running rails and guides) hanging; also fastening and fixing complete Fe 410 -W(Gde-E- 250) quality A complete all as specified and directed.

S&F Mild steel, plain, black sheet not less than 1mm thick as in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc as required complete all as specified and directed.

M&L for providing and applying Heritage Regular Granules homogeneous exterior wall textured surfce coating in mono or multi colour shades manufacture by "Backlite Hylam Limited" or equivalent, consisting of two components of dry regular granules (25 Kg pack) made of 92% silika particles coated with fade resistant pigment (primarily inorganic) and a 100% acrylic polymer bonding agent (05 Kg pack) with applied thickness of coating between 0.8 to 1.2mm in single coat on a curved even and smooth plastered surfaces without keying. Apply of coating on primed substrate uniformly, without voids with the help of trained applicator in accordance with the instructions of manufacturer and as per the direction of Engineer-in-Charge. It also inclusive of priming the surface as per manufacturerer's instructions.

S&F mild steel in wind ties/flat for roof including securing bolts, angle iron post and struts etc including cutting tops to shape as directed, drilling hole, notching for wire etc, flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc and similar work conforming to Fe 410-O or Fe 310-O complete all as specified and directed.

S&F Steel work in tubular trusses / post including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 complete all as specified and directed.

M&L for PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in roof kerbs or mud stops rounded or chamfered on edges, coping complete all as specified and directed.

M&L for preparation new/ old or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over and including one coat of red oxide zinc chrome primer complete all as specified and as directed.

M&L for preparation of old steel surfaces of any description over 10cm width or girth & applying two coats of synthetic enamel paint complete all as specified and directed.

S&F GI tubing 15mm bore medium grade with all fittings and fixed to wall with clamps including taking up or down existing GI tubing complete all as specified and as directed.

S&F GI tubing 20mm bore medium grade with all fittings and fixed to wall with clamps including taking up or down existing GI tubing complete all as specified and as directed.

S&F in repairs PVC(SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to wall with necessary clamps complete all as specified and directed.

S&F in repairs PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints fixed to wall with necessary clamps complete all as specified and directed.

S&F in repair PVC (SWR) Bends any radius for 110mm bore complete all as specified and directed.

S&F in repair PVC (SWR) Bends any radius for 75mm bore complete all as specified and directed.

S&F in repair PVC (SWR) branch piece single Y equal or unequal for 110mm bore complete all as specified and directed.

S&F in repair PVC (SWR) branch piece single Y equal or unequal for 75mm bore complete all as specified and directed.

S&F curtain rod with a telescoping brackets (Fancy type)to fit both rod and mounting hardware modular type complete all as specified and directed.

S&F in repairs vitreous china white squatting pan "Orissa Pattern" size 580x440mm, with integrated foot rest (excluding flushing cistern, flush pipe etc) including making good to floor complete all as specified and directed.

S&F in repair white Vitreous china wash down water closet pan (pedestal pattern) including plastic water closet seat, white/black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device including flush pipe and fixing bolts (excluding flushing cistern) etc complete all as specified and directed.

S&F in repair PVC valve less symphonic action type flushing cistern 10ltr capacity low level, white/coloured with inlet ball valve float and handle including bracket (including Taking down old cistern) and fixing of PVC flush pipe 32mm dia and PVC connection pipes complete all as specified and directed.

S&F in repairs wash hand basin (flat back or angle back) of size 550 x 400mm white including waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed pipe, chain and plug, porcelain stopper including for & pinning in ends of brackets including supply & fixing of waste pipe complete all as specified and directed.

S&F wash basin oval type (56x41cm) complete all as specified and directed. Make : Hindware, CERA, Prayag

S&F in repair Vitreous china urinal, half stall pattern, white including with urinal spreader, connections flush pipe and waste pipe etc complete all as specified and directed.

S&F in repairs cabinet mirror 400x 500 mm for bathrooms complete all as specified and directed. Make: Prayag (Cat Part No 551)/ Jaquar/ Hindware/ Parryware.

S&F in repair glass shelf 500x125mm with brackets complete all as specified and directed. Make:- Prayag (Cat No BEA-45)/ Jaquar/ Hindware/ Parryware.

S&F as in repair corner glass Shelf (with Bracket) assemble consisting of 5.5mm thick sheet glass shelf with chromium plated bracket guard and railing complete all as specified and directed. Make:- Jaquar (Cat No ACN-1173)/ hindware/ Parryware.

S&F in repairs single lever tall boy with 155mm extension boby fixed Spout without popup waste system with 600mm long Braided hoses complete all as specified and directed. Make:- Jaquar (Kubix Prime Cat No:KUP-35005 BPM)/ Hindware/ Parryware.

S&F in repairs 2 way bib cock with wall fange with necessary fittings complete all as specified and directed. Make:- Jaquar (Kubix Prime Cat No:KUP-35041PM)/ Hindware/ Parryware.

S&F in repairs angular stop cock with wall flange complete all as specified and directed. Make:- Jaquar (Kubix Prime Cat No:KUP-35053PM)/ Hindware/ Parryware.

S&F Hand shower (health Faucet) with 1 Meter Long Easy Flex Tube in Chrome Finish & wall Hook complete all as specified and directed. Make:- Jaquar (Cat No ALD-565)/ Hindware/ Parryware.

S&F in repairs towel rack 600mm long with Lower Hangers, Stainless Steel complete all as specified and directed. Make:- Jaquar (Cat No AKP-35781PS)/ Hindware/ Parryware.

S&F Towel ring square fixed to walls with chromium plated (CP) brass screws complete all as specified and directed. Make:- Jaquar (AKP-35721P)/ Hindware/ Parryware.

S&F Single Towel Rail 600mm Long, Stainless steel fixed to walls with chromium plated (CP) brass screws complete all as specified and directed. Make : Jaquar (AKP-35711PS)/ Hindware/ Parryware.

S&F in repairs Double Arm Wall Mounted Reversible Plain / Magnifying (X3) Pivotal Mirror complete all as specified and directed. Make: Jaquar (Cat No ACN-1193N)/ Hindware/ Parryware

S&F in repairs bowl for coupled WC with UF soft close seat cover, Hinges, fixing accessories set and Accessories set, size 365 x 630 x 750mm, P Trap-180mm (Jaquar Cat No FNS-WHT-40751S) and cistern with cistern fittings for 40751P&S (Make: Jaquar Cat No - FNS-WHT-40201/ Hindware/ Parryware) complete all a specified and directed.

S&F in repairs Rimless Wall Hung WC with PP soft close seat cover, Hinges, Set, Size: 380x515x360 mm including with Single Piece Slim Concealed Cistern with Floor Mounting Frame, Installation Kit and “S-Type” Drain Pipe Connection Set for Wall Hung WC complete with all accessories as specified and directed. Make: Jaquar (Cat No-CNS-WHT-963SPP & JCS-WHT-2400FP)/ Hindware/ Parryware.

S&F corner shower enclosure with one fixed glass and openable door on the front and one fixed glass on the side covered with a roof on the top (Glass thickness: 8mm /10mm) Chrome finish Height: 2100mm Width: 2401-2800mm including with all necessary fittings complete all as specified and directed. Make: Jaquar (Cat No - JSE-CHR-140ST2428H21) (Model No. 1840-S / 1140-S) / Hindware/ Parryware.

S&F in repairs soap dish recessed type (Stainless Steel) complete all as specified and directed. Make: Jaquar (Cat No AHS-1531)/ Hindware/ Parryware.

S&F in repairs soap dispenser with glass bottle complete all as specified and directed. Make: Jaquar (Cat No AKP-35735P)/ Hindware/ Parryware.

S&F in repairs tumbler holder complete all as specified and directed. Make: Jaquar (Cat No AKP-35741P)/ Hindware/ Parryware.

S&F in repairs W.C. brush holder complete all as specified and directed. Make: Jaquar (Cat No AKP-35743P)/ Hindware/ Parryware.

S&F in repairs Paper Holder with Flap Recessed type (Stainless Steel) complete all as specified and directed. Make: Jaquar (Cat No AHS-1553)/ Hindware/ Parryware.

S&F in repairs Grab Bar (Stainless Steel) 300mm Long complete all as specified and directed. Make: Jaquar (Cat No AHS-1501) / Hindware/ Parryware.

S&F in repairs wall Mixer 3-in-1 System with Provision for both Hand Shower and overhead Shower Complete with 115mm Long Bend Pipe, Connecting Legs & Wall Flange (with Hand & Overhead Shower) complete all as specified and directed. Make: Jaquar (Cat No COP-281PM)/ Hindware/ Parryware.

S&F in repairs Vitrous china wash basin, size 500x420x190mm, table top type fixed in granite or table complete all as specified and directed. Make: Jaquar (Cat No-FLS-WHT-40931)/ Hindware/ Parryware.

S&F aluminium (powder coated ) three track sliding window comprising of one fly proof shutter and two glazed shutters with frames of size 92.0mm x 31.75mm x 1.30mm thick and shutter frames of size 40mm x 18mm x 1.55mm thick with necessary joining cleats, glazing clips, rubber gasket, anodised aluminium snap beading and connected locking arrangement and with aluminium (anodised) grill made out of 7mm wide flat, square, rectangular or similar section, fixed with channel of size 38mm x 12 mm x 13mm (Section 8778) complete all as per manufacturer's catalogue 7 specifications complete all as specified and directed. Notes:- (i) Glass filling in panels of windows and aluminium wire mesh/wire cloth shall be deemed to be included in the quoted rate for the item; (ii) Aluminium alloy wire cloth in panels of wire gauzed shutter shall be 0.45 mm nominal dia of wire and avg width of aperture 1.40 mm, fixed with aluminium wire staples; (iii) Glass filling in panels of glazed shutter shall be 5 mm thick tinted sheet glass of approved make and shade/tint Make: Grill No. 20 of 'DECO GRILL' or equivalent. Make of Aluminium Sections powder coated:- Jindal or equivalent.

M&L for 10 to 12mm thick froasted toughend tinted/plain glass fixed to door or as partition or any other location including with brackets, supports, handles, lock , bottom machine and other accessories as required complete all as specified and directed.

M&L for 7-8.3mm thick laminated wooden flooring (including with all fixing arrangements) high density core grade AC4 (As per classification EN 13329) advance high dencity click system fixed over rubber sheet cushioning as per manufacturer's instructions complete all as specified and directed.

S&F in repairs bib tap 15mm dia cast copper alloy chromium plated fancy type with crutch or butter fly handle screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F 15 mm dia pillar tap, cast copper alloy, with capstan heads, chromium plated screwed down high pressure with or without lettered Hot or Cold with screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F 15mm bore pillar cock swan neck brass CP screwed for iron pipe including taking down existing one complete all as specified and directed. Make: Prayag cat No 7814 or equivalent

S&F in repairs chromium plated shower rose with or without swivel joints of 125mm dia incl fixing to 15 mm bore of pipe complete all as specified and directed.

S&F in repair Stop valves/ angle cock, cast copper alloy, screwed down, high pressure, with crutch or butterfly handles, screwed both ends for iron pipe or for unions and fixed fancy type chromium plated complete all as specified and directed.

S&F in repair two way angle cock, cast copper alloy, screwed down, high pressure, with crutch or butterfly handles, screwed both ends for iron pipe or for unions and fixed fancy type chromium plated complete all as specified and directed.

S&F in repairs Urinal spreader of brass chromium plated for fixing with 15mm dia pipe complete all as specified and directed.

S&F in repair toilet paper holder complete all as specified and directed. Make:- Prayag Cat part No BA-48 or equivalent.

S&F in repair health faucet of 15mm bore brass chromium plated including PVC pipe to connection to GI tubing pf 15mm bore complete all as specified and directed. Make: Prayag cat no BEA-40.

S&F grating doom with/ without waste hole 125mm dia of chromium plated complete all as specified and directed.

S&F in repairs waste fittings, 32/40mm brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S&F in repairs soap dish, CP 125mm size fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F in repair PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repairs flush pipe of polythene of low or high density 32mm PVC for low level flushing cistern complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks, triple layer, ISI marked (cylindrical vertical with closed top) of 500ltr capacity, hoisted and fixed in position including dismantling as specified in SSR Part I complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks, triple layer, ISI marked (cylindrical vertical with closed top) of 1000ltr capacity, hoisted and fixed in position including dismantling as specified in SSR Part I complete all as specified and directed.

Disconnecting existing tanks of capacity exc 250 & not exc 500 Ltrs, setting aside (or lowering if required) for repairs, cleaning, etc and hoisting if required reconnecting and re-fixing in position including cleaning and removing all the scale and dirt, etc from tank and from mouths of circulating pipes etc complete all as specified and directed.

All as per item No 112 above but capacity of tank exc 1000 & not exc 2000 Ltrs complete all as specified and directed.

S&F in repair 15/20 mm bore ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (Min wt 15mm-142 gms/20mm-210g) complete all as specified and directed.

S&F in repairs plastic water closet seat, back, closed pattern with flat bottom, cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs.73,395.00]

Meet Road Lines

Bidder Name

Meet Road Lines

M/s Jagdish Staioners and General Stores