Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹13.0 LAccepted-Finance ARAJI NO 311 OLD SHIVALI ROAD KALYANPUR KANPUR NAGAR U P | ₹13.0 L | L1 | Accepted-Finance L1 |
| 2 | L2₹13.1 LRejected-Finance | ₹13.1 L | L2 | Rejected-Finance L2 |
Updated dates
Tender Value
₹17.5 L
EMD Value
₹1.8 L
Closing Date
26 Mar 2026, 12:00 pmClosed
Executive Engineer, PD, PWD, Kanpur Nagar
Executive Engineer, PD, PWD, Kanpur Nagar
Sadh Sarsaul to Rasoolpur Jajmau road By Hot Mix Plant
2026_CEKNP_1115271_35
259/11A Date 28.01.2026
Open Tender
Civil Works - Roads
60 days
Kanpur Nagar
Please refer Tender documents.
2 documents required · 2 mandatory
₹1,119
₹1.8 L
Yes
Executive Engineer, PD, PWD, Kanpur Nagar
7 Apr 2026
19 Mar 2026
26 Mar 2026
19 Mar 2026
26 Mar 2026
19 Mar 2026
20 Mar 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1WBM Grading 3 Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405. (A) By Manual Means | |||||
| 2Tack Coat (i) Providing and applying tack coat with Bitumen VG-10 using bitumen distributor at the rate of 0.30 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503.Clause 503. MORD. (By Departmental Hotmix Plant) | |||||
| 320mm thick Open-Graded Premix Carpet using Bituminous (penetration grade/modified bitumen) Binder Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type C as per Technical Specification Clause 508. Case - II By Mechanical Means (HMP 30/40) (I). Bitumen VG-10 (By Departmental Hotmix Plant) | |||||
| 4Seal Coat Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C as per Technical Specification Clause 510 Case - III : Type C By Mechanical Means (HMP 30/40) (I). Bitumen VG-10 (By Departmental Hotmix Plant) | |||||
| 5Construction of Subgrade and Earthen Shoulders Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1.. | |||||
stage.html
html • 0.03 MB
techsummary_2102659.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.71 MB
Tendernotice_2.pdf
PDF • 1.63 MB
BOQ_2102659.xls
BOQ • 0.32 MB
Download all tender documents and submit your bid