Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹38.3 LAccepted-AOC | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹39.9 L+₹75,989.34 (1.94%)Rejected-Finance | L2 | Rejected-Finance Other than lowest bidder | |
| 3 | L3₹42.5 L+₹3.3 L (8.40%)Rejected-Finance 23 6 C LAL VIHAR EAST END BAMRAULI PRAYAGRAJ 211012 U P | PRAYAGRAJ | UTTAR PRADESH | 211012 | L3 | Rejected-Finance Other than lowest bidder | |
| 4 | L4₹42.8 L+₹3.6 L (9.16%)Rejected-Finance | L4 | Rejected-Finance Other than lowest bidder | |
| 5 | L5₹43.4 L+₹4.2 L (10.7%)Rejected-Finance 86 MAHEWA EAST NAINI PRAYAGRAJ U P | PRAYAGRAJ | PRAYAGRAJ | UTTAR PRADESH | 211008 | L5 | Rejected-Finance Other than lowest bidder |
Tender Value
₹43 L
EMD Value
₹86,000
Closing Date
25 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Bamrauli
GE (AF) Bamrauli
COMPREHENSIVE REPAIR / MAINT IN NEW PROJECT, TECH AREA, OMQ AND SMQ AT MAP AND REPAIR TO DOOR, WINDOW, CUPBOARD, GLASS PANES, WIRE MESH AND ALLIED WKS AT AIR ENCLAVE, TECH AREA, NEW PROJECT QTRS AND SOUTH CAMP QTRS UNDER GE(AF) BAMRAULI
2023_MES_578729_1
8767/E8
Open Tender
Civil Works
Works
270 days
GE (AF) Bamrauli
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
GE (AF) Bamrauli
₹86,000
27 Mar 2023
2 Feb 2023
27 Feb 2023
2 Feb 2023
25 Feb 2023
18 Feb 2023
Amount
Resecuring or easing & adjusting, without taking down, shutters of any description not exceeding 1 Sqm complete.
Refixing shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each in the same opening after taking down, easing and adjusting including refixing builders hardware as required and renewal of unserviceable screws complete.
S&F in repair aluminium alloy, anodised, sliding door bolt 300 mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete.
S&F in repair aluminium anodised barrel tower bolts of extruded section, 200 mm long complete.
S&F in repair aluminium anodised barrel tower bolts of extruded section, 150 mm long complete.
S&F in repair hasp and staple 100 mm size, safety type, aluminium anodised including bolt to hinge plate, fixed with screws complete.
S&F in repair extruded aluminium alloy handles, fabricated type, anodised, 150 mm size complete.
S&F in repair stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete.
Hacking out old broken glass (any thickness, size, quality or description) from metal frames, glazed with putty or fixed with beads complete.
S&F sheet glass 4.8 mm, ordinary quality and glazing with oil putty in square not exc 0.5 sq. m in each pane fixed with rubber beeding complete.
S&F sheet glass 4.8 mm, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane fixed with rubber beeding complete.
M&L for sheet glass ordinary quality3.0 mm thick and glazing with oil putty not exe 0.50 sqm in each pane complete all as specified and directed.
S&F in repair fancy type glass corner shelf with CP brackets etc complete all as specifed and directed.
S&F in repair sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete.
S&F in repair mild steel curtain rods with PVC lining 20mm dia complete all as specifed and directed.
S&F in repairs curtain rod holder and stops brackets mild steel with PVC lining matching with the curtain rod complete all as specifed and directed.
S&F in repair curtain rods 20 mm bore, mild steel, chromium plated with fixing brackets, stops, rollers etc.
Material and labour rubber bead/seal 40mm wide and 3-4mm thick to cover doors/window gap fixed with nails and make good to doors as in repair complete all as specified and directed.
Taking down existing aluminium windows exc. 1.50 Sqm and not exc. 2.0 Sqm and re-fixing the same after minor repairs etc. replacement of rubber beading and aluminium strips etccomplete.
S&F in repair floor door stopper 140mm, of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete.
M&L for Tuck welding in repair not exceeding 2.5cm in length of metal n exc 6mm thick complete.
M&L for Running welding in repairs not exceeding 6mm thick of metal to be welded in existing items etc complete.
Taking down shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each complete.
S&F flush shutters 35 mm thick, solid core construction, with block board core and ply wood face panels, commercial type on both sides complete.
S&F butt hinges, medium weight, cold rolled mild steel, 100mm size complete.
S&F aluminium alloy, anodised, sliding door bolt 250 mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete.
S&F in repair Mild steel wardrobe hooks 150 - 200 mm length, complete.
S&F in repair 300 mm, ordinary rat tail rod pattern springs of mild steel including roller and roller plate complete.
S&F in repair brass mortice lock, vertical type, size 100 mm, 4 levers complete.
S&F 150mm size in repair 7 lever super night latch single bolt, fixed in inside side of door shutter make godrej complete.
S&F in repair 17-19mm thick Prelaminated MDF Board, interior grade, prelaminated both side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete.
S&F in repair12 mm thick MDF board, medium density, flat presseed fixed with screws to timber frame work etc complete.
S&F stainless steel magnetic catcher complete.
S&F telescopic channel of Mild steel in kitchen and warddrobe drawers of size of 30cm to 45cm in length fixed with screws etc complete.
S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished, brass polished complete.
S&F continuous (piano) hinges 40mm wide, mild steel, bright finish or electrogalvanised complete.
S&F 2 lever wardrobe lock,verticle type of 50mm in size complete.
S&F in repair 32 mm dia PVC flush pipe for low level flushing cistern to pedestal/squatting pan including all fittings complete.
S&F in repair bib tap standard of PTMT any colour high pressure screwed for iron pipe of 15 mm bore, fancy type (minimum weight 105 gms) complete.
S&F in repair bib taps cast copper alloy chromium plated with crutch or butterfly handle, fancy type, screwed down, screwed for iron pipe or for brass ferrule 15mm bore complete.
Repair only to CP long body bib taps , pillar tab etc of any make by replacing spindle,nippule ,washer etc at any size etc complete all as specified and directed.
S&F in repair two way fancy type mixer pillar tap hot and cold, 15mm dia size with Screwed down high pressure,screwed both ends for iron pipe or for unions and fixed complete.
S&F in repair brass chromium plated shower rose 125 mm size with swivel joints, fixed in repairs complete.
S&F in repair jet spray with flexible pipe and holding screw other fittings etc complete.
S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including supply & fixing cantilever brackets of mild steel angle 35 x 35 x 5 mm and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete.
S&F in repair PVC waste pipe of 32mm dia suitable for WHB/kitchen sink complete all as specifed and directed.
S&F in repair Stainless steel plate rack of size 600x750x250mm complete.
S&F in repair Stainless steel plate rack of size 780x900x250mm complete.
S&F rotational moulded polythene water storage tanks, hoisted and fixed in position 500 ltrs capacity including 2 Nos GI union, checked nut and 25mm PTMT float Valve, overflow and washout GI medium grade pipe 15mm dia,Nippule complete all as specified and directed including Dismantling of old PVC tank and removing to store
S&F rotational moulded polythene water storage tanks, hoisted and fixed in position 1000 ltrs capacity including 2 Nos GI union, checked nut and 25mm PTMT float Valve, overflow and washout GI medium grade pipe 15mm dia,Nippule complete all as specified and directed including Dismantling of old PVC tank and removing to store
Cleaning and removing all scale and dirt, etc from water tanks of capacity exceeding 250 litres but not exceeding 500 litres and from mouth of circulating pipes, etc complete.
Cleaning and removing all scale and dirt, etc from water tanks of capacity exceeding 500 litres but not exceeding 1000 litres and from mouth of circulating pipes, etc complete.
S&F in repair ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of 25 mm bore (minimum weight 455 gms) complete.
S&F in repair ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of 40 mm bore (minimum weight 690 gms) complete.
S&F in repair PVC cover (Lid) for OHT of capacity 500 Ltr complete.
S&F in repair PVC cover (Lid) for OHT of capacity 1000 Ltr complete.
Labour only opening of air lock in toilets/ bath and kitchen of GI pipe of any dia but excluding fittings complete.
Taking up or down 15 mm dia steel tubing and connections including cleaning for refixing or removal to store complete.
Supply and fixing 15 mm bore galvanised steel water tubing 'medium grade' with all fittings and fixed to walls, ceiling or laid in floors etc. complete all as specified and directed.
Taking up or down 20 mm dia steel tubing and connections including cleaning for refixing or removal to store complete.
Supply and fixing 20 mm bore galvanised steel water tubing 'medium grade' with all fittings and fixed to walls, ceiling or laid in floors etc. complete all as specified and directed.
Mild steel chromium plated grating 100 mm dia, fixed in repairs to Nahani traps complete.
Mild steel chromium plated grating 125 mm dia, fixed in repairs to Nahani traps complete.
S&F in repair Tubular towel rail 20mm dia, 600mm long of brass, chromium plated complete.
S&F in repair towel ring 20mm dia of CP fixed with and including Chromium plated brass screws and wooden/plastic cleats complete.
S&F in repair Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete.
S&F in repair PVC connections 15mm size with PTMT nuts of length 600mm complete.
S&F in repair PVC (SWR) floor trap, plain with grating including jointing with solvent cement, dia of outlet 75 mm complete.
Supply and fixing in repair vitreous china squatting pan Orissa pattern, size 580 x 440mm, (excluding flushing cistern & flush pipe fixed including connection to trap and to flushing pipe,anti sphonage pipe etc.) making good the disturbed surfaces and to match with existing surface all as specified and completed.
Supply and fixing(in Repair) vitreous china wash down water closet (pedestal pattern) white (excluding flushing cistern and flush pipe) and P or S trap including connection to drain (or outgoing pipe) and to flushing pipe anti-syphonage pipe etc complete all as specified and directed. including plastic water closetseat closed pattern with flat bottom and cover and mild steel chromiunm plated or aluminum hinging device.
Supply and fixing(in Repair) Vitreous china premium/ 1st quality wash down water closet wall hung EWC white/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket etc. (excluding flushing cistern & flush pipe) complete in all respect all as specified including plastic water closet seat closed pattern with flat bottom and cover and mild steel chromiunm plated or aluminum hinging device.
Supply and fixed in repair One piece Vitreous china wash down water closet (Pedestal Pattern) size 645mmx350mmx730mm 'white' with soft close seat cover & twin flush fittings, toilet paper holder, health faucet, PVC connection, angular stop cock (valve) (2 Nos) with flange etc all as specified in Particular specifications. Note : Vitreous china wash down water closet (Pedestal Pattern) cat Part No. CURATOR S1013132 S trap 250mm of 'Cera' or equivalent model of make specified in Appendix 'B' to particular specifications.
S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete.
Supply and fixing (in Repair) vitreous china wash hand basin, white, flat back, size 580 x 450mm excluding taps, waste, chain and plug and porcelain stopper but including pvc connection pipe of 450mm length, waste coupling of 32mm dia of PTMT, MS brackets including cutting for and pining in ends of brackets complete.
S&F in repair mild steel angle iron bracket with 25x25x3mm angle iron for WHB including refixing of WHB, steel painting and making good disturbed surface complete.
S&F in repair PVC low level flushing cistern 10 litres capacity, white, with all fitting and fixtures including brackets and 32 mm bore PVC flush pipe, complete.
Removing and refixing of bottle trap from WHB after cleaning and removing all blockages etc. Complete.
Supply & Fixing in Repairs PVC Syphon kit suitable for PVC Cistern complete
Resecurring of syphon kit by minor adjustment and replacement of syphon washer etc. Complete.
S&F in repair 32mm bore waste fittings of brass CP for glazed ware sinks,basin etc with long screwed shanks , and fly nut flange end bedded in red lead cement and other end fixed complete.
S&F in repairs three way wall mixer with provision of over head shower with L bends connecting legs & wall flanges incl nipples complete
Repair only to wall mixer of any make by replacing L-bends & connecting legs, nipples etc complete
S&F (in repairs) Soap dish, vitreous China white, approximate size 160x 160x90mm fixed to plugs with chromium plated brass screws complete.
Taking down cement or cement lime plaster, any description, on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc complete.
M&L for washed stone grit plaster on exterior walls in two layers, under layer 12 mm cement plaster 1:4 (1 cement 4 coarse sand) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15 mm cement plaster 1:1/2:2 (1 cement : 1/2 coarse sand : s stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete. Note: Payment for providing grooves shall be made separately.
M&L for forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete.
M&L for rendering 15mm thick in cement mortar 1:6 on faces of brick work or concrete surfaces, finished fair and even complete.
M&L for rendering 15mm thick in cement mortar 1:4 on faces of brick work or concrete surfaces, finished fair and even complete.
M&L for rendering 10 mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished fair & even complete.
M&L for preparing new plastered or unplastered surfaces of walls and applying two coats of distemper oil emulsion with roller brush, white or tinted over & including alkali-resistant cement primer complete.
M&L for preparing new plastered or unplastered surfaces of ceiling and applying two coats of white wash complete.
M&L for preparing new plastered or unplastered surfaces of walls and applying two coats of cement paint white or tinted with roller brush over & including a coat of cement wash with white cement complete.
M&L for complete removal of existing treatment on walls (any number of layers) by scrapping with steel scrappers or any other means, applying two coats of distemper, oil emulsion white or tinted over and including one 2mm thick wall care putty complete.
M&L for preparing old decorated plastered or unplastered surfaces of walls and applying one coat of distemper oil emulsion, white or tinted with roller brush complete.
M&L for preparing old decorated plastered or unplastered surfaces of ceiling and applying one coat of distamper oil emulsion complete.
M&L for preparing old painted surfaces of wood and wood based materials of any description over 10cm in width or girth and applying one coat of synthetic enamel paint complete.
M&L for preparing old painted steel & iron surfaces of any description over 10cm in width or girth and applying one coat of synthetic enamel paint complete.
Demolition of brickwork built in cement or cement lime mortar complete.
M&L for brick work with sub class ‘B’ old size bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 complete.
Dismantling of stone slabs, and tiles of any description or thickness in floors aprons etc including cement mortar bedding (but not backing), removing un-serviceable tiles to store and rubbish off the premises
M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80mm thickness M-40 grade with Grey cement and pigment including laiying over 30mm sand cousion complete all as specified and directed
All as above Srl item No. 103 item but except interlocking tiles complete.
M&L for 18-20mm thick Green marble (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of marble complete.
Dismantling floor hearth or wall tilling including cement mortar bedding , removing serviceable tiles to stack and rubbish off the premises for minor repair to floor tiles/ nahani traps and repair to concealed stop cock and GI tubing in wall etc in patches. complete.
M&L for Non Skid ceramic tiles coloured 300mmx300mmx 7 to 8 mm thick(square/ rectagular) area of each in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed layer in CM (1:6) for lying floor finish etc (1st quality/Premium Quality) complete.
M&L for Non Skid ceramic tiles coloured 10 mm thick(square/ rectagular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed layer in CM (1:6) for lying floor finish etc (1st quality/Premium Quality)
M&L for Non Skid ceramic tiles coloured 10 mm thick(square/ rectagular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed layer in CM (1:6) for lying floor finish etc (1st quality/Premium Quality)
M&L for Glazed ceramic coloured tiles in vertical surface 450x 350x7 mm thick tiles set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade tile over and inclduing 10mm thick rendering in CM (1:4) complete etc. (1st quality/Premium Quality).
M&L for vitrified ceramic tiles 10mm thick dark shade (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid in floors set and jointed as per manufacturer's instructions Over & including screed bed or bedding layer 15mm thick in CM (1:6) complete.
M&L for filling white cement on floor/wall tiles joints including removing old fillings etc complete.
Demolition of concrete of any description and in any position complete.
Material and labour for PCC 1:2:4 using 20mm graded aggregate as in PCC benching at junction of tiles , parapets and filling hollow section of pressed steel of suitable size complete.
Taking down PVC soil, waste and rain water pipes (any size or pattern) including all fittings, heads, shoes, bends, swan-necks, bends etc. Complete.
S & F 110 mm dia PVC (SWR) rain water pipes, single socketed, fixed to walls with and including MS clamps complete.
S & F 75 mm dia PVC (SWR) rain water pipes, single socketed, fixed to walls with and including MS clamps complete.
Supply and fixing 110mm PVC (SWR) bends of any radius complete.
Supply and fixing 75mm PVC (SWR) bends of any radius complete.
Supply and fixing 110mm PVC (SWR) junction single T equal or unequal with acccessible door complete.
Supply and fixing 110mm PVC (SWR) vent cowl complete.
Supply and fixing 75mm PVC (SWR) vent cowl complete.
S&F UV plastic sheets including fixing with screws on wall make reoxlite complete.
All as per item No 123 above but except UV plastic sheetscomplete.
Supply and filling of Adhesive Silicon sealent in all types of windows/ Ventilator cill or in any gap/joint etc complete.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.
S&F in repair 15 mm fancy type stop valves, castcopper alloy,screwed down,high pressure,with crutch or butterfly handle,screwed both ends for iron pipe or for unions and fixed all as specified and directed
M & L for taking down cement plaster on brick work or concrete surfaces incl racking out joints, hacking for key scrubbing down with water etc and rendering 10 mm thick in ready mix cement plaster 1: 4 on fair faces of brick masonary or concrete surfaces of walls mixed with water proofing compound (ISI Marked) @ 3% by weight of cement or as per manufacturer instructions, finished even and fair complete all as specified and directed after applying one coat of smart care damp guard/block 2K of Make :- Asian paints / Dr. Fixit or equivalent as approved by GE.
S&F in repair towel rack 600mm long and 20mm dia of CP fixed with and including Chromium plated brass screws and wooden/plastic cleatscomplete all as specified and directed. Make Prayag Cat No BA-42
Fixing only in repair wash down water closet any pattern making minor repair like changing washer complete all as specified and directed .
M&L for brooming down plastered/unplastered old decorated surface of wall incl cornice etc and applying one coat of white wash complete all as specified and directed.
All as per item No 131 above but on ceiling
M&L for Preparing old decorated plastered or unplastered surfaces of wall including cornices, pilasters etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and treating oil and greasy spots and applying one coat of weather proof paint (Exterior emulsion paint) complete all as specified and directed. (Paint shall be Apex Ultima of Asian Paints)
M&L for Preparing old decorated plastered or unplastered surfaces of walls, wall projection, face of chajja, projected face of roof slab and face and sides of sunshade etc. by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and treating oil and greasy spots and applying one coat of weather proof paint (Exterior emulsion paint) in camouflage pattern (two or more combination). design, pattern and colour shall be as approved by GE or as per existing complete all as specified and directed. (Paint shall be Apex Ultima of Asian Paints)
Taking down alluminium door completely and refixing in the same opening after adjusting the floor spirng / adjusteing the screws for easy moving and making functional by changing rubber beading to glass/board all as specified and as directed
S&F in repiar 18mm thick celuka PVC sheet minimum 600 Kgbm density grade 1 quality of both side plain white colour rigidlam glossy finish fixed with screws, solvent cement/adhesive as per manufacturer instructions to make kitchen cabinet sides top and bottom and shelves inside the cabinet complete as per specifications and as directed by the Engineer-in-Charge. Note:- (i) Cup board accessories ie fittings, handles, hinges, will be measured and paid under this schedule. (ii) Quoted rates deem to be include fixing of cabinet on wall with appropriate rawl plug/ dash through fastener (hammer type). (iii) Fabrication and installation of cabinet to be carried out by authorised vendor of manufacturer only.
S&F in repair 18mm thick celuka PVC sheet minimum 600 Kgbm density grade 1 quality one side pre-laminated and other side plain white colour to make kitchen cabinet/drawer shutters fixed with screws, solvent cement/adhesive as per manufacturer instructions complete as per specifications and as directed by the Engineer-in-Charge. Note:- (i) Cup board accessories ie fittings, handles, hinges, will be measured and paid under this schedule. (ii) Quoted rates deem to be include fixing of cabinet on wall with appropriate rawl plug/ dash through fastener (hammer type). (iii) Fabrication and installation of cabinet to be carried out by authorised vendor of manufacturer only.
S&F Double action floor spring hydraulically regulated made up of minium 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, covering pivot made of brass, other made of mild steel heavy futy and fixed
Dismantling of plain or corrugated steel sheeting any gauge thickness including nainital or similar pattern all as specifed and directed
S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensil strength of 550 Mpa as in roof covering to wall fixed with self tapping screws as specified.
M&L for Precast cement cement concrete louvers and jallies type BO 1:2:4 (12.5 mm Graded aggregate),25 mm thick (measured solid),including all mould-ings but excluding frames set in cement mortor 1:6 (precast frame shall be measureed separately all as specified and directed
M&L for steel work in tubular trusses including special shaped washers etc . Complete using ERW or induction butt welded tubes conforming toIS 1161 -1979 grade St 240
S&F frame work such as guard bars etc with ends of bars shouldered and or welded or forged into spikes etc and similar works conforming to Fe-310-0 .complete all as specified
S&F in repair venation blinds vertical type, level or ultima 100mm width of strip with necessary pulling threads aluminium channel along with all arrangement fixed to wall complete all as directed ( Make : Vista or equvalent).
S&F in repair for aluminium anodised window openable/fixed type/sliding type weighing not less than 1.35 Kg/RM including 5mm thick glass fixed with rubber gasket. The aluminium member of shutter is 65x40mm alongwith aluminium handle & tower bolt etc complete in all as specified and directed.
S&F in repair aluminium anodized grills powder coated with 6x5mm aluminium section having square gap of 100mm thick with fixing rails of channels 12-15mm complete all as directed.
S&F in repair for aluminium anodized door (Partly paneled and partly glazed ) with 4.5 mm thick plain glass sheet and 12mm particle board interior grade both side laminated) and aluminium section weight not less than 0.55 kg/RM with self closing hydr4aulic door closer complete with all fitting complete all as specified and directed.
S&F steel window with side hung shutter incl projecting type hinges with steel handle & peg stay with glazing bars dovetailed and welded etc complete all as specified and directed.
S&F in steel window with side hang shutters incl box type hinges with steel handles and steel peg stay, complete without glazing bars dovertailed of welded complete all as specified and directed
S&F in repairs Toilet cabinet PVC with mirror and shelves (600x450) etc complete all as directed.Make:-Prayag
S & F in repair Toilet paper holder, vitreous China,box type complete all as specified and directed
Supply and fix in repair vitreous china wall hung wash hand basin with pedestal snow white miniumum size 630mmx450mm including chromium plated brass coupling, chromium plated brass centre hole basin mixer, 450 mm PVC braided connection (two numbers), angular stop cock ( valve) (two numbers) complete all as specified in particular specifications. Note : Vitreous china wall hung wash hand basin cat Part No. CONCORD S2040112, Pedestal cat part No S2090107 & chromium plated brass centre hole basin mixer cat part No F2002461 of 'Cera' or equivalent model of make specified in Appendix 'B' to particular specifications.
Taking down Chowkats or frames with shutter not exceeding 1.5 Sqm each (without taking off shutters from the frames)
Taking down Chowkats or frames with shutter exceeding1.5 Sqm but not exceeding 4 Sqm each (Without taking off shutters from the frames)
Taking down shutters of any description not exceeding 1 Sqm each.
Refixing of shutter in the same opening of any description n exceeding 1 sqm each.
S&F 2nd Hard wood, Plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue painted at joints.
S&F 35 mm thick 2nd class Hard wood of Glazed and skelton shutters, open rebated and prepared to receive glass, gauze,etc., divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing class etc, size of me-mbers of shutters as specified in SSR Part-I
S&F 35 mm thick factory made shutters, 2nd class Hard woodwood rail and style, plain framed,panelled shutter with out interloking rail with one panel of 9mm BWP Commercial ply or 12mm veneered particle board with commercial face veneers on both faces. The size of rail and stileas per SSR Part-I, kiln seasoned and chemically pressure treated all as specified.
S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging of Fe-410-W(Gde-E250 quality B) also fastening and fixing complete
S&F Steel ventilator with top hung shutter including hinges, steel peg stay etc, complete all as specified.
M&L for Mild steel work in bands straps,including bolts as in holdfasts and similar articles conforming to Fe-310-0,Fe-410-0 complete all as specified and directed .
M&L for Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0. (in Repair)
S&F 18-19 mm thick block board grade 2 quality interior grade quality, decorative type with decorative face veneer on one face as in cupboard shutters,shelves and pelmet boxes fixed with screw to timber frame work all as specified and directed.
S&F 125 mm Hasp and staple,aluminum anodised and fixed with screw
S & F 0.56 mm thick plain aluminium sheeting alloy 31000 H4 ridges hips, valley gutter, drip, and straight flashing fixed to doors.
Supply only 3mm thick sheet glass ordinary quality glazing with oil putty in metal or wooden beads in square n exc 0.5 Sqm in each pane all as specified and directed.
Supply only 3mm thick figured glass pin head type glazing with oil putty on metal frame or wooden beads in square n exc 0.5 Sqm in each pane all as specified and directed.
M&L for preparing new or previously untreated surfaces of wood or wood based materials of any description exc 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M&L for preparing new or previously untreated steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
S&F Harrision rails, anodised aluminum alloy chromium plated with fixing brackets stops, rollers etc.
M&L for preparing newly plastered surfaces of walls and applying three coasts of white wash
S&F for PVC cabinet frame of size 18mm x75mm made out of 18mm thick PVC board wood grain colour and frame shall be fixed with 50mm long steel screw inside using drilling machine and plastic fasteners Make : Rajshree or equivalent complete all as specified and directed.
S&F of PVC cabinet box and shutter made out of 18 mm thick one side PVC prelaminated wood grain board and shutter will be fixed on the PVC frame with auto hinges and steel screw including fancy type stainless steel handles complete all as specified and directed. Size of cabinet not more than 90 cm wide.
S&F 30 mm thick 2nd class Hard wood of Glazed and skelton shutters, open rebated and prepared to receive glass, gauze,etc., divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing class etc, size of me-mbers of shutters as specified in SSR Part-I
S & F 75 mm But Hinges, medium weight cold rolled mild steel and Fixed.
S&F for powder coating aluminium frame for doors, windows, ventilators ,partion etc with one or more rebates including joining cleat for fixing etc. complete all as specified. (minimum thickness of powder coating 50 micron).
Supply 4.8mm thick sheet glass ordinary quality any size and in any type of frame and glazing with rubber beading in square n.exc 0.5 Sqm in each panes complete all as specified and directed.
All as per item No.178 above but 4.8mm thick glass in square exc 0.5 Sqm in each pane –ditto-
M&L for double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover,governing pivot made of brass, other parts made of mild steel heavy duty and fixed including Taking down existing floor spring if required complete all as specified and directed
S&F in repair Aluminium) die cast body)Door closer hydrau lically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed
Note :- Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items of this schedule. The same shall be recovered from various payment to contractor before handing over old material.
M/s M A Traders
Pleiad Complex On
HIMANSHU TRADERS
MOHAMMAD RIZWAN CONTRACTOR
chauhan construction
M/S V K MEHROTRA
M/s DKS Engineering Works
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .