Loading
Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹14.4 LAdmitted-Finance | -10.20% | ₹14.4 L | L1 | Admitted-Finance |
| 2 | L2₹15.0 LAdmitted-Finance | -6.50% | ₹15.0 L | L2 | Admitted-Finance |
| 3 | L3₹15.2 LAdmitted-Finance GOVT CONTRACTOR 23 KM ROAD PREM NAGAR PORT BLAIR | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744102 | -5.00% | ₹15.2 L | L3 | Admitted-Finance |
| 4 | L4₹17.2 LAdmitted-Finance | +7.00% | ₹17.2 L | L4 | Admitted-Finance |
| 5 | L5₹17.8 LAdmitted-Finance | +11.00% | ₹17.8 L | L5 | Admitted-Finance |
Tender Value
₹16.0 L
EMD Value
₹32,074
Closing Date
29 Apr 2026, 3:00 pmClosed
EE SVPSD APWD SVP
EE SVPSD APWD SVP
Teak Wood Panelling in living and dining hall of DC Bungalow under AE-II, SVPSD
2026_APWD_22823_1
NIT No.04/EE/SVPSD/2026-27
Open Tender
Civil Works - Others
180 days
DC Bungalow Sri Vijaya Puram
Please refer Tender documents.
8 documents required · 8 mandatory
₹0
₹32,074
5 May 2026
24 Apr 2026
29 Apr 2026
24 Apr 2026
29 Apr 2026
24 Apr 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount | Item Code |
|---|---|---|---|---|---|---|
| 1Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below: 1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 nos. 2. Applying two coats of sealer with spray gun and allowing suficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs. 3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs. 4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. using melamine clear polish and melamine thinner mixed in required. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time.) | ||||||
| 2Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : | ||||||
| 2.1 | For fixed portion
Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) | - | kg | - | - | 4 |
| 3Providing and fixing 1st Class Teak wood plain lining tongued and grooved, including wooden plugs complete with necessary screws | ||||||
| 3.1 | 15 mm thick | - | sqm | - | - | 6 |
| 4Providing and fixing wooden moulded beading to with iron screws, plugs etc all complete as per the direction of Engineer-in-charge. | ||||||
| 4.1 | 1st class Teak wood cat-I (25 x 25 mm) | - | mtr | - | - | - |
| 4.2 | 1st class Teak wood cat-I (40 x 25 mm) | - | mtr | - | - | 9 |
| 4.3 | 1st class Teak wood cat-I (100 x 50 mm) | - | mtr | - | - | 10 |
| 5Providing and fixing wooden skirting moulded at one end with iron screws all complete as per the direction of Engineer-in-charge. | ||||||
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.46 MB
TD-NIT-NO-04-2026-27.pdf
Tender Documents • 3.09 MB
BOQ_24180.xls
BOQ • 0.31 MB
Instructions-to-bidders.pdf
Additional Documents • 0.33 MB
Download all tender documents and submit your bid