GE 861 EWS-34 (T)/2025-26

Amount

Excavation in trenches not exceeding 1.5 m wide and n.exc. 1.5 m deep for foundation of poles/stay/cable etc. including getting out in any type of soil complete all as specified and directed by Engineer-in-Charge.

Excavation in trenches not exceeding 1.5 m wide, beyond 1.5 m depth and n.exc. 3 m deep for foundation of poles/stay etc including getting out in any type of soil complete all as specified and directed by Engineer-in-Charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in soils complete all as specified and directed by Engineer-in-Charge.

Removing excavated materials n.exc. 50m and depositing where directed at a level n.exc. 1.5 m above the starting point complete all as specified and directed by Engineer-in-Charge.

M&L for Sand cushioning to cable with dry fine sand in trenches 8 cm below the cable and 15 cm above the cable after laying complete all as specified and directed by Engineer-in-Charge. Note: Punned thickness of 18 cms shall be measured and paid.

M&L for Bricks, laid in trenches flat with width equal to length of brick for cable protection well burnt sub class 'B' bricks, laid across the cable complete all as specified and directed by Engineer-in-Charge.

M&L for Plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete complete all as specified and directed by Engineer-in-Charge.

M&L Plain cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in, coping and the like complete including necessary form work complete all as specified and directed by Engineer-in-Charge.

S&F in replacement Pin type insulator porcelain, vitreous, white/ brown or green insulators including one galvanised MS spindle, two galvanized iron washer, GI nut, insulator of size 100 mm height and 65mm dia 1100 volts grade including dismantling of old unserviceable insulator complete all as specified and directed by Engineer-in-Charge.

S&F in replacement Shackle type insulators, porcelain, vitreous white/ brown or green including galvanised MS strips, bolt, nuts and washer, insulator of size 75mm height and 90mm dia, size of strap section 31x3mm and dia of 12 mm for working pressure 1100 volts grade including dismantling of old unserviceable insulators complete all as specified and directed by Engineer-in-Charge.

M&L for mild steel cross arms, bracings, supports, clamps and back plate fabricated from structural steel section including nuts, bolts, washers, welding bending cold or hot, drilling holes for bolts in any shapes size as indicated or directed and inclusive of one primer coat, and one under coat and one finished coat of aluminium paint including dismantling of old unserviceable cross arms complete all as specified and directed by Engineer-in-Charge.

M&L in replacement Aluminium conductors, reinforced (ACSR) conductor of any size for OH lines including stretching, binding wire, jumpers, line taps etc including dismantling of old unserviceable aluminium, conductors complete all as specified and directed by Engineer-in-Charge.

Restretching only the ACSR conductor fixed on over head line pole and tightening the ACSR, taking down the conductor from insulators complete with authorised sag and rewinding with insulators in proper position after tightening with new aluminium winding wire of dia 2mm complete all as specified and directed by Engineer-in-Charge.

S&F in replacement Stay assembly complete with accessories as shown in electric plate No. 1 and including loop type insulator white brown or green with over all dimensions 65x90mm, clearance of hole 16mm complete all as specified and directed by Engineer-in-Charge.

S&F in replacement MCCB 4 pole, 415 volts adjustable thermal setting 63 Amps with breaking capacity 16 KA complete all as specified and directed by Engineer-in-Charge.

S&F in replacement MCCB 4 pole, 415 volts adjustable thermal setting 100 Amps with breaking capacity 25 KA complete all as specified and directed by Engineer-in-Charge.

S&F in replacement MCCB 4 Pole, 415 V, Adjustable type, 160Amps with breaking capacity 36 KA complete all as specified and directed by Engineer-in-Charge.

S&F in replacement MCCB 4 Pole, 415 V, Adjustable type, 200Amps with breaking capacity 36 KA complete all as specified and directed by Engineer-in-Charge.

S&F in replacement MCCB 4 Pole, 415 V, Adjustable type, 250Amps with breaking capacity 36 KA complete all as specified and directed by Engineer-in-Charge.

S&F in replacement MCCB 4 Pole, 415 V, Adjustable type, 400Amps with breaking capacity 36 KA complete all as specified and directed by Engineer-in-Charge.

S&F in replacement Change over switch on load 415 volts TPN in sheet metal enclosure of capacity 63 Amps with side handle complete including taking down old one complete all as specified and directed by Engineer-in-Charge.

S&F in replacement Change over switch on load 415 volts TPN in sheet metal enclosure of capacity 100 Amps with side handle complete including taking down old one all complete all as specified and directed by Engineer-in-Charge.

S&F in replacement Change over switch on load 415 volts TPN in sheet metal enclosure of capacity 200 Amps with side handle complete including taking down old one complete all as specified and directed by Engineer-in-Charge.

S&F in replacement Change over switch on load 415 volts TPN in sheet metal enclosure of capacity 400 Amps with side handle complete including taking down old one complete all as specified and directed by Engineer-in-Charge.

S&F in replacement 1100 volt grade heavy duty XLPE cable with PVC insulated aluminium conductor served with inner sheathing of PVC tape armoured with galvanized steel strip or wire and overall PVC sheathed of size 16 Sqmm nominal cross section 4.0 core laid in trenches, fixed to pole or passing through pipes including all necessary clamps, nuts, bolts washers complete all as specified and directed. Note- Earth work and protection work shall be measured and paid separately .

Description all as per item No. 25 above but cross sectional area 25 Sqmm 4.0 core complete all as specified and directed by Engineer-in-Charge.

Description all as per item No. 25 above but cross sectional area 35 Sqmm 3.5 core complete all as specified and directed by Engineer-in-Charge.

Description all as per item No. 25 above but cross sectional area 50 Sqmm 3.5 core complete all as specified and directed by Engineer-in-Charge.

Description all as per item No. 25 above but cross sectional area 95 Sqmm 3.5 core complete all as specified and directed by Engineer-in-Charge.

Taking out from trenches/poles/wall etc LT UG Cable PVC insulated sheathed with multistranded aluminium conductor armoured and relaying after fault rectification duly tested in trenches/Poles/Wall of LT UG Cable of any sizes including Earth work complete all as specified and directed by Engineer-in-Charge. Note- Earth work and protection work shall be measured and paid separately.

M&L cable end termination heat shrink type jointing kit 1100 Volts for indoor/outdoor termination with jointing material and accessories suitable for 16 Sqmm to 70 Sqmm 3.5/4 core XLPE/PVC armoured aluminium conductor cable complete all as specified and directed by Engineer-in-Charge.

M&L cable end termination heat shrink type jointing kit 1100 Volts for indoor/outdoor termination with jointing material and accessories suitable for 95 Sqmm to 120 Sqmm 3.5 core XLPE/PVC armoured aluminium conductor cable complete all as specified and directed by Engineer-in-Charge.

M&L Painting of steel tubular electrical poles cross arms channels etc after scrapping the old patchy cracked painted surfaces and applying one coat of aluminium paint to complete pole, clamps, channel, cross arms and block strip of 30cm to 1.5 mtr height complete all as specified and directed by Engineer-in-Charge. Note: Contractor will take the power shut down on the feeder before commencement of painting work on electric poles.

M&L for painting of PCC poles with bracket/fitting etc complete by scrubbing old deteriorated paint preparing the surfaces, applying two coats of cement base paint including colour strip of two coats of synthetic enamel paint upto 1.5 mtr height, writing pole no. in black base complete all as specified and directed by Engineer-in-Charge.

Trimming of trees branches from electric over head lines and clearing of 2 meter distance horizontal and vertical from outer edge of conductor including removing cut branches 50 Mtr (minimum) away from the place complete all as specified and directed by Engineer-in-Charge. Note: Contractor will ensure shut down on the feeder in writing before commencement of work on electrical lines.

Supply and laying in replacement GI tubing light grade with all fitting laid in trenches or fixed on wall along pole complete for protection of electric cable/strip complete all as specified and directed by Engineer-in-Charge for:- (a) 80mm bore light grade GI tubing

(b) Description all as per item No. 36 above but for 50mm bore light grade GI tubing complete all as specified and directed by Engineer-in-Charge.

(c) Description all as per item No. 36 above but for 40mm dia light grade GI tubing complete all as specified and directed by Engineer-in-Charge.

M&L for road cutting including excavation in trenches for laying LT Cable of any size not exc 30 cm wide and n.exc 75 cm depth as per site requirement including making good the disturbed surfaces with cement concrete (1:3:6) type C-2 (using 40mm graded crushed stone aggregate) and top surface neatly finished to match with the existing surface of road complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement of voltmeter 0-500 volts digital type including taking down old existing unserviceable voltmeter complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement of Ammeter 0-400 Amps digital type including taking down old existing unserviceable Ammeter complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement CTs for amperemeter including taking down the existing old CTs complete all as specified and directed by Engineer-in-Charge.

Supply and fix in replacement Bus Bar Chamber of size 60 x 60 x45 cm suitable of 3 phase 433 Volts outdoor type made out of 3.15 mm thick M S Sheet with 200 Amps rated aluminium busbar (4 Nos ) PVC sleeves and coloured (Red, Yellow, Blue and Black) with locking arrangements and angle iron stand of size 40 x 40 x 6mm frame grouted in ground with PCC foundation 1:2:4 type C1 with 20mm graded crushed stone aggregate along with all necessary cable connections, lugs and cable gland including 2 coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-Charge.

Supply & fixing in replacement cable PVC insulated flexible copper conductor cable of size 1.5 Sqmm 3 core cut to pieces all as required, drawn into conduit/pipe fixed to wall or pole complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement 1100 volts grade heavy duty cable PVC insulated copper conductor (Solid ) of size 16 Sqmm single core served with inner sheathing of PVC tape and overall PVC sheathed in service connections complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement 1100 volts grade heavy duty cable PVC insulated copper conductor (Solid ) of size 25 Sqmm single core served with inner sheathing of PVC tape and overall PVC sheathed in service connections complete all as specified and directed by Engineer-in-Charge.

Removing the old unserviceable service cable taken as credit including Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed in service connections of nominal cross section 16 Sqmm 2 Core complete all as specified and directed by Engineer-in-Charge.

Removing the old unserviceable service cable taken as credit including Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed in service connections of nominal cross section 10 Sqmm 2 Core complete all as specified and directed by Engineer-in-Charge.

Supply only aluminium thimbles 1100 volts suitable for 70 Sqmm to 150 Sqmm cable complete all as specified and directed by Engineer-in-Charge.

Supply only aluminium thimbles 1100 volts suitable for 25 Sqmm to 50 Sqmm cable complete all as specified and directed by Engineer-in-Charge.

Supply only aluminium thimbles 1100 volts suitable for 6 Sqmm to 16 Sqmm cable complete all as specified and directed by Engineer-in-Charge.

Supply only smooth finish highly durable ruggedness copper Copper thimbles 1100 volts suitable for 70 Sqmm to 150 Sqmm cable complete all as specified and directed by Engineer-in-Charge.

Supply only smooth finish highly durable ruggedness copper thimbles 1100 volts suitable for 25 Sqmm to 50 Sqmm cable complete all as specified and directed by Engineer-in-Charge.

Supply only smooth finish highly durable ruggedness copper Copper thimbles 1100 volts suitable for 6 Sqmm to 16 Sqmm cable complete all as specified and directed by Engineer-in-Charge.

Material & labour for earthing complete with galvanised cast iron earth plate electrode of size 600x600x6.0mm thick busied directly in ground less than 3.0m deep below normal ground level as earth electrode with top edge of the earth plate not less than 2.25mtr below ground level using GI strip 32x6 mm dia as earth continuity conductor connected to earth plate by means of welding, GI thimbles, nuts, bolts & washers all as directed including providing earth wire protection pipe GI light grade15mm dia from earth plate to main switch board/panel, watering pipe 20mm dia with wire mesh and funnel at top, earth pit and RCC pit cover with handle of angle iron frame of size 40 x 40 x 6mm in PCC 1:3:6 adequate quantity of charcoal dust and salt and kalmi shora all around the earth plate, earth work in any type of soil remaining surplus excavated material all as required at site and specified in EP No 3 of SSR part I 2009 or directed by Engineer-in-charge and including testing on completion. (i) Cost main earthing lead from earth plate electrode to test point up to length of 7.5 metres length shall be deemed to be included in the unit rate quoted against this item . (ii) GI protection pipe & earthing lead beyond 7.5 meter shall be measured and paid for separately under appropriate item of Sch A. (iii) On testing, after completion, if the desired resistance is not obtained the contractor shall redo the earthing without any extra cost to the department .

ms new dar water star (BID ID -3373745)

M/S A.N CONSTRUCTIONs (BID ID -3368531)

M/S ASHRAF CONSTRUCTIONS (BID ID -3380720)