RFQ 11036 Renovation of Training Centre for First Aid Centre

P&F Precoated G.I profile /Trapezoidal profile sheets 0.50 mm (0.05%)TCT zinc coating 120 grams per sqm, in 240mpa steel grade, 5-7 microns epoxy primer & polyster top coating 15-18 micron, self drilling/ tapping screws (5.5-8x55mm)

P/F precoated galvanised steel sheets roofing accessories 0.50 mm(+0.50%) thickness. Zinc coating 120 grams per sqm, 240 mpa steel grade 5-7 microns epoxy primer and polyster top coat 15-18 microns .(A) Ridges plain(500-600 mm)

P/F precoated galvanised steel sheets roofing accessories 0.50 mm(+0.50%) thickness. Zinc coating 120 grams per sqm, 240 mpa steel grade 5-7 microns epoxy primer and polyster top coat 15-18 microns .(A) Flashings/Aprons (Upto 600 mm)

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption's less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid

Providing and fixing at all height false ceiling including providing and fixing of frame work made of special sections power pressed from M.S. sheet and galvanised in accordance with zinc coating of grade 350 as per IS : 277 and consist

Finishing walls with water proofing cement paint of required shade :Old work (one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 litrs/10 sqm complete including cost of Priming coat.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :Old work (one or more coats)

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work.

White washing with lime to give an even shade :Old work (two or more coats)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work

PROVIDING AND FIXING CIMMERCIAL PLY WOOD 6 MM THICK AS PER DIRECTIONS OF ENGINEER IN-CHARGE

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position : Sal wood

PROVIDING WOOD WORK IN FRAMES OF FALSE CEILING, PARTITIONS ETC. SAWN AND PUT UP IN POSITION : SAL WOOD

PROVIDING AND FIXING KAIL WOOD CHAMFERRED EDGE WOODEN BEADING 65X12 MM WITH M.S.SCREWS ETC.

DISMANTLING DOORS WINDOWS AND CLERSTORY WINDOWS (STEEL OR WOOD) SHRTTER INCLUDING CHOWKHATS, ARCHITRAVE, HOLDFASTS ETC. COMPLETE AND DEPOSITING THE SAME IN CENTRAL/SITE STORES. OF AREA 3 SQ.M AND BELOW

PROVIDING AND FIXING FLUSH DOOR SHUTTERS NON-DECORATIVE TYPE, CORE OF BLOCK BOARD CONSTRUCTION WITH FRAME OF 1ST CLASS HARD WOOD AND WELL MATCHED COMMERCIAL PLY VENEERING EITH VERTICAL GRAINS OR CROSS BANDS AND FACE VENEERS ON BOTH FACES OF

Half brick masonry with F.P.S. bricks of class designation 75 in superstructure above plinth level up to floor V level.Cement mortar 1:4 (1 cement :4 coarse sand)

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete.40mm thick with 20mm nomin

Renewing glass panes, with putty and nails wherever necessary:Float glass panes of thickness 5.5 mm

15 mm cement plaster on the rough side of single or half brick wall of mix :1:4 (1 cement: 4 fine sand)

Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. meters and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disp

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by EIC

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.1:3:6 or richer mix

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete:

PROVIDING AND FIXING BRIGHT FINISHING HYDRAULIC DOOR CLOSER ( BEST MAKE OF APPROVED QUALITY ) WITH NECESSARY ACCESSORIES AND SCREWS ETC. COMPLETE.

DISMANTLING WOODEN PARTITION WALL INCLUDING FRAME WORK, COMMERCIAL PLY, DOOR SHUTTER WITH BUTT HINGES, WOODEN BEADING ETC. COMPLETE, AS PER DIRECTION OF ENGINEER IN- CHARGE. LABOUR RATE ONLY

DISMANTLING ROOFING INCLUDING RIDGES, HIP VALLEYS AND GUTTERS ETC. AND DEPOSITING THE SERVICABLE MATERIALS IN CENTRAL/SITE STORES AND INCLUDING DISPOSAL OF UNSERVICABLE MATERIALS WITHIN 50 M LEAD AS PER DIRECTION OF ENGINEER IN CHARGE. ASB

Applying priming coat :With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)

Dismantling of steel structure such as platforms, support railing, hoppers, chutes, ducts, cells dismantling of mech. Equipments and elect. Equipments/ assemblies including rubber lined pipe line all heights

PROVIDING AND FIXING GLASS STRIPS IN JOINTS OF TERRAZO/ CEMENT CONCRETE FLOORS.40 MM WIDE AND 4 MM THICK

PROVIDING AND FIXING 500 LITRES CAPACITY SINTEX OR EQUIVALENT MAKE WATER TANK

Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles

Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, and as per direction of Engineer- in-Charge.

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. b

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern with manually controlled device,conforming to IS : 7231.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.Semi rigid pipe32 mm dia

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work15 mm dia. nominal bore

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :15 mm nominal bore

Providing and fixing PTMT bib cock of approved quality and colour.15mm nominal bore, 86 mm long, weighing not less than 88 gms

Providing and fixing brass stop cock of approved quality :15 mm nominal bore

Providing and fixing soil, waste and vent pipes : 100 mm dia.Sand cast iron S&S pipe as per IS: 1729.

PROVIDING AND FIXING 75 M.M. DIAMETER C.I. PIPE

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

CHHABRA ASSOCIATES

M/S VIJESH KUMAR MARWAL

M/S NASIRUDEEN CONTRACTOR

M/s Shri Krishan Construction Co.

RELAX MECHANICAL AND CONTRUCTION PVT LTD

CIS GLOBAL INFRATECH PRIVATE LIMITED