REPAIR TO FLOOR JOINERY/WALL PLASTER/WATER SUPPLY SANITARY FITTINGS OH TANKS PLUMBING WORKS ETC IN NOFRA AND OTM ACCN UNDER AGE BRI AT NAVAL STATION KARANJA

Amount

Demolition of brick work built in cement mortar in any position complete all as specified and directed.

M&L Brick work with subclass 'B' bricks with old size bricks, straight or curve on plan n'exc 6 mtr mean radius in CM (1:4) in half brick thick wall complete all as specified and directed.

M & L brick work with sub-class "B" bricks, straight or curved on plan exc 6 m mean radius built in CM (1:4) complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc. including raking out joints, hacking for key, scrubing down with water, etc. complete all as specified and directed.

M&L rendering 15mm thick cm 1:3 on top of the chaijah with water proofing compound including coping and proper slope and incl necessary cutting and making good and finished the surface even & smooth without using extra cement complete all as specified and directed.

M&L 5mm thick cm 1:3 plastering on ceiling concrete surfaces even and smooth with out using extra cement complete all as specified and directed.

M&L 15mm thick plastering on wall concrete surfaces in cm (1:6) even and smooth with out using extra cement complete all as specified and directed.

M&L 15mm thick in two layer rendering in CM 1:4 on external surface of wall, finished the surface even and fair with using wpc. ( wpc shall be measured & paid seperately) complete all as specified and directed.

M & L for preparation of newly plastered surfaces or previously untreated surfaces of ceiling and applying three coats of white wash on ceiling, complete all as specified and directed.

M & L for preparation of newly or untreated plastered surface applying two caots of oil bound distemper (OBD) over a coat primer complete all as specified and directed.

M & L preperation of newly plastered or previously untreated surfaces of wall and applying two coats of acrylic emulsion Exterior grade weather proof acrylic emulsion Antifungal and anti algea (Antifungal) paint over one coat of primer all as specified and directed

S&F in repair 15 mm pillar tap, cast copper alloy fency type chromium plated screwed down high, pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe and fixed to 15mm bore of pipe etc all as specified and directed by Engineer-in-Charge

Petty repairs to leakage of bib taps, pillar cock stopcock PVC connection waste pipes float valves, angle valve, concealed valve GI union joints of GI pipe Re-fixing of bottle trap etc by changing the PVC washers/Sheet washers or any other minor accessories etc complete all as specified and directed

Petty repair to high or low level flushing cistern by adjusting the float valve leaking of PVC connection, PVC bend including replacing of rubber washer check nuts plunger etc any type of flush all as directed

Renewing glazed or ceramic tiles in patches area not exceeding 5 Sqm including removing and cleaning old tiles preparing beds and laying or setting, jointing and pointing new or old tiles complete all as specified and directed

Dismantling floor hearth or wall tilling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off premises complete all as specified and directed.

M&L 15mm thick screed in CM 1:6 on brick or concrete surfaces for fixing of tiles as in floor complete all as specified and directed.

M&L 10mm thick rough plaster in CM 1:4 on brick or concrete surfaces for fixing of tiles as in dado/skirting complete all as specified and directed.

M&L Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M & L for coloured Glazed ceramic tiles (300x200mm)x7mm thick as in dado's set in neat cement slurry and pointing in white or coloured cement to match with tiles as in dado/skirting complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads etc complete all as specified and directed by Engineer-in-Charge.

S&F 4mm thick Figured glass, pinhead type in squares n exc 0.5 sq.m each pane etc complete all as specified and directed by Engineer-in-Charge.

S&F 4mm thick Sheet glass,ordinary quality and glazing with oil putty insquare n exc 0.5 sq. m in each pane etc complete all as specified and directed by Engineer-in-Charge.

S&F in Repair 32mm Waste pipe fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S&F in Repair 40mm Waste pipe fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S&F in Repair 32mm Waste coupling of cp (half or full threaded) complete all as specified and directed.

S&F in Repair 40mm Waste coupling of cp (half or full threaded) complete all as specified and directed.

S&F Grating of CP brass 100mm dia complete as specified & directed.

S&F in Reapir Bottle trap of PTMT having minimum water seal of 25mm .(Minimum weight 32mm-260gms/ 40mm-270 gms) complete all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed.

S & F in repairs Tublar towel rail 24" long , 20 mm dia, stainless steel complete all as specified

Taking up or down steel tubing and connections including for refixing or removal 15mm bore complete all as specified and directed.

Taking up or down steel tubing and connections including for refixing or removal 20mm bore complete all as specified and directed.

S&F tubes medium grade galvanished with all fittings fixed complete to walls and ceiling or laid in floors 15mm bore complete all as specified and directed.

S&F tubes medium grade galvanished with all fittings fixed complete to walls and ceiling or laid in floors 20mm bore complete all as specified and directed.

Refixing 15mm old steel tubing and connections in new or old position (Walls, ceiling, floors, etc. complete all as specified and directed.

Refixing 20mm old steel tubing and connections in new or old position (Walls, ceiling, floors, etc complete all as specified and directed.

S&F in repair15mm Bib taps, facny type & chromium plated complete all as specified and directed.

S&F in repair 15mm Pillar taps Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S&F in repair 15mm Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed but fancy type, chromium plated complete all as specified and directed.

S&F PVC (SWR) multi floor trap 100 mm size with grating including jointing with solvent cement complete all as specified and directed.

S&F in repair Spindle brass of 15mm dia for CP bib cock/pillar tap/wall mixer etc complete all as specified and directed.

S & F in repairs PVC Low level flushing cistren 10 Ltr capacety including all fitting such as flush pipe brackets etc all as directed.

S&F in repairs Plastic water closet seat cover, white, closed pattern with flat bottom, & cover & stainless steel hinging device complete all as specified and directed.

S & F in repairs vitreous China squatting pan, 'Orissa' pattern, size 580 x 440 mm white, with integral foot rests including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor and fixed complete all as specified.

Dismantling of Stone slabs & tiles of any description or thickness in floors, aprons etc. Laid, bedded & pointed in any mortar complete all as specified and directed.

M&L 18-20mm thick Granite (of any tpe) work (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platforms and like in CM(1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15 mm thick Screed in CM (1:6) complete all as specified and directed.

M&L machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over 15 mm thick screed bed in CM (1:6) complete all as specified and directed.

S&F in repair Kitchen Sink with draining board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers & waste; including bedding in CM to dwarf wall or including fixing cantilever brackets & connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

Demolition cement concrete n exc 15 cm thick (below or above ground level) complete all as specified and directed.

M & L PCC (1:3:6) type C-2 using 40mm graded agg as in 50mm thick as in plinth protection/footpath. finished even & smooth using extra cement complete all as specified and directed.

M & L PCC 1:2:4 type B-1 (20mm grded aggregate ) 40mm thick as in floor finished even & smooth using extra cement complete all as specified and directed.

Taking down Chowkats or frames not exc 1.5 sq m but with shutters (without taking off shutters from the frames) complete all as specified and directed.

S & F PVC door chowkhats frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supply & fixing in opening as per specification & drawing complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

Taking down Chowkats or frames exc 1.5 sq m but not exc 4 sq m each with shutters (without taking off shutters from the frames) complete all as specified and directed.

S&F 35mm Flush shutters, solid core construction, with block board core and plywood, commercial type on both sides complete all as specified and directed.

S&F 2nd class hardwood glazed and skelton shutters, 35mm thick, open rebated and prepared to receive glass, gauze etc with sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mtred beads for securing glass etc, sizes of members of shutters as specified in SSR Part-I, Section 8, Clause 8.24 (a)

Taking down shutter of any description exc 1 Sqm each complete all as specified and directed.

S & F 30 mm thick Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etc. for windows and ventilators etc complete all as specified and directed.

S&F IInd class HW plain, solid straight chowkhat and frames, wrought, framed re-bated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S&F Aluminium alloy wire cloth, 0.45mm nominal dia of wire & average width of aperture 1.40mm with aluminium wire staples complete all as specified and directed.

S&F in repair Aluminium alloy wire cloth, 0.45mm nominal dia of wire & average width of aperture 1.40mm with aluminium wire staples complete all as specified and directed.

S&F Stainlee steel medium weight butt hinges 100mm long complete all as specified and directed.

S&F Stainlee steel medium weight butt hinges 75 mm long complete all as specified and directed.

S & F Aluminium anodised barrel tower bolts of fabricated type and fixed, 200mm size complete all as specified and directed.

S & F Aluminium anodised barrel tower bolts of fabricated type and fixed, 150mm size complete all as specified and directed.

S & F Aluminium handle fabricated type anodised 150mm size complete all as specified and directed.

S & F Aluminium handle cast type anodised 125mm size complete all as specified and directed.

S & F 300mm Aluminium anodised sliding door bolt with hasp, staple(bott type ) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

S & F in repair Wash basins, vitreous China of size 550 x440mm(flat back or angle back type) any size, including cutting for and pinning in ends of brackets or crecting stand and pvc connection 450 mm and 32mm Waste fitings brass chromium plated for glazed ware sinks basins etc with long screwed shanks and fly -nuts flange and beded in redlead cement and other end fixed complete all as specified and directed.

S&F in repair 12mm thick Veneered decorateive plywood, grade 1 (with BWR resin) with decorate face veneers on one face; fixed with screws to timber frame work complete all as specified and directed.

S&F in repair PVC(SWR) pipes single socketed in any length with rubber ring joints fixed to walls 110mm dia etc all as direced.

S & F in repairs aluminium window/ventilators, made out of extruded powder coated aluminium sections, with sliding or openable shutters including frame and necessary jointing cleats, glazing clips, powder coated aluminium snap beading, screws etc complete and also including powder coated aluminium fittings such as cobra hinges, butt hinges, tower bolts, hooks & eyes peg stays and handles including connected items with and including, complete all as specified and directed. NOTE (i) Minimum thickness of powder coating shall be 15 micron for windows and 25 microns for doors. (ii) Rubber beading shall be measured and paid separately.

S&F star lock for window incl all necessary fittings complete all as specified and as directed.

S & F rubber beading suitable for fixing 4 mm/5mm thick glass in aluminium window/doors. etc complete all as specified and directed.

S & F in repairs aluminium powder coated grill of design DG 104 pattern, made out of 10mm dia rod fixed with and including standard aluminium frame of F section of size 23.40mm x15.30 mm and 1.4 mm thick all as per manufacturers instructions, as fixed in repair, complete all as specified and directed. Make: Deco grill or equivalent as approved.

S & F in repairs 15 mm dia bore cast copper alloy chromium plated fancy type angle cock with long shank & cup (concealed type), complete all as specified and directed.

S & F in repair drapery rod of aluminium alloy, powder coated 25mm dia with bracket incl approved decorative brass end knobs etc and fixed on wall. Complete all as specified and directed

S&F in repairs 40mm bore unplasticised PVC pipe of pressure rating 10 kg/Sqcm fixed complete to walls, ceiling or laid in floors complete all as specified and directed.

S&F in repairs Brass CP shower rose with swivel joint incl CP brass arm, size 100mm size complete all as specified and directed.

S&F in repair Cast iron floor trap 75mm dia, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed.

S&F in repair Cast iron Nahani trap 100mm dia, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed.

M&L in repair 18/19 mm thick Prelaminated particle board, interior grade, prelaminated both side with decorative choice laminations fixed with screws to timber frame work as in sliding and openable for wardrobe sutter with necessary fittings. Complete all as specified and directed.

M&L IInd class hardwood exc 6 and nexc 13 sqcm plain fillets square, rectangular in section, clean sawn, secured with nails or brads complete all as specified and directed.

S & F night latch 7 lever Godrej brass locking mechanism steel body with scratch resistant powder coated finish of size 98mm x 67mm x 28mm as in repairs all as specified and directed.

S&F in repar Brass CP wall mixer for mixing hot & cold water screwed down for iron pipe and fixed in repairs complete all as specified

S&F in repair sink mixer for mixing hot & cold water screwed down for iron pipe and fixed. Complete all as specified and as directed.

S & F in repairs Vitreous China wash down water closet pan (pedestal pattern), white including Plastic water closet seat, black, closed pattern with flat bottom, cover and mild steel chormium plated or aluminised hinging device and fixed complete all as specified.

S & F in repair Toilet paper holder of stainless steel , fixed to walls with chromium plated (CP) brass screws and complete all as specified.

S & F in repairs Stainless Steel Kitchen Plate Rack 24 gauge thick sheet of overall size 31" x 36" x 10 " fixed with steel screws to wooden plug & grouted in CM 1:3 and fixed all as specified.(Make 'Prayag 348' or Equivalent)

S & F in repairs Jet spray with 1.50 m tube Make 'Prayag' Cat No 522 or equivalent for wash down water closet (pedestal pattern) and fixed complete all as specified

S & F in repair 100 mm long Hasp and Staple, safety type, aluminium anodised including bolt to hinge plate and fixed with screws and fixed complete all as specified.

Taking down shutters of any description of size exc 1 sqm & nexc 2sqm and refixing in same opening after easing, adjusting and replacement of minor nails etc complete all as specified and directed.

S&F in repair 150mm dia Floor door stopper of aluminum alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified.

M & L for injection chemical GLYPHOSPHATE (4% Concentration) of 20 ml or till refusal by making cut / injection in the stem of plant of roots at 30 mm and sparaying with solution 25 ml GLYPHOSPHATE (4% concentration diluted with 1 ltr of water) and removing the plant / vegetation of following girth including penetrated roots complete including necessary scaffolding etc for plants / vegetation complete all as specified and directed for buildings upto and including 4 storeys .

Supply only Jumper brass with rubber or leather washer complete for 15 mm dia bib cock / stop cock brass all as specified.

Supply only Jumper brass with rubber or leather washer complete for 20 mm dia stop cock brass all as specified.

Supply and fixing in repairs 20 mm bore stop valves, caster copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iorn pipe or for unions and fixed completed all as specified.

S & F in repair MS Rat tail pattern/ helicle doors spring 150 to 200 mm, ordinary springs including roller and roller plate complete all as specified.

Supply and fixing in repairs Ply Wood 4 mm thickness, grade BWR, type BB fixed with screws/nails to timber framework of pasted with glue/ fevicol adhessive etc., complete all as specified.

Supply and fixing in repairs Ply Wood 6mm thickness, grade BWR, type BB fixed with screws/nails to timber framework of pasted with glue/ fevicol adhessive etc., complete all as specified.

Supply and fixing in repairs PTMT Ball valves 20 mm bore, high pressure with epoxy coated Aluminium rods & high density plastic ball screwed and fixed complete all as specified and directed.

BALAJI TRADERS