General maintenance Sanitary works

Amount

Providing and fixing G.I. pipes complete with G.I. fittings (Medium Grade) & clamps including cutting holes/chases in walls and making good the same/earth work in trenches (Make Parkash Surya/Jindal). 15 mm nominal bore

------------do------------- 20 mm nominal bore

------------do------------- 25 mm nominal bore

Making connection of G.I. distribution branch with G.I mains of 25mm to 40mm nom. bore by providing & fixing of Tee by cutting & threading the pipe complete.

Providing and fixing Ball Valve (Brass) of approved quality including handle (Make SHIP/DRP) 15 mm nominal size

------------do------------- 20 mm nominal size

------------do------------- 25 mm nominal size

Providing and fixing 15mm brass bib cock of approved quality weighing 400 gms.

Providing and fixing white vitreous china pedestal type (European type/wash down type) water closet pan (Parry ware /Hind ware /Cera)

Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete (Parry ware /Hind ware/ /Cera)White colour

Providing and fixing white vitreous china water closet squatting pan.( Indian type) Orissa Pattern W.C. pan of size 580 x 440 mm (Hindware/Parryware/Cera)

Providing and fixing low level PVC flushing cistern with manually controlled device (handle lever) conf. To IS: 7231 with fitting & fixtures complete (Parry ware / Hind ware /Cera) 10 Liter Capacity – White.

Providing and fixing white vitreous china wash basin including making all connection but excluding the cost of fitting Flat Back wash basin 550 mm x 400mm (Parry ware /Hind ware/ Cera)

Providing and fixing mirror of superior glass of approved quality and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular Shape 453 mm x 357 mm.

Providing and fixing of C. P. Pillar cock ‘Parko/Cera Make’ 15 mm nominal bore

Providing and fixing of PTMT Pillar cock ‘Prayag Make’ 15 mm (nominal size) 107 mm long weighing not less than 110 gms.

Providing and fixing CP brass bibcock of ‘Parko/Cera Make’ 15mm nominal bore

Providing and fixing PTMT bibcock of Prayag Make 15mm nominal bore, 86 mm long weighing not less than 88 gms.

Providing and fixing CP brass angle valve for basin mixture Geyser points/washbasins of ‘Parko/Cera Make’ 15mm nominal bore

Providing and fixing PTMT angle valve/stop cock for basin mixture Geyser points/washbasins of ‘Prayag Make’ 15mm nom. Bore, 86 mm long weighing not less than 88 gms.

Providing and fixing of C. P. Phase for Pillar cock/Bib Cock ‘ISI Make’ 15 mm nominal bore

Providing and fixing of PVC waste pipe for sink or wash basin including P.V.C. waste fitting complete Semi Rigid Pipe 32/40 mm

Providing and fixing PTMT Grating (Prayag Make) 100mm dia Circular Type

v CP Grating 100mm dia Circular Type

Providing and fixing phase/jumper washer

Providing and fixing C.P waste coupling of 32/40 mm nom size for steel sink/washbasin of approved quality (ISI).

Providing and fixing PTMT waste coupling of 32/40mm nom size for wash basins/sink coupling 38 mm of 83 mm length and 77 mm breadth.

Providing and fixing of unplasticised PVC connection pipe with bass union 45 cm length & 15 mm nom. bore.

Providing and fixing CP jet with PVC pipe to be fixed with WC of approved quality.

Providing and fixing of P.V.C. siphon set to be fixed in cistern of approved quality

Providing and fixing of PVC cistern bend pipe of standard size & approved quallity.

Providing and fixing PTMT shelf 440mm long, 124mm width and 36mm height of approved quality, colour and make, weighing not less than 300 gms (Prayag Make).

Providing and fixing of low level PVC cistern Handle of approved quality.

Providing and laying PVC pipe superior quality of following dias (Uniplas, Supreme, Finolex make) 4 kg/cm2 pressure in ground including earthwork/cutting chases on walls in case of Rain Water Pipe including jointing with adhesive of approved make ,making good the same etc. complete. Nothing extra shall be paid. 80 mm dia

--------------do--------------- 110 mm dia

--------------do--------------- 150 mm dia

Providing and fixing PVC bend of Supreme/Prince/Uniplas Make 80 mm dia

--------------do--------------- 110 mm dia

--------------do--------------- 150 mm dia

Providing and fixing of G.I Accessories ISI marked for repair work. Socket 15 mm nominal bore

-------------do---------- Socket 20 mm nominal bore

------do--------- Reducer Socket 32 mm nominal bore

-------------do---------- Elbow 15 mm nominal bore

-------------do---------- Elbow 20 mm nominal bore

-------------do------- Elbow 25 mm nominal bore

-------------do---------- Elbow 32 mm nominal bore

-------------do-------- Nipple 15 x 75 mm

-------------do--------- Nipple 15 x 100 mm

-------------do-------- Nipple 15 x 150 mm

-------------do-------- Nipple 15 x 230 mm

-------------do------------ Nipple 15 x 300 mm

-------------do----------- Nipple 20 x 75 mm

-------------do------- Nipple 20 x 150 mm

-------------do--------- Nipple 20 x 300 mm

-------------do---------- Nipple 25 x 75 mm

-------------do----------- Nipple 25 x 150 mm

-------------do--------- Nipple 25 x 230 mm

-------------do--------- Tee equal 15 mm nominal bore

-------------do--------Tee equal 20 mm nominal bore

-------------do----------- Union 15 mm nominal bore

-------------do------------ Union 20 mm nominal bore

-------------do------------ Union 25 mm nominal bore

Providing and fixing PTMT towel rail including end brackets cost of wooden/PVC plugs with screw complete of size 600 x 20 mm of approved make. (Prayag Make).

Providing and fixing PTMT soap dish of approved quality and make. (Prayag Make)

Providing and placing on terraces Polyethylene water storage tank ISI: 12701 marked with cover & suitable locking arrangement & making necessary holes for inlet outlet & overflow pipes but without fittings of Sintex/Star/ Lotus make.

Providing and fixing Salem Stainless Steel A ISI 304 kitchen sink as per IS 13983 with C.I brackets and stainless steel plug 40mm including painting of fitting & brackets & cutting & making good the walls wherever required 610x460mm & Bowl depth 200 mm.

Providing and fixing of C.P shower rose with 15/20 mm inlet including rod with necessary plugs and screws. 100 mm dia

Providing and fixing of PTMT shower rose with 15/20 mm inlet including rod with necessary plugs and screws. 100 mm dia (Prayag Make)

Dismantling old floor traps & refitting the same with C.Conc.1:2:4 including jointing the waste water line including labour & material complete.

Providing and fixing of P.V.C. water tank covers on existing water tanks of standard size (Make Star, Sintex Lotus).

Providing and fixing of C.P. cup

Providing and fixing of C.P. nipple 50mm long & 15mm nominal size.

Making platform with cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) for Indian W.C. seat complete including cost of material & labour.

Providing and fixing of C.P. long bend for Low Level cistern

Cleaning of Manholes including clearing of drain pipes from manhole to manhole for making the lines fully functional and disposal of mulba from the site as directed by the engineer Incharge.

Cleaning of terrace/loft water storage tank (inside surface area) at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning anyGI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account)

Cleaning of under ground sump, Over Head R.C.C. Tank (independent staging) including disposal of slit and rubbish, all as per direction of Engineer-in-Charge. The cleaning shall consist following operations:- (i)Tank shall be emptied of water by pumping & bottom shall be cleaned of silt and other deposits. (ii) Entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water. (iii) Chlorination of RCC internal surface by liquid chlorine. (iv) The treated surface shall be dried using air jetting and all loose particles shall be removal from the surface. (v) Finally the surface shall be treated with ultraviolet radiation etc. as per direction of Engineer-in-Charge.

Providing and fixing PTMT Ball cock of approved quality Epoxy coated aluminum rod plastic ball (Prayag make) 15 mm nominal bore, 105 mm long, weighing not less than 138 gms.

---do--- 20 mm nominal bore, 120mm long, weighing not less than 198 gms.

---do---- 25 mm nominal bore, 152mm long, weighing not less than 440 gms.

Providing and fixing Ball Cock for cistern. 15 mm nominal bore

Supply of Labour for different works 2nd Class Plumber

---------do----------- Mazdoor

Providing and fixing unplasticised PVC connection pipe with PTMT nuts of approved quality, colour, 15 mm nominal bore with 30/45cm length

Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg. (Parko/Cera Make).

M/S PARVEEN SINGH RAINA CONTRACTOR