REPAIR /MAINT OF CERTAIN DRAINS, BOUNDARY WALL, FENCING, JEFFERIES WALL, PATH HARD

Amount

Dismantling posts or struts(wood, steel or RCC) any section embedded in concrete including taking out embedded portion of concrete and making good distrubed ground all as directed.

Excavation in post holes(or similar holes) in any type of soil each n exc 0.5 cum each getting out, and removing surplus soil to a distance nexc 50m and making good surface complete all as specified and directed.

M&L Cement concrete (1:3:6) type C2 (using 40 mm graded aggregate as in foundation of post, filling and mass concrete complete all as specified and directed.

Dismantling existing broken /rusted Fencing wire mesh of any size and position and removing from site complete all as specified and directed.

S&F posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290-0 E-165 all as directed.

Supply only chain link MS galvanised fancing any size all as specified and directed.

Fixing only chain link fencing including line wires of size 4mm dia GI wire any type of standards, rails straining bolts, etc including provision of binding wire complete all as specified and directed.

Supply & fixing MS round bar 10mm dia and over for line wire to chain link fencing etc complete all as specified and directed.

S&F in repairs Galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed wire with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolt , including securing or lying at crossing with and provision of galvanised mild steel wire, staples or steel pins, etc as directed incl dismantling old broken/rusted barbed wire of any dia and remove from site complete all as specified and directed.

S&F MS screw bolt (machine made) with hexonal or screwed head at one end and screwed the other end, and fitted with washer and one hexagonal or square nut n. exc 5cm long and 5 mm to 10mm dia bolt complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrom primer complete all as specified and directed.

M&L for preparation of new steel surfaces of any description n.exc.10cm in width or girth and when unconnected with other painting or when painted in a different tint applying two coats of synthetic enamel paint over a coat of red oxide zinc chrom primer complete all as specified and directed.

M&L for preparation of old steel surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

Demolition of Brickwork or stone/boulder masonry and precast block masonary for ashlar facings,dressed stonework, precast concrete articles and precast concrete block walling built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, complete all as directed.

Taking down cement plaster on brick or stone or pcc block wall etc including raking out joints, hacking for key, scrubbing down with water etc and including removal for debris and rubbish from the site complete all as specified and directed.

M&L for Walling of random rubble,uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and directed.

M&L for precast cement concrete block masonry with solid blocks of PCC 1:3:6 type C1 using 20 mm graded stone aggregate, exc. 10 cm in width and setting in CM 1:6 complete.

M & L precast cement concrete block masonry type C1, 1:3:6 (using 20 mm graded stone aggregate) with solid block or slab 10 cm thick and setting in mortar 1:4 all as specified.

M&L rendering 15 mm thick, in CM (1:4) on stone masonry surfaces or surface other than fair face of brick-work or on one side of lathing finished even and smooth without using extra cement complete all as specified and directed.

M&L rendering 15 mm thick, in CM (1:4) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement

Dismantling structural steel work in cluding doors, gates but excluding framed truss etc complete all as specified and directed.

S&F framed work as in doors or gates of angle,mild steel plate or other section with gusset plates , rails , braces, etc complete of Gde Fe-410-W or Gde - E-250, drilling, welding etc for fixing of steel sheeting or other covering. Doors etc to be prepared for hanging or sliding complete all as specified and directed.

S&F mild steel work conforming to Fe 310-0 or Fe 410-0 in hold fasts of flat iron ,hooks,pintle hinges,cleats hand made sliding bolts and smilar items complete all as specified.

M&L for preparation of old decorated plastered surfaces of walls and applying one coats of cement base paint complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint complete all as specified and directed.

M&L for preparation of old painted steel surfaces of any description not otherwise described over 10 cm width & girth by applying one coat of synthetic enamel paint of approved tint complete all as specified and directed .

M&L Providing precast ce- ment concrete type B1 1:2:4 using 20mm agg as in copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone walling). corbels, brackets, etc. (of any sectionindicated), with plain fair faces, including chamfers,weatherings, throat- ing etc. and setting in mortar 1:6 complete with joints to match all as specified and directed.

M&L Providing precast cement concrete Type BO 1:2:4 (using 12.5mm agg) as in louvres and jallies,35mm thick (measured solid), including allmould- ings complete all as specified and directed.

Providing & Laying, cement concrete Type B0 1:2:4 type (12.5mm) graded graded graded aggregate) in benching, Coping all as directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specificaqlly provided for and removing debries outside of MOD land as directed.

Demoliton of unreinforced cement concrete of any description & in any position not otherwise specifically provided for and removing debries outside of MOD land as directed.

M&L for precast reinforced cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate in landings, cover slabs (for manholes/septic tank/soak well etc.) chullah hoods, chajjas, shelves and similar articles with plain faces, set in CM 1:4, including necessary form work moulds etc all as specified. (Reinforcement shall be measured and paid for separately).

M&L for mild steel TMT bars 6 mm to 8 mm dia, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

M&L for mild steel TMT bars 10 mm dia and above, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

Demolition and breaking up drain pipes, (Salt glazed stoneware, AC or reinforced concrete) 150mm (internal dia) set in cement mortar complete all as specified and directed.

M&L for cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate as in bed to drain pipes of size 150 mm bore,including packing under and completely surrounding pipes with concrete after they are laid and tested; specified and as directed.

M&L for 200 mm bore reinforced concrete pipes class NP2, laid and jointed complete with collars.

M&L 75 mm thick cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggt) as in plinth protection including forming groove 10 mm wide & 30 mm deep & filled with bitumenous filler complete all as specified.

M&L for 75mm thick cement concrete type D-2, 1:4:8 (using 40mm graded stone aggregate) as sub base of floor.

M&L for 100mm thick cement concrete type B-2, 1:2:4 (using 40mm graded stone aggregate) as in floor finishes and paving.

M&L for Sand filling under floors or in foundations including watering and consolidation

M&L for rubber moulded vibratory compacted coloured precast concrete interlocking paver block any shape and size confirming to IS-15658-2006 of 60mm thickness, M-35 Grade with grey cement and pigment incl dismantling of old unsericeable tiles and rubbish off the premises complete all as specified and directed.

M&L for rubber moulded vibratory compacted coloured precast concrete interlocking paver block any shape and size confirming to IS-15658-2006 of 80mm thickness, M-40 Grade with grey cement and pigment incl dismantling of old unsericeable tiles and rubbish off the premises complete all as specified and directed.

M&L for rubber moulded coloured Chequered cement concrete tiles with grey cement and pigment 20cm x20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors, laid over and including 15mm thick screed bed in CM 1:6 complete all asincl dismantling of old unsericeable tiles and rubbish off the premises complete all as specified and directed.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete incl demolition and rubbish off old unserviceable kerb stone set in cement mortar and cement lime mortar complete all as specified and directed.

M&L two coat of synthetic enamel paint over a coat of primer on new concrete surfsce of any desc over 10cm width or girth,not otherwise described incl prep of surfaces complete all as specified and directed.

M&L one coat of synthetic enamel paint on old concrete surfsce of any desc over 10cm width or girth,not otherwise described incl prep of surfaces complete all as specified and directed.

M&L for 40mm thick PCC 1:2:4 type B-1 ( using 20mm graded agg) as in flooring complete all as specified and directed.

Providing and laying Cement concrete 1:2:4 type B0(using 12.5mm graded aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed.

Lalit and Brothers

National Rewinding Works

AMBEY MAA CONSTRUCTION COMPANY

M/S Tanisha Traders

M/s godara infratech and power industries