Tender ID

Karnataka

Retender

Works

Buildings

Renovation, Water Supply, Sanitation, Supply of New Furniture, Painting of Compound Wall and other repair works to New and Old IB in Kittur town of Channammana Kittur taluk of Belagavi district for the year 2024-25.

Public Works Department

PWD Division Office Belagavi | Karnataka

Amount: ₹51.5 LCloses: 20 Jun 2025Closed

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.

Timeline

Published11 Jun 2025
Closed20 Jun 2025
Retendered11 Jun 2025

Cancellation Details

Retendered

RetenderedRetenderedReason: Retendered

Published 11 Jun 2025

Tender Value

₹51.5 L

EMD Value

₹1.0 L

Closing Date

20 Jun 2025, 10:00 pmClosed

Tender Inviting Authority

Office Inviting Bids

Public Works Department

Contact Person

S S SOBARAD

Office Number

Work Description

Renovation, Water Supply, Sanitation, Supply of New Furniture, Painting of Compound Wall and other repair works to New and Old IB in Kittur town of Channammana Kittur taluk of Belagavi district for the year 2024-25.

Tender Information

Tender ID

PWD/2024-25/BD/WORK_INDENT20588/CALL-3

Reference Number

PWD/2024-25/BD/WORK_INDENT20588/CALL-3

Tender Type

Open

Product Category

Buildings

Form of Contract

Two Tender Document System(Two Cover)

Location

PWD Division Office Belagavi

Source Website

Subscribe to view

Documents Required

12 documents required · 12 mandatory

Technical Bid

RequiredContractors KPWD Registration Certificate

RequiredAnnual Turnover Certificate from CA from 2020-21 to 2024-25

RequiredWork done certificate for similar nature of Work from Competant authority Rank of Executive Engineer & above

RequiredName and Address of Contractor for Communication

RequiredLiquid assets or availability of credit facilities Credit lines or letter of credit or certificates from the banks

RequiredUDIN is Preffered

RequiredList of ongoing works/ Works in Hand

RequiredFilled froms enclosed with NIT

RequiredBid capacity on Letter head

RequiredQty wise work done certificate from competent authourity Rank of Executive Engineer & above

RequiredProfit and Loss A/C Statement

RequiredBidders shall ensure upload of relevant document certifying his/her status as Category II A reserved category as prescribed in the tender document

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of e-Procurement KPPP portal due to internet connectivity issues and technical glitches at bidders end.

Tender invited only for eligible contractors registered under Karnataka Public Works Dept

Conditional tenders will not be accepted.

The Tenderer shall obtain the workdone certificate in the prescribed format from the Competent Authority not below the rank of Executive Engineer(District Level Officer)and scan the Original Certificate and attach the scanned file to the Bid.

Financial Year will be reckoned as the period between first day of April and Thirty first day of March of succeeding year(both days inclusive)

All the documents to be uploaded shall be neatly scanned and the documents scanned shall be in original.

The tenderer shall note that the scanned Documents can also be uploaded in the tasks created under Document/Evidence Required from the Bidder.

The Employer reserves the right to Reject any or all Tenders without assigning any reason

The Department is not responsible for any delay in accessing e-procurement portal

Tenderer shall note that the Tenders of those found Eligible as mentioned in Clause 3 - Qualification of the Tenderer in Section 2 : Instructions to Tenderers (ITT), will only be considered for evaluation.

All materials required for the work shall be procured by the tenderer himself and should be got tested by the quality control authorities at his own cost before use on work.

The items quoted shall include cost of Royalty charges on constructive materials and other taxes as per the rates prevailing Govt Orders at the time of execution and including all the cost and conveyance of all materials, curing, loading and unloading with all lead and lifts, labour, hire charges of machinary and equipments, etc., complete and all incidental charges. All the items shall be executed as directed by the Engineer in charge of the work.

Royalty on construction materials and other taxes will be deducted as per prevailing Govt orders

All the Formats prescribed in the bid documents shall be filled in complete manner. ( section 3 & 4 of the bid document ) and shall be uploaded properly, signed by Tenderer . Necessary Certificates shall be uploaded along with the formats wherever required. General documents Section can be used for this purpose.

Physical quantities requirement to qualify the Tenderer is 50% of the estimated quantity as per Govt Order No. .FD 600 EXP -12/2024 Bangalore Dated: 05-11-2024

Department will not supply any materials.

The cost of the Tender form shall not be refundable.

Further particulars, if any, required by the Contractor can be had from the office of the Executive Engineer, PW Dept Division Belagavi during office hours on all working days. It may be noted that if any of the dates mentioned above happened next working day will holds good in lieu of the dates mentioned.

The Tenderer must be present during opening of tender and submit uploaded documents duly attested by Gazzeted Officer not below the rank of Executive Engineer and also produce original documents for confirmation at the time of opening.

The contractor should employ only registered labours as per Govt. Circular No. PWD/198/BMS/2009/ Dated: 24-06-2009. As per EPF & MP act 1952 in respect of the employees engaged by or through contractors, agencies and contractors shall have provident fund code no. & all the contract employees deployed by them are enrolled as members of provident fund.

As per Karnataka State Govt Order No:LD/300/LET/2006/Bangalore Dt: 1-1-2007 and Govt Ltr No:PW/134/BMS/2007, Dt: 27-7-2007, a sum amounting to 1% of the bill amount will be deducted towards Construction Labour Welfare fund.

THE CONTRACTORS ARE INSTRUCTED TO SUBMIT ONLY RELEVENT INFORMATION WITH RECORDS AS REQUIRED AND SPECIFIED IN QUALIFICATION CRITERIA. ANY JUNK, SUPERFLUOS AND UNNECESARY DOCUMENTS IF UPLOADED WILL TREATED AS MISLEADING AND SUCH TENDERS ARE LIABLE TO BE REJECTED.

The Item Rate quoted shall include the Royalty Charges on construction materials and other taxes (excluding GST) as per prevailing Government Orders.

GST shall be paid to the tendered amount separately.

The Increase in GST shall not be paid in the extended period of contract for which the contractor alone is responsible for delays as determined by the authority while granting the extension of time.

Financial turover of previous years shall be given a weight of 10% per year to bring them to the price level of the 2024-25 in the Technical Qualification Criteria

The Project Completion period is 6(Six) months and the Tenderer should maintain work during the defect liability period, which is (1)One year after successful completion of the work. (including Monsoon).

Appeal - As per the Govt. ltr no 572/CRM/2020/PWD-COMM-1-PWD-SEC, dated 09.10.2020 the Appeals received in e-procurement as per KTPP Act / Rules within the stipulated time will only be considered. Any written Appeal Received shall not be considered.

The tenderer should be a KPWD registered Class-III and Above Contractor.

Unique Document Identification Number (UDIN) for Practicing Chartered Account is Preffered

Any deviation/error/mistake found in units of items, they should be read as in the unified SR 2023-24(Contd for 2024-25) and the rates shall be quoted accordingly.

The Bid Document clause no 34.4 to be implemented as per Delegation of Power vide GO NO.PWD 423 FC-1 2018 Bangalore, Dated:24/09/2018

Technical Criteria

Past Experience

To qualify for award of this contract, each Tenderer in his name should have in the last five years i.e., 2020-21, 2021-22, 2022-23, 2023-24 and 2024-25 Achieved in at least One financial years a minimum financial turnover (in all classes of civil engineering construction works only) of Rs. 51.50 Lakhs

Audited CA Certificate of Annual Turnover

To qualify for award of this contract, each Tenderer in his name should have in the last five years 2020-21, 2021-22, 2022-23, 2023-24 and 2024-25 Satisfactorily completed, as prime contractor, at least one similar work such as Improvements of Road Works of value not less than Rs.25.75 Lakhs

Work Done Certificate

To qualify for award of this contract, each Tenderer in his name should have in the last five years i.e., To qualify for award of this contract, each Tenderer in his name should have in the last five years i.e., 2020-21, 2021-22, 2022-23, 2023-24 and 2024-25 executed the following minimum quantities of work 1) Earth work/Filling 405 Cum, 2)Flooring 400Sqm

Work Done Certificate

Capabilities of Vendor

Qualification and experience of the key technical and Management personnel in permanent employment with the Tenderer and those that are proposed to be deployed on this work, if work is awarded

Others -- Others -- Biodata of the personnel

Assessed Tender Capacity shall be more than the Tendered Amount

Others -- Others -- Assessment on the Letter Head of the Tenderer

Financial Status

As per this note each tenderer should further demonstrate Availability of key equipment/ machinery for execution of the work. However as per Govt Circular no GOFDAE 263EXP122022 dt 11 052022 this clause for owning key equipment for works costing upto Rs 3.00 Crores is exempted. However it is obligatory for the contractor to use the fallowing machineries for various activities involved in construction as per MORTH specifications. 1.Vibrator pin/Plate 2. Concrete Mixer Transit Mixer/Ajax 3.Water Tanker 4. JCB-Hitachi

Others -- Should scan and attach the requisite ownership documents hirelease agreement with the Bid and products

Report on the financial standing of the Tenderer, such as profit and loss statements and auditors report for the last five years.

Others -- Others -- Auditors Report

Each Tenderer should further demonstrate- liquid assets and/or availability of credit facilities of not less than Rs.15.45 lakhs Credit lines/letter of credit/ certificates from the banks for meeting the fund requirement etc. (Enclosed with this NIT under Forms of Bid qualification information as per Govt. Circular No. FD-CAM/16/2022(P-2), dated. 22.08.2022) (estimated cash flow for 3 months of peak construction period)

Line of Credit

Others

Tenderers who meet the above specified minimum qualifying criteria will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under Assessed available tender capacity equal to (AxNx2.5 - B) A equal to Maximum value of civil engineering works executed in any one year during the last five years (updated to 2025-26 price level) taking into account the completed as well as works in progress. 0.50 Year where B equal to Value at 2025-26 price level, of existing commitments and on-going works to be completed during the next 0.50 Year form the probable date of Award of this contract.

Others -- Others -- Calculation Sheet on letter head

Name and Address Telephone Nos. Fax Nos. and email ID of the Tenderers Bankers

Others -- Others -- Information on the Letter Head of the tenderer

The proposed methodology and program of construction, backed with equipment planning and deployment duly supported with broad calculations and quality control procedures proposed to be adopted, justifying their capability of execution and completion of the work as per technical specifications within the stipulated period of completion

Others -- Others -- CPM/PERT chart

Unique Document Identification Number (UDIN) for Practicing Chartered Account is Preffered

Others -- Others -- UDIN

Information on works which are yet to be completed.

Others -- Others -- Information in Format 5 and cerificate in format-3

Principal Place of Business (Full address)

Others -- Others -- Address proof, with declaration on Bidders letter head

Constitutional and Legal Status of the Tenderer

PWD Registration Certificate (Class I/II/III/IV)

The EMD of Rs. 1,03,100.00 shall be paid in full through e payment or in two parts i.e. part (1) Rs, 50,000.00 by e -payment Part (2) Rs. 53,100.00 EMD shall be in the form of Bank Guarantee and shall be scanned and uploaded along with the technical Bid. The original Bank Guarantee should be handed over to the Executive Engineer before the prescribed date and time of opening of the Bids.

Others -- Others -- Bank Guarantee shall be scanned and uploaded along with the technical Bid

Information of the works for which Tender acceptance letters are received.

Others -- Others -- New works

Information of the works for which Tenderer has submitted Tender

Others -- Others -- Information in Format 7

Information on litigation in which the Tenderer is involved:

Others -- Others -- Information in Format 10

Fee & Financial Details

Tender Fee Amount

₹1,290

EMD Fee Amount

₹1.0 L

Important Dates

Last Activity

11 Jun 2025

Published

11 Jun 2025

Bid Opening

21 Jun 2025

Download Ends

19 Jun 2025

BOQ Preview

•

Maintainance works to IB

•

Dismantling tile work in floors and roofs laid in cement mortar includ- ing stacking material to the appropriate disposal area as per direction of Engineer-in-charge.For thickness of tiles 10 mm to ...

•

Dismantling doors, windows and clerestory windows (steel or wood) shut- ter including chowkhats, architrave, holdfasts etc. complete and stacking to the appropriate disposal area as per direction of E...

•

Providing and laying Polished Glazed Vitrified tiles with thickness 10 mm in floor with different sizes with water absorption less than 0.08% and conforming to IS:15622, of approved...

•

Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), includi...

•

Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic E...

•

Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 ...

•

Providing & fixing Glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick Glass panes including cost of materials, labour, usa...

•

Providing and supplying cupboard shutter with 18mm thick one side Architect recommended decorative laminate (1mm thick) and other side balancing lamination(preferably white) HDHMR boARD of app...

•

Labour & installation charges for BWP ply:BWR ply:HDHMR: MDF & Particle board work of any thickness applicable for all types of work

•

Providing and fixing stainless steel 304 grade fancy handle of approved make fixed with sS screws etc. complete as per direction of Engineer-in- charge. 150 mm length

•

Providing and fixing stainless steel 304 grade soft closing hinges with two hole fixing & 165 degrees turning option for Wardrobe, Doors, Kitchen & other utilities of reputed make with scre...

•

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...

•

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 g/L and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior pai...

•

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.80 L/10 m² of approved brand and manuf...

•

Providing Brick work with common burnt clay Non Modular bricks of clasS designation 3.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all m...

•

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and r...

•

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle gre...

•

Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking to the appropriate disposal area as per direction of Engineer-in-charge. Up to 10 m...

•

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material to the appropriate disposal ...

•

Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on ...

•

Providing and fixing plywood 4 mm thick, one side decorative veneer conforming to IS: 1328 (type-1), for plain lining / cladding with necessary screws, including priming coat on unexpos...

•

Providing and fixing 4mm thick coir veneer board, ISI marked IS : 14842, plain lining with necessary screws, priming coat on unexposed surface etc., complete.

•

French spirit polishing :Two coats on new works including a coat of wood filler to give an even surface including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, s...

•

Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, w...

•

Repairs to plaster in patches of 2.5 m2 and less in walls, ceilings 10 to 20mm thick in cement mortar 1:3 including cutting the patches in proper shape and replastering the surface of the wall inclu...

•

Repairs to existing aluminium partition including Glass,board, lock, handle, beading etc cost of all material,labour, complete as per specifications.

•

Providing & fixing 100% Polyester Curtains with specification of

•

regular wash as per direction of Engineer in charge

•

Providing and fixing brass curtain rods of wall thickness 1.25 mm with two brass brackets fixed with brass screws and wooden plugs etc. wherever necessary complete.20 mm diameter.

•

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Su...

•

Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprisi...

•

Precast Cement Concrete Interlocking Blocks - Providing and laying 60mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Cy...

•

Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat...

•

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 g...

•

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as...

•

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over and including one coat of...

•

Pumping Machinery

•

Providing, Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well confirming to IS 8034-2000 specifications, to work site with testing of as per instructions of engineer incha...

•

Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments. 1x3x6 S...

•

Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments - Size 50 mm

•

Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments - Size 50 mm

•

Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog ...

•

Supply and delivery at site best indigenous brand new power capacitor as per IS 2834/1986 with latest amendments with KPTCL authorities and erection, electrification and commissioning of the same at t...

•

Providing and fixing normal gauge polythene pipes of approved quality with special flange compression type fittings of approved make including trench excavation and refilling etc. for EXTERNAL WORKS w...

•

Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well cap...

•

Labour charges for erection of indoor type panel board and meter board units with all necessary materials and labour tools and equipments including cement concrete for foundation/bed etc,complete as p...

•

Labour charges for providing connection using insulated sheathed steel wire cable as per IS 1554/ 1988 with latest amendments from KPTCL pole to meter board unit, with all necessary materials ,tool...

•

Providing main connection from pole PVC insulated sheathed steel wire cable in new trench as per IS 1554/ 1988 with latest amendments with ISI mark from KPTCL pole to meter board unit.

•

Providing main connection from pole PVC insulated sheathed steel wire cable in GI pipe as per IS 1554/ 1988 with latest amendments with ISI mark from KPTCL pole to meter board unit.

•

Providing and fixing suitable for 1.1 KV class UG cable filled with necessary bitumen/insulating compound complete with terminals, clamps,bolts,nuts and washers etc. with necessary materials and labou...

•

Earthing: Providing and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion of sa...

•

Supply and delivery at site delivery of best indigenous brand new MCB (Miniature Circuit Breakers) of required capacity as per IS 88228/1978 and its latest amendments and with ISI Mark of 6/10/16/20/2...

•

Pipeline work for Pumping Machinery

•

Mechanical Means -

•

Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of ...

•

Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...

•

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating Each depos...

•

Providing and fixing Three seater Sofa with cushion of size 7(L)x2.5(W) X2.75(H) ft made of upholstery fabric with seats fitted with padding, springs, webbing and as per direction of engine...

•

Providing and fixing Two seater Sofa with cushion of size 5(L)x2.5(W) X2.75(H) ft made of upholstery fabric with seats fitted with padding, springs, webbing and as per direction of engineer...

•

Providing and fixing Single seater Sofa with cushion of size 3(L)x2.5(W) X2.75(H) ft made of upholstery fabric with seats fitted with padding, springs, webbing and as per direction of engin...

•

Providing and fixing Single seater Recliner with cushion of size 3(L)x2.5(W)X2.75(H) ft made of Polyurethane or High performance upholstery fabric with seats fitted ...

•

Providing and supplying king size 6ft x 6ft soft pU foam 5 inch thick mattress with better enhanced air circulation & breathability & sleeping comfort of size as per direction of engineer in charge

•

Providing and supplying single size 6ft x 2.5ft soft pU foam 5 inch thick mattress of reputed make with better enhanced air circulation & breathability & sleeping comfort of size as per di...

•

Providing and supplying pillow Microfibre with deep sleeping comfort

•

of size upto 70cm x 40cm as per direction of engineer in charge

•

Providing & supplying Carpet/Mat of 800+ gsm with stain proof, flexible and super absorbent fibre of good quality as per direction of Engineer in charge.

•

Teak Wood Nagin Teapoy : Of size 3'x2'. Made out of Teak Wood leg size 3"x3" with carving. Top glass frame of size 3"x1.1/4" & 2"x 1.5" with 8mm tinted glass. Bottom magzine shelf required with 1.5'x3...

•

Teak Wood Sunrise Cot Double : Of size 6.5'x5' (without side box) Head side -5'x3"x2"-02 Nos. Panels -5'x32"x1.5"-01 No. Average. Leg side-1.5'x3"x2"-02 Nos. Panels - 5'x18"x1.5"-01 No.- Average. Base...

•

Teak Wood Sunrise Cot Single : Of size 6.5'x3'. Made out of Teak wood leg size 2"x3" . Side bars 4"x1.5". Leg side height 18". Head side 33". Head and leg side Teak wood patti. Cot shall be neatly fin...

•

eakWood Square Leg Dinning Table : Of size 6'x3.5'. Made out of Teak wood leg size 4"x4". Table upper patti 4"x1.25". Top 18mm ply with sunmica or 12mm glass. polished. [I.No.- KSFIC.DWD -017 / Page- ...

•

Teak Wood Dinning Chair Seat & Back Cushion : with curved legs - Front legs of size 3"x3" with curve. Rear legs of size 2.5"x1.5" with shape. Seat pattis of size 3"x1.25" with cushion. Back top pattis...

•

Teak Wood Chair Seat & Back with Cushion / Rexin : Leg size 2"x1.5" with front and back legs of size 38"x2"x1.5".Handle of size 2"x1.5". Chair side bars 3"x1.1/4" pattis. Chair shall be neatly finishe...

•

ELECTRICAL WORKS

•

Supplying heavy gauge PVC conduit pipe . mm dia.mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The cond...

•

Point wiring using Copper wire without switch Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wir...

•

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

•

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. [I.No.-3.5.6 / Page-8 of PWD Electrical SR (Vol. 6) 2023-24]

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. [I.No.-3.6.1 / Page-9 of PWD Electrical SR (Vol. 6) 2023-24]

•

-6A One Way Swi...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. [I.No.-3.6.2 / Page-9 of PWD Electrical SR (Vol. 6) 2023-24]

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. [I.No.-3.6.3 / Page-9 of PWD Electrical SR (Vol. 6) 2023-24]

•

-6A Three Way ...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. [I.No.-3.6.4 / Page-9 of PWD Electrical SR (Vol. 6) 2023-24]

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. [I.No.-3.6.7 / Page-9 of PWD Electrical SR (Vol. 6) 2023-24]

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. [I.No.-3.6.10 / Page-9 of PWD Electrical SR (Vol. 6) 2023-24]

•

Supplying exhaust fan of 1440 RPM of 300 mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply. [I.No.-6.1 / Page-30 of PWD Electrical SR (Vol. 6) 2023-...

•

Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball be...

•

Supplying and drawing PVC insulated gas injected physical foam jelly flooded co-axial TV cable.RG-6. [I.No.-8.3 / Page-36 of PWD Electrical SR (Vol. 6) 2023-24]

•

Supplying of feet-PVC Batten with integrated LED tube W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greaterthan 80. Power Input: 220-240V at 50/60Hz & ...

•

Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, r...

•

Supplying & fixing - flexible LED Strip Light . W Power consumption in 5 ms length CCT6500 degree K, CRI greaterthan 70%. efficacy greaterthan 80 lumen per W, life greaterthan 25000 burning hours and ...

•

Supply of round/square recess/surface mounted rolling type LED Down light with . W GU 10 LED Lamp Rib Fabricated from diecast aluminium with white powder coated prewired to mains connector & has swive...

•

Water Supply & Sanitary works

•

Removing of existing old or broken wash basin / urinals/ Indian Water closet/ European Water closet and disposing it with all cost and conveyance labour for all items of work, HOM with all l...

•

Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting...

•

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good...

•

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

•

Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 g.

•

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixi...

•

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixi...

•

Providing and fixing mirror of superior Glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangula...

•

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel ...

•

Providing and fixing Single Lever Basin Mixer with 450mm long flexible connectors made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - class - Premium

•

Providing and fixing Single lever wall mixer made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - class - Premium

•

Providing and fixing Overhead rain showers of minimum dimension 225x225mm & wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - cl...

•

Providing and fixing Bidet spray made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - class - Premium

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

kmmcr.zip

Others - KMMCR • 0.33 MB

technical specifications.zip

Others - Technical Specifications • 0.30 MB

bg_emd.jpg

Others - BG EMD • 0.24 MB

roads & bridges specifications.zip

Others - Roads & specifications • 0.37 MB

NIT kppp_formats.xls

Others - NIT formats • 0.11 MB

government notification bc loc letter to be issued by the bank.pdf

Others - BC LOC • 1.73 MB

20588 CALL-3 bid doc kw3..doc

Tender Document • 1.80 MB

royalty go.zip

Others - Royalty GO • 0.07 MB

Agreement Format Govt Circular.pdf

Others - Agreement format • 2.38 MB

appeal go.pdf

Others - appeal GO • 0.93 MB

Govt Circular Regarding debarring of contractors under KTPP Act and Rules.pdf

Others - KTPP rules & Acts • 0.10 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Tender ID

Karnataka

Retender

Works

Buildings

Renovation, Water Supply, Sanitation, Supply of New Furniture, Painting of Compound Wall and other repair works to New and Old IB in Kittur town of Channammana Kittur taluk of Belagavi district for the year 2024-25.

Public Works Department

PWD Division Office Belagavi | Karnataka

Amount: ₹51.5 LCloses: 20 Jun 2025Closed

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.

Timeline

Published11 Jun 2025
Closed20 Jun 2025
Retendered11 Jun 2025