REPAIR MAINT OF SANITARY FITTINGS SUNKEN PORTION, CHAJJAS, FLOOR SET, WALL PANLING, GLASS DOOR FOR OTM ACCN AND MD ACCN AT AF STATION DEOLALI

Amount

M & L for prepring old plaster surface and applying one coat of cement base paint on wall surface having no sign of brush marks complete all as specified and directed.

M&L preparing old plastered surfaces of wall and applying one coat of white wash complete all as specified and directed.

M&L Preparing old plastered surfaces of ceiling and applying two coats of white wash complete all as specified and directed.

M&L Preparing old plastered surfaces of walls and applying one coats of oil bound emulsion complete all as specified and directed.

Taking down chowkats with shutter (without taking off shutter from the frame) not exc 1.5 Sqm each.

All as item above herein before but exc 1.5 sqm but not 4 Sqm each

Taking down shutter of any description n.exc 1 sqm each.

All as per item above here in before but exc 1 sqm and n.exc 2 sqm each.

Refixing shutters of any description in the same opening incl taking down and resecuring or easing and adjusting all as specififed not exc 1 sqm each

all as item above herein before but exc 1 sqm but not exc 2 sqm each

S & F 30 mm thick factory made second class hard wood glazed and skeleton shutters in windows, ventilators etc, open rebated and prepared to receive glass, gauze, etc., divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc; sizes of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (b):

M & L 35 mm thick factory made second class hard wood plain framed factory made panalled shutters( two panels) with 12 mm thick veneered particle board with commercial face veneers on both side as panel inserts, styles & rails shall be of second class hard wood timber generally conforming to IS-1003(Part-I) (Door shutters) Kiln seasoned and chemically pressure treated.

S & F 35 mm thick second class hard wood factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc; sizes of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (a).

S & F 40 mm thick Flush shutters, solid core construction, with particle board core and if both faces are covered with decorative face veneer with lipping/frame to match

S & F factory made solid panel PVC door frame of size 50mmx47mm out of 5mm wood grain printed PVC sheet & edges will be printed to match with printed sheet reinforced with M.S. square tube, all as per specification and drawing.

S & F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strips of 20 mm width stuck inside with solvent cement for stiles and single sides prelam PVC sheet and stile & rails having one side feathered edge and on other side 10mm (90°) bent edges & as gap insert for top rail & bottom rail; Panelling to be fitted in the M.S. frame welded/ sealed to the styles & rail with suitable PVC sheet beading, and joint together with solvent cement, all as specification and drawing.

S&F steel windows with side hung shutters including box type hinge of size 50 mm with 'z' type steel handle and steel peg stay and 02 No.100 mm size MS tower bolts welded on each shutter complete with glazing bars, dovetailed or welded all as specified.

S&F steel windows with side hung shutter including box type hinges of size 50 mm with 'z' type steel handle and steel peg stay and 02 No.100 mm size MS tower bolts welded on each shutter complete without glazing bars, dovetailed or welded

S&F steel ventilators with top hung shutter including hinges, steel pegstay, tower bolt etc completed as specified

S & F steel windows or ventilators fixed type, with glazing bars.

S&F window guard bars welded in window/fixed independently in wooden frame conforming toFe-290 Gde E-165

Hacking out old broken glass panes (any thickness size quality or description ) from wooden frame fixed with oil putty or beads area not exc 0.5 Sqm each all as directed

S & F 3mm thick sheet glass ordinary quality and glazing with oil putty not exe 0.5 sqm in each pane.

S&F Pressed steel frames for doors(125x60) mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified, supplied and fixed etc complete.

S&F 100 mm long Butt hinges, extruded aluminium ally with galvanished mild steel hinge pin anodised and fixed type B-21

S&F mild steel butt hinges medium weight cold rolled 100 mm size

- ditto - all as item 27 herein before but 75 mm size

S & F 100 mm size aluminium anodised barrel tower bolt of extruded section .

S&F 300 mm Aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) & fixing clip of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed.

S & F 100 mmm long extruded aluminium ally handles, fabricated type., anodised

S & F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised.

S & F in repair ordinary rat tails150 mm size pattern door springs including roller and roller plate complete.

S&F in repair 75 mm length floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring Fixed in floor

S & F stainless steel wire cloth, 0.36 mm dia of wire and average width of aperture 1.4 mm and fixed with stainless steel wire staples including necessary wooden bedding.

M&L 2 coat of synthetic enamel painting to new surfaces of wood and wood based material surfaces exc 10cm width or girth over a one coat of pink primer incl preparation.

Taking down cement plaster of any description, on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc complete.

M & L rendering 15 mm thick plaster in cement mortar 1:6 on stone masonry surfaces or other than of fair faces of brick or concrete surfaces, finished even and smooth with 1 mm thick layer of sagol finish complete.

M & L for prepariation of New plastered surfaces and applying two coats of distemper oil emulsion over a coat of chalk whiting for preparatory to distempering on surfaces of walls.

M&L in repair for 18/19 mm thick prelaminated particle board, interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work in cup board shutters, partitions, shelves, cupboard drawers, pelmet boxes and similar work including taking down olds shutters/shelves.

M&L for external teak wood lipping, 6mm thick fixed with nails for particle board of 18/19 mm thick

S & F in hasp and staple of size 125 mm, safety type, aluminium anodised with mild steel hinge pin including bolt to hing plate and fixed with screws.

Demolition of cement concrete (unreinforced) in ground floors (below or above ground level) not exceeding 15cm thickness all as directed by Engr-in-Charge.

M & L 75mm thick PCC 1:3:6 mix type C2 as in plinth protection and surface to be finished fair without using extra cement .

M&L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in near cement slurry in floors with grey cement and pigment over 15 mm thick screed bed in CM 1:6

M & L for Cement concrete 1: 2:4 type B-1 (20 mm graded stone aggregate) as in edges for Coping.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed.

M&L mat finish ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm,(400x400) in floors etc over and including 15 mm thick screed bedding in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface complete all as specified and directed.

M&L mat finish ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm,(400x150) in skirting etc over and including 10 mm thick bedding layer in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface complete all as specified and directed.

M&L for Glazed ceramic tiles in vertical surface 450x 300x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match and including 15mm thick bedding layer/ backing coat in CM 1:4 complete all as specified and directed.

M&L granite (of any type) work ( table rubbed & polished), 18 to 20mm thick, in steps, jambs, pillars, window-cill, cooking platforms & like in cement mortar (1:4) including polishing of chamfered edges and pointing in white cement using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick screed bed in CM (1:6).

Dismantling Structural steel work including doors, gates but excluding framed truss etc.

S & F rolled mild steel framed work as in doors or gates of angle or other section confirming to Fe 410 - W, with gusset plates, rails braces, etc., complete, drilled for fixing of steel sheeting or other covering and hanging and fixing complete.

M & L for prepariation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer.

S&F mild steel butt hinges heavy weight cold rolled 125mm size

S&F mild steel sliding door bolt plate type black jappaned with bright bolt not less than 12 mm dia with and including 6 bolts and nuts four o bolt plate and two on staple 250 mm long

S & F 200 mm long mild steel barrel tower bolts, stove enamelled black, with bright bolt.

Dismantling ceiling boarding of any description fixed in any position with nails incl cover fillets/aluminium snap grid.

S&F Anodised aluminium snap grid frame work size 605x605 mm for false ceiling incl Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long all as specified & directed by Engr -in-charge

M & L Non asbestos fibre cement building boards 4 mm thick (one side embosed design), fixed or laid/ inserted to Aluminium grid frame work in ceiling with clips all as specified and directed.

Fixing only in repairs Asbestos Cement Plain building boards/Non asbestos fibre cement building boards any thickness, fixed to timber/ Aluminium frame work with screws in ceilings.

M & L for prepariation of newly cement building boards surfaces of ceilings and applying two coats of white wash.

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars, walls etc.

M & L for brick work with sub-class `B' bricks old size, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6.

M& L Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in Cement mortar 1:6

M & L for rendering 15 mm thick on fair faces of brick work or concrete surfaces of walls in cement mortar 1:4 finished even and fair.

M & L for rendering 15 mm thick on stone masonry surfaces or surface other than fair face of brick-work or on one side of lathing surfaces of walls in cement mortar 1:4 finished even and fair.

M & L for prepariation of new plastered surfaces and applying two coats of cement base paint over a coat of alkali resitant primer on surfaces of walls.

Taking up or down steel water tubing and connecting incl cleaning for refixing or removal to stores for 20mm bore. complete all as specified and as directed

M&L GI tubes medium grade 20mm bore fixed complete to wall or laid in floor. complete all as specified and as directed.

Taking up or down steel water tubing and connecting incl cleaning for refixing or removal to stores for 15mm bore.

S & F GI tubing 15 mm bore medium grade with all fittings & fixed complete to walls or laid in floors.

Dismantling water storage tank 500 ltrs & n.exc. 1000 ltrs all as specified

M&L Rotational moulded polyethylene water storage tanks of 1000 ltr capacity (cylinderical verticla with closed top ) hoised and fixed in position all as specified in SSR part I

S&F 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed

S&F in repairs 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed

S & F in repairs 20 mm dia Gun Metal, globe or Gate Valve with Iron wheel head Screwed both ends for Iron Pipe and fixed.

S&F in repair Bib taps for 15 mm bore pipe, cast copper alloy fancy type chromium plated fixed in repairs of complete all as spd and directed.

S & F in repairs 15 mm bore fancy type chromium plated pillar taps cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule.

S & F in repairs stop cocks 15 mm bore, chromium plated , fancy type screwed down , high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions .

S & F in repairs wash hand basins, vitreous china( flat back) white of size 550mm X 400mm including cutting for and pinning in ends of brackets or erecting stand including waste coupling fitting, brass chromium plated 32 mm size with long screwed shucks and fly nuts and including PVC discharge pipe as specified.

S & F in repair Vitreous China Squatting pan, Orissa pattern, size 580 x 440 mm white with `P' or `S' trap, front or back inlet and integral foot rests including connection to trap, to flushing pipe etc. complete including PCC for making good to floor etc.

S & F in repairs 10 liters PVC valveless symphonic action type flushing cistern high/low level, white complete with inlet, ball valve, float and handle including brackets and telescopic down pipes and joint with WC complete.

S & F PVC connection 15 mm bore size with PTMT nuts and PVC washers of length 450 mm.

S & F in repair vitreous china wash down water closet (Pedestal) including white PVC seat cover closed pattern with flat bottem and cover and mild steel chromium plated hinge device,connection to drain or outgoing pipe and to flushing pipe, antisyphonage pipe joint to socket or stoper etc, white (EWC).

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complet all as directed.

S & F Solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet used instead of plaincolour sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications.

5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification.

Demolition of cement concrete (reinforced) in any description and in any position not other wise specifically provided for complete all as specified at site.

M&L re-inforced Cement Concrete, type M-25, (using 20mm graded granite stone aggregate) as in chajjas.

Use & waste of form work to chullah hoods, chajjas, through nd similer items including edges.

M&L for TMT bars 6 mm to 8 mm dia, cut to length, bent to shape reqd, including cranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel (annealed) not less than 0.90 mm dia or securing with clips complete all as specified and directed

Demolition of cement concrete (unreinforced) in any description and in any position not other wise specifically provided for complete all as specified at site.

M& L 10mm thick cement plaster in cement mortar 1:3 on concrete surface finished even and smooth using WPC liquid of make Dr. Fixit or STP as per manufacturer instruction @ 0.200 ltr in 50 Kg of cement (In sunken floor)

Supply only liquid water proofing compound

M&L for cleaning the newly plastered surfaces thoroughly with wire brushes and providing water proofing treatment all as specified here in after :- (a) Bituminous primer @ 0.30liter per sqm conforming to IS 3384-1986 (b) Painting with one coat of bitumin grade 85/25 @ 1.2 Kg/Sqm as in sunken floor all as specified and directed by Engr-In-Charge.

M&L plain cement concrete type B-0, 1:2:4 (12.5mm graded) as in, sunken floor etc

M&L plain cement concrete type E-2, 1:5:10 (12.5mm graded) as in, sunken floor etc

M&L plain cement concrete type D-2, 1:2:4 (40mm graded) as in sub base, sunken floor etc

S & F powder coated sections for doors and windows including frames of size as approved and fixed all as specified and directed (Note : (i) Paneling such as glass , Gauge etc will be measured and paid saperately.(ii) The rate quoted under this item deemed included for necessary jointing cleates, glazing clips, alluminium beading, screws, rubber packing and locking devices & in built handles for sliding windows. However, no element on account of weight will be taken into consideration for these item.(iii) Floor door spring/locks/tower bolts/ handles/ door closure/hinges for doors measured saparately.(iv) Size of door / windows shall be all as directed at site.(v) Grills will be measured saparately.(vi) Second class hard wood batten of appropriate size to be inserted inside the frame for fixing hinges and the same is included in the rate quoted.)

S & F plain sheet glass 5 mm thick tinted, fixed to aluminium doors/ windows / ventilators complete all as directed by Engr-in-Charge (Note:- Beading/rubber packing is included in the rates for aluminium sections above.)

S&F in repair double action floor door stoper/spring hydroulically regulated made up of minium 1.25 mm thick aluminium alloy sheet foundation bore, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty as in fixed including taking down and refixing aluminium shutter in the same opening.

S & F in repairs aluminium (diecast) body door closer hydraulically regulated, designation No. 1 universal type, suitable for door shutters of 700 mm in width & weight not more than 35 Kg.

S&F in repair Mortice lock brass 100 mm 4 lever vertical type fixed.

M&L re-inforced Cement Concrete, type M-25, (using 20mm graded granite stone aggregate) as in chajjas.

Use & waste of form work to chullah hoods, chajjas, through nd similer items including edges.

S & F in repair stainless steel wire cloth, 0.36 mm dia of wire and average width of aperture 1.4 mm and fixed with stainless steel wire staples including necessary wooden bedding.

Vinod Enterprises

MAHIMA CONSTRUCTION

M/S Nilesh Enterprises

SIDDHIVINAYAK ENTERPRISES