Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.6 LAccepted-AOC | ₹9.6 L | L1 | Accepted-AOC Accept |
| 2 | L2₹9.7 L+₹8,345 (0.87%)Rejected-AOC | ₹9.7 L+₹8,345 (0.87%) | L2 | Rejected-AOC Reject |
| 3 | L3₹10.1 L+₹45,620 (4.74%)Rejected-AOC | ₹10.1 L+₹45,620 (4.74%) | L3 | Rejected-AOC Reject |
| Sl No | Description | Qty | Unit | Himalyaboring compay L1 | Shiv Drillers L2 | Rajinder Kumar Thakur L3 |
|---|---|---|---|---|---|---|
| 1.00 | Transportation of suitable truck mounted DTH & ODEX percussion Clayx/RC drilling Rigs along withg necessary accessories etc. at site of work and errection of rig including testing etc. complete in all respect as per direction of Engineer-in-Charge. | 1 | No | 5,100 ₹5,100 Lowest | 5,200 ₹5,200 | 5,500 ₹5,500 |
| 2.00 | Drilling bores of 200 mm dia as per IS 2800: 1991 using ODEX (TUBEX) attachment required drilling in collapsible strata comprising of boulders, pebbles, gravels, sand, silt, clay, etc including cost of attachments consumable stores, bits, water, POL etc, complete with system of simultaneous lowering of 150 mm nominal bore, 5.00 mm thick MSERW fin cut casing pipe which will be welded together using 2.5 mm or 3.25 mm dia. advani/ oerlikon electrodes with one plain end and the other end chamfered to 50 degrees including removing paint on the area to be welded, inclusive of the cost of bio-degradable and non toxic foam flush etc. complete in all respect as per directions of Engineer-in-charge. MSERW fin cut casing pipe, casing shoe & bit tube as per requirement of ODEX to be paid separately. | 104 | Rmt | 5,500 ₹5,72,000 Lowest | 5,550 ₹5,77,200 | 5,700 ₹5,92,800 |
| 3.00 | Supplying and lowering of IS marked 175 mm N.B,.6.40 mm thick fin-cut, MSERW casing pipes as per IS:4270-2001 and requirement of ODEX attachment from approved manufacturers, complete in all respects, as per directions of the Engineer-in-charge. | 104 | Rmt | 3,500 ₹3,64,000 Lowest | 3,520 ₹3,66,080 | 3,700 ₹3,84,800 |
| 4.00 | Providing and fixing suitable casing shoe and bit tube as per requirement of ODEX attachment complete in all respects as per directions of the Engineer-in-charge. | 1 | No | 5,000 ₹5,000 Lowest | 5,200 ₹5,200 | 6,000 ₹6,000 |
| 5.00 | Collection and preservation of soil samples in polythene bags complete in all respects as per directions of the Engineer-in-charge. | 1 | No | 30 ₹30 Lowest | 45 ₹45 | 50 ₹50 |
| 6.00 | Development of bore well and yield testing with air compressor through 900 V-notch and disinfections etc. complete in all respects as per IS:2800-1979 and as per directions of the Engineer-in-charge. | 1 | No | 5,000 ₹5,000 Lowest | 5,350 ₹5,350 | 6,000 ₹6,000 |
| 7.00 | Providing and fixing filter made up of parent casing pipe with duly drilled holes alround the pipe complete in all respects as per directions of the Engineer-in-charge. | 4 | Rmt | 2,600 ₹10,400 Lowest | 2,700 ₹10,800 | 3,000 ₹12,000 |
Tender Value
₹9.6 L
EMD Value
₹19,133
Closing Date
16 Apr 2026, 5:00 pmClosed
Executive Engineer
Executive Engineer, Jal Shakti Division Bhoranj
Providing Installation of 200 mm dia Bore Well at Jahu near existing LWSS Jakhyol 2nd and Karohta in G.P. Jahu
2026_HPIPH_133838_1
81-141 dt. 09.04.2026
Open Tender
Civil Works
Item Rate
120 days
Executive Engineer, Jal Shakti Division Bhoranj
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
₹19,133
9 Sept 2026
9 Apr 2026
17 Apr 2026
9 Apr 2026
16 Apr 2026
9 Apr 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| - | Transportation of suitable truck mounted DTH & ODEX percussion Clayx/RC drilling Rigs along withg necessary accessories etc. at site of work and errection of rig including testing etc. complete in all respect as per direction of Engineer-in-Charge. | - | No | - | - |
| - | Drilling bores of 200 mm dia as per IS 2800: 1991 using ODEX (TUBEX) attachment required drilling in collapsible strata comprising of boulders, pebbles, gravels, sand, silt, clay, etc including cost of attachments consumable stores, bits, water, POL etc, complete with system of simultaneous lowering of 150 mm nominal bore, 5.00 mm thick MSERW fin cut casing pipe which will be welded together using 2.5 mm or 3.25 mm dia. advani/ oerlikon electrodes with one plain end and the other end chamfered to 50 degrees including removing paint on the area to be welded, inclusive of the cost of bio-degradable and non toxic foam flush etc. complete in all respect as per directions of Engineer-in-charge. MSERW fin cut casing pipe, casing shoe & bit tube as per requirement of ODEX to be paid separately. | - | Rmt | - | - |
| - | Supplying and lowering of IS marked 175 mm N.B,.6.40 mm thick fin-cut, MSERW casing pipes as per IS:4270-2001 and requirement of ODEX attachment from approved manufacturers, complete in all respects, as per directions of the Engineer-in-charge. | - | Rmt | - | - |
| - | Providing and fixing suitable casing shoe and bit tube as per requirement of ODEX attachment complete in all respects as per directions of the Engineer-in-charge. | - | No | - | - |
| - | Collection and preservation of soil samples in polythene bags complete in all respects as per directions of the Engineer-in-charge. | - | No | - | - |
| - | Development of bore well and yield testing with air compressor through 900 V-notch and disinfections etc. complete in all respects as per IS:2800-1979 and as per directions of the Engineer-in-charge. | - | No | - | - |
| - | Providing and fixing filter made up of parent casing pipe with duly drilled holes alround the pipe complete in all respects as per directions of the Engineer-in-charge. | - | Rmt | - | - |
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.41 MB
BOQ_197845.xls
BOQ • 0.24 MB
Termsandconditions.pdf
Tender Documents • 0.14 MB
PWD8.pdf
Tender Documents • 4.23 MB
Form6.pdf
Tender Documents • 0.36 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .